• Journal of the Korean Operations Research and Management Science Society
• /
• v.25 no.1
• /
• pp.85-92
• /
• 2000

Channel management is critical in designing a cellular mobile system that offers high capacity and high quality. In this paper, an integrated channel management scheme is proposed, which consists of a dynamic channel allocation scheme and an admission control scheme. The dynamic channel allocation scheme allocates a call request the channel which minimizes the impact on its interfering cell, and consists of two types of channel allocation strategies : nominal channel allocation strategy and non-nominal channel allocation strategy. The admission control scheme named the variable cutoff priority scheme reserves some frequency channels for handoff cells in each cell the number of which varies according to the blocking probability of handoff class in that cell. Computationl tests are performed to evaluate the performance of the proposed scheme in terms of overall blocking probability, defined by the weighted value of the blocking probabilities of new calls and handoff calls. The results show that the proposed scheme yields better performance than other compared schemes.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.7 no.1
• /
• pp.63-72
• /
• 1995

Convective heat transfer in a two-dimensional horizontal and vertical channel with isothermal rectangular beams attached to one adiabatic wall is investigated from the numerical solution of Navier-Stokes and energy equations. The solutions have been obtained for dimensionless beam spacings, S/L=1~4, aspect ratios of beam, H/B=0.25~4, Reynolds numbers, Re=50~1000 and Grashof numbers, $Gr=0{\sim}5{\times}10^4$. The total mean Nusselt number, Nu_T for horizontal and vertical channels shows same value at Gr=0. As Gr increases, Nu_T for horizontal channel increases, but Nu_T for vertical channel shows similar value at S/L=2, H/B=0.25, Re=100. The total mean Nusselt number for horizontal channel is higher than that for vertical channel. As H/B increases, $Nu_T$ for both channel decrease at $Gr=10^4$, Re=100.

• Journal of information and communication convergence engineering
• /
• v.9 no.1
• /
• pp.27-31
• /
• 2011

This paper describes the optimization of spectrum sensing in terms of the throughput of a cognitive radio (CR) system. Dealing with the optimization problem of spectrum sensing, this paper evaluates the throughput of a CR system by considering such situations as the penalty time of a channel search and incumbent user (IU) detection delay caused by a missed detection of an incumbent signal. Also, this paper suggests a serial channel search scheme as the search method for a vacant channel, and derives its mean channel search time by considering the penalty time due to the false alarm of a vacant channel search. The numerical results suggest the optimum sensing time of the channel search process using the derived mean channel search time of a serial channel search in the case of a sensing hardware structure with single radio frequency (RF) path. It also demonstrates that the average throughput is improved by two separate RF paths in spite of the hardware complexity of an RF receiver.

• ETRI Journal
• /
• v.37 no.3
• /
• pp.439-449
• /
• 2015

Human body communication (HBC) is being recognized as a new communication technology for mobile and wearable devices in a body area network (BAN). This paper presents co-channel interference experienced by HBC supporting the physical layer in the IEEE 802.15.6 BAN standard. To analyze the co-channel interference, a co-channel interference model is introduced, and space-domain and time-domain parameters representing an interference environment are generated using the co-channel interference model. A new signal-to-interference ratio (SIR) parameter depending on the peak amplitudes of the data signals causing co-channel interference is defined; co-channel interference can be easily analyzed and modelled using the newly defined SIR. The BER degradation model derived using the co-channel interference model and SIR in this paper can be effectively used to estimate the performance.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.113-114
• /
• 2007

Hole mobility characteristics of single surface channel and dual channel Si/SiGe structure are compared, where the former one consists of a relaxed SiGe buffer layer and a tensile strained Si layer on top, and for dual channel structure a compressively strained SiGe layer is inserted between them. Due to the difference of hole mobility enhancement factors of layers between them, hole mobility characteristics with respect to the Si cap thickness shows the opposite tend. Hole mobility increases with thicker Si cap for single channel structure, whereas it decreases with thicker Si cap for dual channel structure.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.8A
• /
• pp.753-762
• /
• 2002

Blind equalization of transmission channel is important in communication areas and signal processing applications because it does not need training sequences, nor dose it require a priori channel information. In this paper, an adaptive blind MMSE channel equalization technique based on second-order statistics in investigated. We present an adaptive blind MMSE channel equalization using multichannel linear prediction error method for estimating cross-correlation vector. They can be implemented as RLS or LMS algorithms to recursively update the cross-correlation vector. Once cross-correlation vector is available, it can be used for MMSE channel equalization. Unlike many known subspace methods, our proposed algorithms do not require channel order estimation. Therefore, our algorithms are robust to channel order mismatch. Performance of our algorithms and comparisons with existing algorithms are shown for real measured digital microwave channel.

• Journal of Korea Multimedia Society
• /
• v.7 no.6
• /
• pp.781-790
• /
• 2004

This paper presents a fourth-order cumulants based iterative algorithm for blind channel equalization. It is robust with respect to the existence of heavy Gaussian noise in a channel and does not require the minimum phase characteristic of the channel. In this approach, the transmitted signals at the receiver are over-sampled to ensure the channel described by a full-column rank matrix. It changes a single-input/single-output (SISO) finite-impulse response (FIR) channel to a single-input/multi-output (SIMO) channel. Based on the properties of the fourth-order cumulants of the over-sampled channel outputs, the iterative algorithm is derived to estimate the deconvolution matrix which makes the overall transfer matrix transparent, i.e., it can be reduced to the identity matrix by simple reordering and scaling. Both a closed-form and a stochastic version of the proposed algorithm are tested with three-ray multi-path channels in simulation studies, and their performances are compared with a method based on conventional second-order cumulants. Relatively good results are achieved, even when the transmitted symbols are significantly corrupted with Gaussian noise.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.3
• /
• pp.288-295
• /
• 2013

In this paper, we compare the existing channel estimation technique for 4S (Ship to Ship, Ship to Shore) maritime communications under AWGN channel model, Rician fading channel model, and Rayleigh fading channel model respectively. In general, the received signal is corrupted by multipath and ISI (Inter Symbol Interference). The estimation of a time-varying multipath fading channel is a difficult task for the receiver. Its performance can be improved if an appropriate channel estimation filter is used. The simulation is performed in MATLAB. In this simulation, we use the popular estimation algorithms, LMS (Least Mean Square) and RLS (Recursive Least-Squares) are compared with respect to AWGN, Rician and Rayleigh channels.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.54 no.1
• /
• pp.56-60
• /
• 2005

In the power-line communication(PLC) systems, the power line is a wired medium. However, the power line channel has the multi-path fading characteristics like the wireless channel in the wireless communication systems because it has the signal reflection and divergence by the impedance mismatching between many branch lines and loads. So the analysis of the multi-path characteristics is very important, and it has been doing by the several measurement methods for the impulse response between the transmitter and the receiver. PN sequence method has originally been used as a wideband impulse response measurement mettled for wireless channel, but it is recently being applied to not only the wireless channel but also the wired channel like the power line channel. This method is more useful and effective for the long distance communication channel like the medium voltage power distribution line with the multi-paths[1]. In this thesis, we have measured impulse response for the medium voltage power distribution line channel by the wideband measurement method using PN sequence, analytically studied the measured data and presented the results.

• Journal of Distribution Science
• /
• v.18 no.1
• /
• pp.5-13
• /
• 2020

Purpose: The purpose of this study is to examine the growth and change process of Korean cosmetic market that has grown more than three times since 2000. It also examined how the growth and decline of the cosmetics brands are related to the change of the cosmetic distribution structure. Research methodology: This study tried to classify the change of the Korean cosmetics market into four stages based on the market sales information. It analyzed the sales information of Korean cosmetic companies and the relationship with the sales of the brands by distribution channel. Results: One-brand store channel had played a leading role in the market growth, and multi-brand stores have grown and a number of brands also grew through that channel since 2013. Since 2016, multi-brand stores have continued to grow and have dominated the market beyond one-brand store channel. Conclusions: The changes in sales of domestic cosmetics companies have been classified based on the distribution channel type in four stages: the emergence of one-brand store, the growth of one-brand store channel, the growth of multi-brand store channel, and the decline of one-brand store channel. In conclusion, multi-brand store channels have recently grown in the Korean cosmetics market, and this trend is expected to continue.