• Asian-Australasian Journal of Animal Sciences
• /
• v.10 no.2
• /
• pp.196-200
• /
• 1997

Glasshouse investigations were carried out to investigate the development and yield of Atylosia scarabeoides on soils of the northern guinea savanah zone of Nigeria. Seeds were sown at four rates 50, 75, 100 and 125 kg/ha. Single superphosphate (SSP) fertilizer was applied at sowing at four rates 0, 60, 90 and 120 kg/ha. Seeding (plant) population at one month and at harvest was significantly (p < 0.01) influenced by seeding rate but not fertilizer level. Fresh herbage yield was strongly (p < 0.01) dependent on fertilizer level, with the highest (not significant) dry matter yield at 90 kg SSP/ha. Seeding rate had no significant effects on herbage yield. The crude protein content of herbage rose with increase in fertilizer level although there were no significant differences between the various seeding and phosphorus rates. No significant interactions were observed between seeding rate and phosphorus lever. The yields were generally high, indicating good prospects for pasture development with A. scarabeoides in the zone, although field trials would be of benefit.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.11a
• /
• pp.87-90
• /
• 2006

The experimental study has been done for two kinds of pelletized RDFs to Investigate the carbonization effect to the chlorine concentrations, the heating value and the yield of Produced char in variable conditions of the carbonizing temperature and reaction time. One(RDF-1) is made of 100% wasted plastics and the other(RDF-2) is made of 60% wasted paper with 40% wasted plastics. The screw type carbonizer heated Indirectly by oil burner was used for the experiment and RDF feeding rate was 3kg/hr. The carbonizing temperature was 300, 350 400 and $45^{\circ}C$ and the reaction tine was 5, 10 and 15 minutes respectively. As the increase of carbonizing reaction time and temperature, the chlorine reduction rate was increased and oppositely the yield of char was decreased At the temperature of $400^{\circ}C$ and reaction time of 10 minutes the chlorine reduction rate was 60% and the char yield rate was 80% for the RDF-1 and those of RDF-2 were 80% and 75%, respectively. Additional activation experiment to the char produced from RDF-2 was done in the activation reactor by hot steam supply. As the increase of activation time the iodine number was increased. At the activation time of 20 minutes the iodine number was 552mg/g and the yield of activated carbon was 16%.

• Industrial Engineering and Management Systems
• /
• v.4 no.2
• /
• pp.158-164
• /
• 2005

Kusukawa and Ohta presented the $CS_{CQ-r}$ chart to monitor the process defect $rate{\lambda}$ in high-yield processes that is derived from the count of defects. The $CS_{CQ-r}$ chart is more sensitive to $monitor{\lambda}$ than the CQ (Cumulative Quantity) chart proposed by Chan et al.. As a more superior chart in high-yield processes, we propose a Synthetic chart that is the integration of the CQ_-r chart and the $CS_{CQ-r}$chart. The quality characteristic of both charts is the number of units y required to observe r $({\geq}2)$ defects. It is assumed that this quantity is an Erlang random variable from the property that the quality characteristic of the CQ chart follows the exponential distribution. In use of the proposed Synthetic chart, the process is initially judged as either in-control or out-of-control by using the $CS_{CQ-r}$chart. If the process was not judged as in-control by the $CS_{CQ-r}$chart, the process is successively judged by using the $CQ_{-r}$chart to confirm the judgment of the $CS_{CQ-r}$chart. Through comparisons of ARL (Average Run Length), the proposed Synthetic chart is more superior to monitor the process defect rate in high-yield processes to the stand-alone $CS_{CQ-r}$ chart.

• Journal of the Korean Society of Tobacco Science
• /
• v.12 no.2
• /
• pp.91-101
• /
• 1990

A field experiment was conducted to find out the effects of field productivity, variety and nitrogen rate on the yield, quality, chemical constituents and physical properties of burley cured leaf in three field with different productivity(Degree of field productivity: A ; high, B ; medium, C : low) during successive two years(1988~89). The yield and quality were remarkably lowered when nitrogen fertilizer being applied much in low productive field. As compared with Burley 21, KB101 showed high yield, particularly the yield of KB101 in low productive field was relatively high. The effect of nitrogen rate on the yield was somewhat different according to field productivity and production year. When the nitrogen fertilizer being applied above 22.5kg/10a, the added nitrogen had no effect on the yield. Total nitrogen content of cured leaf grown in low productive field was high while total alkaloid was low, therefore total alkaloid/total nitrogen ratio was remarkably low. The lightness, red and yellow color of cured leaf grown in low productive field was remarkably low. As compared with Burley 21, the contents of total alkaloid and total nitrogen and shatter resistance index of cured leaf was somewhat low, while the filling power, lightness, red and yellow color were slightly high. Total nitrogen content of cured leaf was increased remarkably by nitrogen addition, but total alkaloid was not increased though the nitrogen fertilizer being applied above 22.5kg/10a. The filling power and shatter resistance index of cured leaf grown in high nitrogen plot, and the lightness and yellow color were low while the red color was relatively high. It comes into question that the visual quality being increased as well as increment of yield and nitrogenous compounds by nitrogen addition in high productive field. In low productive field, it is considerable that nitrogen addition for high yield should be prohibited because it causes the decrement of yield and quality, on the contrary.

• Asian-Australasian Journal of Animal Sciences
• /
• v.6 no.1
• /
• pp.123-126
• /
• 1993

Hand dibbling in rows produced higher (p < 0.05) fresh and dry matter (DM), fodder yield, higher plant density and cob yield than broadcasted. However, the varying seed rates (40, 50 and 55 kg/ha) did not affect (p < 0.05) the fresh and DM yield and cob yield except for 30 kg/ha seed rate which produced the lowest (p < 0.01). However, the overall average fresh fodder yield and the fresh and DM yield of cob were 24.97, 10.04 and 6.90 t/ha respectively. The overall average plant height (cm), cob/plant (nos.) plant/ha, (nos.) cob/ha (nos.) and weight (g) of one cob were 178, 1.11, 664141, 70104 and 145 respectively for both the sowing methods and the four seed rates. Crude protein contents of maize plant and cob by-products (8.12% and 7.34% respectively) indicated promising cattle feeds along with human food.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.8 no.2 s.21
• /
• pp.77-87
• /
• 2005

The thermomechanical characteristics were evaluated for 17-4PH stainless steel widely used in supersonic airframe subjected to both aerodynamic loading and heating. The thermomechanical tests were conducted under both elevated temperature and rapid heating condition from $1^{\circ}C/sec\;to\;28^{\circ}C/sec$. The thermomechanical behaviors under rapid heating were compared with those of elevated temperature after 1/2 hour exposure in terms of yield stress to investigate the influence of heating rates. A heating rate-yield temperature parameter was suggested for rapid heating based on time-temperature parameters, and master yield stress curve was obtained by using these parameters. The experimental results and methodology from this study can be used as basic engineering data when designing supersonic vehicle structures subjected to aerodynamic loading and severe heating environment.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.25 no.2
• /
• pp.76-81
• /
• 1980

Root yield, number of missing and diseased plant in each line were investigated in various ginseng farms. Root yield per unit area was negatively correlated to missing percentage. Missing percentage showed significant positive correlation with diseased rate. Among lines yield was significantly different in most fields while missing rate was not, indicating that yield of each line is affected by present shading method but disease occurrence is not. Thus there are two ways of yield increase, shading improvement and disease control.

• Korean Journal of Soil Science and Fertilizer
• /
• v.46 no.6
• /
• pp.445-451
• /
• 2013

We researched nitrogen and green manure yield of crotalaria by seeding rate; 50, 60, 70, 80, 90 kg $ha^{-1}$ in upland soil to find out crotalaria's optimal seeding rate. Crotalaria's plant height and number of leaves increased when the harvest time was later regardless of its seeding rate. Its nitrogen content of above-ground part was 19.8 g $ha^{-1}$, and C/N ratio was 22.5. The highest nitrogen content (50.3 g $ha^{-1}$) was found in flowers part, followed by its leaves, roots and stems. The green manure yields of crotalaria increased when the harvest time was later. The green manure yield of crotalaria was biggest in 50kg $ha^{-1}$ which was low in seeding rate. It tended to decrease when the seeding rate was higher, and the nitrogen yield had the same tendency. Therefore, the appropriate seeding rate was 50kg $ha^{-1}$ and the time for application to soil was considered to be the flowering stage.

• Journal of the Korean Society of Tobacco Science
• /
• v.5 no.2
• /
• pp.3-7
• /
• 1983

Three levels of nitrogen, phosphate and potassium were applied to tobacco for the establishment of the optimum rate of the fertilizers for yield and quality. 1 . The rate increment of nitrogen and potassium increased tobacco growth, but phosphate were non - significant between rate. 2. The contents of total-nitrogen and total-alkaloid in the leaf were increased, with the increase of nitrogen rate while the effect of phosphate and potassium were negligible. 3. The yield and quality of the tobacco were increased with the increasing rate of nitrogen and potassium fertilizer but phosphate should little difference.

• Korean Journal of Materials Research
• /
• v.20 no.1
• /
• pp.7-11
• /
• 2010

Yttria stabilized zirconia (Y-CSZ) single crystals show plastic deformation at high temperatures by activating dislocations. The effect of strain rate on the plastic behavior of this crystal was studied. As increasing strain rate from $\varepsilon=1.04\times10^{-5} sec^{-1}$ to $2.08\times10^{-5} sec^{-1}$ the yield drop was suppressed and resulted in higher Young's modulus and yield stress. Dislocation structures of the strained crystals were analyzed using a transmission electron microscope to elucidate the plastic behavior of these crystals. In the early stage of plastic deformation, dislocation dipoles and prismatic dislocation loops were formed in both samples. However, dislocation density was increased by increasing strain rate. Strong sessile dislocations were observed in the sample with higher strain rate, which may cause the higher work hardening.