• 제목/요약/키워드: Xenon Lamp

검색결과 112건 처리시간 0.03초

FFL(Flat Fluorescent Lamp)의 방전 특정 (Discharge characteristics of Flat Fluorescent Lamp)

  • 권순석;류장렬
    • 전자공학회논문지 IE
    • /
    • 제44권1호
    • /
    • pp.1-5
    • /
    • 2007
  • 본 논문에서는 FFL에 대한 기초 방전특성의 일부분으로 인가전압을 정현파와 구형파로 변화시켜 V-Q Lissjous 도형을 이용하여 FFL의 방전형태를 분석하고, 인가전압의 듀티비(duty ratio)의 면화에 의한 radiation transition에 대하여 고찰하였다. FFL을 정현파와 펄스파을 이용하였고, 절연층으로 둘러 쌓여 있는 전극을 갖는 FFL의 방전 특성을 V-Q 리사쥬 도형을 이용하여 방전 특성을 고찰하였다. FFL은 펄스파로 구동하였을 때 방전 전류는 전압의 상승 순간에 방전 전류가 흐른다. 듀티비가 증가하면 준안정 준위의 Xe 원자들은 증가하며 172nm의 자외선 방사량이 증가하고 있음을 확인할 수 있었다.

광역학적 암진단을 위한 여기 광원장치의 개발 (Development of Excitation Light Source for Photodynamic Diagnosis of Cancer)

  • 임현수
    • 전자공학회논문지SC
    • /
    • 제44권6호
    • /
    • pp.49-56
    • /
    • 2007
  • 본 논문은 광역학적 암 진단에서 여기광원(excitation light)으로 사용되는 광원장치의 개발에 관한 연구이다. 여기광원의 파장 대 선택은 광과민제의 선택에 따라 형광발생과 상관관계를 가지게 된다. 따라서 본 연구에서는 다양한 광 과민제(photosensitizer)를 이용한 광역학적 암 진단이 가능하도록, 여러 파장 대 광(multi-wavelength)의 선택과 안정적으로 출력할 수 있는 광원장치를 설계하고 개발하였다. 개발된 광원장치는 제논램프(Xenon lamp)를 이용 하였으며, iris를 통한 광 출력제어와 여러 가지 파장대의 필터로 구성된 필터 휠(filter wheel)을 고안하고, 파장 대는 380-420nm 430-480nm, 480-560nm의 파장 대를 출력할 수 있도록 제작하였으며, 광 전달 효율을 높일 수 있도록 광원 전송부도 고안하였다. 개발된 광원장치는 한국식약청의 허가 기준에 맞추어 성능을 평가하였으며, 광 출력과 파장대의 특성을 조사하고 안정성을 검증하였다.

제논 플래시 램프 사용 시 조사 영역 균일도 개선을 위한 반사경 설계 (Reflector Design to Improve the Uniformity of an Irradiated Area Using a Xenon Flash Lamp)

  • 김서영;이한율;전원균;강동화;조예지;정미숙
    • 한국광학회지
    • /
    • 제30권5호
    • /
    • pp.197-203
    • /
    • 2019
  • 본 논문은 광 소결 공정에 쓰이는 제논 플래시 램프 사용 시 조도 균일도를 개선시킬 수 있는 반사경 설계에 대한 연구를 진행하였다. 조사 영역에서 기판의 완전한 소결이 이루어지기 위해서 광효율과 조도 균일도를 목표 성능으로 설정하였다. 기존의 타원 반사경 또는 포물 반사경을 이용한 방식은 광효율을 만족하기 용이하지만 조도 균일도를 만족하는데 어려움이 있다. 따라서 본 논문에서는 조도 균일도를 만족시키기 위해 포물경의 중앙부에 쌍오목 형상을 추가하였다. 이러한 쌍오목 형태의 중앙부 형상을 갖는 포물 반사경의 조도 균일도가 기존의 반사경에 비해 향상됨을 확인하였다.

녹색발광 Zn2SiO4:Mn2+ 형광체가 코팅된 엑시머 램프의 제작 및 특성 (Fabrication and Property of Excimer Lamp Coated with Green-emitting Zn2SiO4:Mn2+ Phosphor Film)

  • 강부식;정현지;정용석;손세모;김종수
    • 반도체디스플레이기술학회지
    • /
    • 제21권4호
    • /
    • pp.106-109
    • /
    • 2022
  • The green-emitting Zn2SiO4:Mn2+ phosphor film was evaluated in a xenon excimer lamp. The phosphor film with 2 ㎛ thick was formed of monolithic structure on the inner side of quartz through a long-time annealing process of coated ZnO solution doped with Mn2+ ion and SiO2 of quartz tube. The coated quartz was filled with 100 torr of xenon gas, and simultaneously both sides was melt and sealed. The xenon-field quartz tube was discharge by applying the voltage of 15 kV with a frequency of 26 kHz, and emitted the glow with dominant peak at 172 nm. The vacuum ultraviolet excited the inner-side coated Zn2SiO4:Mn2+ phosphor film, which emitted the pure and strong green light.

도파된 UV 빛에 의한 광섬유 단면의 폴리머 팁 제작 (Fabrication of polymer tip on an optical fiber end-face by guided UV light)

  • 박민규;정호중;오경환
    • 한국광학회:학술대회논문집
    • /
    • 한국광학회 2009년도 동계학술발표회 논문집
    • /
    • pp.147-148
    • /
    • 2009
  • We have fabricated a down tapered polymer tip on optical fiber end-face by a guided UV light. One side of fiber was aligned with a mercury-xenon lamp and another was put into UV curable polymer. A shape of tip was controlled by adjusting an irradiance of lamp and time of exposure. A bending effect also affects the result. Optical characteristic was achieved preliminarily with solution of minute particles.

  • PDF

Pulse Density Modulated ZVS High Frequency Inverter with Reverse Blocking Single Switch for Dielectric Barrier Discharge Lamp Dimming

  • Sugimura Hisayuki;Yasui Kenji;Omori Hideki;Lee Hyun-Woo;Nakaoka Mutsuo
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2006년도 전력전자학술대회 논문집
    • /
    • pp.206-209
    • /
    • 2006
  • At present, the cold cathode fluorescent lamp (CCFL) using mercury lamp has been generally used far liquid crystal backlight source of personal computer and car navigation and so on. This kind of lamp is more excellent on luminance performance and cost. However, the requirements of liquid crystal backlight due to a light source without mercury have been strongly increased from a viewpoint of the actual influence on environmental preservation and environmental recycling. As fluorescent lamp without mercury, Dielectric Barrier Discharge based rare gas fluorescent lamp (DBD-FL) using xenon (Xe) gas has been studied so far. This DBD lamp has no influence on the human body and environmental recycle. Its operating life is long because electrode is out. In this paper, the simulation and experimental results of soft switching high frequency inverter with reverse blocking single switch as a high frequency power supply circuit for DBD-FL using Xe gas are comparatively evaluated and discussed from a practical point of view.

  • PDF

ICP 제논 램프의 가스 압력과 공급 전력에 따른 광학적 특성연구 (The study of optical properties by gas pressure and applied power in ICP Xe lamp)

  • 최기승;이종찬;최용성;박대희
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2005년도 추계학술대회 논문집 전기물성,응용부문
    • /
    • pp.119-121
    • /
    • 2005
  • The problem of lamp life have being solved before electrode-less lamps were developed. But, mercury is using till now. So people are concerned about friendly-environmental lamp, and many researcher hardly study it. In this paper, an ICP lamp which is using Xe gas and Ne gas was designed after optical properties were measured and analyzed. As a result, H-mode properties and penning effect properties were known. Also xenon and neon of properties analyze by spectrum.

  • PDF

레이저 흡수 분광법을 이용한 He-Ne-Xe 상종가스의 외부전곡 램프의 $1s_4$ 공명준위와 $1s_5$ 준안정준위의 제논 원자 밀도에 대한 연구 (Laser absorption spectroscopy of ternary gas mixture of He-Ne-Xe in External Electrode Fluorescent Lamp (EEFL))

  • 정세훈;오필용;이준호;조광섭;최은하
    • 한국진공학회지
    • /
    • 제15권6호
    • /
    • pp.576-580
    • /
    • 2006
  • 본 논문에서는 수은 램프를 대체하기 위하여 제논 기체를 사용한 무수은 램프를 제작하여 제논 여기종 밀도에 대한 연구를 진행하였다. 진공자외선을 방사할 수 있는 $1s_4$ 공명준위의 제논 원자 밀도와 $1s_5$ 준안정준위의 제논 원자 밀도를 레이저 흡수 분광법을 사용하여 다양한 기체조건 및 방전전류에 따라서 측정하였다. 우리는 주어진 압력에서 방전전류에 따른 $1s_4$ 공명준위의 제논 원자 밀도와 $1s_5$ 준안정준위의 제논 원자 밀도를 측정하였으며 이러한 기본적인 방전 특성의 이해는 EEFL뿐만 아니라 플라스마 디스플레이에서도 발광 효율을 높이는데 매우 큰 기여를 할 것이다.

Development portable hair removal applies PET ($Pause^{10-90}$ and $Energy^{20-40}$ $Trigger^{1-7}$) function

  • Kim, Whi-Young
    • Journal of information and communication convergence engineering
    • /
    • 제7권2호
    • /
    • pp.223-230
    • /
    • 2009
  • For pulse trigger way and the energy injection rate according to PET ($Pause^{10-90}$ $Energy^{20-40}$ $Trigger^{1-7}$) function, indeed, human body condition, period of dormancy in this research about this back correctly adjustment possible and designed harmless micro carrying along style hair exclusion so that can design and manufacture and run special quality examination and Xenon flash lamp to crawl in human body. Because creating individual's skin model to do stable treatment by light transmission way by skin impedance and measure, must embody treatment special quality of most suitable that draw skin color, energy, wave length, approximately, transmission time, pulse delay etc. and want. Specially, saved standard of war treatment pulse modeling by skin impedance, and manufacture pulse modeling system of most suitable by skin subordinate, and embody suitable treatment pulse. Specially, embody as could do root of a hair exclusion being emitted in pulse form using multi wave length of 560nm, 590nm, 640nm, 755nm and embodied clinical data. If become research repletion furthermore little more, is seen that can approximate in commercialization.