• Magazine of the Korean Society of Agricultural Engineers
• /
• v.17 no.3
• /
• pp.3795-3814
• /
• 1975

The purpoes of this thesis is to study the effect of the variation of the beginning date of the suspension of irrigation and the length of intermittent suspension period of irrigation in the paddy field on the growth and yield of rice, so as the provide a critical limit of saving irrigation water and an irrigation method to prevent drough damage in rice cultivation. In this experiment, the rice variety adopted was NONGRIM No.29. There were seven main test plot, each test plot having a different beginning date of the suspension of irrigation. A main test plot was susdivided into five small test plots, each having a different length of the suspension period of irrigation. The results obtained in this experiment are summarized as follows: 1. The number of tillers is controlled by the treatment of the suspension of irrigation, its beginning date being early of late. The reductive effects of beginning dates of suspension upon the number of tillers. investigated on July 30, are about 84% for the treatment suspended on July 8, 87% on July 12, and 92% on July 19, respectively, in comparison with the standard plot. However. the suspenion treatments after the foregoing dates does not affect the control of their numbers. On the other hand, the lengths of intermittent suspension periods influence highly on the number of tillers to be restrained considerably, the decrease ratio ranging from 91% to 80% Both treatments on dates and periods are so intermingled that the restraining effects of suspension periods become greater as the dates of its beginning are earlier. 2. The elongation of plant hieghts also restrained considerably by the longer periods and earlier dates of suspension treatments of irrigation. Especially, the effects of the lengths of suspension periods become more serious. 3. Heading dates are delayed by two to five days through the suspension treatments of irrigation. However, the heading stage ends almost on the same day without relation to the differences between the irrigation suspension treatments. In the test plot where the suspension date of irrigation comes after the young panicle forming stage, the heading stage ends one or two days later than in the standard test plot. 4. Both culm lengths and panicle lengths show significant differences in their values, i.e., their lengths are shorter, as the begining dates of irrigation suspension are earlier and the suspension periods are longer. 5. The earlier the beginning date and the longer the period of irrigation suspension, the less is the number of panicles per hill in comparison with the standard plot. 6. The earlier the beginning date and the longer the period of irrigation suspension, the higher is the significant difference in the number of kernels per panicle in comparison with that in the standard test plot, i.e., the less is the number of kernels per panicle. 7. The earlier the beginning date and the longer the period of irrigation suspension, the lighter are the weights of rough rice and straws per hill in comparison with those in the standard plot.

• Korean Journal of Medicinal Crop Science
• /
• v.28 no.1
• /
• pp.1-8
• /
• 2020

Background: This study was conducted to investigate the effects of NaCl concentration on the photosynthetic parameters, chlorophyll fluorescence and growth characteristics of Crepidiastrum sonchifolium. Methods and Results: As treatments, we subjected C. sonchifolium plants to four different concentrations of NaCl (0, 50, 100 and 200 mM). We found that the photosynthetic parameters maximum photosynthesis rate (P_{N max}), net apparent quantum yield (Φ), maximum carboxylation rate (V_cmax), and maximum electron transport rate (J_max) were significantly reduced at an NaCl concentration greater than 100 mM. In contrast, there was an increase in water-use efficiency with increasing NaCl concentration, although in terms of growth performances, leaf dry weight, root dry weight, stem length, and total dry weight all decreased with increasing NaCl concentration. Furthermore, leakage of electrolytes, as a consequence of cell membrane damage, clearly increased in response to an increase in NaCl concentration. Analysis of the polyphasic elevation of chlorophyll a fluorescence transients (OKJIP) revealed marked decrease in flux ratios (Φ_PO, Ψ_O and Φ_EO) and the PI_abs, performance index in response to treatment with 200 mM NaCl, thereby reflectings the relatively reduced state of photosystem II. This increase in fluorescence could be due to a reduction in electron transport beyond Q^-_A. We thus found that the photosynthetic parameters, chlorophyll fluorescence and growth characteristics of C. sonchifolium significantly increased in response to treatment with 200 mM NaCl. Conclusions: Collectively, the findings of this study indicate that C. sonchifolium shows relatively low sensitivity to NaCl stress, although photosynthetic activity was markedly reduced in plants exposed to 200 mM NaCl.

• Korean journal of applied entomology
• /
• v.48 no.1
• /
• pp.81-86
• /
• 2009

Economic injury level and control thresholds for the management of beet army worm, Spodoptera exigua (Lepidoptera: Noctuidae) were evaluated on chinese cabbage of two different planting time. Two inoculation times were tested for each planting and the number of inoculated larva was 10, 20, 40, 80, respectively. Damages of leaves by first inoculation were 63.2% after eight days planting on 80 larva inoculation plot. By the second inoculation, those were below 50% after 20 days planting on the end of September. The linear relationships between population density and yield reduction were as following; Y = -10.62x + 867.9 ($R^2\;=\;0.643$) for 5 days and Y=-6.432x + 1074 ($R^2\;=\;0.720$) for 20 days. Based on these results the economic injury level was 5.4 larva for five days and 9.0 larva for 20 days per 20 chinese cabbage. The control thresholds calculated by 80% level of economic injury level were 4.3 and 7.2 larva, respectively.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.31 no.1
• /
• pp.84-90
• /
• 1986

An experiment was conducted to know the effects of planting dates (March 5, 15, and 25 and April 4) and transparent polyethylene (P.E.) film treatments(tunnel, tunnel slit, and mulch) on air and soil temperatures and growth and yield of a sweet corn variety, Great Bell. Maximum air and soil temperatures and minimum air and soil temperatures were greater at tunnel>tunnel slit>mulch in that order. Differences in maximum air and soil temperatures among the P.E. film treatments were much greater than those in minimum air and soil temperatures. However, when film was opened due to high air temperature over 40$^{\circ}C$ in the tunnel, air temperature was similar but soil temperature was lower com-pared to mulch. High temperature stress could be avoided in tunnel slit without opening film by increase in the number of slits. Cold damage of corn seedlings was avoided by tunnel and reduced by tunnel slit, and frost-damaged seedlings under the mulch were recovered in few days. The number of days from planting to silking was reduced as planting date delayed. At early plantings, tunnel enhanced early growth and silking, but it delayed at late plantings because tunnel was opened during the most of day time due to high temperature. Black streaked dwarf virus(BSDV) disease was more severe at early plantings and it was reduced in tunnel slit at late plantings because plants were grown under the film at the time of infection. The number of marketable ears was similar among all treatments except mulch at March 5 planting where BSDV was severely infected. Gross income was high in tunnel and tunnel slit at March 25 planting which had more larger marketbale ears and tunnel and tunnel slit at March 5 planting which had higher market price.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.308-308
• /
• 2017

The low and unstable yield of soybean has been a major problem in Japan. Excess soil moisture conditions are one of the major factors to restrict soybean productivity. More than 80 % of soybean crops are cultivated in converted paddy fields which often have poor drainage. In central and eastern regions of Japan, the early vegetative growth of soybean tends to be restricted by the flooding damage because the early growth period is overlapped with the rainy season. Field observation shows that induced excess water stress in early vegetative stage reduces dry matter production by decreasing intercepted radiation by leaf and radiation use efficiency (RUE) (Bajgain et al., 2015). Therefore, it is necessary to evaluate the responses of soybean growth for excess water conditions to assess these effects on soybean productions. In this study, we aim to modify the soybean crop model (Sinclair et al., 2003) by adding the components of the restriction of leaf area development and RUE for adaptable to excess water conditions. This model was consist of five components, phenological model, leaf area development model, dry matter production model, plant nitrogen model and soil water balance model. The model structures and parameters were estimated from the data obtained from the field experiment in Tsukuba. The excess water effects on the leaf area development were modeled with consideration of decrease of blanch emergence and individual leaf expansion as a function of temperature and ground water level from pot experiments. The nitrogen fixation and nitrogen absorption from soil were assumed to be inhibited by excess water stress and the RUE was assumed to be decreasing according to the decline of leaf nitrogen concentration. The results of the modified model were better agreement with the field observations of the induced excess water stress in paddy field. By coupling the crop model and the ground water level model, it may be possible to assess the impact of excess water conditions for soybean production quantitatively.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.2 no.2
• /
• pp.50-61
• /
• 2000

The ground around the portal of a tunnel is the most typical part showing the 3-dimensional mechanical behavior in the tunnel. The portal slope is constructed at the weathered soft rock-mass, and remains as a potential sliding mass. The slope failure around the tunnel portal may happen drastically and induce the great disaster; hence, for the permanent stability several special techniques are required. To solve this problem, the ground around the tunnel portal may be excavated in the arch shape to develop the arching effect in horizontal direction. With the arch-type portal slope, one can reduce considerably the excavation mass and the damage of environments. This approach has not been attempted yet due to the lack of understanding and the well-defined analyzing method, so the retaining wall type portal is more universal. The 3-dimensional finite element analyses were carried out to prove that the arch type is more advantageous in safety and cost than the right angle type. The influence of the tunnel construction sequence and the strength of the rock-mass on the slope stability was investigated by focusing on the maximum shear strain in the slope, and the yield zone at the tunnel face.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 1999.10a
• /
• pp.15-15
• /
• 1999

In chip plating, several parameters must be taken into consideration. Current density, solution concentration, pH, solution temperature, components volume, chip and media ratio, barrel geometrical shape were most likely found to have an effect to the process yields. The 3 types of barrels utilized in chip plating industry are the conventional rotating barrel. vibrational barrel (vibarrel), and the centrifugal type. Conventional rotating barrel is a close type and is commonly used. The components inside the barrel are circulated by the barrel's rotation at a horizontal axis. Process yield has known to have higher thickness deviation. The vibrational barrel is an open type which offers a wide exposure to electrolyte resulting to a stable thickness deviation. It rotates in a vertical axis coupled with multi-vibration action to facilitate mixed up and easy transportation of components, The centrifugal barrel has its plated work centrifugally compacted against the cathode ring for superior electrical contact with simultaneous rotary motion. This experiment has determined the effect of barrel vibration intensity to the plating thickness distribution. The procedures carried out in the experiment involved the overall plating process., cleaning, rinse, Nickel plating, Tin-Lead plating. Plating time was adjusted to meet the required specification. All other parameters were maintained constant. Two trials were performed to confirm the consistency of the result. The thickness data of the experiment conducted showed that the average mean value obtained from higher vibrational intensity is nearer to the standard mean. The distribution curve shown has a narrower specification limits and it has a reduced variation around the target value, Generally, intensity control in vi-barrel facilitates mixed up and easy transportation of components, However, it is desirable to maintain an optimum vibration intensity to prevent solution intrusion into the chips' internal electrode. A cathodic reaction can occur in the interface of the external and internal electrode. $2HD{\;}+{\;}e{\;}{\rightarrow}20H{\;}+{\;}H_2$ Hydrogen can penetrate into the body and create pressure which can cause cracks. At high intensity, the chip's motion becomes stronger, its contact between each other is delayed and so plating action is being controlled. However, the strong impact created by its collision can damage the external electrode's structure thereby resulting to bad plating condition. 1 lot of chip was divided into two equal partion. Each portion was loaded to the same barrel one after the other. Nickel plating and tin-lead plating was performed in the same station. Portion A maintained the normal barrel vibration intensity and portion B vibration intensity was increased two steps higher. All other parameters, current, solution condition were maintained constant. Generally, plating method find procedures were carried out in a best way to maintained the best plating condition. After plating, samples were taken out from each portion. molded and polished. Plating thickness was investigated for both. To check consistency of results. 2nd trial was done now using different lot of another characteristics.

• Korean Journal of Weed Science
• /
• v.1 no.1
• /
• pp.5-14
• /
• 1981

Weed is one of the problems in the crop land as well as in uncultivated land, raising the farm management costs. Therefore, the weed control is essential for effective agricultural management. The cost for weed control in Korea occupies on the average 27.6% of the total labor cost required. Agricultural policies since 1960 were transferring from yield increase due to land productivities to increase of income due to labor productivities. Therefore, the weed control by hand is also changed to weed control by chemicals. The weed control by chemicals has also brought about some side-effects and needs better, improved weed control methods. The present weed control situation and related problems were studied to present new approaches for agricultural development in the future. There were 458 species of weeds in 82 families which were growing in the crop land. The weeds to control, however, are 12 in paddy field and 9 in upland. So far weeds in paddy field are well under control, while weeds in upland are poorly controlled due to change in chemical efficiency and chemical damage in the upland. The administration, research and extension work for the efficient use of agricultural chemicals have been done by various institutions, such as Office of Rural Development, Office of Forestry, and chemical companies. The courses for agricultural chemicals were offered in the agricultural colleges. However, the efficiency of chemicals could not be maximized due to the poor relationships among related institutes. The newly established Agricultural Chemical Research Center at the Office of Rural Development and the Korean Weed Science Association are expected to contribute toward improving weed control in Korea. The Korean agriculture in the future will eventually be mechanized and the varieties resistant to high nitrogen application and to high plant density will be required for high yields. The rice will be transplanted earlier and the whole growing period will be extended. The application of organic matter will be increased for increasing soil fertility, and the use of agricultural chemicals will be continued. Under such a condition, the studies on the weed occurrence and its integrated control measures will be needed. Also weed controls in the newly exclaimed land, crop varieties, horticultural varieties, forage crops, and forests are also needed to study. Basic and practical researches for the weed control to improve the labor productivity will be also needed. In order to meet the all requirements for efficient weed control, weed control systems including all the academics, research and extension workers, administratives, farmers and companies should be established. Also securing researchers and education of personnels are pre-required and research funds for the chemical studies should be provided efficiently and timely.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.32 no.2
• /
• pp.125-130
• /
• 2012

This study was performed to investigate the nutritive values of white panicled rice (Oryza sativa L., WPR) silage manufactured with WPR grown in reclaimed paddy field of Bigumdo of Korea in 2011. The WPR used in this study were collected in 1,000 ha of reclaimed paddy field of Bigumdo and was harvested at dough stage and ensiled. The yield of whole crop rice (WCR) grown in region received the most severe damage (MSD) was lower as about 800 kg/ha as than that in region of normal growth (NG). The content of crude protein and total digestible nutrient in WCR of MSD slightly increased, as compared to that in WCR of NG, but the contents of acid detergent fiber and neutral detergent fiber significantly decreased (p<0.05). The pH in WCR silage of MSD and NG ranged from 4.5 to 5.0 and pH decreased by the inoculation of lactic bacteria (p<0.05). The content of lactic acid in WCR silage of MSD and NG increased by the inoculation of lactic bacteria (p<0.05), but the content of acetic acid and butyric acid decreased (p<0.05). Flieg's score in WCR silage of MSD and NG inoculated lactic bacteria increased from 2 to 3 grade, as comparing to non-inoculation of lactic bacteria. Therefore, this study suggests that WPR can be utilized as forage.

• International Journal of Highway Engineering
• /
• v.8 no.3 s.29
• /
• pp.49-61
• /
• 2006

This study suggests long-life asphalt pavement method which can save maintenance cost by increasing the design and performance period of pavements. The high modulus asphalt binder developed and then various physical tests are performed. Laboratory performance tests and accelerated pavement test are conducted for the high modulus and conventional mixtures. The test results show that dynamic modulus values of high modulus mixtures are higher than those of the conventional mixtures, The high modulus mixtures yield better fatigue, rutting and moisture damage performance than conventional mixtures. Structural analysis is performed and a database is built up for long life asphalt pavement design. Pavement response model is developed through a multiple regression analysis program, SPSS using the database. A design software for the long life pavements is developed based on the pavement response model and laboratory and field performance tests results. In addition, optimum pavement sections and materials are suggested. The suggested AC thickness of long life asphalt pavement is 29cm. A Life cycle cost analysis(LCCA) is conducted to check the economical efficiency of the long life pavement section. The LCCA result shows that initial construction costs of long life and conventional pavements are almost equal, but long life pavement is more profitable in terms of the LCCA.