• 전자공학회논문지 IE
• /
• v.47 no.4
• /
• pp.53-58
• /
• 2010

In this paper we propose symbol decision method reflecting the color non-uniformity in 3-dimensional color space. By comparing with 2-dimensional color space decision method, we show the superiority of BER performance of the proposed method. Proposed method may reflect the non-uniformity since the symbol decision boundary in color space is transformed from 3D RGB space, and one dimension corresponding to Y value is added. Therefore, we can obtain the better BER performance by using the symbol decision method in 3D color space. In this paper, through numerical simulation, show the superior BER performance of 3D color space symbol decision method compared with 2D color space symbol decision method under AWGN and common mode noise channel.

• Journal of the Korean Chemical Society
• /
• v.30 no.1
• /
• pp.3-8
• /
• 1986

The investigation of the effect of solvent structure on the first-order solvolysis of cis-$[Co(en)_2ClNO_2]^+$ion has been extended to water + co-solvent mixtures where the co-solvents are glycerol, ethylene glycol, isopropyl alcohol and t-butyl alcohol. Rates of solvolysis have been evaluated by spectrophotometric method at temperature 25∼30$^{\circ}$C. The polarity of solvent has influence on the variation of rate constant. The non-linear plot of the rate constant in log scale versus $\frac{D-1}{2D+1}$ implies that change in solvent structure with composition plays an important role in determining the variation of rate constant. The linearity of the plot of the rate constant in log scale versus the Grundwald-Winstein Y factor confirms that the solvolysis is an Id-type process with considerable extension of the metal chloride bond in the transition state. In the Kivinen equation the slope of the plot of log k versus $log(H_2O)$ suggests that the solvolysis is also an Id-type process. The application of free energy cycle shows that the effect of solvent structure is greater in the transition state than in the initial state.

• Journal of the Korean Chemical Society
• /
• v.33 no.1
• /
• pp.31-36
• /
• 1989

The second-order rate constants for the nucleophilic substitution reactions of para-substituted benzyl nitrates with para-substituted anilines in acetonitrile were conductometrically determined. Hammett ${\rho}$x and ${\rho}$y values and Bronsted ${\beta}$ values were obtained from these kinetic data. The reactions of Benzyl nitrates with the series of anilines showed linear Hammett plots with negative slopes. For the change of substituents in the benzyl nitrates, nonlinear Hammett plots with a concave upwards curve were obtained. We applied the potential energy surface and the quantum mechanical models in order to examine the transition state variations caused by changes in substituents on the nucleophile and the substrate. The results showed that the reaction was proceeded via the $S_{N}2$-type reaction mechanism in which the extent of bond-formation was greatly changed depending on the property of the substituents in substrate.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.24 no.5
• /
• pp.987-999
• /
• 2014

A PUF is embedded and implemented into a tag or a device, and outputs a noise y with an input of x, based on its own unique physical characteristics. Although x is used multiple times as inputs of PUF, the PUF outputs slightly different noises, ($y_1,{\cdots}y_n$), and also the PUF has tamper-resistance property, hence it has been widely used in cryptographic protocol. In this paper, we study how to design a PUF-based RFID authentication protocol in a secure and an efficient way. Compared with recent schemes, the proposed scheme guarantees both authentication and privacy of backword/forward under the compromise of long-term secrets stored in tag. And also, the most cost and time-consumming procedure, key recovery algorithm used with PUF, has been desgined in the side of RFID reader, not in the tag, and, consequently, gives possibility to minimize costs for implementation and running time.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.277-277
• /
• 2015

본 연구는 퍼클로레이트의 생물학적 환원 과정에 있어서 나이트레이트의 존재가 미생물에게 어떤 영향을 미치는지를 실험을 통해서 알아보고 적절한 모델링 접근을 통하여 나이트레이트의 퍼클로레이트 환원에 대한 저해의 정량적 분석을 위한 요소들을 도출하기 위해 수행되었다. 100mL 합성폐수를 포함하는 플라스크를 이용한 실험이 수행되었고, 유일 탄소원으로 아세트산나트륨이 사용되었고, 전자수용체로는 퍼클로레이트와 나이트레이트가 사용되었다. 먼저 퍼클로레이트와 나이트레이트 각각을 단일전자수용체로서 넣은 실험을 진행하였다. 퍼클로레이트의 동역학계수 qmax, Ks, Y, b값은 각각 0.9(mgClO4-/mgMLSSday), 42.28(mgClO4-/L), 0.382(mgClO4-/mgMLSS), 0.05(day-1)로 계산되었다. 그리고 나이트레이트의 동역학 계수 qmax, Ks, Y, b값은 각각 13.81(mgNO3-/mgMLSSday), 239.78(mgNO3-/L), 0.275(mgNO3-/mgMLSS), 0.05(day-1)로 계산되었다. 나이트레이트와 퍼클로레이트를 동시에 넣었을 경우에는 나이트레이트의 동역학 계수는 qmax, Ks, Y, b 값은 각각 13.72(mgClO4-/mgMLSSday), 235.64(mgClO4-/L), 0.263(mgClO4-/mgMLSS), 0.05(day-1)로 큰차이 없었으나, 퍼클로레이트의 경우에는 qmax, Ks, Y, b값은 각각 0.6(mgClO4-/ mgMLSSday), 42.24(mgClO4-/L), 0.393(mgClO4-/mgMLSS), 0.05(day-1)로 qmax값은 감소하였고, Y값은 증가하는 모습을 보임으로써, 나이트레이트의 존재가 퍼클로레이트의 환원을 저해시키는 것을 확인할 수 있었다.

• Journal of The Geomorphological Association of Korea
• /
• v.20 no.3
• /
• pp.1-14
• /
• 2013

This study aims to investigate the formation and sedimentary environment including formative period, grain composition and climate change from loess-paleosol sequence deposited on a gravel bed of river terrace in the Jincheon Basin, Chungbuk Province. The Jincheon section consists downward of a surface layer, loess-paleosol sequence, transitional layer I, transitional layer II and gravel bed. It can be suggested from the OSL age dating that the sequence was deposited during MIS 6 to 4. The sequence can be divided into four horizons based on the variation in the magnetic susceptibility values. Grain size analysis reveals that the sequence indicates similar properties of grain size to loess deposits in Korea and especially, the Y values in the sequence are lower than those in the loess and paleosol horizons in the Chinese Loess Plateau and similar to those in the Red Clay in the Chinese Loess Plateau and Xiashu loess in the lower reaches of the Yangtze River. These Y values in the sequence can be attributed to the remote source and/or experience of intensive weathering process after deposition in the Korean Peninsula.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.432-432
• /
• 2023

한국건설기술연구원(Korea Institute of Civil Engineering and Building Technology, KICT)의 안동하천연구센터(Andong River Experiment Center, REC)는 다양한 하천 관련 실규모 실험을 수행하기 위해 3개의 수로를 보유하고 있다. 본 연구의 주목적인 실증 실험 계측 결과를 기반으로 3D 게임엔진을 이용하여 물 흐름을 재현하기 위해 A1 수로를 대상구간으로 설정하였다. 실증 실험의 경우 2개의 수문 개도율 조건에서 ADV와 ADCP를 활용하여 계측된 유량 및 유속 결과들을 비교하였으며, 추가적으로 영상 데이터로 부터 표면유속(LS-PIV)을 산정하였다. 3D 게임 엔진은 렌더링 엔진, 물리 엔진, 오디오 엔진, UI 시스템, 게임플레이 프레임워크 등이 잘 융합된 소스코드들과 개발자들이 이용하기 쉬운 방식으로 변환된 툴(tool)로 제공하여 현실 세계를 가상 세계에 시각화하여 구현하는데 큰 장점을 가지고 있다. 또한 기존의 흐름 재현이 가능한 수리/수문 모델링의 경우 특정한 목적으로만 이용가능하고 연산에 소용되는 시간 때문에 실시간 흐름재현이 어렵지만, 3D 게임엔진을 이용하는 경우 다양한 목적과 여러 분야와의 고려가 동시에 가능하며 연산의 단순화를 통해 실시간 흐름 재현이 가능하다는 장점이 있다. 본 연구에서는 언리얼 엔진의 Niagara Fluids와 Fluid flux 툴들을 활용하여 하천실증실험 시설 일부 구간에 대해 물 흐름을 재현하였다. 먼저 하천실험실증시설을 드론과 RTK-GPS를 이용하여 촬영된 결과를 정합하여 3D 게임엔진 기반 흐름 재현을 위한 지형 기초 자료를 구축하였다. 지형 계측 결과를 기반으로 A1 수로 전체 구간을 대상구간으로 설정한 이후 수문 조절을 통해 흐름 조건을 제어할 수 있도록 제작하였으며, 실제 흐름에 대한 계측 결과를 기반으로 재현된 흐름을 대상으로 material 값의 조정(방향 X, Y값을 RGB값으로 변환한 뒤 벡터 길이 값으로 환산)을 통해 0~100 사이 값을 이용하여 유속을 표현하였다. 최근 가상공간 (i.e. 디지털트윈) 관련 시장 성장이 매우 빠르고 다양한 사업에서 해당 기술의 수요가 증가하고 있으며, 본 연구를 통해 물 흐름의 디지털 트윈화를 위한 수단으로서 3D 게임 엔진의 활용 가능성을 확인하였다. 다만 실제 하천의 적용과 하천관리를 위한 실용화를 위해서는 추가적인 연구와 분석이 이루어져야 할 것이다.

• Journal of the Korean Chemical Society
• /
• v.38 no.12
• /
• pp.873-879
• /
• 1994

A series of samples of solid solutions in the $Sr_xEu_{1-x}FeO_{3-y}(0.00{\leq}x{\leq}1.00)$ system has been prepared at $1200^{\circ}C$ under an atmospheric air pressure. The structures of solid solutions are studied by X-ray diffraction, thermal, Mohr salt, and Mossbauer spectroscopic analyses. Their physical properties are also discussed with the electrical conductivities. X-ray diffraction data for the compositions of x = 0.00, 0.25, and 1.00 are assigned to the orthorhombic and the compositions of x = 0.50 and 0.75 to the cubic systems. The lattice volume reduced to cubic cell increases with the x value. The mole ratio of $Fe^{4+}$ iometric chemical formulas of the system are formulated from the x, $\tau$, and y values. The mixed valency state of Fe ions, the oxygen coordination, and covalent bond character are discussed with the Mossbauer spectroscopic data. The activation enegy of the electrical conductivities depends on the $\tau$ value in the temperature range of -$100^{\circ}C$ to $600\circC$ under the air pressure. The Mossbauer spectrum and electrical conductivity of the solid solutions are discussed with nonstoichiometric chemical compositions.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.19 no.2
• /
• pp.61-65
• /
• 2009

In this paper, we report on the growth and optical characteristics of white-LED without fluorescent material. The growth of DH(double heterostructure) with AlGaN active layer was performed on a n-GaN/(0001) $Al_{2}O_{3}$ by the mixed-source HVPE and multi-sliding boat. The CRI(color rendering index) of packaging device charged in the range 72-93 with CIE chromaticity coordinates(x=$0.26{\sim}0.34$, y=$0.31{\sim}0.40$). And CCT(correlated color temperature) values was measured $5126{\sim}10406K$ with increasing injection current. The CIE point of conventional phosphor white LED shifts blue region, but cm point of non-phosphor white LED shifts opposite direction. These results show the mixed-source HVPE can be possible to newly fabricate method of phosphor free white LED with high CRI value.

• Journal of Dairy Science and Biotechnology
• /
• v.35 no.1
• /
• pp.39-45
• /
• 2017

The market for lactose-hydrolyzed milk is growing due to an increased awareness of lactose intolerance, and increased market interest for modified milk with health claims. The aim of this study was to compare the quality characteristics of 2% lactose-hydrolyzed milk with its lactose hydrolysis rate, with the goal of applying the method to dairy product monitoring in the future. We observed that the freezing point of milk significantly decreased with increasing lactose hydrolysis rate. A linear relationship was found between lactose concentration and freezing point, following the equation (y=-50.416x + 767.91). However, no significant changes were observed in other physicochemical properties of the milk (pH, titratable acidity, total solids and color) (p<0.05). In conclusion, we could predict the residual lactose content quickly and easily in 2% low fat milk by measuring its freezing point. This could represent an easy means for assessing the lactose hydrolysis rate of dairy products.