• Korean Journal of Mathematics
• /
• v.23 no.2
• /
• pp.231-248
• /
• 2015

In this paper, we solve the following quadratic $\rho$-functional inequalities ${\parallel}f(\frac{x+y+z}{2})+f(\frac{x-y-z}{2})+f(\frac{y-x-z}{2})+f(\frac{z-x-y}{2})-f(x)-x(y)-f(z){\parallel}\;(0.1)\\{\leq}{\parallel}{\rho}(f(x+y+z+)+f(x-y-z)+f(y-x-z)+f(z-x-y)-4f(x)-4f(y)-f(z)){\parallel}$ where $\rho$ is a fixed complex number with ${\left|\rho\right|}<\frac{1}{8}$, and ${\parallel}f(x+y+z)+f(x-y-z)+f(y-x-z)+f(z-x-y)-4f(x)-4f(y)-4f(z){\parallel}\;(0.2)\\{\leq}{\parallel}{\rho}(f(\frac{x+y+z}{2})+f(\frac{x-y-z}{2})+f(\frac{y-x-z}{2})+f(\frac{z-x-y}{2})-f(x)-f(y)-f(z)){\parallel}$ where $\rho$ is a fixed complex number with ${\left|\rho\right|}$ < 4. Using the fixed point method, we prove the Hyers-Ulam stability of the quadratic $\rho$-functional inequalities (0.1) and (0.2) in complex Banach spaces.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.11a
• /
• pp.368-371
• /
• 2006

[ $La_{0.8}Sr_{0.2}Co_{1-x}Mn_xO_3$ ] cathode as a high performance cathode on YSZ electrolyte was studied by analyzing impedance spectra. It was shown that cathode property of $La_{0.8}Sr_{0.2}Co_{1-x}Mn_xO_3$ is bet ter than that of$La_{0.8}Sr_{0.2}CoO_3$. At $700^{\circ}C$ in air environment, $La_{0.8}Sr_{0.2}Co_{0.4}Mn_{0.6}O_3$ cathode on CGO- layered YSZ electrolyte showed very low area specific resistance of $0.14{\Omega}cm^2$, which is low enough for intermediate-temperature sol id oxide fuel cells. This is because material properties of ionic conductivity and thermal expansion compatibility with electrolyte were optimized. Judging from activation energy and oxygen part i al pressure dependance of cathode property, it was noted that oxygen surface exchange kinetics is dominantly influential on cathode property in higher temperature region than $700^{\circ}C$ and oxygen self-diffusion in cathode material is more influential in lower temperature region.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.11
• /
• pp.1092-1097
• /
• 2014

Unmanned flying robots have been used recently in many difficult situations. One of the major issues in this area is the problem of how long these unmanned flying robots can perform a given task successfully. For this, the development of a light body and high-efficiency power supply has been executed widely, but we do not as yet have the complete solution. In this paper, we propose a form of Multi-Copter X8, which can transform into other types to further improve these problems. The proposed robot has a 3-type modification capability, which can produce a more enhanced energy saving effect by reducing power consumption.

• Proceedings of the KIEE Conference
• /
• 1997.07d
• /
• pp.1488-1490
• /
• 1997

$(Pb_{1-x}La_x)Ti_{1-x/4}O_3$ (x=0, 0.02, 0.04, 0.06, 0.08) ceramic thin films were fabricated by Sol-Gel method. A stock solution of (Pb,La)$TiO_3$ with excess Pb 10mol% was made and spin-coated on the Pt/Ti/$SiO_2$/Si substrate at 4000rpm for 30 seconds. Coated specimens were dried on the hot-plate at $350^{\circ}C$ for 10 min and sintered at $500{\sim}750^{\circ}C$ for 1 hour. The dielectric constant, remanent polarization and coercive field of the PLT(6 at.%) thin films sintered at $650^{\circ}C$ were 884, $13.95{\mu}C/cm^2$ and 8.7kV/cm, respectively. Pyroelectric coefficient, figure of merit of pyroelectric current, voltage responsivity and detectivity of PLT(6at.%) thin films were $3.2{\times}10^{-8}\;C/cm^2K$, $1.02{\times}10^{-8}\;C{\cdot}cm/J$, $2.9{\times}10^{-11}\;C{\cdot}cm/J$, $0.29{\times}10^{-8}\;C{\cdot}cm/J$, respectively.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.2
• /
• pp.126-133
• /
• 2009

In this paper, The planar waveguide slotted antenna is presented for a satellite communication of vehicles. In stead of the microstrip patch array antenna having a dielectric loss and a feeding loss, the proposed antenna has the 3-layered waveguide feeding network structure for assembling easily. Also this antenna can receive mechanically both RHCP and LHCP transmitted from a satellite using a polarizer made from a thin single layer film. The Gain of the proposed 4X8 array antenna is 27.5dB and the gain of 8X16 array antenna is 32dB.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.5
• /
• pp.715-722
• /
• 2000

In this paper, the PLDRO is designed and implemented for X-band. It is comprised of tunable high Q resonator with a varactor diode for frequency tuning, loop filter and a 1/8 prescaler which up to 10GHz. Also, it is implemented a TCXO and a VCO signal into the phase detector and achieved a highly stable signal source. From the measurement, the designed PLDRO has the output power of 2.5dBm at 8GHz and phase noise of -64.33dBc at 10KHz offset from carrier. Its characteristic is 26 dBc. This PLDRO has much better temperature stability.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.8
• /
• pp.609-615
• /
• 2021

Three-dimensional numerical study was carried out to evaluate the aerodynamic characteristics of the supersonic grid fins installed on SpaceX Falcon 9. The present three-dimensional flow results were compared to the results by the concept of the unit grid fin previously introduced for more efficient and simpler flow calculations, and the validity of the approach of the unit grid fin were evaluated. The aerodynamic characteristics in supersonic flights Mach 2.8 of SpaceX Falcon 9 with various angle of attacks were also obtained.

• Korean Journal of Materials Research
• /
• v.31 no.8
• /
• pp.445-449
• /
• 2021

Zintl compound Mg₃Sb₂ is a promising candidate for efficient thermoelectric material due to its small band gap energy and characteristic electron-crystal phonon-glass behavior. Furthermore, this compound enables fine tuning of carrier concentration via chemical doping for optimizing thermoelectric performance. In this study, nominal compositions of Mg_3.8Sb_2-xTe_x (0 ≤ x ≤ 0.03) are synthesized through controlled melting and subsequent vacuum hot pressing method. X-ray diffraction (XRD) and scanning electron microscopy (SEM) are carried out to investigate phase development and surface morphology during the process. It should be noted that 16 at. % of excessive Mg must be added to the system to compensate for the loss of Mg during melting process. Herein, thermoelectric properties such as Seebeck coefficient, electrical conductivity, and thermal conductivity are evaluated from low to high temperature regimes. The results show that Te substitution at Sb sites effectively tunes the majority carriers from holes to electrons, resulting in a transition from p to n-type. At 873 K, a peak ZT value of 0.27 is found for the specimen Mg_3.8Sb_1.99Te_0.01, indicating an improved ZT value over the intrinsic value.

• Journal of the Korean Society for Heat Treatment
• /
• v.36 no.4
• /
• pp.223-229
• /
• 2023

This work was intended to investigate the effects of Zn content on microstructure and hardness of discontinuous precipitates (DPs) produced by continuous cooling (CC) in Mg-8%Al-X%Zn alloys with 0%, 0.5% and 1% of Zn contents (wt%). The DPs in the alloys possessed a wide range of (α+β) interlamellar spacings, which is attributed to the different transformation temperatures during CC. The higher Zn content resulted in the lower level of interlamellar spacings of the DPs, along with thinner and larger volume fraction of β phase layer in the DPs. It is noted that the DPs in the alloy with higher Zn content exhibited higher hardness, and that the ratio of increase in hardness of the DPs to that of the as-cast state was also increased with increasing Zn content. The reason was discussed on the basis of microstructural differences of the DPs in the Mg-8%Al-X%Zn alloys.

• Applied Chemistry for Engineering
• /
• v.7 no.5
• /
• pp.992-998
• /
• 1996

The $La_{0.8}Ca_{0.2}CoO_3$ prepared by a citrate process was shown to have higher oxygen reduction current density and specific activity than $LaCoO_3$, $La_{0.6}Ca_{0.4}CoO_3$. In the cyclic voltammogram, an oxygen desorption peak of a $La_{0.8}Ca_{0.2}CoO_3$+carbon electrode was larger than that of a only carbon electrode. $La_{0.8}Ca_{0.2}CoO_3$ sintered at $900^{\circ}C$ for 5 hours was shown high oxygen reduction current density because of the particle size distribution and sintering effect.