• 선박안전
• /
• 통권31호
• /
• pp.60-70
• /
• 2011

The slamming impact pressures at the bottom area of the Open60' are evaluated by the rules and regulations of various organizations - ISO and classification societies. The enhanced performance of the modern racing yacht in terms of speed which achieves well over 20 knots needs special consideration. The calculated design impact pressures are compared a experimental results. Severe difference can be found in these calculation results but the final conclusion shall be obtained after the scantling calculation under the evaluated design impact pressure so far.

• 한국산학기술학회논문지
• /
• 제18권5호
• /
• pp.531-542
• /
• 2017

강선이나 강화플라스틱선 등의 선박 재료는 선박안전법에 규정된 규격재료를 사용하는 경우로서 판두께 측정시험이나 종굽힘강도시험을 통하여 제작 선체의 구조 안전성을 쉽게 확인할 수 있다. 한편, 염가의 폴리에틸렌 등과 같은 비규격재료를 선체 전장이 짧은 플레저 보트의 선체로 사용하는 경우 역학적 특성을 파악하기 쉬워 선체 설계를 수행하기에 매우 유리하고, 대량 생산 시스템을 갖추는 경우 제작 비용이 낮아 해당 제품의 가격 경쟁력을 가질 수 있다. 그러나 폴리에틸렌 선체의 경우 비규격재료를 사용함에 따라 기존의 소형선체에 대한 종굽힘강도시험을 이용하여 선체의 구조 안전성을 평가할 수 없다. 이러한 문제점을 해결하기 위하여 본 연구에서는 플레저 보트의 낙하시험 표준절차인 플레저 보트 검사 기준과 ISO 12215-5를 기초로 폴리에틸렌 선체에 대한 낙하시험을 수행한 후 이것을 기초로 정적구조해석을 수행하여 비규격재료로 개발된 선체의 구조 안전성을 확인함으로서 플레저 보트 검사 기준과 ISO 12215-5의 낙하시험방법이 선체 구조설계에 이용될 수 있음을 보였다.

• 한국산학기술학회논문지
• /
• 제22권2호
• /
• pp.733-738
• /
• 2021

최근 국내 해양레저에 대한 국민들의 관심이 높아지고 있고, 해외 시장 개척을 위한 레저선박 건조 및 제조업체들의 연구개발이 활발한 실정이다. 기존 레저보트에 많이 사용되어 온 재료 중에서 FRP와 알루미늄합금은 각각 장기간 사용으로 인한 흡습성과 재활용이 불가능한 환경문제와, 높은 열전도도와 고열에 약해 화재에 취약하다는 단점을 가지고 있다. 따라서 본 연구에서는 높은 비강도와 내식성을 갖춘 티타늄합금을 선체 재료로 선택하였고, 선박의 구조설계를 위해 충격하중에 의한 설계하중을 4가지 규정으로부터 산정하고, 이 하중에 대응하는 선체 판두께를 추정하였다. 국제표준인 ISO 12215-5, 이탈리아선급인 RINA Pleasure Yacht, 영국선급인 LR Special Service Craft, 한국선급인 KR 고속경구조선규칙을 비교 분석한 결과, 최대 슬래밍하중은 ISO, KR, LR, RINA의 크기 순서로 높게 계산되었고, 요구되는 판 두께도 ISO, KR, LR, RINA의 크기 순서로 추정되었다. 레저보트는 국제 규정에 적합한 설계와 인증이 필수적이므로, 각 규정에 대한 사용자의 이해를 높이고 해외 수출 선박의 설계 및 승인 절차에 도움이 되리라 생각한다.

• 한국실내디자인학회논문집
• /
• 제15권1호
• /
• pp.158-165
• /
• 2006

The space of leisure boats & yachts is formed by interior design elements and shapes are formed by combination of those elements. By means of configuration of the design elements, space is made in a ship and patterns in an inside space are made through production. These space can be categorized as (1) cabin(common cabin, staterooms, one-cabin), (2) salon, (3) galleys & dinette, (4) heads(showers, toilets, bidets, sinks), (5) cockpit, (6) wheelhouses, navigation stations, (7) fore peaks, (8) engine room, (9) deck etc. Interior materials are classified into (1) walls(bulkheads & lining wall), (2) floors(sole), (3) ceilings(overheads), (4) doors & windows, (5) furniture, (6) lightings and (7) Hardware & decoration in large, medium and small sizes, which constitute interior design elements of a leisure boat & yacht. The materials used in leisure boats & yachts have properties of lightweight, noise and vibration resistance, fire & flame retardant, stability, strengths, lifespan, appearance and special operation in construction.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2017년도 추계학술발표회
• /
• pp.207-207
• /
• 2017

• 한국기계가공학회지
• /
• 제10권2호
• /
• pp.52-60
• /
• 2011

Korea is the best country for ship-building. But nowadays, the speedboat and yacht are not mostly developed yet. For the sleek lines of ship, more innovative transmission system should be obtained in the ship industry. In general, marine transmissions often use the straight shafts and the helical gears. So it makes problem that engine-room requires large space. In this case, conical gear is the best solution for this. Until now, technology of conical gear is not generalized, but it will be increased more through many applications. So, in order to get conical gear design technology by ourselves, this thesis is conducted. This paper was written to gain useful information of marine gearbox design applied conical gear through the measurement of backlash, computer analysis and tooth contact test of helical conical involute gear pairs.

• 한국자동차공학회논문집
• /
• 제18권5호
• /
• pp.9-19
• /
• 2010

Every car manufacturer desires to reduce the new car development time spent in improving the safety, NVH, lightweight, reliability and environment friendly features of the car. Other considerations such as planning, exterior and interior styling, packaging, color, and material selection increase the complexity of the car design process. This paper proposes a personal DDP (Digital Design Process) to utilize the engineering analysis and design/styling software for car design. DDP can be efficiently used by a team of car research center or a studio with small number of engineers, helping ordinary engineers becoming ambidextrous in design as well as engineering applications. The concept model starts from idea sketch, rendering, and 3D surface model with CAS (Computer Aided Styling) to the final safety estimation by using proposed DDP based on engineering technology (CAD, CAE). The concept model proposed a hydrogen fuel cell sports coupe which could be available within next 10 years. The proposed DDP can not only reduce the new car development time but also be adapted into designing of varied products such as aircraft, yacht, electrical equipment and sports gear.

• 수산해양기술연구
• /
• 제44권4호
• /
• pp.353-361
• /
• 2008

Recently a modern style sailing boat suitable for Korean sea was designed through full three dimensional design skill by the authors. In this paper, based on this three dimensional hull and deck design, a production process of 31ft class cruiser sailing boat was developed. First of all, it was possible to make the digital mock-up for design boat. Through this mock-up and RP(rapid prototyping) modeling, an appropriate general arrangement of design boat was able to be determined at final. And also the female deck mould was able to be made by a 5-axis NC cutting machine. By doing this method, more higher efficiency and precision for sailing boat production could be achieved than before. Through this research the total process of design and construction for the designed boat was established.

• 한국해양공학회지
• /
• 제29권1호
• /
• pp.62-69
• /
• 2015

Coastlines are protected by breakwater structures against the erosion of sand or other materials along beaches due to wave action. This research examined the use of physical modeling to determine the effects of the tetrapod size and vertical walls of a rubble mound on the volume of wave overtopping under irregular wave conditions in coastal areas in Busan Yacht Harbor. In this analysis model, the structures were studied using irregular waves and the JONSWAP wave energy spectrum. To understand the effects of the tetrapod size and heights of the vertical wall, the study considered vertical walls of 0, 1.78, 6.83, and 9.33 cm with armor double layered material tetrapods of 8, 12, 16, and 20 tons. An extensive number of experiments covering a relatively large range of variables enabled a comprehensive discussion. First, in the presence of a short vertical wall, the water level played a key role in the overtopping discharge. In such circumstances, the values of the wave overtopping discharge decreased with increasing freeboard size. In the presence of a tall freeboard and middle, the value of the wave overtopping discharge was equally influenced by the vertical wall factor. Moreover, the tetrapod size decreased by an increase in the vertical wall factor, and relationship between them resulted in a short wall height. From an engineering point of view, considering a small water level may allow the choice of a shorter vertical wall, which would ultimately provide a more economical design.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2010년도 춘계학술대회
• /
• pp.385-386
• /
• 2010

선박의 상하동요 및 종동요 간의 내항성능은 승객에게 피로감을 주며, 적재된 화물과 선체에 탑재된 재설비에 구조적 하중을 가져오게 된다. 이러한 점을 개선하기 위해 소형 카타마란 파워요트 설계시 해당 실적선 조사와 선저형상을 결정하여 선형을 설계하였다. 본 연구에서는 국내 연안의 해양환경에 대한 기초자료를 토대로 운동성능 해석조건을 선정하였다. 이를 통해 카타마란형 레저선박의 운동성능을 선속에 따라 고찰하였다. 파도와 선박의 만남각에 따른 내항성능을 추정하여, 파랑의 만남주파수에 대한 응답진폭비와 운동성능이 우수한 영역에 대해서 평가하였다.