• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.5
• /
• pp.38-44
• /
• 2015

In this paper, the vibration control effect of the Exo-type damping system was investigated by applying the Kagome dampers to 15-story and 20-story frame structure apartment. A new Exo-type damping system composed of the dampers and supporting column was proposed in the previous work and numerical analysis were performed to investigate the effects of optimum stiffness ratio between controlled structure and supporting column, the size of damper and yield ratio of the damper. The numerical analysis results of a structure with Exo-type damping system up to the third story showed that the stiffness ratio should be higher than 7.0 and the damper device yield ratio be at least 8.0% ($V_{damper}/V_{base\;shear$) to effectively reduce the base shear and the maximum drift of the uppermost story. When the Exo-type damping system was installed up to the fifth story, the stiffness ratio should be higher than 2.5 and damper device yield ratio needs to be at least 3.5% ($V_{damper}/V_{base\;shear$) for obtaining the target performance.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.45 no.5
• /
• pp.85-96
• /
• 2003

The Revised Universal Soil Loss Equation (RUSLE) has been used in over 100 countries to estimate potential long-term soil erosion from the field. However, the RUSLE estimated soil erosion cannot be used to estimate the sediment delivered to the stream networks. For an effective erosion control, it is necessary to compute sediment delivery ratio (SDR) for watershed and sediment yield at watershed outlet. Thus, the Sediment Assessment Tool for Effective Erosion Control (SATEEC) was developed in this study to compute the sediment yield at any point in the watershed. To compute spatially distributed sediment yield map, the RUSLE was first integrated with the ArcView GIS and three area based sediment delivery ratio methods were incorporated in the SATEEC. The SATEEC was applied to the Bangdong watershed, Chuncheon, Gangwon Province to demonstrate how it can be used to estimate soil loss and sediment yield for a watershed. The sediment yield using USDA SDR method is 8,544 ton/year and 4,949 ton/year with the method by Boyce. Thus, use of watershed specific SDR is highly recommended when comparing the estimated sediment yield with the measured sediment data. The SATEEC was applied with hypothetical cropping scenario and it was found that the SATEEC can be used to assess the impacts of different management on the sediment delivered to the stream networks and to find the sediment source areas for a reach of interest. The SATEEC is an efficient tool to find the best erosion control practices with its easy-to-use interface.

• Korean Journal of Plant Resources
• /
• v.15 no.2
• /
• pp.123-127
• /
• 2002

In order to obtain basic informations for selecting early maturing rice varieties which is suitable for early cropping before Alisma plantago in the southern part of Korea. Eleven rice varieties were grown from May to September in 1999∼2001 at Sunchon Youngieon Experiment Field and yield components and yield of plants were investingated. Early maturing rice cv. Jinbubyeo showed higher rough rice yield than any other varieties used in the experiment. It showed high yield components, culm length, panicle length, number of panicles per plant, number of spikelets per panicle and ratio of ripened grains. therefore, it was concluded that Jinbubyeo was the most suitable variety with high yield for the cultivation before Alisma plantago at the southern part of Korea. The heritability of culm length number of spikelets per panicle and rough rice yield were high and that of panicle length number of panicle per plant, ratio of ripened grain and 1,000 grain wt. of milled rice were low. The rough rice yield showed highly significant positive correlations with culm length, panicle length, number of spikelets per panicles and ratio of ripened grains.

• Composites Research
• /
• v.36 no.5
• /
• pp.369-376
• /
• 2023

This study focuses on investigating the influence of epoxy polymer crosslinking density, a crucial aspect in composite material matrices, on the yield surface using molecular dynamics simulations. Our approach involved generating epoxy models with diverse crosslinking densities and subjecting them to both uniaxial and multiaxial deformation simulations, accounting for the elasto-plastic deformation behaviors. Through this, we obtained key mechanical parameters including elastic modulus, yield point, and strain hardening coefficient, all correlated with crosslinking conversion ratios. A particularly noteworthy finding is the rapid expansion of the yield surface in the biaxial compression region with increasing crosslinking ratios, compared to the uniaxial tensile region. This unique behavior led to observable yield surface variations, indicating a significant pressure-dependent relationship of the yield surface considering plastic strain and crosslinking conversion ratio. These results contribute to a deeper understanding of the complex interplay between crosslinking density and plastic mechanical response, especially in the aspect of multiaxial deformation behaviors.

• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.79-84
• /
• 2001

The effect of spray characteristics on desulfurization yield was evaluated by performing experiments with pilot spray drying sorber (SDS). Among the variables of operating conditions, the slurry-spraying conditions were chosen as major parameters; Stoichiometric ratio and Sauter mean diameter of slurry droplet were varied for the different gas temperatures and $SO_{2}$ concentrations in the inlet gas flow. From the experimental results, we proposed semi-empirical models of desulfurization yield for both Stoichiometric ratio and Sauter mean diameter of droplets. The optimal condition of spray can be determined based on these results, which might be applied to the design or scale-up of SDS systems.

• Journal of Biosystems Engineering
• /
• v.28 no.4
• /
• pp.325-334
• /
• 2003

Pinosylvin, a stilbenoid phytoalexin, is a health ingredient to be extracted from pine leaves. In this study, ultrasonication-assisted extraction process for manufacturing extracts with high content of pinosylvin from pine leaves was investigated. As process and system variables, ultrasonic power, sonication time and solvent ratio were selected. According to the experimental results, the effective yield of pinosylvin increased with the increase of ultrasonic power and sonication time and the decrease of solvent ratio. When the ultrasonic power of 2400 W/L was added to the solution of pulverized pine leaves of 8 g per 1 L of a solvent for 10 minutes, yield of extracts and purity, effective yield and concentration ratio of pinosylvin were 0.3166 g/g, 0.7247 mg/g, 0.2294 mg/g and 23.0, respectively.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.51 no.3
• /
• pp.187-190
• /
• 2006

In order to produce hemp with low cannabinoids and appropriate fiber yield, seeds of the IH3 (non drug type germplasm) and local variety (drug type cultivar) were mixed to 1:1, 2:1, 3:1 on base of seed weight ratio and cultivated for seed production. In the seed yield trial, the weight of 1000 grains were around 21 g, which was increased in proportion to the ratio of IH3 seeds but seed yield were 100 kg/10a, which were not significantly different by the seeds-mixing ratio. In fiber yield trials with seeds from seed yield trial, fiber yield ranged $193{\sim}198kg/10a$ which was not significantly different by the seeds mixing ratio but the content of THC(${\Delta}$-9-tetrahydrocannabinol) was lowered in proportion to the ratio of IH3 seeds. Variation of THC and CBD (Cannabidiol) level in the 150 plant cultivated with various seed mixing ratio reflected that the percentage of drug and intermediate type were decreased but non drug type were increased in proportion to the ratio of IH3 seeds.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.5
• /
• pp.650-657
• /
• 2002

Two experiments were conducted to evaluate the effects of forage:concentrate ratios and feeding principles on milk yield, milk composition, body weight change, postpartum oestrus and feed cost. A total of 36 crossbred F1 cows (Holstein Friesian${\times}$Local Yellow) in the 8th week of lactation were used. In each experiment, animals were divided into three groups using a randomized block design according to the milk yield of the previous eight weeks. Cows were fed 30, 50 and 70% concentrate in the diet based on DM. In experiment 1 (Fc), cows were given the same amount of DM with constant ratios of forage and concentrate within treatments. In experiment 2 (Fa), cows were given the same constant amounts of concentrate as in experiment 1 and ad libitum forage. The forage consisted of a natural grass mixture based on 5 species of grasses with high nutritive values. There was no difference in total DM intake between treatments within experiments. However, cows fed forage ad libitum had higher DM intakes compared to cows fed constant forage (1.6, 4.5 and 9.5% for cows fed 70, 50 and 30% forage, respectively). Daily milk yield of cows fed forage ad libitum was higher than that of cows fed constant forage:concentrate ratio. Within experiment, milk yield was highest for cows fed 30% DM forage, followed by cows fed 50% and then cows fed 70% forage (11.17, 10.98 and 10.71 for the 30Fc, 50Fc and 70Fc cows; 11.73, 11.16 and 10.81 kg for the 30Fa, 50Fa and 70Fa cows, respectively). Decreased forage ratio in the diets resulted in decreased milk fat content and tended to increase milk protein. Increased concentrate ratio in the diet and feeding forage ad libitum increased body weight gain. The effect of forage:concentrate ratio on postpartum oestrus was not significant. The feed cost per kg milk produced was lowest for the cows fed 70% forage. It is concluded that increased ratio of concentrate resulted in increased body weight gain, milk yield, milk protein, and decreased milk fat. Feeding forage ad libitum increased feed intake, milk yield and body weight gain. The ratio of 50% forage is more suitable for milk production and animal condition, but in terms of feed cost and under the conditions of small dairy farmers, the 70% ad libitum forage feeding is recommended.

• Food Science and Biotechnology
• /
• v.14 no.6
• /
• pp.836-840
• /
• 2005

Extraction characteristics of Bonus species of Brassica oleracea var. capita and functional properties of corresponding extract were monitored by response surface methodology (RSM). Maximum extraction yield of 44.07% was obtained at ratio of solvent to sample of 27.94 mL/g, ethanol concentration of 24.35%, and extraction temperature of $55.21^{\circ}C$. At ratio of solvent to sample, ethanol concentration, and extraction temperature of 21.11 mL/g, 58.53%, and $68.83^{\circ}C$, respectively, maximum electron-donating ability was 48.44%. Maximum inhibitory effect on tyrosinase was 68.94% at ratio of solvent to sample, ethanol concentration, and extraction temperature of 24.08 mL/g, 10.49%, and $78.71^{\circ}C$, respectively. Superoxide dismutase (SOD) showed maximum pseudo-activity of 24.78% at ratio of solvent to sample of 22.66 mL/g, ethanol concentration of 45.69%, and extraction temperature of $93.81^{\circ}C$. Based on superimposition of four-dimensional RSM with respect to extraction yield, electron-donating ability, and pseudo-activity of SOD, optimum ranges of extraction conditions were ratio of solvent to sample of 20-30 mL/g, ethanol concentration of 35-65%, and extraction temperature of $50-80^{\circ}C$.

• Journal of Microbiology and Biotechnology
• /
• v.24 no.11
• /
• pp.1542-1550
• /
• 2014

Co-digesting molasses wastewater and sewage sludge was evaluated for hydrogen production by response surface methodology (RSM). Batch experiments in accordance with various dilution ratios (40- to 5-fold) and waste mixing composition ratios (100:0, 80:20, 60:40, 40:60, 20:80, and 0:100, on a volume basis) were conducted. Volatile solid (VS) concentration strongly affected the hydrogen production rate and yield compared with the waste mixing ratio. The specific hydrogen production rate was predicted to be optimal when the VS concentration ranged from 10 to 12 g/l at all the mixing ratios of molasses wastewater and sewage sludge. A hydrogen yield of over 50 ml $H_2/gVS_{removed}$ was obtained from mixed waste of 10% sewage sludge and 10 g/l VS (about 10-fold dilution ratio). The optimal chemical oxygen demand/total nitrogen ratio for co-digesting molasses wastewater and sewage sludge was between 250 and 300 with a hydrogen yield above 20 ml $H_2/gVS_{removed}$.