• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.626-629
• /
• 2003

In order to achieve high-resolution and large-size displays, inspection technology is necessary and important. It is a powerful utility for process and yield improvement for the high valued panel realization. We indicated the challenge of advanced panel manufacturing on inspection ability and throughput. We also investigated the method to judge laser-crystallizing energy by inspection technology. Finally, the total defect number and critical killer defects were classified and discussed in this work.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.323-327
• /
• 2001

Electrorheological(ER) and magnetorheological(MR) fluids have a unique ability to increase the dynamic yield stress of the fluid substantially when electric or magnetic field is applied. Controllable fluids such as ER and MR fluids have received considerable attention as several components of engineering devices. One of them is a smart impact damper using ER/MR fluids. Impact damper system can be used in the joint mechanism of railroad vehicle, protection equipment of elevator's drop, and launch equipment of aircraft. This paper presents the results of an analytical study of the performance of a smart impact damper to suppress vibration during impact excitation. The damping capabilities of MR impact damper for variable applied current are analyzed using Bingham model under sudden impact load.

• Journal of Marine Bioscience and Biotechnology
• /
• v.2 no.1
• /
• pp.11-22
• /
• 2007

This aims to review natural products transformed by mimic intestinal metabolisms with microorganisms and hydrolytic enzymes, which exhibit enforced biological activity, higher extraction yield and identification of active components. In the process, transformation to the smaller active compounds with enzymes and microbes mimics the pharmacological action of natural products by intestinal bacteria. In order to establish conditions for the fermentation and enzyme reaction, it is required to choose several natural products for biotransformation and investigate the optimal conditions for the fermentation or the enzyme reaction such as composition, temperature, pH, inoculum, and cultivation time. It is expected an increase of the internal absorption of the active materials without regard to the intestinal microbes or its ability through biosynthesis of the active materials by the microbes and enzymes. And this techniques can be applied to biotransformation of natural products such as sesaminol, resveratrol, 1-deoxy nojirimycin, naringenin, quercetin, and baicalin and to the metabolism study using the animal model.

• Proceedings of the KIEE Conference
• /
• 2006.04a
• /
• pp.93-95
• /
• 2006

In many control system applications, the system designed must not only satisfy the damping and accuracy specifications, but the control must also yield performance that is robust to external disturbance and parameter variations. We have shown that feedback in conventional control systems has the inherent ability of reducing the effects of external disturbance and parameter variations. Unfortunately, robustness with the conventional feedback configuration is achieved only with a high loop gain, which is normally detrimental to stability. The design of intelligent, autonomous machines to perform tasks that are dull, repetitive, hazardous, or that require skill, strength, or dexterity beyond the capability of humans is the ultimate goal of robotics research. This paper prove the robust control using Analog Adaptive Resonance Theorv(ART2) Algorithm about case study.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.6
• /
• pp.71-75
• /
• 2006

The application of focused ion beam (FIB) technology in micro/nano machining has become increasingly popular. Its usage in micro/nano machining has advantages over contemporary photolithography or other micro/nano machining technologies such as small feature resolution, the ability to process without masks and being accommodating for a variety of materials and geometries. The target of this paper is the analysis of FIB sputtering process according to tilt angle, dwell time and overlap for application of 3D micro and pattern fabrication and to find the effective beam scanning conditions using Taguchi method. Therefore we make the conclusions that tilt angle is dominant parameter for sputtering yield. Burr size is reduced as tilt angle is higher.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.8
• /
• pp.1062-1066
• /
• 2001

Studies were carried out on forty young bulls of the Hariana breed (around 18 months of age) selected on the basis of their dam's milk yield at the animal farm of CCS HAU, Hisar during the period 1993-1999. Since animals showed variation in capacity to work over prolonged periods, they were subjected to regimes of carting without load and with 8 qtls. of load for three hours. The study revealed that maximum change took place in the pulse rate, followed by respiration rate and rectal temperature. The mean fatigue score for pulling an empty cart ranged between 1.66 to 2.20 after two hours work, and 2.36 to 2.73 after three hours work. For a cart loaded with 8 qtls., the corresponding ranges were 2.90 to 3.36 and 3.40 to 4.10, respectively. These results indicated that the animals under experiment had the capacity to pull moderate load (8 qtls.) for about two hours without showing any serious effect on the ability to recover and soon to work again.

• International Commerce and Information Review
• /
• v.7 no.1
• /
• pp.75-94
• /
• 2005

With most major full service banks having launched transactional Internet banking, attention is shifting to the realities of managing the Internet channel as a profitable component of an overall delivery strategy. In addition to examining Case Study and Internet Bank Model. Services of Internet Banking available through the Internet are as follows. 1. credit card loans, personal loans. 2. high-yield financial products. 3. insurance products. 4. securities products. 5. Case study of Foreign Internet Banking(ING, BNP, HSNC, City Bank). The study reviewed fields, including financial services, customer service, Website formation and design, convenience of use and system safety, Internet Banking Model, and many related areas. Internet Banking earned high marks in most fields. This study review focuses on the following: Understanding and meeting consumer expectations for us ability, site performance and functionality. Integrating the Internet channel into overall marketing, product delivery and customer service strategies. Strategies to increase customer satisfaction with Internet Banking and to attract new Internet bankers. therefore this study review activity model concretion of Internet Banking Model and Case Study.

• Journal of Microbiology and Biotechnology
• /
• v.3 no.4
• /
• pp.244-251
• /
• 1993

A novel system has been developed to produce ${\delta}-aminolevulinic$ acid (ALA) using the intact cells of late logarithmic phase of Rhodocyclus gelatinosus KUP-74. The system was shown optimum yield of extracellular ALA under a condition of anaerobic light irradiation (4 Klux) at $30^{\circ}C$ with no variation in cell mass. The rate of extracellular ALA formation was stimulated by low doses of either $C_4\;or\;C_5$ ALA biosynthetic precursors, where 5 mM ($C_4) and 3 mM ($C_5) of each precursors were appeared to generate the maximum rates of 3.3 and 4.0 nmoles of ALA per 0.35 mg cells per hr, respectively. Half-life of the system was 10 hr in a sense of an ability of portage transport of L-glutamate, and sequential dose of this compound was resulted in promising recovery of the ALA.

• Journal of Powder Materials
• /
• v.27 no.5
• /
• pp.420-428
• /
• 2020

Additive manufacturing technology is recognized as an optimal technology for mass-customized distributed production because it can yield products with high design freedom by applying an automated production system. However, the introduction of novel technologies to the additive manufacturing industry is generally delayed, and technology uncertainty has been pointed out as one of the main causes. This paper presents the results of the research and analysis of current standardization trends that are related to additive manufacturing by examining the hierarchical structure of the quality system along with the various industry and evaluation standards. Consequently, it was confirmed that the currently unfolding standardization does not sufficiently reflect the characteristics of additive manufacturing technology, and rather can become a barrier to entry for market participants or an element that suppresses the lateral shearing ability of additive manufacturing technology.

• Journal of Ginseng Research
• /
• v.23 no.3 s.55
• /
• pp.135-147
• /
• 1999

Nine herbicide products (fluazifop-p-butyl, clethodim, MCPA-sodium, 2,4-0 amine, chlorthal dimethyl, diquat, glyphosate, ethalfluralin and oryzalin) were evaluated for use on ginseng (Panax quinquefolius). Products varied in their ability to suppress weeds and certain materials were phytotoxic to ginseng in some trials. Chlorthal dimethyl (broadleaf weeds), MCPA-sodium (broadleaf weeds), fluazifop-p-butyl (grass weeds), and clethodim (grass weeds) were found to be effective as weed control agents and did not adversely affect ginseng growth. Other products tested were either not efficacious or were phytotoxic to ginseng in some trials. Weed populations were mainly introduced into the planting sites via the straw mulches used in ginseng cultivation.