• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1480-1484
• /
• 2003

This paper presents the design and development of network for housing estate security system. The system can cover up to 961 houses which can be up to 1,200 meters long transfer rate of 9,600 bps. This system uses checking and warning the abnormal situation. More over this system has ability to control switch on/off the electrical equipment in the house via AC line control system. The system consists of 4 parts. The first part is a security system of each house using MCS-51 microcontroller as a central processing unit scan 32 sensors and control 8 appliances and send alarm. The MCS-51 microcontroller received control signal via telephone used DTMF circuit. The second part is distributed two levels master/slave network implementing after RS-485 serial communication standard. The protocol its base on the OSI (Open Systems Interconnection) 7 layers protocol model design focus on speed, reliability and security of data that is transferred. The network security using encrypt by DES algorithm, message sequence, time stamp checking and authentication system when user to access and when connect new device to this system. Flow control in system is Poll/Select and Stop-and-Wait method. The third part is central server that using microcomputer which its main function are storing event data into database and can check history event. The final part is internet system which users can access their own homes via the Internet. This web service is based on a combination of SOAP, HTTP and TCP/IP protocols. Messages are exchanged using XML format [6]. In order to save the number of IP address, the system uses 1 IP address for the whole village in which all homes and appliance in this village are addressed using internal identification numbers. This proposed system gives the data transfer accuracy over 99.8% and maximum polling time is 1,120 ms.

• Korean Journal of Computational Design and Engineering
• /
• v.11 no.1
• /
• pp.49-56
• /
• 2006

In this study, the modeling support system was developed which can make easy and fast FE-modeling and verify the results of static and durability analysis for the lower arm, one of the important parts in automobile suspension module. It took into account of the whole complicated design processes verifying the durability coefficients evaluated by fatigue analysis, which should be used to satisfy a design criteria. To guide the FE-modeling the drive page was constructed by using HTML and XML, which was based on expert's know-hows. It is able to integrate the processes to design the lower arm in practice, so that the standardization of its FE-Modeling is achieved, consequently. The 3 dimensional CAD's geometrical data were changed automatically into pre-defined shell elements under the concept of mesh-offset technique, and then welding elements were treated to connect between target and basic surfaces constructed by the shell elements. This system has also a user interface to control boundary and load ing conditions applied in performing of the static and durability analysis, in which many load cases can be applied simply with the MPCs driven by just few mouse clicks. These were implemented on the platform of MSC.Patran and utilized ANSYS, MSC.Nastran and MSC.Fatigue as the solver of the analysis performed. The developed system brings not only significant decreasing of man-hours required in FE-modeling process, but also obtaining of satisfied qualities in analyzed results. It will be integrated in a part of virtual prototyping module of the developing e-engineering framework.

• Korean Journal of Computational Design and Engineering
• /
• v.21 no.1
• /
• pp.78-89
• /
• 2016

When a plant owner requests plant 3D CAD models in the format that a shipbuilding company does not use, the shipyard manually re-models plant 3D CAD models according to the owner's requirement. Therefore, it is important to develop a technology to compare the re-modeled plant 3D CAD models with original ones and to quantitatively evaluate similarity between two models. In the previous study, we developed a graphic user interface (GUI)-based comparison system where a user evaluates similarity between original and re-modeled plant 3D CAD models for piping design at the level of unit. However, an offshore plant consists of thousands of units and thus a system which compares several plant 3D CAD models at unit-level without human intervention is necessary. For this, we developed a new batch model comparison system which automatically evaluates similarity of several unit-level plant 3D CAD models using an extensible markup language (XML) file storing file location and name data about a set of plant 3D CAD models. This paper suggests system configuration of a batch-mode-based comparison system and discusses its core functions. For the verification of the developed system, comparison experiments for offshore plant 3D piping CAD models using the system were performed. From the experiments, we confirmed that similarities for several plant 3D CAD models at unit-level were evaluated without human intervention.

• The Journal of Society for e-Business Studies
• /
• v.8 no.3
• /
• pp.87-105
• /
• 2003

Business Process Management (BPM) is an emerging trend of managing business process life cycles and integrating heterogeneous systems . Recently, BPM is considered as an essential element for automation of complex business processes involving many companies, particularly for those in an e-Business environment. In such an environment, it is very important for each business partner to trace history of resources. However, it has been a difficult problem for Workflow Management Systems(WFMSs) to support management of resource changes because of limited storage, complex process structure, and absence of formal change model. In this paper. a new framework is proposed, which can support change management for documents, one of core resources of business process. Under a traditional WFMSs framework, all workflow components belong to either build-time or run-time function, and executions of workflow processes are performed by the two functions . To manage changes of documents while process executing. a new framework with additional component modules are required. A version control method is introduced for the purpose of managing document changes. The proposed method includes five models for document structure, process structure, association between process and document, version management, and efficient version storage. A prototype system is developed to demonstrate the effectiveness of the proposed models.

• Journal of Broadcast Engineering
• /
• v.22 no.5
• /
• pp.560-569
• /
• 2017

Recently as the studies on the combined delivery over multiple transmission media are progressed, studies using MMT which is next-generation multimedia transport standard are underway. They are about transmitting video data layered by SHVC through broadcasting network and communication network based on MMT. However, it is difficult to serve synchronized UHD contents in heterogeneous network environment based on MMT, because MMT standard doesn't fully specify the information to indicate the relationship between media. Also, the service that we want to propose in this paper is a broadcasting-based service such as terrestrial broadcasting. Therefore the user must be able to watch various contents continuously. However, the MMT PI(Presentation Information) that controls the spatio-temporal layout of a content has been described as providing only one content. In this paper, we propose the structure of MXD document and MMT PI to provide continuous UHD contents service based on heterogeneous network.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.11 no.1
• /
• pp.21-27
• /
• 2017

To guarantee the effectiveness of the HACCP(Hazard analysis and critical control points) system, it is necessary to develop of an ontology-based information system that can automatically manage the large amount of HACCP records or information derived from the HACCP operation results. In this paper, we construct a food information ontology which represents the relationships between ingredients, recipe, and features of food categories. Moreover, we develop HACCP automation application adopt the ontology to verify the semantic quality of the designed ontology model by performing HACCP processes such as HACCP diet classification. We expect to contribute to develop a food hygiene information and improve the accuracy of the HACCP data through the semantic system.

• Journal of Korea Spatial Information System Society
• /
• v.7 no.1 s.13
• /
• pp.39-52
• /
• 2005

GML (Geography Markup Language) has become the widely adopted standard for transport and storage of geographic information. So, various researches such as modeling, storage, query, and etc have been studied to provide the interoperability of geographic information in web environments. Especially, there are increased needs to store semi-structured data such as GML documents efficiently. Therefore, in this paper, we design and implement a GML repository to store GML documents on the basis of GML schema using spatial database system. GML Schema is converted into directed GML schema graph and the schema mapping technique from directed schema graph to spatial schema is presented. Also, we define the conversion rules on spatial schema to preserve the constraints of GML schema. GML repository using spatial database system is useful to provide the interoperability of geographic information and to store and manage enormous GML documents.

• Journal of radiological science and technology
• /
• v.30 no.1
• /
• pp.47-51
• /
• 2007

Development of hospital information system and Picture Archiving Communication System is not new in the medical field, and the development of internet and information technology are also universal. In the course of such development, however, it is hard to share medical information without a refined standard format. Especially in the department of radiology, the role of PACS has become very important in interchanging information with other disparate hospital information systems. A specific system needs to be developed that radiological reports are archived into a database efficiently. This includes sharing of medical images. A model is suggested in this study in which an internal system is developed where radiologists store necessary images and transmit them in the standard international clinical format, Clinical Document Architecture, and share the information with hospitals. CDA document generator was made to generate a new file format and separate the existing storage system from the new system. This was to ensure the access to required data in XML documents. The model presented in this study added a process where crucial images in reading are inserted in the CDA radiological report generator. Therefore, this study suggests a storage and transmission model for CDA documents, which is different from the existing DICOM SR. Radiological reports could be better shared, when the application function for inserting images and the analysis of standard clinical terms are completed.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2003.09a
• /
• pp.66-66
• /
• 2003

목적 : 선량측정의 정확성을 향상시키기 위하여 물 흡수선량 표준에 토대를 두고 있는 표준측정법, AAPM TG-51과 IAEA TRS-398, 이 발표되어 선량측정의 파라다임이 변화하고 있다. 본 연구에서는 이들 대표적인 표준측정법에 대하여 사용자 편의성을 고려하여 웹에 기반한 선량교정 프로그램을 개발하고자 한다. 대상 및 방법 : 미국의학물리학회 AAPM TG-51과 국제원자력기구 IAEA TRS-398 표준측정법에 선량교정 프로그램은 Microsoft IIS 6.0 웹서버와 .NET 플렛폼상에서 Visual Studio. NET 도구를 사용하여 개발하였다. 개발언어로는 C# 언어를 사용하였고 각 표준측정법에 대한 선량교정 작업서는 ASP. NET 페이지로 작성하였다. 웹페이지와 산량 교정 모듈을 분리하여서 개발 후 유지보수가 쉽게 설계하였다. 또한 기준점에서의 선량 계상에 사용하는 모든 물리적인 파라미터와 데이터는 데이터베이스에 저장하였다. 이로써 향후 수식체계의 변화 또는 물리적인 데이터의 변화로 인한 프로그램 수정이 최소화하도록 하였다. 결과 : 이들 표준측정법은 모두 물 흡수선량 교정인수에 토대를 두고 있으나 측정 조건 및 물리적인 자료 에 있어 약간의 차이를 보이고 있다. 그러므로 각 표준측정법간의 유사점 및 차이점을 비교 분석하기가 용이하였다. 그리고 개발된 프로그램을 이용하여 표준측정법에서 제시된 선량교정 작업서에 따라 선량 교정을 수행한 교정 결과 데이터를 XML 파일 형식으로 저장하여 이전의 측정 자료를 관리할 수 있게 하였다. 이 과거 측정 자료를 사용하여 출력 선량 교정의 변화 및 기타 중요한 물리적인 데이터 값의 변화를 분석할 수 있다. 결론 : 두 표준측정법에 대한 선량교정 프로그램은 사용자가 선호하는 표준측정법을 선택할 수 있고, 웹에 토대를 두고 있어 프로그램으로 전국 방사선종양학과의 방사선치료기기의 출력 및 물리적인 변화에 대한 자료를 비교 분석하기 용이하고 수작업으로 인해 발생할 수 있는 실수 및 오차를 줄일 수 있다. 또한 개발된 프로그램의 활용을 통하여 국내 실정에 적합한 물 흡수선량 표준에 기반한 표준측정법 개발에 토대를 마련하는데 있어 기여할 것으로 사료된다.

• Journal of Internet Computing and Services
• /
• v.11 no.6
• /
• pp.145-157
• /
• 2010

In this paper, we describe the design details and their implementation of a workflow model (or business process model) analysis system to be used for enhancing resource allocation efficiency and operational performance of enterprise workflows. In other word, the analysis works, proposed in this paper, on XPDL-based workflow models aim to verify the static aspects of the workflow models. Also, the system implemented in the paper is able to not only analyze structural patterns and resource allocation plans' efficiency of enterprise workflows modeled by the XPDL process definition language developed by the international standardization organization, WfMC, but also provide various forms of analytical reports. Conclusively, we strongly believe that the workflow analysis system developed in the paper enables workflow modelers to not only analyze and scrutinize structural patterns of their workflow models but also estimate their process resources assigning and planning measurements in order to improve accuracy, reliability and efficiency of enterprise workflows.