• The Korean Journal of Physiology and Pharmacology
• /
• v.11 no.1
• /
• pp.15-20
• /
• 2007

To investigate whether hydrogen peroxide($H_2O_2$) affects intestinal motility, pacemaker currents and membrane potential were recorded in cultured interstitial cells of Cajal(ICC) from murine small intestine by using a whole-cell patch clamp. In whole cell patch technique at $30^{\circ}C$, ICC generated spontaneous pacemaker potential under current clamp mode(I=0) and inward currents(pacemaker currents) under voltage clamp mode at a holding potential of -70 mV. When ICC were treated with $H_2O_2$ in ICC, $H_2O_2$ hyperpolarized the membrane potential under currents clamp mode and decreased both the frequency and amplitude of pacemaker currents and increased the resting currents in outward direction under voltage clamp mode. Also, $H_2O_2$ inhibited the pacemaker currents in a dose-dependent manner. Because the properties of $H_2O_2$ action on pacemaker currents were same as the effects of pinacidil(ATP-sensitive $K^+$ channels opener), we tested the effects of glibenclamide(ATP-sensitive $K^+$ channels blocker) on $H_2O_2$ action in ICC, and found that the effects of $H_2O_2$ on pacemaker currents were blocked by co- or pre- treatment of glibenclamide. These results suggest that $H_2O_2$ inhibits pacemaker currents of ICC by activating ATP-sensitive $K^+$ channels.

• Communications of the Korean Mathematical Society
• /
• v.32 no.1
• /
• pp.193-200
• /
• 2017

Given a pair p, q of relative prime positive integers, we have uniquely determined positive integers x, y, u and v such that vx-uy = 1, p = x + y and q = u + v. Using this property, we show that$${\sum\limits_{1{\leq}i{\leq}x,1{\leq}j{\leq}v}}\;{t^{(i-1)q+(j-1)p}\;-\;{\sum\limits_{1{\leq}k{\leq}y,1{\leq}l{\leq}u}}\;t^{1+(k-1)q+(l-1)p}$$ is the Alexander polynomial ${\Delta}_{p,q}(t)$ of a torus knot t(p, q). Hence the number $N_{p,q}$ of non-zero terms of ${\Delta}_{p,q}(t)$ is equal to vx + uy = 2vx - 1. Owing to well known results in knot Floer homology theory, our expanding formula of the Alexander polynomial of a torus knot provides a method of algorithmically determining the total rank of its knot Floer homology or equivalently the complexity of its (1,1)-diagram. In particular we prove (see Corollary 2.8); Let q be a positive integer> 1 and let k be a positive integer. Then we have $$\begin{array}{rccl}(1)&N_{kq}+1,q&=&2k(q-1)+1\\(2)&N_{kq}+q-1,q&=&2(k+1)(q-1)-1\\(3)&N_{kq}+2,q&=&{\frac{1}{2}}k(q^2-1)+q\\(4)&N_{kq}+q-2,q&=&{\frac{1}{2}}(k+1)(q^2-1)-q\end{array}$$ where we further assume q is odd in formula (3) and (4). Consequently we confirm that the complexities of (1,1)-diagrams of torus knots of type t(kq + 2, q) and t(kq + q - 2, q) in [5] agree with $N_{kq+2,q}$ and $N_{kq+q-2,q}$ respectively.

• Korean Journal of Agricultural Science
• /
• v.15 no.2
• /
• pp.143-152
• /
• 1988

This study was conducted to obtain basic data which affected engine performance of the power tiller being widely used in the rural area. Among the various factors affected engine performance, only flywheel weight was considered as the major factor in this study. Fuel consumption ratio, motoring loss, torque, vibration and mechanical efficiency of the engine tested were measured and analyzed on the four levels of flywheel weight (32.2, 29.7, 26.4, 24.2 kg). The results obtained were as follows: 1. The maximum output of 6 and 7.5 kW engine was 7.43 kW and 7.85 kW respectively. When flywheel weight was reduced from 32.2 kg to 24.2 kg, output power of the engine was increased 0.27 kW in 6 kW engine and increased 0.39 kW in 7.5 kW engine. 2. The fuel consumption ratio was decreased from 300.8 to 296.8 g/kW-hr in 6 kW engine and decreased from 313.6 to 312.8 g/kW-hr in 7.5 kW engine when the flywheel weight was reduced from 32.2 kg to 24.2 kg. 3. The mechanical efficiencies of the engine was increased from 76.1 to 76.8% in 6 kW engine and increased from 76.7 to 77.0% in 7.5 kW engine when the flywheel weight was reduced from 32.2 kg to 24.2 kg. 4. When the flywheel weight was reduced from 32.2 kg to 24.2 kg, a tendency of a little decrease of vibration at X- and Z-axis in 6 kW engine and of a little increase of vibration at Y-axis in 6 kW engine and all directions in 7.5 kW engine was observed. 5. Motoring losses was decreased from 2.33 to l.76 kW in 6 kW engine and decreased from 2.46 to 1.84 kW in 7.5 kW engine when the flywheel weight was reduced from 32.2 kg to 24.2 kg. From the above results and the flywheel weight calculated theoretically, it was recommendable that the flywheel weight should be reduced about 7 kg in 6 kW engine and about 10 kg in 7.5 kW engine, respectively.

• Journal of the Korean Chemical Society
• /
• v.31 no.4
• /
• pp.344-351
• /
• 1987

Kinetic studies on the complexing of $[Mo_2O_4(H_2O)_6]^{2+}$ with thiocyanate have been carried out using the spectrophotometric method. The observed rate constant is given by, $k_{obsd}=\{\\k_0+k_H[H^+]\}\;[SCN^-]^2+k_r$. At $25^{\circ}C$ and ionic strength of 2.84 the values of $k_f\;and\;k_r\;are\;5.96{\pm}0.35\;M^{-2}s^{-1}\;and\;(5.45{\pm}4.77){\times}10^{-4}s^{-1}$, respectively. Activation parameters from data at $20^{\circ}$∼$35^{\circ}C\;are\;{\Delta}H^*=38.04{\pm}5.31kJmol^{-1}\;and\;{\Delta}S^*=-172.69JK^{-1}mol^{-1}$. The mechanisms are discussed.

• Journal of the Korean Ceramic Society
• /
• v.35 no.9
• /
• pp.933-938
• /
• 1998

The hydration for the system of fluorogypsum and 20wt% blast furnace slag was investigated at liquid/soild ratio of 0.45 for 1, 3, and 7 days by using 3 kinds of accelerators such as K2SO4 Al2(SO4)3 $.$16-18H2O and AlK(SO4)2$.$12H2O After curing the hardened specimen was characterized by the compressive strength the content of combined water XRD, DTA and SEM It was found that the activating effect was increased in the order of K2SO4

• Journal of KIISE:Computer Systems and Theory
• /
• v.28 no.8
• /
• pp.399-405
• /
• 2001

이 논문은 재귀원형군 G(2$^{m}$ , 2$^{k}$ )의 강한 해밀톤 성질을 그래프 이론적 관점에서 고찰한다. 재귀원형군은 [9]에서 제안된 다중 컴퓨터의 연결망 구조이다. G(2$^{m}$ , 2$^{k}$ )가 임의의 정점 쌍 ν, $\omega$를 잇는 길이 ι인 경로를 가지는가 하는 문제를 고려하여, (a) G(2$^{m}$ , 2$^{k}$ )는 ι$\geq$d(ν, $\omega$)을 만족하는 모든 ι에 대해서 길이 ι인 경로를 가지며, (b) G(2$^{m}$ , 4)는 ι$\geq$d(ν, $\omega$)+2인 모든 길이의 경로를 가지며, (c)G(2$^{m}$ , 2$^{k}$ ), k$\geq$3은 길이 d(ν, $\omega$)+2$^{k}$ -3인 경로를 가지지 않는 정점 쌍이 있음을 보인다. 여기서, d(ν, $\omega$)는 ν와 $\omega$ 사이의 거리이다.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.10
• /
• pp.3065-3072
• /
• 2013

Direct synthesis of $H_2O_2$ and in situ oxidative desulfurization of model fuel over Au/Ti-HMS and Au/TS-1 catalysts has been comparatively investigated in water or methanol. Maximum amount (82%) of active $Au^0$ species for $H_2O_2$ synthesis was obtained. Au/Ti-HMS and Au/TS-1 exhibited the contrary performances in $H_2O_2$ synthesis as $CH_3OH/H_2O$ ratio of solvent changed. $H_2O_2$ decomposition and hydrogenation in water was inhibited by the introduction of methanol. Effect of $O_2/H_2$ ratio on $H_2O_2$ concentration, $H_2$ conversion and $H_2O_2$ selectivity revealed a relationship between $H_2O_2$ generation and $H_2$ consumption. The highest dibenzothiophene removal rate (83.2%) was obtained over Au/Ti-HMS in methanol at 1.5 of $O_2/H_2$ ratio and $60^{\circ}C$. But removal of thiophene over Au/TS-1 should be performed in water without heating to obtain a high removal rate (61.3%). Meanwhile, $H_2$ conversion and oxidative desulfurization selectivity of $H_2$ were presented.

• Journal of Hydrogen and New Energy
• /
• v.19 no.6
• /
• pp.505-513
• /
• 2008

The two-step thermochemical cycle was examined on the $CeO_2$, YSZ, and $ZrO_2$-supported $NiFe_2O_4$ to investigate the effects of support material addition. The supported $NiFe_2O_4$ was prepared by the aerial oxidation method. Thermal reduction was conducted at 1573K and 1523K while water-splitting was carried out at 1073K. Supporting $NiFe_2O_4$ on $CeO_2$, YSZ and $ZrO_2$ alleviated the high-temperature sintering of iron-oxide. As a result, the supported $NiFe_2O_4$ exhibited greater reactivity and repeatability in the water-splitting cycle as compared to the unsupported $NiFe_2O_4$. Especially, $ZrO_2$-supported $NiFe_2O_4$ showed better sintering inhibition effect than other supporting materials, but hydrogen production amount was decreased as cycle repeated. In case of $CeO_2$-supported $NiFe_2O_4$, improvement of hydrogen production was found when the thermal reduction was conducted at 1573K. It was deduced that redox reaction of $CeO_2$ activated above 1573K.

• Journal of the Korean Chemical Society
• /
• v.36 no.1
• /
• pp.137-146
• /
• 1992

The adsorption properties of CO on the cation exchanged natural zeolite, $K_{111}$ and cation effects upon the CO adsorption were studied. $Na^+-,\;Cu^{2+}-\;and\;Ba^{2+}-\;K_{111}$ exhibited relatively good CO adsorption capacities and $Ba^{2+}- K_{111}$ treated by 0.4 N-$BaCl_2$ solution proved itself as the best adsorbent and superior to the synthetic zeolite 4A and 5A. The observed adsorption tendency due to the cations were in the order of $Ba^{2+}>Cu^{2+}>Na^+>K^+>Mg^{2+}>Ca^{2+}$. The cation exchanged number per unit cell as well as the kind of cation which forms bond with CO molecules in different intensities and other mineral factors such as pore size indicated to be important factors to the CO adsorption properties. The CNDO/2 calculations were performed to compare the adsorption tendencies and CO interaction energy of cations in $K_{111}$.

• The Bulletin of The Korean Astronomical Society
• /
• v.30 no.2
• /
• pp.79.2-79.2
• /
• 2005