• 한국정밀공학회지
• /
• 제13권9호
• /
• pp.46-53
• /
• 1996

This paper describes some research works of computer-aided design of blanking and piercing for stator and rotor parts and irregularly shaped sheet metal by press. An approach to the system is based on knowledge based rules. The process planning system by considering a blank layout for nesting of irregularly shaped sheet metal and an improved strip layout for stator and rotor parts and irregularly shaped sheet metal is implemented. Using this system, design parameters(utilization ratio, slitting width, pitch, working order, die blank shapes) are determined and output is generated in graphic forms. Knowledges for blank layout and strip layout are extracted from the plasticity theories, handbooks, relevant references and empirical know-hows of experts in blanking companies. The implemented system provides powerful capabilities for process planning of stator and rotor parts and irregularly shaped sheet metal.

• Structural Engineering and Mechanics
• /
• 제18권6호
• /
• pp.759-768
• /
• 2004

The torsion of a penny-shaped crack in a transversely isotropic strip is investigated in this paper. The shear moduli are functionally graded in such a way that the mathematics is tractable. Hankel transform is used to reduce the problem to solving a Fredholm integral equation. The crack tip stress field is obtained by taking the asymptotic behavior of Bessel function into account. The effects of material property parameters and geometry criterion on the stress intensity factor are investigated. Numerical results show that increasing the shear moduli's gradient and/or increasing the shear modulus in a direction perpendicular to the crack surface can suppress crack initiation and growth, and that the stress intensity factor varies little with the increasing of the strip's height.

• 한국식품위생안전성학회지
• /
• 제36권1호
• /
• pp.1-8
• /
• 2021

본 연구에서는 농약의 음성시료에서는 acetylcholinesterase와 acetylthiocholine을 반응시켜 +전하와 -전하를 가지는 thiocholine으로 분해되어 금 나노입자를 응집시켜 역 Y자 스트립상에서 청자색의 반응선(띠)을 형성하고 양성 시료에서는 생성시키지 않는 원리를 이용한 신속 농약 검출법을 개발하였다. 개발한 분석법은 유기인계 농약 말라옥손과 카바메이트계 농약 카보퓨란을 각각 10 ng/mL 수준까지 검출이 가능한 것으로 확인되었으며, 2종의 유기인계와 카바메이트계 농약(EPN, dichlorvos)에 대해 추가적으로 검출 한계를 확인한 결과에서도 10 ng/mL 수준까지 모두 검출 가능함을 확인할 수 있었다. 그러나 3종의 트리아진 계열의 농약과 각 1종의 피레스로이드, 카복사마이드, 페닐아마이드 및 유기염소계열의 농약에 대해서는 반응성이 없는 것으로 확인되어 유기인계와 카바메이트계 농약 분석에 적용이 가능한 것으로 확인되었다. 마지막으로, 임의로 오염시킨 농산물 시료를 대상으로 분석법의 회수율을 확인한 결과, 말라옥손에 대해서 96.4에서100.7%, 카보퓨란은 81에서112.7%의 회수율이 확인되어 본 연구에서 개발한 역 Y자 스트립을 농약 검출법으로 이용한다면 농산물과 농업환경 중 존재하는 유기인계 및 카바메이트계 잔류농약을 신속하게 검출할 수 있을 것으로 판단된다.

• 대한기계학회논문집B
• /
• 제29권1호
• /
• pp.16-26
• /
• 2005

Air-cooled heat sinks are employed in many electronic cooling applications since they provide significant heat transfer enhancement and operational flexibility. Strip-shaped fin heat sink is of interest and needs to be investigated as general cooling products for more applicability. The purposes of this study are to evaluate heat sink performance without bypass flow condition and to determine optimal heat sink geometries. The results show that the decreasing rate of thermal resistance of a heat sink decreases with increasing inlet air velocity, and the increasing rate of pressure drop increases with increasing inlet air velocity, but is not affected by input power. The increasing rate of optimal longitudinal fin spacing is larger than that of transverse fin spacing. The strip fin heat sink tested in this study showed better cooling performance compared to that of other plate fin type.matism. 2004; 50(11): 3504-3515.

• 한국전자파학회논문지
• /
• 제12권5호
• /
• pp.827-836
• /
• 2001

L자 형태의 스트립 급전 구조는 두꺼운 유전체 기판 (두께=0.1λ)을 갖는 마이크로 스트립 안테나에 있어 적합한 구조이다. L자 형태의 스트립 급전 구조는 방사 패치와 결합하여 캐패시턴스 성분을 발생시켜 스트립 자체에 의해 발생되는 인덕턴스 성분을 억제시킨다. 본 논문에서는 PCS대역(1,750~1,870 MHz)과 IMT-2000대역(1,920~2,170MHz)의 광대역 주파수(420 MHz)를 모두 만족시킬 수 있는 L자 형태로 급전되는 안테나를 두 개 배열한 형태의 안테나도 소개한다. 이들 두 안테나는 모두 패스밴드에서 안정된 방사패턴을 가지며 임피던스 대역폭은 중심주파수 (1,960 MHz)의 31%(VSWR<1.5, 615 MHz) 이상을 가지고 약 7 dBi의 평균 이득을 갖는다.

• 한국전기전자재료학회논문지
• /
• 제16권11호
• /
• pp.1023-1028
• /
• 2003

The field emission characteristics are studied by simulation for carbon nanotube triode structures with a strip-shaped emitter and a gate hole aligned with it. Two structures, one with double-edge and the other with single edge are analyzed. They show good emission characteristics. Emissions of electrons are concentrated on the edges of emitter and the emitted current increases as the distance between emitter and gate decreases. For single-edged emitter, the emitted electrons form a narow strip-shaped beam which has a good directionality. These triode structures have advantages in that they can be easily fabricated and aligned for assembly.

• Journal of electromagnetic engineering and science
• /
• 제15권1호
• /
• pp.6-13
• /
• 2015

In this paper, a novel monopole antenna for WLAN/WiMAX application is presented. The proposed antenna consists of two arc-shaped strips, a vertical strip, and a slot in the ground plane. In this study, a prototype of the proposed triple-band antenna was designed, fabricated, and tested. The quantitative and experimental results demonstrate that the proposed antenna satisfy the -10 dB impedance bandwidth requirement of 440 MHz for 2.4/2.5 GHz bands (from 2.26 to 2.70 GHz), 970 MHz for 3.5 GHz bands (from 3.27 to 4.24 GHz), and 870 MHz for the GHz bands (from 5.08 to 5.95 GHz), while simultaneously covering the WLAN and WiMAX bands. In addition, the presented triple-band antenna has an omnidirectional radiation pattern at all three frequency bands with an antenna gain of 4.45 dBi for the lowest band, 2.04 dBi for the middle band, and 3.98 dBi for the highest band.

• Steel and Composite Structures
• /
• 제4권3호
• /
• pp.247-263
• /
• 2004

Comparison of behaviour of shear connections by means of shear-connection strips (perfobond and comb-shaped strips) and headed studs under static and repeated loading, possible failure modes of concrete dowels and ways of the quantitative differentiation of some failure modes are described in the paper. The article presents a review of knowledge resulting from the analysis of shear-connection effects based on tests of perfobond and comb-shaped strips carried out in the laboratories of the Faculty of Civil Engineering of the Technical University of Kosice (TU of Kosice) in Slovakia and their comparison with results obtained by other authors.

• 한국정밀공학회지
• /
• 제15권3호
• /
• pp.18-23
• /
• 1998

This paper describes a research work of developing a computer-aided design of blanking and piercing for irregular-shaped sheet metal products. An approach to the CAD system is based on the knowledge-based rules. Knowledge for the CAD system is formulated from plasticity theories, experimental results and the empirical knowledge of field experts. The system has been written in AutoLISP on the AutoCAD with a personal computer and is composed of four main modules, which are input and shape treatment, flat pattern layout, production feasibility check, and strip layout module. Based on knowledge-based rules, the system is designed by considering several factors, such as radius and angle of bend. material and thickness of product, complexities of blank geometry and punch profile, and availability of press. This system is capable of unfolding a formed sheet metal part to give flat pattern and automatically account for the adjustment of bend allowances to match tooling requirements by checking the dimensions and relationships of parts of the folded product. Also this system can carry out a process planning which is obtained from results of irregular shape of product that was successful in production feasibility check module according to flat pattern layout and generate strip layout drawing in graphic forms. The developed system provides its efficiency for flat pattern layout, and strip layout for the irregularly shaped sheet metal products.

• 한국전자통신학회논문지
• /
• 제13권1호
• /
• pp.15-22
• /
• 2018

본 논문에서는 WLAN/WiMAX 시스템에 적용 가능한 모노폴 안테나를 제안하였다. 제안된 안테나는 두 개의 원호와 한 개의 직선 선로로 설계하여 세 개의 전류흐름을 갖도록 구성하여 세 개 대역의 공진특성을 갖도록 설계하였다. 두 개의 원호 길이와 한 개의 직선 선로의 길이를 상호결합을 고려하려 본 논문에서 요구되는 특성을 얻기 위한 최적화 수치를 얻었다. 제안된 안테나는 $23.5mm(W1){\times}32.0mm(L1){\times}1.0mm(t)$의 유전율이 4.4인 RF-4 기판 위에 $21.0mm(W6){\times}31.0mm(L7)$의 크기로 제작되었다. 측정결과로부터, 927 MHz (1.844~2.771 GHz), 926 MHz (3.33~4.256 GHz), 그리고 1,415 MHz (5.13~6.545 GHz)의 대역폭을 얻었다. 또한 요구되는 삼중대역에서 측정된 이득과 방사패턴의 얻었다.