• Explosives and Blasting
• /
• v.28 no.2
• /
• pp.133-147
• /
• 2010

A Suggestion of In-situ Rock Mass Evaluation and Correlation between Rock Mass Classfication MethodsThe purpose of this study is to find out rock mass classification method which is practically applicable to a field and to consider a correlation between the new method and the old method. Rock mass is an aggregate of separated blocks. To express the aggregate, the properties of both intact rock and rock mass should be considered. In this study, therefore, parameters for rock mass description are classified into rock strength and rock structure. Indices for parameters evaluation are obtained from old method and the strength and structure property of rock is described by using those indices. Value of 25 is allocated to each parameter obtained. $RMR_{basic}$ =0.86(X=Method)+14.47 is derived between $RMR_{basic}$ and this study and $RMR^*$ = 0.87(X-Method)+9.20 is derived between revised RMR and this study. Coefficient of determination is $R^2$=0.841 and $R^2$=0.846 each.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.25 no.3
• /
• pp.101-112
• /
• 2021

SpaceX shows various strategies such as constructing various payload portfolio through the reuse of Falcon 9 and Falcon Heavy, constructing the launch vehicles using one type of engine, the transition from kerosene engine to methane engine, and the use of 3D printing. In this study, launch vehicle proposals that can cover a variety of payloads and trajectories from KOMPSAT to GEO-KOMPSAT were constructed, and ten launch vehicles using kerosene gas generator cycle engine, kerosene staged-combustion cycle engine, and methane staged-combustion cycle engine were reviewed. Of the ten launch vehicles, the reusable launch vehicle using a 35-ton methane engine was rated as the best in terms of development potential.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.1
• /
• pp.74-85
• /
• 2010

In order to formulate the compounded polypropylene(C-PP) which is suitable to an automotive door trim panel, 9 sorts of properties were measured after manufacturing the C-PP using an extruder and an injection machine with polypropylene(PP), ethylene-octene rubber(EOR) and talc. Mixture design, especially extreme vertices design, in DOE with MINITAB - commercial software was used to analyze the data. The relations between each property and each component, for example, $y=0.00907222x_1+0.00870556x_2+0.0155722x_3$ for specific gravity, were found out by the regression analysis and the variance analysis. The optimized formulation of the C-PP for an automotive door trim panel was acquired at PP(77.6962), EOR(11.0238) and talc(10.2800) by use of the response optimizer(mixture) in MINITAB.

• Analytical Science and Technology
• /
• v.9 no.1
• /
• pp.20-25
• /
• 1996

Trace levels of uranium and thorium in geologic samples are determined rapidly by a direct wavelength-dispersive X-ray fluorescence method. Relative intensity of scattered tube radiation was used as an internal standard to compensate for variations in instrumental operating characteristics. U and Th can be determined within a precision of ${\pm}10%$ and accuracy of ${\pm}15%$ or less with measuring times of 50 seconds for Th and 400 seconds for U, respectively. The results of XRF analysis were in good agreement with those of other methods such as nutron activation analysis and inductively coupled plasma atomic emission spectrometry.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.7
• /
• pp.629-637
• /
• 2008

We report several experimental data capable of evaluating the amorphous-to-crystalline (a-c) phase transformation in $(Ag)_x(Ge_2Sb_2Te_5)_{1-x}$ (x = 0, 0.05, 0.1) thin films prepared by a thermal evaporation. The isothermal a-c structural phase changes were evaluated by XRD, and the optical transmittance was measured in the wavelength range of $800{\sim}3000$ nm using a UV-vis-IR spectrophotometer. A speed of the a-c transition was evaluated by detecting the reflection response signals using a nano-pulse scanner with 658 nm laser diode (power P = $1{\sim}17$ mW, pulse duration t = $10{\sim}460$ ns). The surface morphology and roughness of the films were imaged by AFM. It was found that the crystallization speed was so enhanced with an increase of Ag content. While the sheet resistance of c-phase $(Ag)_x(Ge_2Sb_2Te_5)_{1-x}$ was similar to that of c-phase $Ge_2Sb_2Te_5$ (i.e., $R_c{\sim}10{\Omega}/{\square}$), the sheet resistance of a-phase $(Ag)_x(Ge_2Sb_2Te_5)_{1-x}$ was found to be lager than that of a-phase $Ge_2Sb_2Te_5$, $R_a{\sim}5{\times}10^6{\Omega}{/\square}$. For example, the ratios of $R_a/R_c$ for $Ge_2Sb_2Te_5$ and $(Ag)_{0.1}(Ge_2Sb_2Te_5)_{0.9}$ were approximately $5{\times}10^5$ and $5{\times}10^6$, respectively.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.33 no.3
• /
• pp.215-221
• /
• 1988

The hop yield prediction model developed based on meteorological elements in Hoeongseong was Y=6,042.846-17.665 $X_1$-0.919 $X_2$-96.538 $X_3$-138.105 $X_4$＋86.910 $X_{5}$ ＋ $X_{6}$ with MS $E_{p}$ of 25.258, $R_{p}$$^{2}$ of 0.9991, R $a_{p}$$^{2}$ of 0.9962 and $C_{p}$ of 7.00. The minimum air temperature at early growing stage ( $X_1$), the total precipitation at cone ripening stage ( $X_2$), the maximum air temperature at flower bud differentiation stage ( $X_3$) and the maximum air temperature at flowering stage ( $X_4$) influenced on hop yield as decrement weather elements. The average air temperature at early growing stage ( $X_{5}$ ) and the total sunshine hours at cone development stage ( $X_{6}$ ) influenced on hop yield as increment weather elements.lements.

• Journal of Veterinary Clinics
• /
• v.21 no.2
• /
• pp.168-171
• /
• 2004

The effects of alterations of dose of xylaznie (X) and Zoltil$\circledR$ (TZ) on canine anesthesia were examined. Experimental groups were divided into three (Group 1: X 1.1 mg/kg and TZ 10 mg/kg, Group 2: X 1.65 mg/kg and TZ 7.5 mg/kg, Group 3: X 2.2 mg/kg and TZ 5 mg/kg), and each had 5 dogs. A femoral artery was catheterized for measurement of blood pressure, and baseline value was measured. The dogs were sedated with xylazine intramuscularly, then after 10 minutes TZ were injected intravenously. Mean arterial blood pressures (MAP), duration of analgesia, mean arousal time (MAT) and mean walking time (MWT) after TZ injection were measured, and the depth of analgesia and the quality of recovery were scored. The values of MAP were recorded from the time of pre-xylazine injection to arousal. Duration of analgesia and was assessed by tail clamping test, and which were done at 10 minutes intervals after TZ injection. The decreases of MAP from 40 minutes after TZ injection were significant (p<0.05). In group 2, MAP at 20 minutes, and from 40 minutes to arousal were significantly decreased (p<0.05). In group 3, MAP were significantly decreased from 40 minutes. MAT were 62.2$\pm$9.2 minutes in group 1, 60.2$\pm$7.5 minutes in group 2, and 71.0$\pm$6.9 minutes in group 3. MAT in group 3 was significantly increased compared with group 2 (p<0.05), and the differences of MWT among each groups were not significant (p>0.05). The scores of quality of recovery were significantly lowered in group 3 compared with group 1 or group 2, which means the side effects of recovery were less occurred. Thus, it was considered that the combination X 2.2 mg/kg IM and TZ 5 mg/kg IV is more effective to surgical procedures and to prevent long and rough recovery of Zoletil anesthesia.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.8 s.111
• /
• pp.767-772
• /
• 2006

The receiver of this paper is Dual-band monopulse type for prototype of tracking radar. Localization of radar technology is an issue of SamsungThales and go into development. Dual-band radar in comparison with Single-band radar requires higher cost and power consumption but there are many advantages of dealing with jamming, detection range, image signal rejection, cloud-rain influence, clutter, resolution. The receiver is comprised of X-band RF head module, Ka-band RF head module and common IF module. Each signal of X-band and Ka-band is selected by the switch in If module. Phase shifter in IF module of local stage controls the phase of sum, azimuth, elevation channel. In the test result, gain is $40{\pm}3 dB$, isolation of transmitter/receiver is 39 dBc, dynamic range is 110 dB and noise figure of each channel is 4.5dB and 6.9dB.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11a
• /
• pp.104-107
• /
• 2001

The fabricated La-modified lead titanate (PLT) thin flirt without poling treatment was investigated for modulation frequency dependence of pyroelectric properties by the dynamic method. $Pb_{1-x}La_{x}Ti_{1-x/4}O_3$PLT (x=0.1) thin film having 10 mol% La content was deposited on a Pt/$TiO_{x}$/$SiO_2$/Si substrate by sol-gel method. The PLT(10) thin film exhibits a relatively excellent dielectric property. The pyroelectric coefficient (p) of the PLT(10) thin film is 6.6 x $10^{-9}$C/$\textrm{cm}^2$.K without frequency dependence. The figure of merits for the voltage responsivity and specific detectivity are 1.03${\times}$$10^{-11}$/C.cm/J and 1.46 x $10^{-9}$C.cm/J, respectively. The PLT(10) thin film has voltage responsivity ($R_{V}$) of 5.15 V/W at 8 Hz. Noise equivalent power (NEP) and specific detectivity (D＊) of the PLT(10) thin film are 9.93 x $10^{-8}$W/Hz$^{1/2}$ and 1.81 x $10^{6}$ cmHz$^{1/2}$/W at the same frequency of 100 Hz, respectively. The results means that PLT thin film having 10 mol % La content is suitable for the sensing materials of pyroelectric IR sensors.

• Communications of the Korean Mathematical Society
• /
• v.9 no.3
• /
• pp.701-710
• /
• 1994

Suppose ${X_n}$ is a Markov process taking values in some arbitrary space $(S, \varphi)$ with n-stemp transition probability $$ P^{(n)}(x, B) = Prob(X_n \in B$\mid$X_0 = x), x \in X, B \in \varphi.$$ We shall call a Markov process with transition probabilities $P{(n)}(x, B)$ $\phi$-irreducible for some non-trivial $\sigma$-finite measure $\phi$ on $\varphi$ if whenever $\phi(B) > 0$, $$ \sum^{\infty}_{n=1}{2^{-n}P^{(n)}}(x, B) > 0, for every x \in S.$$ A non-trivial $\sigma$-finite measure $\pi$ on $\varphi$ is called invariant for ${X_n}$ if $$ \int{P(x, B)\pi(dx) = \pi(B)}, B \in \varphi $$.