• Journal of The Korean Astronomical Society
• /
• v.52 no.1
• /
• pp.1-9
• /
• 2019

We present the results of the spectral and temporal analysis of eight X-ray point sources in five nearby (distance < 20 Mpc) galaxies observed with Chandra. For spectral analysis, an absorbed powerlaw and an absorbed diskblackbody were used as empirical models. Six sources were found to be equally fitted by both the models while two sources were better fitted by the powerlaw model. Based on model parameters, we estimate the X-ray luminosity of these sources in the energy range 0.3 - 10.0 keV, to be of the order of ${\sim}10^{39}ergs\;s^{-1}$ except for one source (X-8) with $L_X>10^{40}ergs\;s^{-1}$. Five of these maybe classified as Ultraluminous X-ray sources (ULXs) with powerlaw photon index within the range, ${\Gamma}{\sim}1.63-2.63$ while the inner disk temperature, kT ~ 0.68 - 1.93 keV, when fitted with the disk blackbody model. The black hole masses harboured by the X-ray point sources were estimated using the disk blackbody model to be in the stellar mass range, however, the black hole mass of one source (X-6) lies within the range $68.37M_{\odot}{\leq}M_{BH}{\leq}176.32M_{\odot}$, which at the upper limit comes under the Intermediate mass black hole range. But if the emission is considered to be beamed by a factor ~ 5, the black hole mass reduces to ${\sim}75M_{\odot}$. The timing analysis of these sources does not show the presence of any short term variations in the kiloseconds timescales.

• Korean Journal of Metals and Materials
• /
• v.48 no.1
• /
• pp.8-18
• /
• 2010

This study aimed at investigating quasi-static and dynamic torsional deformation behavior of three API X70 and X80 linepipe steels. Quasi-static and dynamic torsional tests were conducted on these steels. having different grain sizes and volume fractions of acicular ferrite and polygonal ferrite, using a torsional Kolsky bar. The test data were then compared via microstructures and adiabatic shear band formation,. The dynamic torsional test results indicated that the steels rolled in the single phase region had higher maximum shear stress than the steel rolled in the two phase region, because the microstructures of the steel rolled in the single phase region were composed mainly of acicular ferrites. In the X80 steel rolled in the single phase region, the increased dynamic torsional properties could be explained by a decrease in the overall effective grain size due to the presence of acicular ferrite having smaller effective grain size. The possibility of adiabatic shear band formation was analyzed from the energy required for void initiation and variation in effective grain size.

• Journal of Oriental Neuropsychiatry
• /
• v.34 no.3
• /
• pp.151-161
• /
• 2023

Objectives: To examine effect of Korean medical treatment on patients with insomnia and correlations among changes in psychological scales before and after treatment. Methods: Medical records of 38 patients diagnosed with insomnia based on DSM-V who received Korean medical treatment (herbal-medication, acupuncture, Korean psychotherapy) for at least 8 weeks were retrospectively reviewed. Psychological scales including Insomnia Severity Scale (ISI), Beck Depression Inventory-II (BDI-II), State-Trait Anxiety Inventory (STAI), Beck Anxiety Inventory (BAI), and State-Trait Anger Expression Inventory (STAXI) were measured every four weeks and analyzed. Results: After eight weeks of treatment, ISI, BDI-II, BAI, STAI-X-1/2, and STAXI-S/T showed statistically significant decreases. Psychological scale pairs that showed a statistically significant correlation were ISI and BDI-IIㆍSTAI-X-1ㆍSTAI-X-2ㆍTA, BDI-II and BAIㆍSTAI-X-1ㆍSTAI-X-2ㆍAX-I, BAI and STAI-X-1ㆍSTAI-X-2ㆍSAㆍTA, STAI-X-1 and STAI-X-2, SA and TA, and TA and AX-I. In women, the improvement of AX-C was high. The improvement in AX-I score was significant when the disease duration was more than one year. A lower pretreatment BAI value predicted a greater decrease in ISI score after treatment. Conclusions: Korean medical treatment including herbal medicine, acupuncture, and Korean psychotherapy was effective in improving insomnia symptoms and accompanying symptoms such as depression, anxiety, and anger. In the future, more in-depth follow-up research is needed on the mechanisms by which various psychological problems (depression, anxiety, anger, etc) cause and worsen insomnia and the psychological symptoms secondary to insomnia.

• The Korean Journal of Mycology
• /
• v.26 no.2 s.85
• /
• pp.265-274
• /
• 1998

This study was carried out to obtain the basic data for an artificial cultivation of Phellinus sp.. The optimum conditions for the mycelial growth on the different sawdusts (Quercus aliena, Morns alba and Alnus japonica) substrate of an isolated Phellinus sp. were optimized by response surface methodology. The ratio of rice bran addition to sawdust and the suitable moisture content for the mycelial growth in the all sawdust media were about 30% (w/w) and $65{\sim}70%$ (w/v), respectively. The initial pHs for the mycelial growth of Quercus aliena and Morns alba were in the range of $pH\;5{\sim}6$, whereas Alnus japonica was obtained at pH 6. The optimum temperature for the mycelial growth was about $25{\sim}30^{\circ}C$, depending on the different kinds of wood substrates. From the response surface analysis, the values of independent variables of Quercus aliena at stationary points were determined to be 31.01 % (w/w) of rice bran, pH of 5.31 and 69.03% (w/v) of moisture content, and the expected value of mycelial growth was about 8.32 cm. Both the ratio of rice bran addition to sawdust $(X_1)$ and moisture content $(X_3)$ were effective to the mycelial growth. In the case of Morns alba, the ratio of rice bran addition to sawdust, initial pH and moisture content at the stationary points were 28.77% (w/w), 5.28 and 69.8 (w/v),respectively, and the expected mycelial growth of 7.60 cm was obtained. Stationary points for the mycelial growth in the sawdust media of Alnus japonica were 28.74% (w/w) of rice bran, pH of 6. 04 and 66.96% (w/v) of moisture content, and the expected values of mycelial growth was about 5.38 cm. Based on the above results, there was correlations between the mycelial growth and independent variables, and the effect of rice bran $(X_1)$ and initial pH $(X_2)$ for the mycelial growth were higher than the moisture content $(X_3)$. The optimum species of sawdust media for the my celial growth of Phellinus sp. was in the order of Quercus aliena > Morns alba > Alnus japonica.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.4
• /
• pp.439-446
• /
• 2007

This study was performed to investigate the effect of long-term administration of Saengshik on growth parameters of growing rats. Male Sprague-Dawley rats were fed on AIN-93G basal diets for 12 weeks and assigned to the following groups: rats administrated orally with Saengshik at the dose of 1g/kg/day (1xJS ), 2g/kg/day (2xJS), 4g/kg/day (4xJS) and distilled water (Control). Rats were sacrificed at 4, 8, 12 weeks after oral administration. Bone mineral density (BMD) and bone mineral contents (BMC) were measured by PIXImus densitometry and serum insulin-like growth factor-1 (IGF-1) concentration were determined by using EIA method. Body weight and food intake did not show significant changes within groups for 12 weeks. Physical longitudinal growth indexes, body length and femur length were significantly increased in Saengshik-administered groups at 12 weeks, in which BMD and BMC also significantly increased. Also, in blood IGF-1 level, Saengshik-administered groups were remarkedly higher than control group at 4 week (p<0.001), in which significantly higher at 8 week and 12 week. These results suggest a close relation between administration of Saengshik and increment of longitudingal bone growth. Therefore, as the result of this study, it could be expected that the administration of Saengshik for 12 weeks is helpful to the increase of longitudinal growth and growth factors in rats. Furthermore, we propose that the consumption of Saengshik as dietary supplementation may promote to increase in longitudinal bone growth in growing children.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2002.09a
• /
• pp.407-410
• /
• 2002

Monochromatic x-ray CT has several advantages over conventional CT, which utilizes bremsstrahlung white x-rays from an x-ray tube. There are several methods to produce such monochromatic x-rays. The most popular one is crystal diffraction monochromatization, which has been commonly used because of the fact that the energy spread is very narrow and the energy can be changed continuously. The alternative method is the use of fluorescent x-ray, which has several advantages such as large beam size and fast energy change. We have developed a parallel-beam and a fan-beam monochromatic x-ray CT, and compared some characteristics such as accuracy of CT numbers between those systems. The fan beam monochromatic x-rays were generated by irradiating target materials by incident white x-rays from a bending magnet beam line NE5 in 6.5 GeV Accumulation Ring at Tukuba. The parallel beam monochromatic x-rays were generated by using a silicon double crystal monochromator at the bending magnet beam line BL-20BM in Spring-8. A Cadmium telluride (CdTe) 256 channel array detector with 512mm sensitive width capable of operating at room temperature was used in the photon counting mode. A cylindrical phantom containing eight concentrations of gadolinium was used for the fan beam monochromatic x-ray CT system, while a phantom containing acetone, ethanol, acrylic and water was used for the parallel monochromatic x-ray CT system. The linear attenuation coefficients obtained from CT numbers of those monochromatic x-ray CT images were compared with theoretical values. They showed a good agreement within 3%. It was found that the quantitative measurement can be possible by using the fan beam monochromatic x-ray CT system as well as a parallel beam monochromatic X-ray CT system.

• Journal of the Korean Society of School Health
• /
• v.6 no.1
• /
• pp.69-77
• /
• 1993

The purpose of this study is to obtain some basic data necessary for more effective health education by questionnaire survey on the knowledge, attitude and preventive health behavior. The questionnaire forms were delivered to 500 university students in seoul during periods from 24 to 28, september, from 7 to 19, October, 1991. The result of this study can be summarized as follows: 1) Washing hands after using toilet has relationship to sex (fece: $X^2=51.55$, urine: $X^2=36.25$, p<0.05). Index of female was higher than that of male. 2) Tooth brushing has relationship to sex ($X^2=13.28$, p<0.05). The tendency of practice of male and female was similar. 3) Changing of underwear 1~3 days were the highest and it has relationship to sex ($X^2=162.846$, p<0.05), birth place ($X^2=97.18$, p<0.05). Index of female was higher than that of male. 4) Bathing has relationship to sex ($X^2=80.92$, p<0.05). birth place ($X^2=54.18$, p<0.05, pocket money ($X^2=33.04$, p<0.05). 5) The attitude on occurrence of epidemic disease has relationship to sex ($X^2=70.33$, p<0.05). A female was more senstive than male. 6) In case of slight disease, a cold, illness from fatigue, the utilization of drug store was higher. The utilization of medical center according to disease has relationship to sex ($X^2=69.84$, p<0.05). 7) Medical behaviorism has relationship to school year ($X^2=35.18$, p<0.05), sex ($X^2=42.18$, p<0.05). 8) The utilization of school health center has relationship to sex ($X^2=10.73$, p<0.05), the school year ($X^2=72.09$, p<0.05), the pocket money ($X^2=38.80$, p<0.05). 9) The experience of health education has relationship to school year ($X^2=10.96$, p<0.05). No experence is 95.4%. 10) The subject for health-medical knowledge is necessary. The need for subject has relationship to sex ($X^2=10.86$, p<0.05).

• Korean Journal of Culture and Social Issue
• /
• v.26 no.3
• /
• pp.195-220
• /
• 2020

The purpose of this study was to validate the Korean version of the post-traumatic growth inventory-expanded(K-PTGI-X), which has been widely used to assess posttraumatic growth. The PTGI-X is a measure of the addition of the items to measure the existential growth as the need for modification to the factors of the 'increase of spiritual interest' in the existing PTGI is suggested. We examined the factor structure, reliability, and validity of a Korean version of the PTGI-X among 625 Korean adults who have experienced trauma events. First, EFA confirmed the appropriate PTGI-X factor structure and found that the 4-factor structure was the most appropriate. Next, as a result of CFA, it was found that the model to which correlation between items was added to the 4-factor model was good. Next, testing internal consistency, CR, and AVE of the K-PTGI-X showed that PTGI-X's items are reliable. Also, we tested the concurrent validity and discriminative validity. All of the K-PTGI-X scales significantly correlated with measures of deliberate rumination and core-belief except for the intrusive rumination. Finally, to add an understanding of K-PTGI-X, t-test according to demographic variables was conducted. Recommendations for future research and implications were discussed.

• Journal of radiological science and technology
• /
• v.7 no.1
• /
• pp.3-11
• /
• 1984

The major findings of this investigation on radiographic works in 125 medical institutions around Seoul and Kyung-Ki area, from March 1983 to February 1984, are summarized as follows. 1. The number of references provided on radiographic techniques were 3 to 5 in general hospitals (52.1%), in hospitals (58.5%), and clinics (44.5%), and only the 10.4% of general hospitals had 11 or more. 2. The relatively high percentages of 75.0% of general hospitals and 68.3% of hospitals have established the standardized radiographic methods for regions examined, but most clinics (61.1%) have not. 3. As a log system for the radiographic request, the method of "routine study, or all the x-ray examinations are marked as 0 on a printed form" was most commonly used by general hospitals (62.5%) and hospitals (51.2%), and "the doctors employ their own methods" in most clinics (44.6%). 4. In the 85.4% of general hospitals, the 68.3% of hospitals and the 38.9% of clinics, the data such as diagnosis, clinic history, purpose of x-ray examination were recorded on a radiographic request at all times, or at least in part. 5. On a scale of hardness and easiness of order of doctors, the greatest response was "fairly easy to understand", and the 37.5% of general hospitals responded as "sometimes hard". 6. In determining the standards for radiographic factors, the general hospitals (62.5%) and hospitals (65.9%) adapted mostly "a departmental check list", and the clinics (61.1%) used mainly "a personal decision". 7. In using the immobilizing devices, angligner, and radiographic accessories, the Percentages were high in general hospitals and hospitals on the one hand, and were low in clinics on the other. 8. A consideration with regard to the devices for an improvement of examination of the same patients was totally ignored by the 50.0% of clinics, the 26.8% of hospitals and the 20.8% of general hospitals. 9. The causes of re-examination were due largely to patients (33.6%), and followed proportionately by incorrect exposure (22.8%), errors in positioning (22.0%), film processing faults (9.2%), conditions of x-ray equipments (8.8%), and quality of x-ray films (3.6%). 10. The conference on radiography was conducted regularly or irregularly by the 87.5% of general hospitals, the 56.1% of hospitals, and the 27.7% of clinics, and the meeting was proceeded only by radiologic technologists.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.11
• /
• pp.1034-1046
• /
• 2011

In this paper, a design and fabrication of 40 W power amplifier for the X-band using load-pull measurement of GaN HEMT chip are presented. The adopted active device for power amplifier is GaN HEMT chip of TriQuint company, which is recently released. Pre-matched fixtures are designed in test jig, because the impedance range of load-pull tuner is limited at measuring frequency. Essentially required 2-port S-parameters of the fixtures for extraction optimal input and output impedances is obtained by the presented newly method. The method is verified in comparison of the extracted optimal impedances with data sheet. The impedance matching circuit for power amplifier is designed based on EM co-simulation using the optimal impedances. The fabricated power amplifier with 15${\times}$17.8 $mm^2$ shows the efficiency above 35 %, the power gain of 8.7~8.3 dB and the output power of 46.7~46.3 dBm at 9~9.5 GHz with pulsed-driving width of 10 usec and duty of 10 %.