• Title/Summary/Keyword: Yield-type

Search Result 1,980, Processing Time 0.037 seconds

The Characteristics of a Superposed Discharge Type Ozonizer with Variation of Mesh in Internal Electrode (내부전극 조밀도 변화에 따른 중첩방전형 오존발생기의 특성)

  • Song, Hyun-Jig
    • Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.19 no.5
    • /
    • pp.87-93
    • /
    • 2005
  • In order to develope high concentration$\cdot$yield ozonizer, superposed discharge type ozonizer using overlap of silent discharge and internal electrode of mesh type has been designed and manufactured. It consists of three electrodes(central electrode, internal electrode and external electrode) and double gaps(gap between central electrode and internal electrode, gap between internal electrode and external electrode). Therefore, ozone is generated by overlapping silent discharges generated between the gaps respectively for which the AC high voltages applied to the internal electrode and the external electrode has a $180{[^\circ]}$ phase difference and for which the central electrode is a ground Ozone generation characteristics proportional to mesh of internal electrode by increasing of discharge electrode and controlling of discharge power density. As a result, the in maximum ozone concentration, generation, and yield can be obtained 17,720[ppm], 5.4[g/h], and 205[g/kwh] respectively.

Engineering Critical Assessement for an Independent Type-B LNG Cargo Tank (독립형 LNG 화물창의 공학적 결함 평가)

  • Jae Hoon Seo;Kyu-Sik Park;Inhwan Cha;Joonmo Choung
    • Journal of the Society of Naval Architects of Korea
    • /
    • v.60 no.4
    • /
    • pp.213-221
    • /
    • 2023
  • The demand for Liquefied Natural Gas (LNG) carriers and LNG-fueled ships has significantly increased in recent years due to the sulfur-oxide emission regulations by the International Maritime Organization (IMO). The main goal of this paper is to introduce the process for the Engineering Critical Assessment (ECA) of IMO independent type-B cargo tanks made from 9% nickel alloy. A methodology proposed by the British Standard was used to conduct ECA for any structure with initial flaws. Based on this standard, a Matlab code was developed to perform ECA. Coarse mesh Finite Element Analysis (FEA) was performed on an independent type-B LNG cargo tank with a capacity of 15,000 m3. The location with the highest development of maximum principal stress was identified at the bottom of the cargo tank. Fine mesh FEA was performed to obtain the stress range required for ECA. The dynamic cargo tank loads used for FEA were determined using some ship rules presented by Det Norske Veritas. As a result of performing a 20-year long-term crack propagation analysis with a semi-elliptical surface crack, the fracture-to-yield ratio exceeded the Fracture Assessment Line (FAL) and some structural reinforcement was necessary. Performing a 15-day short-term crack propagation analysis, the fracture-to-yield ratio remained within the FAL, and no significant LNG leaks were expected. This paper is believed to provide a guide for performing ECA of LNG cargo tanks in the future by providing the basic theory and application sample necessary to perform ECA.

The Cooking Characteristics of High-yielding Japonica and Tongil Type Rice (일반계 및 통일계 다수확 쌀 품종의 취반 특성)

  • Park, Sun-Jin;Park, Kyoung-Whan;Shin, Mal-Shick
    • Korean journal of food and cookery science
    • /
    • v.27 no.6
    • /
    • pp.735-743
    • /
    • 2011
  • This study examined physicochemical properties of rice grains and qualities of cooked white rice of the high yielding, Japonica type, specifically Druryechanbyeo and Boramchanbyeo, and of the Tongil-type, specifically Hanarumbyeo and Andabyeo. The changes of water absorption rate of rice grains, their textural properties and a sensory evaluation of the cooked rice s were analyzed. All varieties were short grain. The length and width of Tongil type rice grains larger than those of Japonica type. The water absorption of white rice grains increased rapidly until 1 hr when soaking and after that increased slightly. The water absorption of Druryechan grain was higher than that of the Boramchan. The sensory evaluation results showed that the Japonica type cooked rices had a higher value for overall quality than the Tongil type cooked rices. With regard to the textural properties of the cooked rices, the hardness of Boramchan and Hanarum varieties showed higher than that of Druyechan and Anda varieties. Adhesiveness, springiness and chewiness were not significantly different between varieties (p<0.05).

Effects of Liming and Inoculation on Growth and Yield of Soybean in Paddy-Upland Rotational Cropping (답전윤환답(沓田輪換沓)의 콩 생육(生育) 및 수량(水量)에 미치는 토양산도(土壤酸度) 보정(補整)과 근류균(根瘤菌) 접종효과(接種效果))

  • Cho, Seang-Ho;Hwang, Young-Hyun;Lee, Sang-Chull
    • Current Research on Agriculture and Life Sciences
    • /
    • v.15
    • /
    • pp.7-16
    • /
    • 1997
  • The effects of liming and inoculation of nodule bacteria on the growth and yield of soybeans in the 1st and 3rd year paddy-upland rotated paddy fields was investigated. Compared with the 1st rotated field, the degree of nodulation was much higher in the 3rd rotated one with greater difference at flowering stage than at the early stage of soybean growth. At the same time, greater difference in the degree of nodulation was also recognized between soybean varieties. In the 3rd year rotated field, a great deal of nodulation effect was recognized in the no-limed field but not in the limed one. The growth of soybean was not much affected by liming and nodulation at early stage but it was much increased by liming at flowering stage, especially in Williams 79, indeterminate type variety. Most of yield components and yield of soybean at maturity was much increased by liming with greater in Williams 79 than in Namhaekong. Nodulation effect on the yield components and yield was great in the no-limed filed but not in the limed one for both varieties. The yield and yield components of soybean, without no relation with liming and nodulation, was much great in the 3rd year rotated paddy fields than in the 1st year one, which was inferred that the more rotated fields the more yield and better growth of soybeans could be possible in the paddy-upland rotatonal soybean croppings.

  • PDF

Growth and yield responses of rice varieties to various soil water deficit conditions under different soil types

  • Kikuta, Mayumi;Samejima, Hiroaki;Magoti, Rahab;Kimani, John M.;Yamauchi, Akira;Makihara, Daigo
    • Proceedings of the Korean Society of Crop Science Conference
    • /
    • 2017.06a
    • /
    • pp.322-322
    • /
    • 2017
  • To avoid drought stress under rainfed upland conditions, it is important for rice to efficiently utilize water at shallow soil layers supplied by rainfall, and access to water retained in deer soil layers. The root developmental characteristics of rice, which play important role in the adaptability to drought conditions, vary depending on the variety. Moreover, water availability for plant differs depending on the soil types that have different physical properties such as water holding capacity, permeability, capillary force, penetration resistance, etc. In this study, we evaluated growth and yield responses of rice varieties to various soil water deficit conditions under three different soil types. The experiment was conducted in a plastic greenhouse at the Kenya Agricultural and Livestock Research Organization-Mwea from October 2016 to January 2017. Two upland varieties (NERICA 1 and 4) and one lowland variety (Komboka) were grown in handmade PVC pots (15.2 cm diameter and 85.0 cm height) filled with three different types of soil collected from major rice-growing areas of the country, namely black cotton (BC), red clay (RC), and sandy clay (SC). Three watering methods, 1) supplying water only from the soil surface (W1), 2) supplying water only from the bottom of the pots (W2), and 3) supplying water both from the soil surface and the bottom of pots (W3), were imposed from 40 days after sowing to maturity. Soil water content (SWC) at 20, 40, and 60 cm depths was measured regularly. At the harvesting stage, aboveground and root samples were collected to determine total dry weight (TDW), grain yield, and root length at 0-20, 20-40, 40-60, and 60-80 cm soil layers. Irrespective of the watering methods, the greatest root development was obtained in RC, while that in BC was less than other two soils. In BC, the degree of yield reduction under W1 was less than that in RC and SC, which could be attributed to the higher water holding capacity of BC. In RC, the growth and yield reduction observed in all varieties under W1 was attributed to the severe drought stress. On the other hand, under W2, SWC at the shallow soil depth in RC was maintained because of its higher capillary force compared with BC and SC. As the result, growths and yields in RC were not suppressed under W2. In SC, deep root development was not promoted by W2 irrespective of the varieties, which resulted in significant yield losses. Under W1, the rice growth and yield in SC was decreased although shallow root development was enhanced, and the stomatal conductance was maintained higher than RC. It was suspected that W1 caused nutrients leaching in SC because of its higher permeability. Under rainfed conditions, growth and yield of rice can be strongly affected by soil types because dynamics of soil water conditions change according to soil physical properties.

  • PDF

Varietal Differences in Agronomic Characters under Different Altitudinal Locations with Equal Latitude in Paddy Rice (동일위도상 표고의 차이에 따른 수도품종의 수량형질변이)

  • Park, S.Z.;Lee, E.W.;Lee, B.W.
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.28 no.2
    • /
    • pp.164-172
    • /
    • 1983
  • The present study was conducted to investigate the variations in morphological traits, yield and yield-related components of rice cultivars exposed to different weather conditions by growing at the locations with different altitude but with equal latitude. Three Japonica varieties (Daegoldo, Jinheung, Shin #2) and three Tongil type semi-dwarf varieties(Josaengtongil, Suweon 287, wx 817-65-2-3) were seeded at Suweon on April 21 and transplanted at Suweon ($127^{\circ}$ N37 20', altitude 37m) and Jechun ($128.2^{\circ}$, N37 10', altitude 280-300m) on June 1 with the spacing of 30 $\times$ 15 em. The morphological traits, yield and yield-related components were measured. Culm length, paincle length and 1000-grain weight showed a little increase in Japonica varieties in Jechun as compared to those in Suweon and vice versa in semi-dwarf varieties, showing no significant differences. Number of panicles, per hill and number of spikelets per panicle among yield-related components showed remarkable increase in all varieties in Jechun as compared to those in 'Suweon but such inter-locational differences differed with varieties within varietal group and between varietal groups. On the contrary, grain fertility was higher in Suweon than that in Jechun and in Japonica varieties than that in semi-dwarf varieites , showing greater inter-locational difference in semi-dwarf varieties. Among Japonica varieties Jinheung and Shin #2 showed remarkable increase in yield in Jechun as compared to that in Suweon but in semidwarf varieties it was just the opposite. The importance of each of the yield-related component contributing to yield showed similar tendency 'regardless of locations in Japonica varieties. However, it was evidently different between locations in semidwarf varieties, where number of spikelets per panicle showed greatest direct effect on yield in Suweon but in Jechun so did grain fertility followed by the number of spikelets per panicle.

  • PDF

Influence of Different Phosphorus Fertilizer to Barley Growth and Yield (맥류에 대한 각종 인산질 비료의 비효검정 시험)

  • Cho, C.H.;Ha, Y.W.;Hong, B.H.;Kim, D.K.;Huh, W.S.;Lee, J.S.;Kang, J.C.;Chai, J.S.;Lee, D.K.;Park, K.Y.
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.13
    • /
    • pp.119-126
    • /
    • 1973
  • In order to investigate the effects of phosphorous fertilizer such as fused Phosphate, compound fertilizer and triple phosphate on barley(growth and yield at the fixed level of nitrogen and potassium, 4 level of hosphorous) has been tested at Suwon. Iri. Kwangju ani Daegu with randomized completeblock design. The results obtained could be summarized as follows. 1. In four locations. increased application of phosphorus have brought earlier maturity in barley regardless the type of fertilizer but fused phosphate considered to have more effects on stimulation of maturity of barley compare with the others. 3. Fused phosphate increased yield higher by-8kg/10a application compare with the same level of compound fertilizer and triple phosphate but there was no differences in yield at 12kg/10a phosphate but there was no differences in yield at 12kg/l0a application among the fertilizers except Kwangju and Suwon. 3. Grain weight was considerably higher in application of fused phosphate Thus are considered effects phosphate. 4. Optimum amount of phosphorous fertilizer was considered 8kg/l0a. Application of 4kg per 10a produced lower yield than 8kg and slightly or no increased yield was observed in 12kg application. 5. Among the 4kg/10a applied condition of phosphorous fertilizers, yield was decreased at fused phosphate treatment compare with the others and this fact resulted supposedly due to the lower portion of valid phosphorus in fused phosphate because of its citric acid solubility. At level of 12kg/10a application fused phosphate was considered more effective in yield increment.

  • PDF

A Study on Rheological Properties of Cement Paste using Expansive Additives by Kind & Replacement Ratio (팽창재 종류 및 치환율에 따른 시멘트 페이스트의 레올로지 특성)

  • Park, Chun-Young;Kang, Byeung-Hee
    • Journal of the Korea Institute of Building Construction
    • /
    • v.8 no.2
    • /
    • pp.99-106
    • /
    • 2008
  • To improve concrete tensile strength and bending strength, New plan that have more economical and simple manufacture process is groped. By an alternative plan, chemical pre-stressed concrete is presented. In this study, we analyzed the rheological properties of cement paste with the kind and replacement ratio of k-type CSA type expansive additives that is used mainly in domestic. and we suggested that the algorithm of a mixing plan in the chemical pre-stressed concrete and from this, we presented the basic report for the right mixing plan. From the results, Flow increased more or less according to use of expansive additives. This phenomenon was observed by increasing paste amount that shows as substitution for expansive additives that specific gravity is smaller than that of cement. As linear regression a result supposing paste that mix expansive additives by Bingham plastic fluid. The shear rate and shear stress expressed high interrelationship. therefore, flow analysis of quantitative was available. The plastic viscosity following to replacement ratio of expansive additives is no change almost, the yield value is decreased in proportion to the added amount of expansive additives. Through this experiment, we could evaluate rheological properties of cement paste using the expansive additives. Hereafter by an additional experiment, we must confirm stability assessment of material separation by using the aggregate with the kind and replacement ratio of expansive additives.

Morphological Traits of S598A Sweetpotato as an Industrial Starch Crop

  • Kim, Kyung-Moon;Kim, Ji-Yeon;Kim, Jung-Il
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.54 no.4
    • /
    • pp.422-426
    • /
    • 2009
  • Sweetpotato is one of the important starch crops, current more considered as an industrial crop rather than food because it has higher starch content (over 80% of biomass), it is used for bio resources for industrial area. In this study, we generated S598A (a mutant gene of oat phytochrome A) sweetpotato plant using Agrobacterium-transformation method. Morphological characteristics of S598A plant were compared with the wild type sweetpotato, S598A had darker green leaves, increased chlorophyll content higher than to two-fold, delayed leaf senescence, shorter plant height (60% shorter than that of the wild type), more number of leaves and petioles about 1.8-fold, shorter petiole length (30% shorter), 1.2-fold more branches and 1.6-fold thicker stem diameters. From this study, S598A plants with such phenotypic characteristics might be able to use the solar energy efficiently, to have increased tolerance to biotic and abiotic stresses and finally to increase productivity (not only starch yield but also root biomass yield). S598A sweetpotato lines are under field trials.

Improvement of Fungal Cellulase Production by Mutation and Optimization of Solid State Fermentation

  • Vu, Van Hanh;Pham, Tuan Anh;Kim, Keun
    • Mycobiology
    • /
    • v.39 no.1
    • /
    • pp.20-25
    • /
    • 2011
  • Spores of Aspergillus sp. SU14 were treated repeatedly and sequentially with $Co^{60}$ ${\gamma}$-rays, ultraviolet irradiation, and N-methyl-N'-nitro-N-nitrosoguanidine. One selected mutant strain, Aspergillus sp. SU14-M15, produced cellulase in a yield 2.2-fold exceeding that of the wild type. Optimal conditions for the production of cellulase by the mutant fungal strain using solid-state fermentation were examined. The medium consisted of wheat-bran supplemented with 1% (w/w) urea or $NH_4Cl$, 1% (w/w) rice starch, 2.5 mM $MgCl_2$, and 0.05% (v/w) Tween 80. Optimal moisture content and initial pH was 50% (v/w) and 3.5, respectively, and optimal aeration area was 3/100 (inoculated wheat bran/container). The medium was inoculated with 25% 48 hr seeding culture and fermented at $35^{\circ}C$ for 3 days. The resulting cellulase yield was 8.5-fold more than that of the wild type strain grown on the basal wheat bran medium.