• 한국세라믹학회지
• /
• 제37권8호
• /
• pp.745-750
• /
• 2000

YAG:Tb3+ as green phosphor were studied for the development of low voltage FED phosphor prepared by hydrothermal synthesis. We changed the concentration of luminescence center ion Tb3+ in hydrothermal reaction of which conditions were at 8M NH4OH as mineralizer, at 35$0^{\circ}C$ for 12hrs. As results, we could finally get the YAG:Tb3+ (Y3-xTbxAl5O12) powder of which particle size was about 0.2~1.0${\mu}{\textrm}{m}$. The excitation spectra and the green emitted spectra of YAG:Tb3+ phosphor powder were observed. When we doped 0.25 mol Tb to YAG, we could observe the maximum cathodoluminescence from YAG:Tb3+ phosphor and the chromaticity coordinate of the phosphor was shown x=0.35, y=0.56 in CIE1931 diagram.

• 한국분말재료학회지
• /
• 제30권5호
• /
• pp.424-430
• /
• 2023

YAG phosphor powders were fabricated by the atmospheric plasma spraying method with the spray-dried spherical YAG precursor. The YAG precursor slurry for the spray drying process was prepared by the PVA solution chemical processing utilizing a domestic easy-sintered aluminum oxide (Al₂O₃) powder as a seed. The homogenous and viscous slurry resulted in dense granules, not hollow or porous particles. The synthesized phosphor powders demonstrated a stable YAG phase, and excellent fluorescence properties of approximately 115% compared with commercial YAG:Ce³⁺ powder. The microstructure of the phosphor powder had a perfect spherical shape and an average particle size of approx imately 30 ㎛. As a result of the PKG test of the YAG phosphor powder, the synthesized phosphor powders exhibited an outstanding luminous intensity, and a peak wavelength was observed at 531 nm.

• 한국세라믹학회지
• /
• 제51권5호
• /
• pp.424-429
• /
• 2014

YAG:$Ce^{3+}$ phosphor powders were synthesized using $Al(OH)_3$ seeds by means of a PVA-polymer-solution route. Various types of PVA with different molecular weights (different polymerization) were used. All dried precursor gels were calcined at $500^{\circ}C$ and then heated at $1500^{\circ}C$ in a mix of nitrogen and hydrogen gases. The final powders were characterized via XRD, SEM, PSA, PL, and PKG analyses. The phosphor properties and morphologies of the synthesized powders were dependent on the PVA type. As the molecular weight of the PVA was increased, the particle size gradually decreased with agglomeration, and the luminous intensity of the phosphor increased. However, the phosphor powder prepared from the PVA exhibiting very high molecular weight, showed a 531 nm (blue) shift from the 541 nm (yellow) wavelength of the YAG:$Ce^{3+}$ phosphor. Finally, the synthesized YAG:$Ce^{3+}$ phosphor powder prepared from the PVA with 89,000 - 98,000 molecular weight showed phosphor properties similar to those of a commercial phosphor powder, but without a post-treatment process.

• Korean Chemical Engineering Research
• /
• 제43권3호
• /
• pp.407-411
• /
• 2005

분무용액에 다양한 융제들을 도입하여 분무열분해법에 의해 YAG:Tb($Y_3Al_5O_{12}:Tb$) 형광체들을 합성하였다. 융제의 종류, 유기 첨가물 및 후열처리 온도 등이 YAG:Tb 형광체의 형태, 결정성 및 발광 특성에 미치는 영향 등을 조사하였다. 유기첨가물로 사용된 구연산과 에틸렌 글리콜은 고온의 열처리 과정에서 YAG:Tb 형광체의 형태 파괴 없이 발광 특성을 증대시켰다. 반면에 다량의 융제를 포함한 분무용액으로부터 분무열분해 공정에 의해 합성된 전구체 분말은 $1300^{\circ}C$에서의 후열처리 후에 구형의 형태가 사라졌다. 리튬 탄산염을 융제로 함유한 분무용액으로부터 합성된 YAG:Tb 형광체는 후열처리 후에 미세하면서도 균일한 형태를 가졌다. 융제로서 사용된 리튬 탄산염은 YAG:Tb 형광체의 발광 휘도 개선에도 효과적이었다. 리튬 탄산염을 융제로 첨가한 경우에 합성된 YAG:Tb 형광체의 최적의 발광 세기는 융제를 첨가하지 않은 경우에 합성된 형광체의 발광세기의 189％였다.

• 대한금속재료학회지
• /
• 제50권6호
• /
• pp.439-443
• /
• 2012

YAG:Ce phosphor were prepared in a self-propagating high-temperature synthesis (SHS) using a $1.5Y_2O_3+2.5Al_2O_3+0.116CeO_2+3.0KClO_3+kCO(NH_2)_2+m(C_2F_4)_n$ precursor mixture. The heat for the combustion propagation was provided by the reaction of a $KClO_3+CO(NH_2)_2+(C_2F_4)n$ mixture. Pure-phase YAG phosphor was synthesized at the combustion temperature of $1210^{\circ}C$ from k=3.6 mole and m=0.3 mole. The as-prepared YAG:Ce phosphor had a particle size of $2-10{\mu}m$. The addition of Teflon to the precursor mixture increased the YAG particle size and its luminescent intensity. The emission peak of the YAG phosphor was blue-shifted with an increase of Teflon concentration.

• 한국전기전자재료학회논문지
• /
• 제20권6호
• /
• pp.536-540
• /
• 2007

The Ce-doped YAG(Yttrium Aluminum Garnet, $Y_3Al_5O_{12}$) phosphor powders were synthesized by combustion method. The luminescence, formation process and structure of phosphor powders were investigated by means of XRD, SEM and PL. The XRD patterns show that YAG Phase can form through sintering at $1000^{\circ}C$ for 2 h. This temperature is much lower than that required to synthesize YAG phase via the conventional solid state reaction method. There were no intermediate Phases such as YAP(Yttrium Aluminum Perovskite, $YAlO_3$) and YAM(Yttrium Aluminum Monoclinic, $Y_4Al_2sO_9$) observed in the sintering process. The powders absorbed excitation energy in the range $410{\sim}510\;nm$. Also, the crystalline YAG:Ce showed broad emission peaks in the range $480{\sim}600\;nm$ and had maximum intensity at 528 nm.

• 한국분말재료학회지
• /
• 제20권1호
• /
• pp.37-42
• /
• 2013

$YAG:Ce^{3+}$ phosphor powders were synthesized using a $Al_2O_3$ seed (average particle size: 5 ${\mu}m$) by the polymer solution route. PVA solution was added to the sol precursors consisting of the seed powder and metal nitrate salts for homogeneous mixing in atomic scale. All dried precursor gels were calcined at $500^{\circ}C$ and then heated at $1400^{\circ}C{\sim}1500^{\circ}C$ in $N_2/H_2$ atmosphere. The final powders were characterized by using XRD, SEM, PSA, PL and PKG test. All synthesized powders were crystallized to YAG phase without intermediate phases of YAM or YAP. The phosphor properties and morphologies of the synthesized powders were strongly dependent on the PVA content. Finally, the synthesized $YAG:Ce^{3+}$ phosphor powder heated at $1500^{\circ}C$, which is prepared from 12:1 PVA content and has an average particle size of 15 ${\mu}m$, showed similar phosphor properties to a commercial phosphor powder.

• 한국결정성장학회지
• /
• 제30권2호
• /
• pp.73-77
• /
• 2020

본 연구에서는 차세대 자동차 레이저 헤드램프 적용을 위하여 분무건조법을 통하여 가넷 구조를 갖는 구형의 YAG : Ce 형광체를 합성하였으며 이를 기반으로 형광체 세라믹을 제조하고 광학적 특성을 분석하였다. 분무건조법 기반으로 합성된 구형의 YAG : Ce 형광체를 이용한 형광체 세라믹의 두께를 100 ㎛, 150 ㎛, 200 ㎛로 조절하여 두께에 따른 광변환 효율, 열 소광, 휘도 및 색온도의 광학적 특성을 비교하였다. 연구 결과, 양자효율 및 광속 값은 두께가 150 ㎛ 일 때, 가장 높게 나타났다. 본 연구 결과는 기존의 액상법을 기반으로 한 YAG : Ce 나노 형광체 제조의 고 비용, 저 수율 등의 문제점을 개선한 방법으로 향 후, 형광체 세라믹 제조에 큰 역할을 할 수 있을 것이라 기대된다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.322-323
• /
• 2006

The nano-sized Ce-doped YAG(Yttrium Aluminum Garnet, $Y_3Al_5O_{12}$) phosphor powders were prepared by combustion method from a mixed aqueous solution of metal nitrates, using citric acid as a fuel. The luminescence formation process and structure of phosphor powders were investigated by means of XRD, SEM and PL. The XRD patterns show that YAG phase can form at all of the $Ce^{3+}$ concentration. However, when $Ce^{3+}$ concentration is over 2.0mol%, XRD patterns show $CeO_2$ peak between (321) peak and (400) peak. The pure crystalline YAG:Ce with uniform size of 30nm was obtained at 0.6mol% of the $Ce^{3+}$ concentration. The crystalline YAG:Ce powders showed broad emission peaks in the range 475~630nm and had maximum intensity at 526nm.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.489-490
• /
• 2006

The Ce-doped YAG(Yttrium Aluminum Garnet, $Y_3Al_5O_{12}$) phosphor powders were synthesized by Sol-gel method. The luminescence, formation process and structure of phosphor powders were investigated by means of XRD, SEM and PL. The XRD patterns show that YAG phase can form through sintering at $1000^{\circ}C$ for 2h. This temperature is much lower than that required to synthesize YAG phase via the conventional solid state reaction method. There were no intermediate phases such as YAP(Yttrium Aluminum Perovskite, $YAlO_3$) and YAM(Yttrium Aluminum Monoclinic, $Y_4Al_2O_9$) observed in the sintering process. The powders absorbed excitation energy in the range 410~510nm. Also, the crystalline YAG:Ce showed broad emission peaks in the range 480~600nm and had maximum intensity at 528nm.