• Journal of Magnetics
• /
• 제21권1호
• /
• pp.29-34
• /
• 2016

Nd-doped $BiFeO_3$ materials were synthesized via a sol-gel method. The crystal structure, magnetic properties, and complex impedance spectroscopy of multiferroic $Bi_{1-x}Nd_xFeO_3$ (BNFO) materials were investigated by X-ray diffraction (XRD), Raman scattering, vibrating sample magnetometer (VSM), and complex impedance spectroscopy. Our results show that the lattice crystal constants (a, c) and the ratio c/a of BNFO materials decreased with increasing Nd concentration. All samples exhibited weak ferromagnetism at room temperature, and the magnetization of samples was enhanced by the presence of $Nd^{3+}$ ions. There was an enhancement in the spontaneous magnetization of BFO with increasing Nd concentration, which is attributable to the collapse of the spin cycloid structure.

• 분석과학
• /
• 제27권6호
• /
• pp.300-307
• /
• 2014

동물뼈의 속성작용 정도에 따른 화학적 평가 기준을 적용하기 위하여 고고유적지에서 출토된 3종의 동물뼈와 현대 동물뼈 1종을 대상으로 FTIR-ATR과 XRD 분석을 실시하였다. FTIR-ATR 분석을 통해 결정화지수(CI)와 탄산염과 인산염의 비(C/P), 탄산염과 탄산염의 비(C/C)를 비교한 결과 동물뼈의 보존 상태에 따라 CI와 C/P 값이 차이를 보였다. XRD 분석을 통해 결정화 정도를 비교한 결과 $30^{\circ}-35^{\circ}$ 범위에서 동물뼈의 보존 상태를 구분할 수 있었다. FTIR-ATR과 XRD 분석 결과, 몽골 대형포유류뼈의 보존 상태가 가장 양호하였고 나주 소뼈, 함안 소뼈의 순서로 보존 상태가 좋지 않았다. 이는 뼈 단면의 조직학 분석 결과와도 일치한다. 이를 통해 화학적 평가 기준은 우리나라에서 출토되는 동물뼈의 보존 상태를 파악하는데 적용이 가능할 것으로 판단된다.

• 한국자기학회지
• /
• 제16권5호
• /
• pp.245-248
• /
• 2006

Sol-gel법을 이용하여 단일상을 갖는 $Tb_{3-x}Bi_xFe_5O_{12}$ 분말 시료를 제조하였으며, 그 결정학적 및 자기적 특성을 x-선 회절법(XRD), 진동 시료 자화율 측정법(VSM), $M\"{o}ssbauer$ 분광법으로 연구하였다. XRD 분석 결과 결정구조는 Ia3d의 공간그룹을 갖는 cubic 구조임을 알 수 있었고, Bismuth의 치환량이 x=0.5, 0.75, 1.0 및 1.25로 증가할수록 격자상수가 각각 $a_0=12.466{\AA},\;12.487{\AA},\;12.499{\AA},\;12.518{\AA}$으로 선형적으로 증가함을 확인할 수 있었다. VSM을 이용한 온도에 따른 자기모멘트 측정 결과 Bismuth의 치환량이 증가하면 $N\'{e}el$ 온도는 증가하며 compensation 온도는 감소함을 확인할 수 있었다. 또한 field cooled 조건에서 비정상적인 음의 자화값이 관측되었다. $M\"{o}ssbauer$ 스펙트럼은 4.2 K에서부터 $N\'{e}el$ 온도까지 측정하였으며, 분석 결과 상온에서 모든 시료의 이성질체 이동치의 값은 평균적으로 0.27mm/s로 철의 이온상태가 +3가 임을 확인할 수 있었다.

• Bulletin of the Korean Chemical Society
• /
• 제27권6호
• /
• pp.853-856
• /
• 2006

Dion-Jacobson phases $CsCa_2Nb_2FeO_9$ and $CsCa_2Nb_2AlO_9$ were reinvestigated by the Rietveld analysis of powder X-ray diffraction (XRD) method, scanning electron microscopy (SEM), and energy dispersive X-ray spectroscopy (EDS). These nominal compounds, previously known as the oxygen-deficient layered perovskites with the sequences of $NbO_6-MO_4-NbO_6$ in tripled slab, in fact, were mixed phases of n = 3 Dion-Jacobson phases and impurities such as $Ca_2NbFeO_6$ and $Ca_3Al_2O_6$. The difference of morphology and chemical in-homogeneity between Dion-Jacobson phases and impurities could be clearly identified by scanning electron microscopy with energy-dispersive X-ray spectroscopy. The chemical composition of $CsCa_2Nb_2FeO_9$ was calculated into $Cs_{0.59}Ca_{2.64}Nb_{2.92}Fe_{0.81}$ in small agglomerate crystals and $Cs_{0.95}Ca_{1.97}Nb_{3.08}Fe_{0.15}$ in long plate-like crystals.

• 대한화학회지
• /
• 제60권5호
• /
• pp.299-309
• /
• 2016

In this study, the physicochemical and electrochemical properties of carbon nanomaterials and synthesized nano-carbon/Si composites were studied. The nano-carbon/Si composites were ball-milled to a nano size and coated with pyrolytic carbon using Chemical Vapor Deposition (CVD). They were then finely mixed with respective nano-carbon materials. The physicochemical properties of samples were analyzed using Scanning Electron Microscopy (SEM), Energy Dispersive X-ray Spectroscopy (EDS), Raman spectroscopy, X-ray Diffraction (XRD), X-ray Photoelectron Spectroscopy (XPS), and surface area analyzer. The electrochemical characteristics were investigated using the galvanostatic charge-discharge and cyclic voltammetry (CV) measurements. Three-electrode cells were fabricated using the carbon nanomaterials and nano-carbon/Si composites as anode materials and LiPF₆ and LiClO₄ as electrolytes of Li secondary batteries. Reversibility using LiClO₄ as an electrolyte was superior to that of LiPF₆ as the electrolyte. The initial discharge capacities of nano-carbon/Si composites were increased compared to the initial discharge capacities of nano-carbon materials.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.61-64
• /
• 2008

$Pr_{0.3}Sr_{0.7}Co_{0.3}Fe_{0.7}O_{3-\delta}$ (PSCF3737) was prepared and characterized as a cathode material for intermediate temperature-operating solid oxide fuel cell (IT-SOFC). X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), extended X-ray absorption fine structure (EXAFS), and electrical property measurement were carried out to study cathode performance of the material. XPS and EXAFS results proved that oxygen vacancy concentration was decreased and lattice constants of the perovskite structure material were increased by doping Fe up to 70 mol% at B-site of the crystal structure, which also extended the distance between oxygen and neighbor atoms. Thermal expansion coefficient (TEC) of PSCF3737 is smaller than that of $Pr_{0.3}Sr_{0.7}CoO_{3-\delta}$(PSC37) due to lower oxygen vacancy concentration. PSCF3737 showed better cathode performance than PSC37. It might be due good adhesion by a smaller difference of TEC between $Gd_{0.1}Ce_{0.9}O_2$ (CGO91) and electrode. Composite material PSCF3737-CGO91 showed better compatibility of TEC than PSCF3737. However, PSCF3737-CGO91 did not represent higher electrochemical property than PSCF3737 due to decreased reaction sites by CGO91.

• Bulletin of the Korean Chemical Society
• /
• 제32권9호
• /
• pp.3395-3399
• /
• 2011

Copper oxide thin films were synthesized by reactive radio frequency magnetron sputtering at different oxygen gas ratios. The chemical and physical properties of the thin films were investigated by X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), atomic force microscopy (AFM), and X-ray diffraction (XRD). XPS results revealed that the dominant oxidation states of Cu were $Cu^0$ and $Cu^+$ at 0% oxygen ratio. When the oxygen ratios increased above 5%, Cu was oxidized as CuO as detected by X-ray induced Auger electron spectroscopy and the $Cu(OH)_2$ phase was confirmed independent of the oxygen ratio. The valence band maxima were $1.19{\pm}0.09$ eV and an increase in the density of states was confirmed after formation of CuO. The thickness and roughness of copper oxide thin films decreased with increasing oxygen ratio. The crystallinity of the copper oxide films changed from cubic Cu through cubic $Cu_2O$ to monoclinic CuO with mean crystallite sizes of 8.8 nm (Cu) and 16.9 nm (CuO) at the 10% oxygen ratio level.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.204.1-204.1
• /
• 2014

스마트폰과 같은 통신기기 및 각종 전자제품에 있어 크기의 축소와 간소화 추세에 따라 인쇄회로기판(PCB)의 초미세회로설계 기술이 요구됨에 따라, 인쇄회로기판과 첨단 전자부품 사이의 접합 신뢰성을 향상시키기 위해 무전해 니켈 도금이 널리 사용되고 있다. 일반적으로, 무전해 Ni도금은 강산, 강염기성 용액을 이용하여 수행되고 있다. 따라서, 공정과정 중에 기판의 손상을 초래하기도 할뿐만 아니라, 환경적으로도 문제시 되고 있다. 본 연구에서는 친환경적 도금공정의 개발을 위해 중성에서 N-(B)무전해 도금을 시행하였다. 중성의 무전해 도금공정은 어떠한 기판을 사용하여도 기판의 손상없이 도금이 가능하다는 장점을 가지고 있고, Boron(B)은 Ni을 비정질화 시키는 물질로 알려져 있다. B가 첨가된 무전해 Ni도금 박막에 있어 B의 영향을 알아보기 위하여 중성조건에서 B를 포함한 DMAB의 첨가량을 조절하였다. Ni-(B) 무전해 도금 시 도금조의 온도는 $40^{\circ}C$로 하였고, 무전해 도금액의 pH는 7(중성)로 유지하였다. Cu Foil기판을 사용하여 DMAB의 양에 따라 성장된 Ni-B무전해 도금 박막의 특성을 분석하기 위해 X-ray Diffraction (XRD), Field Emission Scanning Electron Microscope (FE-SEM), Optical microscope (OM), X-ray Photoelectron Spectroscopy (XPS), X-ray Absorption Spectroscopy (XAS)을 이용하였다.

• 한국재료학회지
• /
• 제27권4호
• /
• pp.221-228
• /
• 2017

Various morphologies of copper oxide (CuO) have been considered to be of both fundamental and practical importance in the field of electronic materials. In this study, using Cu ($0.1{\mu}m$ and $7{\mu}m$) particles, flake-type CuO particles were grown via a wet oxidation method for 5min and 60min at $75^{\circ}C$. Using the prepared CuO, AlN, and silicone base as reagents, thermal interface material (TIM) compounds were synthesized using a high speed paste mixer. The properties of the thermal compounds prepared using the CuO particles were observed by thermal conductivity and breakdown voltage measurement. Most importantly, the volume of thermal compounds created using CuO particles grown from $0.1{\mu}m$ Cu particles increased by 192.5 % and 125 % depending on the growth time. The composition of CuO was confirmed by X-ray diffraction (XRD) analysis; cross sections of the grown CuO particles were observed using focused ion beam (FIB), field emission scanning electron microscopy (FE-SEM), and energy dispersive analysis by X-ray (EDAX). In addition, the thermal compound dispersion of the Cu and Al elements were observed by X-ray elemental mapping.

• Corrosion Science and Technology
• /
• 제7권4호
• /
• pp.201-207
• /
• 2008

$CO_2$ corrosion product scales formed on 13 Cr tubing steel in autoclave and in the simulated corrosion environment of oil field are investigated in the paper. The surface and cross-section profiles of the scales were observed by scanning electron microscopy (SEM), the chemical compositions of the scales were analyzed using energy dispersion analyzer of X-ray (EDAX), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) to confirm the corrosion mechanism of the 13 Cr steel in the simulated $CO_2$ corrosion environment. The results show that the corrosion scales are formed by the way of fashion corrosion, consist mainly of four elements, i.e. Fe, Cr, C and O, and with a double-layer structure, in which the surface layer is constituted of bulky and incompact crystals of $FeCO_3$, and the inner layer is composed of compact fine $FeCO_3$ crystals and amorphous $Cr(OH)_3$. Because of the characteristics of compactness and ionic permeating selectivity of the inner layer of the corrosion product scales, 13 Cr steel is more resistant in $CO_2$ corrosion environment.