• 대한기계학회논문집A
• /
• 제34권9호
• /
• pp.1299-1304
• /
• 2010

압연실험을 통해서 폭 방향 변형 편차가 존재하는 실리콘 강판의 가공파손을 고찰하였다. 폭 방향 변형 편차는 강판에 웨이브를 발생시키고 압연방향으로 소재의 에지 부위(혹은 센터 부위)에 인장(혹은 압축)을 준다. 실제 압연기에서 발생하는 웨이브를 실험실적으로 구현하기 위해서 공형롤을 설계 및 제작하였다. 실험에 사용한 소재는 고-실리콘(약 3%) 강판이다. 본 실험을 통해서 센터 웨이브에 의해 발생되는 에지 부위 인장응력이 가공파손에 가장 지배적인 요인이라는 것이 제시되었다. 센터 웨이브를 일으키는 폭 방향 변형 편차의 정도에 따라 에지 파손과 지그재그 형태의 시편 중심 절손을 유발한다는 결과도 도출하였다.

• Geomechanics and Engineering
• /
• 제14권1호
• /
• pp.51-60
• /
• 2018

The foundations are classified into shallow and deep, which have important differences: in terms of geometry, the behavior of the soil, its structural functionality, and its constructive systems. The shallow foundations may be of various types according to their function; isolated footings, combined footings, strip footings, and slabs foundation. The isolated footings are of the type rectangular, square and circular. The combined footing may be rectangular, trapezoidal or T-shaped in plan. This paper presents a new model for T-shaped combined footings to obtain the most economical contact surface on the soil (optimal dimensioning) to support an axial load and moment in two directions to each column. The new model considers the soil real pressure, i.e., the pressure varies linearly. The classical model uses the technique of test and error, i.e., a dimension is proposed, and subsequently, the equation of the biaxial bending is used to obtain the stresses acting on each vertex of the T-shaped combined footing, which must meet the conditions following: The minimum stress should be equal or greater than zero, and maximum stress must be equal or less than the allowable capacity that can withstand the soil. To illustrate the validity of the new model, numerical examples are presented to obtain the minimum area of the contact surface on the soil for T-shaped combined footings subjected to an axial load and moments in two directions applied to each column.

• 한국정밀공학회지
• /
• 제15권8호
• /
• pp.174-182
• /
• 1998

This paper describes a research work of developing a computer-aided design and machining of irregular shaped-sheet metal product for blanking or piercing operation. An approach to the CAD/CAM system is based on the knowledge-based rules. Knowledge for the CAD/CAM system is formulated from plasticity theories, experimental results and the empirical knowledge of field experts. The system has been written in AutoLISP on the AutoCAD and in customer tool kit on the SmartCAM with a personal computer and is composed of nine modules, which are input and shape treatment, flat pattern-layout, production feasibility check, blank-layout, strip-layout, die-layout, data conversion, modelling, and post-processor module. Based on knowledge-based rules, the system is designed by considering several factors, such as material and thickness of product, complexities of blank geometry and punch profile, diameter and material of a wire, and availability of press. This system is capable of generating NC data automatically according to drawings of die-layout module. Results which are carried out in each module will provide efficiencies to the designer and the manufacturer of blanking or piercing die in this field.

• 한국전자파학회논문지
• /
• 제12권4호
• /
• pp.562-569
• /
• 2001

본 논문은 T-모양 급전선을 갖는 마이크로스트립 슬롯 안테나의 최적 설계방법에 대하여 연구하였다. T-모양의 급전선을 갖는 마이크로스트립 슬롯안테나의 대역폭에 가장 큰 영향을 주는 설계변수는 급전선의 offset 위치로 가로 방향의 급전선 길이로서, 기판의 유전상수와 두께 그리고 슬롯 폭이 주어지면 설계한 안테나가 최대 대역촉을 갖도록 두 설계변수를 계산할 수 있는 식을 curve fitting을 통하여 유도하였다. 시뮬레이션하여 최대 대역폭을 갖도록 최적화 시킨 안테나의 offset 위치와 급전선 가로길이를 이식을 이용하여 계산한 값과 각각 비교하였고 그 결과가 잘 일치하였다.

• 한국정보통신학회논문지
• /
• 제18권4호
• /
• pp.805-810
• /
• 2014

본 논문에서는 종단 정렬된 스트립 쌍 도파기를 가지는 직렬 급전 다이폴 쌍 (series-fed dipole pair; SDP) 안테나의 특성에 관하여 연구하였다. 제안된 SDP 안테나는 두 개의 서로 다른 길이의 스트립 다이폴 안테나와 접지 반사기가 코플래너 스트립 (coplanar strip; CPS) 선로로 연결되어 있다. 두 번째 다이폴 위쪽에 추가된 스트립 쌍 도파기는 두 개의 직사각형 모양의 스트립이며 두 번째 다이폴의 양팔의 종단에 정렬되어 있다. 종단 정렬된 스트립 쌍 도파기의 길이와 폭에 따른 안테나의 특성 변화를 분석하여 대역폭 향상을 위한 최적의 설계 변수를 얻었다. 최적화된 SDP 안테나를 FR4 기판 상에 제작하고 특성을 실험한 결과 전압 정재파비(voltage standing wave ratio; VSWR)가 2 이하인 대역은 1.65-2.93GHz이고, 대역폭이 기존 SDP 안테나에 비해 증가함을 확인하였다.

• Steel and Composite Structures
• /
• 제6권6호
• /
• pp.531-555
• /
• 2006

H-shaped welded steel column members are fabricated by welding together pre-cut flanges and the web. Modern fabricators are increasingly using plasma-cutting technique instead of traditional flame cutting. Different fabrication techniques result in different degrees of geometric imperfections and residual stresses, which can have considerable influence on the strength of steel columns. This paper presents the experimental investigation based temperature profiles, geometric imperfections, and built-in residual stresses in plasma cut-welded H-shaped steel column members and in similar flame cut-welded H-shaped steel columns. Temperature measurements were taken during and immediately after the cutting operations and the welding operations. The geometric imperfections were established at closely spaced grid locations on the original plates, after cutting plates into plate strips, and after welding plate strips into columns. Geometric imperfections associated with plasma cut element and members were found to be less than those of the corresponding elements and members made by flame cutting. The "Method of Section" technique was used to establish the residual stresses in the plate, plate strip, and in the welded columns. Higher residual stress values were observed in flame cut-welded columns. Models for idealized residual stress distributions for plasma cut and flame cut welded sections have been proposed.

• 한국정밀공학회지
• /
• 제15권2호
• /
• pp.124-133
• /
• 1998

This paper describes a research work of developing a computer-aided design of blanking and piercing for irregular-shaped sheet metal products. An approach to the development of compact and practical CAB system is based on the knowledge-based rules. Knowledge for the CAD system is formulated from plasticity theories, experimental results and the empirical knowledge of field experts. The system has been written in AutoLISP on the AutoCAD with a personal computer. Based on knowledge-based rules, the system, STRT-DES, is designed by considering several factors, such as complexities of blank geometry and punch profile, availability of press equipment and standard parts, utilization ratio which minimizes the scrap in a single or a pairwise operation, bridge width, grain orientation and design requirements which maximize the strength of the part when subsequent bending is involved. This system checks a forming feasibility with both internal and external features, a dimension of blanked hole, and a corner and a fillet radius for irregualrly shaped sheet metal products. Therefore this system can carry out a die design for each process which is obtained from results of an automated blank layout drawing with a best utilization ratio for irregular shape of product that was successful in production feasibility check module and those of an automated strip layout drawing and generate part drawings and the assembly drawing of die set in graphic forms.

• International Journal of Internet, Broadcasting and Communication
• /
• 제12권1호
• /
• pp.37-44
• /
• 2020

In this paper, we proposed a compact printed monopole antenna with an inverted L-shaped slot for dual-band operations. Two operating frequency bands are achieved with the use of an inverted L-shaped slot etched on the radiating strip for bandwidth enhancement and a defected ground structure for return loss improvement in the higher frequency band. The measured results showthat the proposed antenna has impedance bandwidths (S₁₁< -10 dB) of 270 MHz (1.81-2.08 GHz) and 340 MHz (2.36-2.70 GHz), covering the required bandwidths for PCS (1850.5-1989.5 MHz), CDMA 2000 (1850-1990 MHz), TD-SCDMA (1880-2025 MHz) and 2.4 GHz WLAN (2400-2484 MHz). The measured return loss of the proposed antenna has a good value of approximately 27.2 dB at 2.4 GHz WLAN. The antenna's peak gains also have a high value of 1.92 dBi at 2 GHz and 2.12 dBi at 2.45 GHz. The proposed antenna shows omnidirectional radiation patterns over the entire frequency range of interest.

• Journal of electromagnetic engineering and science
• /
• 제18권1호
• /
• pp.46-51
• /
• 2018

In this paper, a planar printed hybrid short/open-ended slot antenna with capacitive coupling feed strips is proposed for hepta-band mobile applications. The proposed antenna is comprised of a slotted ground plane on the top plane and two capacitive coupling feed strips with a chip inductor on the bottom plane. At the low frequency band, the short-ended long slot fed by strip 1 generates its half-wavelength resonance mode, whereas the T-shaped open ended slot fed by strip 2 generates its quarter-wavelength resonance mode for the high frequency band. The antenna provides a wide bandwidth covering GSM850/GSM900/DCS/PCS/UMTS/LTE2300/LTE2500 operation bands. Moreover, the antenna occupies a small volume of $15mm{\times}50mm{\times}1mm$. The operating principle of the proposed antenna and the simulation/measurement results are presented and discussed.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2017년도 특별논문집
• /
• pp.63-66
• /
• 2017

All passenger ships aboard more than 36 passengers are to be able to easily find escape routes when the escape way by fire with flame spread were onboard vessel (incl. Ferry, Passenger, Ro-pax, Inland Ferry) It should be impossible by ordinary emergency lights. The international Maritime Organization (IMO) gives special requirement for luminescent evaluation onboard test procedure and applicable location of low location lighting. In order to maintain the residual light source for a certain time in the low location lighting with a strip-shaped light source, the light source material must be sufficiently exposed to the light due to the proper placement of the escape route. The lighting arrangement influence how maintain low location lighting strip luminescent which measured onboard in connection with what elements are mainly sustain luminescent.