• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.55 no.6
• /
• pp.802-807
• /
• 2022

We investigated the physical properties and color values of surimi mixtures with added natural red pigments from laver Pyropia yezoensis. After adding the natural red pigment from seaweed extract to surimi, the hardness, gumminess, and chewiness of the surimi decreased compared to the negative controls. The L^* color value was lower for the surimi mixture than the negative controls, but the a^* and b^* color values were higher. After cold storage for 7 days, the unheated surimi mixture showed increased firmness, but decreased adhesiveness. Moreover, the gumminess and chewiness of the surimi mixture stored after heating were increased compared to the pre-storage values. These results indicate that seaweed extract pigments may be used as additives for surimi, to increase the color preference, with little effect on the physical properties.

• Journal of the Korea Society for Simulation
• /
• v.19 no.1
• /
• pp.161-171
• /
• 2010

Sensor Networks are often deployed in unattended environments, thus leaving these networks vulnerable to false data injection attacks in which an adversary injects forged reports into the network through compromised nodes. Such attacks by compromised sensors can cause not only false alarms but also the depletion of the finite amount of energy in a battery powered network. Ye et al. proposed the Statistical En-route Filtering scheme to overcome this threat. In statistical en-route filtering scheme, all the intermediate nodes perform verification as event reports created by center of stimulus node are forwarded to the base station. This paper applies a probabilistic verification method to the Static Statistical En-route Filtering for energy efficiency. It is expected that the farther from the base station an event source is, the higher energy efficiency is achieved.

• Proceedings of the Korean Information Science Society Conference
• /
• 2012.06a
• /
• pp.152-154
• /
• 2012

스마트폰은 배터리를 사용하는 기기이기 때문에 전력 최적화가 매우 중요한 사안이다. 특별히, 많은 에너지가 소모되는 3G 네트워크 인터페이스에서, 불필요하게 대기하며 발생하는 Tail 에너지를 줄이기 위한 연구가 활발히 진행되어 왔다. 기존의 연구들은 사용자와 응용의 특성을 고려하지 않고 전송 예측 방법에 대해서도 논하고 있지 않아 실제 시스템에 적용하는데 한계가 존재한다. 본 논문에서는, 국내 망환경에서 적용 가능한 3G 모델을 통해 사용자의 응용 별 사용 경향성을 파악하고, 응용 별로 서로 다른 Tail 지속 시간을 선택하여 에너지를 최적화 할 수 있는 방법을 제시한다. 본 기법을 적용하였을 때, 10%의 지연 증가를 준수하며, 평균 34%의 네트워크 에너지를 줄일 수 있었다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.3
• /
• pp.25-33
• /
• 2008

In this paper, the transmit power minimization for Poisson distributed wireless ad-hoc relay networks in Rayleigh fading channels is considered. We investigate two power allocation methods one is a minimum power allocation (MPA) strategy and the other is an equal outage power allocation (EOPA) strategy. We analyze the total transmit power of two allocation methods under the given end-to-end outage probability constraint. Our results show that the MPA achieves more power saving than EOPA, and the power saving is more significant as the number of relay nodes increases.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.213-213
• /
• 2012

We first confirm the tautomerization of 2-thiazoline-2-thiol on Ge (100) surface using CLPES and DFT calculation. We clearly confirmed that there exist two different molecular structures (we well show in our poster) in C 1s, N 1s, and S 2p CLPES spectra. Moreover, we obtained two plausible adsorption structures using DFT calculation which are that one is s-dative bonded structure and the other is SH dissociated-N-dative bonded structure although their stabilities are different on Ge (100) surface. We will investigate this interesting result for the confirmation of tautomerization of 2-thiazoline-2-thiol molecule adsorbed on Ge (100) surface.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.53-56
• /
• 2005

In this paper, we have developed the CID(caller identification) system the external type based on the Web. The one can display the personal position and information received from a dispatcher by an internet.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.303.1-303.1
• /
• 2016

Polymer-like amorphous carbon films were deposited on polyethylene naphthalate (PEN) substrate by plasma-enhanced chemical vapor deposition (PECVD) and their water vapor transmission rates (WVTR) were tested. propane was used as precursors. To make a polymer-like amorphous carbon film the deposition rate, surface roughness, light transmittance, and WVTR of the films were characterized as a function of the precursor feed ratio and plasma power. The water vapor transmission rates of bare PEN film and single layer PAC on PEN substrate were 6.95 g/m2/day and 0.3 g/m2/day, respectively. The superior property the water vapor permeability of thin layers of PAC was attributed to uniform coverage and good adhesion between PAC film and PEN substrate.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.3
• /
• pp.320-329
• /
• 1999

An experimental study has been performed to investigate the heat transfer characteristics of impinging jets with corrugated nozzle and wake generation plate. Three different shapes of corrugated nozzle and five different shapes of wake generation plate were tested to improve the heat transfer characteristics of impinging jet. Heat transfer coefficients were obtained by using transient method based on the liquid crystal thermography. The effects of corrugated nozzle and wake generation plate on the heat transfer characteristics of impinging jets were discussed in detail. The results showed that both the corrugated nozzle and the wake generation plate improved the heat transfer characteristics of impinging jet. Especially, heat transfer coefficients around stagnation region of impinging jets were highly increased.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.359-360
• /
• 2009

홈 네트워크 구축의 핵심 부품인 전력선 통신용 블로킹 필터를 제조하였으며, 신호 감쇄 특성을 측정하고 적용가능성을 평가 하였다. 전자장 모의 해석을 통하여 자심재료에 대한 포화자속밀도 특성을 분석 하였으며, 최소의 크기를 갖는 I 형상의 자심재료에 $3.2\Phi$의 나동선을 10.5턴 권선하여 대용량 인덕터를 제조하고, $4.3\;{\mu}H$의 인덕턴스를 구현하였다. 설계된 대용량 인덕터를 적용하여 30A급의 블로킹 필터를 제조하였고, 1.7 MHz ~ 30 MHz 대역에서의 -60 dB의 신호감쇄 특성을 얻었다.

• 한국약용작물학회:학술대회논문집
• /
• 2011.04a
• /
• pp.392-393
• /
• 2011