• Journal of Welding and Joining
• /
• 제22권1호
• /
• pp.58-64
• /
• 2004

The control of the weld bead shape is important in laser welding of the small parts. The effects of laser welding parameters on the weld bead shape in the pulsed Nd:YAG laser welding of STS 304L material were investigated. Shielding gas type, flow rate, pumping voltage, pulse frequency, pulse width, focal position and overlap distance were selected as laser welding parameters. Experiments were designed and conducted using the Taguchi method which was a statistical experimental method. The weld bead width, penetration, area and aspect ratio were measured and analysed as the weld bead shape properties and the welding parameters were optimized to maximize the weld aspect ratio. Weld aspect ratio were greatly affected by the pulse width, pumping voltage and pulse frequency, and somewhat by the overlap distance, and little by the shielding gas type, flow rate and focal position. A confirmation experiment were conducted using the optimized welding parameters.

• Current Optics and Photonics
• /
• 제3권3호
• /
• pp.243-247
• /
• 2019

We have developed a compact, wavelength-selectable, Q-switched Nd:YAG laser at mid ultraviolet for chemical warfare agent detection. The fundamental wave at 1064 nm is delivered by a pulsed solid state laser incorporating with a square-type Nd:YAG rod in a resonator closed by two crossed Porro prisms for environmental reliability. The output energy at 213 nm ($5{\omega}$) and 266 nm ($4{\omega}$) by ${\chi}^{(2)}$ process in the sequentially disposed BBO crystals are measured to be 6.8 mJ and 15.1 mJ, respectively. The output wavelength is selected for $5{\omega}$ and $4{\omega}$ by a motorized wavelength switch. The energy ratio of the $5{\omega}$ to the $4{\omega}$ is varied from 0.05 to 0.85 by controlling the phase matching temperature of the nonlinear crystal for sum-frequency generation without change of the output pulse parameters.

• Medical Lasers
• /
• 제10권3호
• /
• pp.185-188
• /
• 2021

Onychomycosis is the most common disease of the nail, with a worldwide prevalence of 5.5%. It causes local pain, paresthesia, and cosmetic problems and decreases the patients' quality of life. Conventional treatments include the administration of topical and systemic agents. However, factors such as subungual hyperkeratosis and biofilm formation may affect the efficacy of these treatments. Moreover, side effects associated with systemic agents are a major concern for patients. Therefore, various novel treatments are being developed; among them, photodynamic therapy (PDT) and Nd:YAG laser are promising, and several studies have demonstrated the efficacy and safety of PDT and laser therapy. Here, we report the efficacy and tolerability of PDT combined with 1064-nm Nd:YAG laser therapy and topical efinaconazole for the treatment of three patients with refractory onychomycosis.

• Medical Lasers
• /
• 제8권1호
• /
• pp.32-34
• /
• 2019

Postinflammatory hyperpigmentation (PIH) is a reactive hypermelanosis of the skin that occurs as a result of variable inflammatory processes, such as trauma, and many inflammatory conditions. Although a range of modalities of managing PIH have been reported, the treatment of PIH is challenging. In this report, a patient with PIH was treated using picosecond-domain Nd:YAG lasers. After three sessions of 1,064-nm picosecond-domain Nd:YAG laser treatment, the patient showed almost complete improvement with no remarkable side effects or recurrence over the duration of six months. Overall, 1,064-nm picosecond-domain Nd:YAG laser can be used effectively and safely for treating pigmented lesions in the dermis, particularly PIH, in Asian patients.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.626-631
• /
• 2002

This paper describes the weldability and mechanical behavior of JIS S45C medium carbon steel (corresponding to KS SM45C and SAE 1045) for machine structures in CW Nd:YAG laser welding. ill general, medium carbon steels have a limited application to the industrial fields in spite of good mechanical characteristics. This is due to welding difficulty because of the high carbon contents and impurities in this material. Therefore, in this study the laser weldability of medium carbon steel with adjusted contents of S and P has been investigated in order to extend the application to medium carbon steels. Several experiments and numerical simulations have been conducted to determine the characteristics of mechanical behavior in CW Nd:YAG laser welds. The results of the simulations concur with the experiment results. From the result of this study, the application possibility of CW Nd:YAG laser welding to medium carbon steel has been confirmed. Also, the appropriateness of mechanical behavior simulation has been verified to analyze and predict the welding phenomena.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1703-1705
• /
• 2001

The pulsed Nd:YAG laser is used widely for materials processing and medical instrument etc. It is important to control the laser energy in those fields using a pulsed Nd:YAG laser. In this paper, constant-frequency current resonant half-bridge inverter and Cockcroft-Walton circuit are used to charge the energy storage capacitor variably. This laser power supply is designed and fabricated which has no high-voltage transformer, less switching losses, compact size and capability in varying the laser output power. Also, the output characteristics of this Nd:YAG laser system are investigated. The tested results are described.

• 한국생산제조학회지
• /
• 제20권6호
• /
• pp.720-728
• /
• 2011

Lap joint welding conducts low carbon steel plates using a 2.0kW continuous wave Nd:YAG laser beam. The specimen is composed of thin plate of 20 sheets. Process Variables contain two controlled parameters of the laser power and the welding speed. In order to quantitatively examine the characteristics of the lap welding, the welding quality of the cut section, stain-stress behavior, and the hardness of the welded part are investigated. The weld width difference between the top and the bottom because the welding speed is increased. The reason, cooling rate is decreased because of fast welding speed. When the heat input is higher, larger volume of the base metal will melt and the welding heat has longer time to conduct into the bottom from the top. The microstructure and tensile properties of the joints are investigated in order to analyze the effects of heat input on the quality of laser welded specimen. From the results of the investigation, We observe that welding quality is good for the laser power of 1800W, and laser welding speed from 1.8m/min to 2.2m/min.

• Journal of Advanced Marine Engineering and Technology
• /
• 제30권5호
• /
• pp.629-635
• /
• 2006

Manufacture of motor by laser has been studying realization that was demands on market for lightening and miniaturization. Moreover. early in the 1980s. manufacture of parts for automobiles by laser welding was already successfully introduced. The purpose of this study was to develop production technology of the high quality laminated stator core for motor by pulsed Nd:YAG laser heat source. In the event of adjusting defocus and voltage to control humping in laser welding of the laminated core. sound bead could be obtained. but deep penetration was not. Therefore. explosive evaporating plasma was controlled by adjustment of peak power on pulse width. Particularly, because explosive evaporating plasma induced high peak power, made molten metal in keyhole scatter. a suitable adjustment of peak power was required to obtain sound bead. As a results of experiment. sound bead and deep penetration could be obtained.

• 한국표면공학회지
• /
• 제45권4호
• /
• pp.143-150
• /
• 2012

Laser cleaning have been found to be a useful cleaning tool to remove contaminants without inducing damage to the substrate and making secondary pollutant. In this study, the effect of Nd:YAG laser cleaning system, emitting at 1064 nm and 532 nm, on acrylic resin applied onto copper coupons and pieces of bronze was investigated. The samples after laser cleaning tests were examined using microscopy, FT-IR, SEM-EDS. As a result, the acrylic resin could be removed from most of the samples at low laser energy density. Laser wavelength 532 nm was more effective than 1064 nm because of using lower laser energy density, which could reduce heat damage to substrates. Although the acrylic resin was easily removed, it revealed melted surfaces and removed bronze patina which must remain. The problems should be solved by future studies using different laser system or laser wavelengths.

• 대한소아치과학회지
• /
• 제30권4호
• /
• pp.660-666
• /
• 2003

치아우식증은 산에 의해 법랑질이 탈회되는 현상으로 소아 및 청소년기에 가장 흔히 발생하는 구강질환 중의 하나로서, 치아우식증의 원인요소 중 다른 인자들보다 객관적으로 조사할 수 있는 구강내 세균에 대한 연구가 활발히 이루어져 왔다. 이 연구는 구강내의 치태라는 고체상태의 조건과 유사한 상태로 Er:YAG 레이저가 구강내 산 생성세균인 S. mutans의 증식에 미치는 영향 및 레이저의 조사시간에 따른 차이를 평가하고자 하였다. Er:YAG 레이저의 구강내 산 생성 세균인 S. mutans에 대한 증식억제효과를 평가하기 위하여 S. mutans pellet에 Er:YAG 레이저를 비접촉식 방법으로, 50mJ, 10Hz, 그리고 조사시간을 1초, 3초, 5초, 7초, 9초로 달리하여 조사하고 이때의 세균의 성장률과 산 생성능을 0, 2, 4, 8, 12, 24, 36, 48시간 동안 측정한 결과 다음과 같은 결과를 얻었다. 1. 레이저를 조사한 군이 레이저를 조사하지 않은 대조군에 비해 세균의 성장률이 감소되었다(P<0.01). 2. 레이저를 조사한 후 12시간까지 1, 3, 5초 조사군에 비해 7, 9초 조사군에서 세균의 성장율이 유의하게 감소되었으나(P<0.05), 24시간 후부터는 서로 유의할만한 차이를 보이지 않았다. 3. 레이저를 조사한 시간이 증가함에 따라 세균의 산 생성능력이 회복되는 시간이 길어짐이 관찰되었고 24시간 후에는 대조군과 차이를 보이지 않음으로써 일정 시간 이후에는 점차적으로 산 생성능력이 회복됨을 알 수 있었다.