• KIPS Transactions on Software and Data Engineering
• /
• v.2 no.2
• /
• pp.145-150
• /
• 2013

A film colored overlay has been used as an assistive device for dyslexics, Recently, several virtual colored overlays which can be used in computer were developed. But mobile virtual overlay has not been developed yet. In this paper, I implemented a mobile overlay application which is based android operating system and displays a colored overlay of screen all the time while user can freely interact with rest of apps in normal manner by using root window and service. A method is presented to determine the source color of a virtual overlays by estimating alpha value of alpha blending algorithm through measurement of the chromaticity and transmissivity of film overlays and I implemented all colors which are presented by using Intuitive Overlays. Test results of the developed virtual overlay show that all colors of the overlays are almost identical to the colors of Intuitive Overlay by using the chroma meter CS-200A.

• Polymer(Korea)
• /
• v.33 no.1
• /
• pp.91-95
• /
• 2009

We fabricated the electromagnetic (EM) noise absorber films for high temperature use by blending a soft magnetic powder with poly(amide imide) (PAI). The EM noise absorber films of PAI/soft magnet composite were prepared by casting the solution of poly(amide amic acid)/soft magnet powder into glass substrate with casting applicator device and then thermal imidization. The obtained films were fully characterized and their physical properties including thermal behavior, thermal stability and mechanical properties were studied. The EM noise absorption ability was also investigated using micro-strip line method. At 1 GHz, the power loss of composite film with 150 ${\mu}m$ thickness was about 25%.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.10a
• /
• pp.145-149
• /
• 2004

It is necessary for managing a perfect process for degasing aluminum molten metal according to the increase of a grade of aluminum and its alloy products. There are some methods that have been used to manage a degasing process in recent years, such as an injection method that uses aluminum molten metal powder and chemicals supplier and input method that supplies argon and nitrogen, or chlorine gas by using a gas blow-tube. However, these methods show some problems, and it shows that it is a difficult process to handle. pollution due to the producing a lot of toxic gases like chlorine and fluoride gas. irregular effects, and lowering work efficiency due to the excessive processing time. The problems that are the most fatal are the producing a lot of sludge due to the reaction of aluminum molten metal with chemicals. loss of metals, and decreasing the life of refractory materials. In order to solve these problems. this paper develops a technology that is related to aluminum continuous casting molten metal and monolithic degasing apparatus. A degasing apparatus developed in this study improved the exist ing methods and prevented environmental pollution wi th smokeless. odor less, and harmlessness by using a new method that applies argon and nitrogen gas in which the methods used in the West and Japan are eliminated. The developed method can significantly reduce product faults that are caused by the production of gas and oxidation because it uses a preprocessed molten metal with chemicals. In addition. the amount of the produced sludge can also be reduced by 60-80% maximum compared with the existing methods. Then. it makes it possible to minimize the loss of metals. Moreover. the molten metal processing and settling time is also shortened by comparing it with the existing methods that are applied by using chemicals. In addition, it does much to improve the workers' health, safety and environment because there is no pollution. The improvement of productivity and prevent ion effects of disaster from the results of the development can be summarized as follows. It will contribute to the process rationalization because it does not have any unnecessary processes that the molten metal will be moved to an agitator by using a ladle and returned to process for degasing like the existing process due to the monolithic configuration. There are no floating impurities due to the oxidation caused by the contact with the air as same as the existing process. In addition. it can protect the blending of precipitation impurities. Because it has a monolithic configuration. it can avoid the use of additional energy to compensate the temperature decreasing about 60t that is caused by the moving of molten metal. It is not necessary to invest an extra facilities in order to discharge the gas generated from a degasing process by using an agitator. The working environment can be improved by the hospitable air in the factory because the molten metal is almost not exposed in the interior of the area.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.43 no.3 s.309
• /
• pp.67-75
• /
• 2006

Facial expressions exhibit not only facial feature motions, but also subtle changes in illumination and appearance. Since it is difficult to generate realistic facial expressions by using only geometric deformations, detailed features such as textures should also be deformed to achieve more realistic expression. The existing methods such as the expression ratio image have drawbacks, in that detailed changes of complexion by lighting can not be generated properly. In this paper, we propose a nonlinear model for skin color change and a model-based synthesis method for facial expression that can apply realistic expression details under different lighting conditions. The proposed method is composed of the following three steps; automatic extraction of facial features using active appearance model and geometric deformation of expression using warping, generation of facial expression using a model for nonlinear skin color change, and synthesis of original face with generated expression using a blending ratio that is computed by the Euclidean distance transform. Experimental results show that the proposed method generate realistic facial expressions under various lighting conditions.

• Applied Chemistry for Engineering
• /
• v.4 no.4
• /
• pp.760-769
• /
• 1993

Solvent-free low foaming scouring agents(LFSA) were prepared by blending of polyoxyethylene(30) octadecylbenzylammonium chloride(POAC), block copolymer of propylene oxide-ethylene oxide[p(PO-b-EO) glycol], Sedlan FF-200(FF-200) and sulfonic acid-amine condensate of polyoxyethylene(10) nonylphenyl ether(PSAC). In consequence of several tests, FF-200/POAC/p(PO-b-EO) glycol/PSAC/water (20g/10g/5g/5g/60g) mixture (LFSA-5) showed good cleaning power, penetrating ability, emulsifiability and stability to alkali, and gave less problem in water pollution. Scouring effect of LFSA-5 was investigated by the change of percentage of exhaustion before and after scouring at various dyeing temperatures. The percentage of exhaustion of the unscoured PET fabric was 4.5% at $70^{\circ}C$, while that scoured with LFSA-5 was 1.3% at the same temperature, which proved LFSA-5 to be a good scouring agent. Moreover, the foaming power of LFSA-5 measured by Ross and Miles method was 6mm foam height immediately after foaming, and that measured by Ross and Clark method was less than 300mm foam height at $30^{\circ}C$, and 20mm at $80^{\circ}C$. As a result, LFSA-5 proved a good low foaming scouring agent.

• Korean Journal of Clinical Laboratory Science
• /
• v.49 no.3
• /
• pp.256-262
• /
• 2017

Essential oil from herb is known to exert pharmacological effects on the human body. In this study we investigated the antibacterial activity of 4 essential oils (teetree, rosemary, melisa, and lavender), as well as the blended mixture oil of teetree, rosemary, and melisa (TRM) on three bacteria, Staphylococcus aureus, Escherichia coli, and Pseudomonas aeruginosa. Antibacterial analysis was performed using the standard disk diffusion method, and minimum inhibition concentration was determined by the broth microdilution method with different concentrations of essential oils (0.5, 1, 2 and 3 mg/mL). After incubation at $37^{\circ}C$ for 24 h, the antibacterial activity was assessed by measuring the zone of growth inhibition surrounding the disks. Herb oil with the inhibition zones showed varied values ranging from6 to 25 mm. However, the components of herb oil of TRM are as highly active as the teetree oil against pathogens, generating large inhibition zones for both gram negative and positive bacteria (13~22 mm and 8 mm inhibition zones). In the analysis for MIC, TRM showed growth-inhibitory effects at 0.0625% for S. aureus and E. coli, and 1.25% for P. aeruginosa. This result demonstrated that the anti-microbial activity of TRM was greater than a single herb oil, including oxacillin, rosemary, and teetrea. As a single herb oil, both rosemary and teetrea also had an anti-microbial effect by itself, and we can expect that the blended oil mixture may exert a synergistic effect against multidrug resistant bacteria, suggesting its future application in natural preservative agents for health food and cosmetics.

• Journal of Pharmacopuncture
• /
• v.13 no.1
• /
• pp.53-61
• /
• 2010

Purpose : To investigate the effects of the lavender, lemon and eucalyptus oil mixture on the atopy dermatitis skin lesions induced on NC/Nga Mice by dinitrochlorobenzene (DNCB). Material and Method : For this purpose, we fabricated the oil mixture blending three essential oils (lavender, lemon, eucalyptus : ELL) with one carrier oil (jojoba) and apply it on the atopic dermatitis skin lesions of NC/Nga Mice. Atopic dermatitis in NC/Nga Mice was induced by DNCB treatment on the dorsal skin of mice for 8 weeks. The mixture of ratio of each essential oil drop was 1 (eucalyptus) : 2 (lemon) : 2 (lavender) and this mixture was blended with jojoba oil 50ml (0.025%). The ELL-ointment was supplied for 8 weeks. We evaluated the effects of ELL on cell viability of mouse lung fibroblast, clinical skin features and severity, the level of serum Immunoglobulin (Ig) E & Ig G1, Interleukin (IL)-4, IL-13 and Interferon (IFN)-$\gamma$. Results : ELL showed safety on the cell viability of mouse lung fibroblast compared with control group. The cell viability was measured by SRB method. The effects of ELL on clinical skin features and severity in DNCB-induced dermatitis model of NC/Nga mice was significant compared with control group. EEL also showed significant effects on clinical symptom score compared with control group. Serum IgE & IgG1 level and development of atopy dermatitis skin lesions were evaluated. Serum IgE & IgG1 production was significantly down-regulated in EEL group compared with control group. ELL also down-regulated the levels of IL-4 and IL-13, and up-regulated the level of IFN-$\gamma$ compared with control group significantly. Conclusion : ELL was effective on atopy dermatitis by modulating Th2 related factors.

• Journal of ILASS-Korea
• /
• v.19 no.4
• /
• pp.155-166
• /
• 2014

This review will be concentrated on the spray characteristics of bioethanol and its derived fuels such as ethanol-diesel, ethanol-biodiesel in compression ignition (CI) engines. The difficulty in meeting the severe limitations on NOx and PM emissions in CI engines has brought about many methods for the application of ethanol because ethanol diffusion flames in engine produce virtually no soot. The most popular method for the application of ethanol as a fuel in CI engines is the blending of ethanol with diesel. The physical properties of ethanol and its derivatives related to spray characteristics such as viscosity, density and surface tension are discussed. Viscosity and density of e-diesel and e-biodiesel generally are decreased with increase in ethanol content and temperature. More than 22% and 30% of ethanol addition would not satisfied the requirement of viscosity and density in EN 590, respectively. Investigation of neat ethanol sprays in CI engines was conducted by very few researchers. The effect of ambient temperature on liquid phase penetration is a controversial topic due to the opposite result between two studies. More researches are required for the spray characteristics of neat ethanol in CI engines. The ethanol blended fuels in CI engines can be classified into ethanol-diesel blend (e-diesel) and ethanol-biodiesel (e-biodiesel) blend. Even though dodecanol and n-butanol are rarely used, the addition of biodiesel as blend stabilizer is the prevailing method because it has the advantage of increasing the biofuel concentration in diesel fuel. Spray penetration and SMD of e-diesel and e-biodiesel decrease with increase in ethanol concentration, and in ambient pressure. However, spray angle is increased with increase in the ethanol percentage in e-diesel. As the ambient pressure increases, liquid phase penetration was decreased, but spray angle was increased in e-diesel. The increase in ambient temperature showed the slight effect on liquid phase penetration, but spray angle was decreased. A numerical study of micro-explosion concluded that the optimum composition of e-diesel binary mixture for micro-explosion was approximately E50D50, while that of e-biodiesel binary mixture was E30B70 due to the lower volatility of biodiesel. Adding less volatile biodiesel into the ternary mixture of ethanol-biodiesel-diesel can remarkably enhance micro-explosion. Addition of ethanol up to 20% in e-biodiesel showed no effect on spray penetration. However, increase of nozzle orifice diameter results in increase of spray penetration. The more study on liquid phase penetration and SMD in e-diesel and e-biodiesel is required.

• Membrane Journal
• /
• v.30 no.5
• /
• pp.319-325
• /
• 2020

In this study, we developed mixed matrix membranes by blending thermoplastic elastomer, i.e. polystyreneblock-polybutadiene-block-polystyrene (SBS) block copolymer with the synthesized UiO-66 particles for CO₂/N₂ gas separation. To investigate the effect of UiO-66 particles in the SBS matrix, we prepared different mixed matrix membranes (MMMs) by varying the mass ratio of SBS and UiO-66 in the blend. To fabricate well-dispersed UiO-66, the SBS/UiO-66 mixture was sonicated and stirred thoroughly. The physico-chemical properties of prepared membranes were characterized by Fourier transform infrared spectroscopy (FT-IR) and scanning electron microscope (SEM). The gas separation performance was measured by time-lag method. The permeability of the MMMs increased significantly as the content of UiO-66 increased, but the CO₂/N₂ selectivity did not decrease significantly. The membranes containing 20% of UiO-66 particles showed the best performance with the CO₂ permeability and CO₂/N₂ selectivity of 663.8 barrer and 13.3, respectively. This result showed performance closer to upper bound than pure SBS membrane in the Robeson plot, as the added UiO-66 particles did not significantly sacrifice selectivity and more than doubled gas permeability.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.3
• /
• pp.380-389
• /
• 2020

The conversion characteristics and fuel properties for producing biodiesel (BD) by blending beef-tallow, an animal waste resource with a high-saturated fatty acid content, and sunflower-oil, a vegetable oil with a high-unsaturated fatty acid content, were investigated. For this investigation, the effects of the control factors, such as the oil-blend ratio and methanol-to-oil molar ratio, on the fatty acid methyl ester and BD production yield were also investigated. The kinematic viscosity reduction effects of BD using heating and ultrasonic irradiation were verified, and the optimal temperature of each BD-diesel fuel blend for reducing the kinematic viscosity was derived using the correlation equation. As a result, the optimal conditions for producing blended biodiesel were verified to be TASU7 and a methanol-to-oil molar ratio of 10:1. The analysis results of the fuel properties of TASU7 satisfied the BD quality standard; hence, the viability of BD blended with waste tallow as fuel was verified. The experimental results on the kinematic viscosity reduction showed that heating is more effective in reducing the kinematic viscosity because it took less time than ultrasonic irradiation, and the equipment was cheaper and more straightforward than the ultrasonic irradiation method.