• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 춘계학술대회 논문집
• /
• pp.355-356
• /
• 2007

• 한국정밀공학회지
• /
• 제23권6호
• /
• pp.96-103
• /
• 2006

To establish of standard technique of nano-length measurement in 2D plane, new AFM system has been designed. In the long range (about several tens of ${\mu}m$), measurement uncertainty is dominantly affected by the Abbe error of XY scanning stage. No linear stage is perfectly straight; in other words, every scanning stage is subject to tilting, pitch and yaw motion. In this paper, an AFM system with minimum offset of XY sensing is designed. And XY scanning stage is designed to minimize rotation angle because Abbe errors occur through the multiply of offset and rotation angle. To minimize the rotation angle optimal design has performed by maximizing the stiffness ratio of motion direction to the parasitic motion direction of each stage. This paper describes the design scheme of full AFM system, especially about XY stage. Full range of fabricated XY scanner is $100{\mu}m\times100{\mu}m$. And tilting, pitch and yaw motion are measured by autocollimator to evaluate the performance of XY stage. As a result, XY scanner can have good performance. Using this AFM system, 3um pitch specimen was measured. The uncertainty of total system has been evaluated. X and Y direction performance is different. X-direction measuring performance is better. So to evaluate only ID pitch length, X-direction scanning is preferable. Its expanded uncertainty(k=2) is $\sqrt{(3.96)^2+(4.10\times10^{-5}{\times}p)^2}$ measured length in nm.

• 한국산학기술학회논문지
• /
• 제21권11호
• /
• pp.554-560
• /
• 2020

평판 디스플레이 제조 공정에서 대상물의 위치 결정을 위해 고정밀 평면 모션 스테이지를 사용한다. 이 유형의 스테이지는 일반적으로 마찰이 없는 선형 모터와 에어 베어링을 사용하며, 고정밀 위치 센서로 레이저 간섭계를 사용한다. 스테이지의 불가피한 기생 운동에 의해 야기되는 요 모션 오차는 위치 결정 대상체의 향 변화를 의미하므로, 스테이지의 성능과 공정 정밀도 향상을 위해 요 모션 오차의 실시간 동적 보정은 매우 중요하다. 요 모션 오차 보상에는 갠트리 제어가 일반적이며, 이 방법을 공기베어링 가이드를 사용하는 스테이지에 적용하기 위해서 회전 모션을 허용하는 유연기구가 스테이지에 적용된다. 본 논문은 공기베어링과 유연기구를 갖춘 H형 XY 스테이지의 정속 구동 성능을 개선하는 방법을 제안한다. 유연기구를 포함한 스테이지의 갠트리 제어 시 선형 모터로부터 발생하는 상호 리플의 발생 원인을 분석하고, 이러한 상호 리플을 보상하는 방안으로 적응 학습 제어를 제시한다. 제시 방안의 검증을 위해 시뮬레이션을 수행하여, 보상 제어를 통해 속도 리플이 약 22 % 수준으로 감소함을 확인하였다. 그리고 요 모션 오차가 발생하는 스테이지 상태를 가정하여 리플 저감 효과를 검증하였다.

• 한국소음진동공학회논문집
• /
• 제21권9호
• /
• pp.858-867
• /
• 2011

As applying an active control technique to a pneumatic vibration isolation system, the settling time for the payload excitation could be remarkably reduced as well as the improvement of isolation performance for the ground vibration. Some previous researches were dealt with the settling time through the simulation or experiment but, the discussion on the simulation or experimental results including moving parts, such as a XY-stage, on the isolation table rarely exists. As considering the moving part, the dynamic model could be time varying system and in such a case the force imposed on pneumatic vibration isolation table could be described by inertial forces of moving parts according to Newton's 3rd law, the action and reaction law. In this paper, the simulation procedure of the 3-DOF active pneumatic vibration isolation system including moving parts by TDC(time delay control) technique is proposed and the effectiveness through simulation results are also shown.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 추계학술대회 논문요약집
• /
• pp.108-108
• /
• 2003

• 한국결정학회:학술대회논문집
• /
• 한국결정학회 2002년도 정기총회 및 추계학술연구발표회
• /
• pp.36-36
• /
• 2002

To Establish of standard technique of length measurent in 2D plane, we develope AFM system. The XY scanner scans the sample only in XY plane, while the Z scanner scans the specimen only in Z-direction. Cantilever tip is controlled to has constant height relative to speciman surface by feedback of PSPD signal. To acquire high accuracy, Z-axis measuring sensor will be added.(COXI or others). In this paper we design XYZ stage suitable for this AEM system. For XY stage, single module parallel-kinnematic flexure stage is used which has high orthogonality and minimum out-of-plane motion. To obtain best performance optimal design is performed. For XY stage, to be robust about parasitic motion optimal design of maximizing Z and tilt stiffness is performed under the constraint of motion range and stage size. And for Z stage, optimal design of maximizing 1st resonant frequency is performed. Because if resonant frequency is get higher, scan speed is improved. So it makes reduce the error by sensor drift. Resultly XYZ stage each have 1st natural frequency of 115㎐, 201㎐, 2.66㎑ and range 109㎛, 110㎛, 12㎛.

• 대한기계학회논문집A
• /
• 제34권10호
• /
• pp.1537-1541
• /
• 2010

전자 인쇄 분야에 활용이 가능한 잉크젯 프린팅 시스템을 개발하였다. 목표한 위치에 정확하게 이미지를 패터닝 하기 위한 프린팅 시스템의 하드웨어 및 소프트웨어를 개발 하였다. 이를 위하여 패턴 카메라와 선택된 노즐 간의 거리를 구할 수 있는 소프트웨어 알고리즘을 개발하였다. 또한 AutoCAD 의 dxf 파일을 이용하여 XY 스테이지를 동시에 움직여서 프린팅할 수 있는 벡터 프린팅 방법을 개발하였다. 또 다른 프린팅 방법으로 비트맵 이미지를 이용하여 복잡한 이미지를 출력할 수 있는 래스터 프린팅 방법을 개발하였고, CAD 를 이용한 래스터 프린팅 방법과 그 때 생기는 기술적인 문제들을 기술하였다.

• 한국정밀공학회지
• /
• 제30권12호
• /
• pp.1281-1286
• /
• 2013

In this paper, a miniaturized stage with two prismatic-prismatic joints (2-PP) type parallel compliant mechanism driven by piezo actuators is proposed. This stage consists of two layers which are a motion guide layer and an actuation layer. The motion guide layer has 2-PP type parallel compliant mechanism to guide two translational motions, whereas the actuation layer has two leverage type amplification mechanisms and two piezo actuators to generate forces. Since the volume of the stage is too small to mount displacement sensors, the piezo actuators embedding strain gauge sensors are chosen. With the strain gauge-embedded piezo actuators, a semi-control is implemented, which results in hysteresis compensation of the stage. As the results, the operating range of $30{\mu}m$, the resolution of 20 nm, and the bandwidth of 400 Hz in each axis were obtained in the experiments.

• 전기학회논문지
• /
• 제60권1호
• /
• pp.63-70
• /
• 2011

This paper presents the design and operating characteristics of the novel cylindrical linear motor which is designed for the long stroke XY stage. In the long stroke structure, the air gap is changed by the distortion and bending effects, and it makes additional position error in the XY stage. In order to consider the distortion and bending effects of the long stroke, the field part of the cylindrical linear motor is designed as an open structure, and the stroke is supported by the bridge guide which is positioned in the open field part. The mechanical bridge guide can reduce the bending effects of the stroke and can keep a constant air gap. The detailed design process of the proposed cylindrical linear motor is presented in this paper. The proposed motor is analyzed by the 3D FEM technology. The practical XY stage which uses the proposed motor is tested to verify the propose novel cylindrical linear motor. The FEM and experimental results show the effectiveness of the proposed motor.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2005년도 춘계학술대회 논문집
• /
• pp.468-472
• /
• 2005

In this paper, the static and dynamic stiffness of the air bearing stage for micro-micro machine tool are examined experimentally. For stiffness and precision concerns, air bearing stages are adapted for 3-axis micro-milling machine which is size of $200x200\;mm^2$. The air bearings in the stage are preloaded by permanent magnets to achieve desired bearing clearance and stiffness for vertical direction. As the stiffness of the air bearing is primary interests, static stiffness test were performed on XY stage in Z direction and Z column in Y direction. Dynamic test were performed on XY stage and Z column, respectively. Both static and dynamic tests were performed in different air pressure conditions. The vertical stiffness of XY stage is about 9 N/ pm where Y stiffness of Z column is much smaller as $1\;N/{\mu}m$ because of the large moment generated by Y force on the column.