• 제목/요약/키워드: Y123

검색결과 9,110건 처리시간 0.039초

파킨슨병과 본태성 진전의 감별진단에서 I-123 IPT(I-123-N-(3-iodopropen-2-yl)-$2{\beta}$-carbomethoxy-$3{\beta}$-(4-cholorophenyl) tropane) 뇌 단일광전자방출 전산화단층촬영의 역할 (Differentiation of Parkinson's Disease and Essential Tremor on I-123 IPT(I-123-N-(3-iodopropen-2-yl)-$2{\beta}$-carbomethoxy- $3{\beta}$-(4-cholorophenyl) tropane) Brain SPECT)

  • 배문선;최태현;안성민;최재용;류원기;이재훈;유영훈
    • Nuclear Medicine and Molecular Imaging
    • /
    • 제43권2호
    • /
    • pp.100-106
    • /
    • 2009
  • 목적: 파킨슨병은 비교적 흔한 운동장애질환으로 흑질(substantia nigra)의 도파민성 신경세포와 해당되는 기저핵의 도파민 함유 신경말단의 퇴행성 변화에 의하여 선조체에서의 도파민 운반체 농도도 감소하는 것으로 알려져 있다. 본 연구는 I-123 IPT SPECT에서 선조체의 도파민 특이결합과 후두염 뇌피질의 비특이 결합비를 이용하여 초기 및 진행된 파킨슨병 환자군과 본태성 진전 등의 다른 운동장애 질환군, 정상 대조군에서 도파민 운반체 영상을 비교하였다. 대상 및 방법: 정상 대조군 50명과 초기 파킨슨병 환자군 20명, 진행된 파킨슨병 환자군 30명, 본태성 진전환자군 20명을 대상으로 I-123 IPT를 정맥 주사후 20분과 2시간 후에 SPECT 영상을 획득하고 재구성하였다. 후두염에 배후방사능 관심영역을 그리고 선조체의 I-123 IPT의 특이/비특이 결합비를 구하여 각 군간의 차이를 정량적 및 정성적으로 비교하여 보았다. 결과: 선조체의 I-123 IPT의 특이/비특이 결합비는 진행된 파킨슨병 환자군과 정상 대조군에서는 평균값의 차이가 유의하였다. 그러나 초기 파킨슨병 환자군과 본태성 진전 환자군 사이에는 특이/비특이 결합비가 중첩됨이 관찰되었다. 정상 대조군과 본태성 진전환자군에서는 2시간 영상이 20분 영상에 비하여 특이/비특이 결합비도 높게 나타났고 표준 편차도 적었다. 진행된 파킨슨병 환자에서는 20분 영상과 2 시간 영상의 특이/비특이 결합비는 차이가 없었고 그 값도 낮았다. 편측 파킨슨병 환자에서 I-123 IPT의 특이/비특이 결합비는 증상이 나타난 반대측 선조체뿐만 아니라 같은쪽 선조체에서도 감소되어 있었다. 초기 파킨슨 환자20명 중 편측 증상을 보인 7명의 환자에서 I-123 IPT SPECT상의 좌우측 선조체간의 특이/비특이 결합비 간의 차이를 이용한 편측화 결과는 임상 증상의 편측화와 일치하였다. 결론: I-123 IPT SPECT는 진행된 파킨슨병의 진단과 치료에 따른 임상경과 진행의 객관적인 지표로서의 역할을 할 수 있을 것으로 생각되며 임상 증상이 발현되기 전단계의 초기 파킨슨병의 진단이나 파킨슨병과 유사한 운동증상을 보일 수 있는 다른 운동질환군과의 감별진단에 있어서는 각 군간의 중첩되는 비율이 있으므로 적용에 신중을 기해야 하겠다.

발화합성법에 의한 YBa2Cu3O6+x 초전도 선재의 제조 (Preparation of YBa2Cu3O6+x Superconducting Wires Prepared by Pyrophoric Synthetic Technique)

  • 양석우;이영민;김영순;박정식;김찬중;홍계원;신형식
    • 공업화학
    • /
    • 제9권7호
    • /
    • pp.1011-1017
    • /
    • 1998
  • $YBa_2Cu_3O_{6+x}(Y123)-Ag$ 초전도 선재를 0/20 wt%의 은(Ag)을 첨가한 발화합성분말과 고상반응분말을 사용하여 플라스틱 압출법으로 제조하였다. 플라스틱 압출법은 분말제조, 플라스틱 paste 제조, 다이 압축, binder 소각 및 소결공정을 포함한다. 양질의 초전도체를 제조하려면 원료물질이 균질하고 미세한 분말이어야 한다. 0/20 wt%를 첨가한 $Y_2O_3-BaCO_3-CuO$ precursor 분말을 발화합성(PS)법과 고상반응(MM)법으로 제조하였다. 원료분말이 Y123 초전도상으로 전이되는 생성속도를 공기중에서 여러온도와 시간별로 반응시켜 알아보았다. 발화합성법으로 제조한 분말이 고상반응법으로 제조한 분말보다 Y123상으로 빠르게 전이되었다. 이것은 PS법으로 제조한 분말이 미세한 크기와 균질한 화학적 조성으로 인해 Y123상으로 빠른 전이를 한 것이기 때문이다. 플라스틱 압출법으로 제조한 Y123-Ag 초전도 선재의 임계전류밀도($J_c$)는 원료분말의 특징에 따라 $150{\sim}230A/cm^2$값을 나타내었다. 은을 20 wt.% 첨가한 발화합성분말로 제조한 선재의 $J_c$$230A/cm^2$이었다.

  • PDF

항진균성 물질을 생산하는 지의류 내생 곰팡이의 선별 및 특성 (Isolation and Characteristics of Endolichenic Fungi Producing Antifungal Compound)

  • 황현국;김이나;백근식;최상기
    • 미생물학회지
    • /
    • 제47권1호
    • /
    • pp.97-101
    • /
    • 2011
  • 새로운 항진균성물질을 분리할 목적으로 지의류은행에서 107종의 지의류 내생 곰팡이를 분양받아 이들의 항진균성 활성을 조사하였다. Candida albicans를 이용한 항진균 활성검사에서 2종류의 지의류 내생 곰팡이 EL123과 EL156을 최종적으로 선별하였다. 이들은 MYA 배지와 EMM 배지에서 공통적으로 높은 곰팡이 성장저해능을 보였다. 지의류 내생 곰팡이의 5.8S rRNA를 포함하고 있는 internal transcribed spacer 부분을 PCR 증폭 후 nucleotide sequence 분석 및 NCBI Blast 분석 결과 EL123 (JF714250)은 Thielavia microspora와 염기서열이 95%의 유사도를 보였고, EL156 (JF714251)은 Cryptosporiopsis diversispora와 99%의 유사도를 보였으며, 2종 모두 자낭균류(ascomycetes)에 속하였다. 형태적 특성으로는 EL123은 가지 친 형태의 균사가 관찰되었고, EL156은 직선형의 균사가 관찰되었으며, EL156이 EL123보다 액체배양 중에 많은 양의 항진균성 물질을 생성하였다.

다공판을 사용한 R-123 풀비등 열전달 촉진 (Pool Boiling Enhancement of R-123 Using Perforated Plates)

  • 김내현
    • 대한기계학회논문집B
    • /
    • 제40권5호
    • /
    • pp.275-281
    • /
    • 2016
  • 본 연구에서는 비등표면 위에 다공판을 설치하여 풀비등을 촉진시키는 방안에 대하여 검토하였다. 실험은 대기압에서 R-123을 사용하여 수행되었다. 다공판은 풀비등을 현저히 촉진시켰다. 이는 다공판이 기포를 비등표면 위에 넓게 퍼뜨려 기포와 비등표면 사이 액막의 면적을 증가시키기 때문이다. 또한 높은 열유속에서는 다공도가 클수록, 낮은 열유속에서는 다공도가 작을수록 비등이 촉진되었다. 본 연구에서는 구멍 직경 2.0 mm, 구멍 간격 $2.5mm{\times}5.0mm$ 또는 $5.0mm{\times}5.0mm$, 비등 표면과의 간격 0.5 mm에서 최적 형상이 얻어졌고 이 형상들의 열전달계수는 상용 GEWA-T의 값에 근접하였다. R-123에서의 최적 다공도는 물이나 에탄올에서 보다 현저히 큰데 이는 R-123의 밀도비가 크고 증발잠열은 작기 때문이다. 한편 다공판의 비등이력은 평판보다 작았다.

REBa2Cu3O7-x (RE=Nd, Gd, Dy) 초전도체의 열처리에 따른 상변태와 미세구조 (Phase Transformation and Misconstruct of REBa2Cu3O7-x (RE=Nd, Gd, Dy) Superconductor during Heat treatment)

  • 오용택;한용희;한병성;한상철;성태현;홍광준;신동찬
    • 한국전기전자재료학회논문지
    • /
    • 제16권12S호
    • /
    • pp.1278-1285
    • /
    • 2003
  • This study investigated the phase transformation of the REBa$_2$Cu$_3$$O_{7-x}$ (RE=Nd, Gd, Dy) superconductor, and CCT (Continuous-Cooling-Transformation) along with the TTT (Time-Temperature-Transformation) diagrams are suggested according to the isothermal and continuous cooling heat-treatments. The peritectic temperature of the 123 phases decreased approximately 3$0^{\circ}C$ when the ionic radius of the rare-earth elements was reduced. The optimum cooling rate where BC and Cu-free phases do not exist was 0.001$^{\circ}C$/s. At this cooling late, the 123 phase grew with a c-axis Perpendicular to the surface and had a well-distributed 211 phase. When the oxygen partial pressure was reduced Outing isothermal heat-treatment, the formation temperature of the 211 phase decreased. In addition, the formation temperature of the 123 phases decreased from 100$0^{\circ}C$ (Nd-123) to 9$25^{\circ}C$ (Gd-123), and finally 875$^{\circ}C$ (Dy-123) according to the decrease in the ionic radius of the tare-earth elements. Compared to Nd-123, Gd- and Dy-123 had a better texture with a well-distributed 211 phase.e.

$^{124}Te$ Target로 생산된 $^{123}I$ SPECT 영상에서의 조준기 선택 (Collimator Selection in $^{124}Te$ generated $^{123}I$ SPECT imaging)

  • 김희중;손혜경;봉정균;남기표;이희경
    • 대한의용생체공학회:학술대회논문집
    • /
    • 대한의용생체공학회 1996년도 춘계학술대회
    • /
    • pp.45-48
    • /
    • 1996
  • In the case of $^{123}I$ from the $^{124}Te$ (p,2n)reaction, the radionuclidic impurity is the high-energy gamma-emitting $^{124}I$, which interferes greatly with nuclear medicine images. The choice of a collimator can affect the quality of clinical SPECT images of [I-123]MIBG or [I-123]TPT. The tradeoffs that two different collimators make among spatial resolution, sensitivity, and scatter were studied by imaging a line source at 5cm, 10cm, 15cm distance using a number of plexiglass sheets between source and collimator, petri dist two-dimensional Hoffman brain phantom, and Jaszczak phantom after filling with $^{123}I$ (FWHM, FWTM, Sensitivity) for low energy ultra high resolution parallel hole(LEUHRP) collimator and medium energy general purpose (MEGP) collimator were measured as (9.27mm, 61.27mm $129CPM/[\mu}$ Ci) and (10.53m 23.17mm $105CPM/{\mu}$ Ci), respectively. The image quality of two-dimensional Hoffman brain Phantom with LEUHRP looked better than the one with MEGP. However, the image quality of Jasgczak phantom with LEUHRP looked much worse than the one with MEGP, The results suggest that the MEGP is preferable to LEUHRP for SPECT studies of [I-123]MIBG or [I-123]IPT.

  • PDF

HCFC-123의 급성 독성간질환 발생 사례에 따른 노출기준 및 법 관리 필요성 권고 (Recommendation of an Occupational Exposure Limit and Legal Control Following an Acute Hepatotoxicity Incident from HCFC-123)

  • 이권섭;조지훈;최보경;이혜림;변상훈
    • 한국산업보건학회지
    • /
    • 제28권1호
    • /
    • pp.80-90
    • /
    • 2018
  • Objectives: This study was performed to propose a domestic occupational exposure limit(OEL) following a health hazard assessment, calculation of a non-carcinogenicity reference concentration worker($RfC_{worker}$) value, and examination of international agencies' exposure limits. It also recommends legal management within the Occupational Safety and Health Act for HCFC-123, which caused an acute hepatotoxicity incident. Methods: An acute hepatotoxicity incident due to the fire extinguishing agent HCFC-123 was investigated. Toxicological hazard and health hazard classifications were examined and a non-carcinogenicity $RfC_{worker}$ value was calculated for HCFC-123. An OEL and the necessity of legal management were recommended as well. Results and Conclusions: An OEL for HCFC-123 of 10 ppm($62.5mg/m^3$), which considered the $RfC_{worker}$ value, 5.56 ppm, produced in dose-response assessment and the exposure level of 19.1-20.9 ppm measured as an eight-hour TWA(time-weighted average) in the incident place, is recommended. HCFC-123 is urged to be included as a chemical requiring legal management in the Occupational Safety and Health Regulations. In addition, it is recommended that a peak exposure of ACGIH be adopted in the Notice of the Ministry of Employment and Labor.

수용성 황색색소를 분비하는 Bacillus sp. PY123균주의 분리 및 특성

  • 김지연;김광현
    • 한국미생물·생명공학회지
    • /
    • 제25권5호
    • /
    • pp.454-458
    • /
    • 1997
  • To develop a yellow pigment for a food-additive, a strain producing a water-soluble yellow pigment was isolated from phylloplane of tree leaf. The strain PY123 was identified a Bacillus sp. based on morphological and biochemical characterization such as a bacillus form, mortility, spore formation, Gram positive, and catalase production. The pigment production of the strain PY123 was increased about 3 times in patato broth containing 1% sucrose and 0.1 mM CoCl$_{2}$ than in only potato broth after incubation at 30$circ$C, for 2 days. When 0.1 mM CoCl$_{2}$, was added in potato broth containing 1% sucrose at late log phase during incubation of the strain PY123, cell growth was not inhibited, and the period at maximal pigment production of the strain PY123 was about 12hrs faster than in potato broth containing 1% sucrose and 0.1 mM CoCl$_{2}$, simultaniously.

  • PDF

78K에서 수소 혹은 중수소 흡착으로 인한 W(123)면의 일함수 변화 (Work Function Change of W(123) Plane Due to Hydrogen and Deuterium Adsorption at 78K)

  • 박노길;김기석;김성수;정광호;황정남;최대선
    • 한국진공학회지
    • /
    • 제1권1호
    • /
    • pp.78-82
    • /
    • 1992
  • W(123) 표면위에 수소와 중소수가 흡착될 때 일함수의 변화를 장방출(Field Fmission) 방법으로 측정하였다. 78K에서 이 분자들이 흡착될 때 일함수의 변화는 처음에 는 증가하다가 최대치에 이른 후 감소하였고, 덮임율(coverage)이 증가함에 따라 포화되었 다. 텅스텐 tip의 온도를 200K까지 올렸을 경우에, 일함수의 변화가 최대가 되었을 때의 덮 임율은 78K일 때의 비해 낮은 덮임율 쪽으로 이동하였고, [011] 방향을 갖는 step 혹은 terrace에 의한 일함수의 효과도 동시에 관측되었다.

  • PDF

MC-50 싸이클로트론을 이용한 $^{123}I$ 제법 연구 (The Development of Iodine-123 with MC-50 Cyclotron)

  • 서용섭;양승대;전권수;이종두;한현수
    • 대한핵의학회지
    • /
    • 제25권2호
    • /
    • pp.286-293
    • /
    • 1991
  • $^{123}I$, which is applied for the thyroid and other in vivo kinetic study, has a special role in life sciences. The 159 KeV $\gamma-ray$ from $^{123}I$ is almost ideally appropriate for the current imaging instrumentation. Its decay mode (electron capture) and short half-life (13.3 hr) reduced the burden of radiation dose to the patients, and its chemical property makes it easy to synthesize the labelling compounds. In this experiment, the production of $^{123}I$ via the nuclear reaction $^{124}Te(p,2n)^{123}I$ with 28 MeV protons was sutdied. $TeO_2$ is used as a target material, because it has good physical properties. The target was prepared with $TeO_2$ powder and was molten into a ellipsoidal cavity (a=14 mm, b=10 mm, $270.8mg/cm^2$ thick) of pure platinum. The irradiation was carried out in the external proton beam with incident energies range from 28 MeV to 22 MeV, and current was $30{\mu}A$. The loss of $TeO_2$ target was significantly reduced by using $4\pi-cooling$ system in irradiation. The dry distillation method was adopted for the separation of $^{123}I$ from irradiated target, and when it was kept 5 minutes at $780^{\circ}C$, its result was quantitative. The loss of the target material $(TeO_2)$ was below 0.2% for each production run and $^{123}I$ from the dry distillation apparatus was captured with 0.01 N NaOH in $Na^{123}I$ form, then the pH of the solution was adjusted to $7.5\sim9.0$ with HC1/NaOH. The $Na^{123}I$ solution was passed through $0.2{\mu}m$ membrane filter, and sterilized under high pressure and temperature for 30 minutes. The production of $^{123}I$ is acceptable for clinical application based on the quality of USP XXI.

  • PDF