• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2000년도 High Temperature Superconductivity Vol.X
• /
• pp.252-256
• /
• 2000

We investigated resistance development in Au/YBCO thin film meander lines during quench. The meander lines were fabricated by coating YBCO films insitu with a gold layer and patterning them by photolithography. The center stripe quenched fastest even though the flux flow resistance that appeared upon the current passing the critical current was uniform. Quench started at an area of the center stripe and propagate both through the gold layer and the sapphire substrate. Quench propagation speed was uniform and 60 cm/s at 30 V$_{rms}$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 기술교육전문연구회
• /
• pp.16-19
• /
• 2003

YBCO film을 이용하여 2 stripe-meander 형태의 초전도 한류기를 제작하고 시험하였다. 초전도 film의 hot spot에 의해 발생하는 열을 분산시키기 위해 gold shunt layer를 입혔다. 사고각 $0^{\circ}$에서 사고발생 후 최초 quench 전류값은 $9.56A_{peak}$이었고 약 0.63 msec동안 fast quench 가 진행되고 이후에는 gold층의 열발생에 의한 저항증가가 약 3주기동안 진행된 후 안정되었다. 사고각 $45^{\circ}$와 $90^{\circ}$ 에서는 전류가 상승하는 도중 혹은 최고지점에서 사고가 발생했기 때문에 fast quench time이 각각 0.56 msec와 0.26msec를 보였다. 초전도 한류기를 적용하였을 때 사고전류는 사고직후 약 5배, 3주기후에는 약 8.5배까지 효과적으로 제한함을 알 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.832-833
• /
• 2008

초전도 한류 소자의 퀜치 특성은 인가 전압의 크기와 시간에 의존한다. 본 연구에서는 사파이어 기판 위에 박막 형태로 증착된 Au/YBCO의 퀜치 거동을 조사하기 위하여 임의 시간의 고장전류를 인가하고 이 때 발생하는 온도를 검출하여 그 특성을 조사하였다. 시험에 사용된 한류소자는 Au/YBCO/사파이어 기판으로 구성되었으며, 길이 19cm, 폭 2 cm의 stripe 형태를 갖는 초전도 박막이었다. 임계전류는 200A이며 6 주기 동안의 전압인가에 대하여 6 V/cm (상승온도 250 K 기준)의 정격전압을 보였다. 이러한 특성을 갖는 한류소자의 한류 시 온도증가를 조사하기 위하여 한류소자의 뒷면에는 은 박막을 적절한 패턴으로 증착하여 온도 센서로 사용하였으며, 이를 통하여 퀜치 거동을 파악하고자 하였다. 실험 결과, 한류 소자 양단에 250 V의 전압을 인가하고 2 ms 동안 사고 전류를 인가하였을 때, 초전도 박막의 온도는 154 K까지 증가하였으며 다시 초전도성을 회복하기까지의 시간은 약 420 ms가 소요됨을 확인할 수 있었다.

• 한국전기전자재료학회논문지
• /
• 제17권6호
• /
• pp.673-677
• /
• 2004

We present the basic properties of a superconductive fuse (SF) based on YBCO/Au films. The SF consists of YBCO stripes covered with Au layers for current shunt. The fault current was limited to a designed value in less than 0.4 msec by resistance development in YBCO/Au upon quenching. This enabled the SF to transfer small fault power and the suppressed current was sustained for more than 0.5 msec while Au layer melting and arcing. The arcing time was less than 2.5 msec, that is short enough to do self-interruption. Under the source voltage of 100 $V_{rms}$, the longer the duration time of fault current was, the shorter its discharge time was. The duration time of fault current and its discharge time were reduced by increased voltages in the range of 200 - 300 $V_{rms}$. We thought that this was because the quench propagation was limited by local melting generated with higher voltage.age.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 춘계학술대회 논문집 유기절연재료 전자세라믹 방전플라즈마 연구회
• /
• pp.161-163
• /
• 2001

We present the basic properties of a superconducting current limiting fuse (SCLF) based on YBCO/Au films. The SCLFs consists of YBCO stripes covered with Au layers for current shunt. Under the source voltage of 100 $V_{rms}$, the longer the duration time of fault current was, the shorter its discharge time was. The duration time of fault current and its discharge time were reduced by increased voltages in the range of 200 - 300 $V_{rms}$. We thought that this was because the quench propagation was limited by local melting generated with higher voltage.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 춘계학술대회 논문집 방전 플라즈마 유기절연재료 초전도 자성체연구회
• /
• pp.169-172
• /
• 2004

We present the basic properties of a superconducting current limiting fuse (SCLF) based on YBCO/Au films. The SCLFs consists of YBCO stripes covered with Au layers for current shunt. Under the source voltage of 100 $V_{rms}$, the longer the duration time of fault current was, the shorter its discharge time was. The duration time of fault current and its discharge time were reduced by increased voltages in the range of 200 - 300 $V_{rms}$. We thought that this was because the quench propagation was limited by local melting generated with higher voltage.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 A
• /
• pp.277-280
• /
• 1999

We fabricated a resistive superconducting fault current limiter of two stripe meander type based on a YBCO film, and performed current limitation experiments. In order to disperse the heat generated at hot spots in the YBCO film the film was coated with a gold shunt layer. At $0^{\circ}$ fault angle the minimum quench current was $9.6 A_{peak}$(meander line cross section: $5{\times}10^{-6}cm^2$) and the fast quench time was 0.63 msec. The resistance of the limiter continued to increase for three cycles due to heat generation in the gold layer and was stabilized afterwards. At $45^{\circ}$ and $90^{\circ}$ the fast quench time were 0.56 msec and 0.26 msec, respectively. The quench time is believed to be reduced because faults occurred when the current was increasing or was at the peak value. With the limiter we could effectively limit the fault current about 1/5 times right after the fault and about 1/8.5 times three cycles after.