• Journal of the Korean Society for Heat Treatment
• /
• v.36 no.5
• /
• pp.298-302
• /
• 2023

Transparent and conducting tungsten (W) doped indium oxide (IWO) thin films were deposited on the glass substrate by using RF magnetron sputtering and then electron irradiation was conducted to investigate the effect of electron irradiation on the optical and electrical properties of the films. The electron irradiated films showed three x-ray diffraction peaks of the In₂O₃ (222), (431) and (046) planes and the full width at half maximum values are decreased as increased electron irradiation energy. In the atomic force microscope analysis, the surface roughness of as deposited films was 1.70 nm, while the films electron irradiated at 700 eV, show a lower roughness of 1.28 nm. In this study, the figure of merit (FOM) of as deposited films is 2.07 × 10^-3 Ω^-1, while the films electron irradiated at 700 eV show the higher FOM value of 5.53 × 10^-3 Ω^-1. Thus, it is concluded that the post-deposition electron beam irradiation is the one of effective methods to enhance optical and electrical performance of IWO thin films.

• Journal of Korean Critical Care Nursing
• /
• v.16 no.1
• /
• pp.56-70
• /
• 2023

Purpose : This study aimed to identify the effects of a multifaceted pediatric delirium education program for pediatric intensive care unit (PICU) nurses on their delirium knowledge, confidence in delirium nursing, and delirium evaluation accuracy. Methods : This study used a one-group pretest-posttest design. The participants were 50 nurses in two units of the PICU at S General Hospital in Seoul. All participants took a 1-hour lecture with case-based practice for the first two weeks, and received feedback as they applied the program to clinical practice over the next two weeks. Test measures were completed before and after the four week intervention period for all participants. The delirium evaluation accuracy was measured using the Korean version of the Cornell Assessment of Pediatric Delirium. Data were analyzed using the chi-square and paired t-tests. Results : After the Pediatric Delirium Education Program, nurses' delirium knowledge (x²=11.65, p =.001), confidence in delirium nursing (t=9.71, p<.001), and delirium evaluation accuracy (t=6.07, p<.001) improved significantly. Conclusions : Pediatric delirium education programs for PICU nurses were effective. For active application of the program in clinical practice in the future, various cases of childhood delirium and specific strategies for each subject must be developed. To achieve this, long-term intervention and research for multiple organizations are required.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.7 no.1
• /
• pp.70-75
• /
• 1997

An improved technique based upon an electron beam evaporation system has been developed to prepare cubic thin films In crystalline semiconductors. Zinc blonde CdSe epilayers were grown on GaAs(100) substrate by an e-beam evaporation method. The lattice parameter obtained from (400) reflection is $6.077\AA$, which is in excellent agreement with the value reported in the literature for zinc blonde CdSe. The orientation of the as-grown CdSe epilayer is determined by electron channeling patterns. The crystallinity of epitaxial CdSe layers were investigated on the double crystal X-ray rocking curve. The carrier concentration and mobility of epilayers deduced by Hall effect measurement are about $10^{18}{\textrm}{cm}^{-3}$, $10^2\textrm{cm}^2/V{\cdot}sec$ at room temperature, respectively. The photocurrent spectrum peak of the epilayer at 30 K exhibits a sharp change at 1.746 eV due to the free exciton of cubic CdSe.

• Computers and Concrete
• /
• v.31 no.4
• /
• pp.349-358
• /
• 2023

This paper describes an in-depth analysis on flexural strength of a girder-deck system experiencing a strand debonding damage with various strengthening systems, based on finite element software ABAQUS. A detailed finite element analysis (FEA) model was developed and verified against the relevant experimental data performed by other researchers. The proposed analytical model showed a good agreement with experimental data. Based on the verified FE model, over a hundred girder-deck systems were investigated with the consideration of following variables: 1) debonding level, 2) span-to-depth ratio (L/d), 3) strengthening type, 4) strengthening material thickness. Based on the data above, a new detailed analytical model was developed and proposed for estimating residual flexural strength of the strand-debonding damaged girder-deck system with strengthening systems. It was demonstrated that both finite element model and analysis model could be used to predict flexural behaviors for debonding damaged prestressed girder-deck systems. Since the strands are debonding from surrounding concrete over a certain zone over the length of the beam, the increase of strain in strands can be linked with a ratio ψ, which is L_p/c. The analytical model was proposed and developed regarding the ratio ψ. By conducting procedure of calculating ψ, the ψ value varies from 9.3 to 70.1. Multiple nonlinear regression analysis was performed in Software IBM SPSS Statistics 27.0.1 to derive equation of ψ. ψ equation was curved to be an exponential function, and the independent variable (X) is a linear function in terms of three variables of debonding level (λ), span length (L), and amount of strengthening material (A_s). The coefficient of determinate (R²) for curve fitting in nonlinear regression analysis is 0.8768. The developed analytical model was compared to the ultimate capacities computed by FEA model.

• Korean Journal of Agricultural Science
• /
• v.48 no.4
• /
• pp.1027-1037
• /
• 2021

This study aims to evaluate the performance of an electric multi-purpose cultivator through a simulation analysis. The simulation model was developed using commercial software, Simulation X, by applying the specifications of certain parts, such as an electric motor, a battery, and so on. The input parameter of the simulation was the engine load data according to the rotary tillage level using a conventional multi-purpose cultivator. The data were collected by configuring a load measurement system, and the load cycle was developed by repeating the data collection process under the most severe conditions. The average output engine torque values of conventional multi-purpose cultivator were 10.7, 13.0, 9.4, and 11.2 Nm in the D1P1, D1P2, D2P1, and D2P2 conditions, respectively. As a result of the simulation, the maximum values of the motor torque, rotational speed, and power of the electric multi-purpose cultivator were 16.8 Nm, 2,033.3 rpm, and 3.3 kW, respectively, and the motor was driven in sections within 70, 68, and 45% of the maximum output range. The rate of decrease of the battery state of charge (SOC) level per minute was approximately 0.6%, and it was possible to supply electric power to the motor for 9,550 sec. In the future study, research to verify and improve simulation models of electric multi-purpose cultivators should be conducted.

• Advances in nano research
• /
• v.15 no.1
• /
• pp.35-48
• /
• 2023

Nanoparticles are known for their outstanding properties such as particle size, surface area, optical and electrical properties. These properties have significantly boasted their applications in various surface phenomena. In this work, calcium oxide nanoparticles were synthesized from periwinkle shells as an approach towards waste management through resource recovery. The sol gel method was used for the synthesis. The nanoparticles were characterized using X-Ray diffractometer (XRD), Fourier Transformed Infra-Red Spectrophotometer (FTIR), Brunauer Emmett Teller (BET), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and ultra violet visible spectrophotometer (UV-visible). While DLS and SEM underestimate the particle diameter, the BET analysis reveals surface area of 138.998 m²/g, pore volume = 0.167 m³/g and pore diameter of 2.47 nm. The nanoparticles were also employed as an adsorbent for the purification of dye (methyl orange) contaminated water. The adsorbent showed excellent removal efficiency (up to 97 %) for the dye through the mechanism of physical adsorption. The adsorption of the dye fitted the Langmuir and Temkin models. Analysis of FTIR spectrum after adsorption complemented with computational chemistry modelling to reveal the imine nitrogen group as the site for the adsorption of the dye unto the nanomaterials. The synthesized nanomaterials have an average particle size of 24 nm, showed a unique XRD peak and is thermally and mechanically stable within the investigated temperature range (30 to 70 ℃).

• Journal of Microbiology and Biotechnology
• /
• v.33 no.9
• /
• pp.1238-1249
• /
• 2023

In this study, we sought to investigate the production and optimization of biosurfactants by soil fungi isolated from petroleum oil-contaminated soil in Saudi Arabia. Forty-four fungal isolates were isolated from ten petroleum oil-contaminated soil samples. All isolates were identified using the internal transcribed spacer (ITS) region, and biosurfactant screening showed that thirty-nine of the isolates were positive. Aspergillus niger SA1 was the highest biosurfactant producer, demonstrating surface tension, drop collapsing, oil displacement, and an emulsification index (E₂₄) of 35.8 mN/m, 0.55 cm, 6.7 cm, and 70%, respectively. This isolate was therefore selected for biosurfactant optimization using the Fit Group model. The biosurfactant yield was increased 1.22 times higher than in the nonoptimized medium (8.02 g/l) under conditions of pH 6, temperature 35℃, waste frying oil (5.5 g), agitation rate of 200 rpm, and an incubation period of 7 days. Model significance and fitness analysis had an RMSE score of 0.852 and a p-value of 0.0016. The biosurfactant activities were surface tension (35.8 mN/m), drop collapsing (0.7 cm), oil displacement (4.5 cm), and E₂₄ (65.0%). The time course of biosurfactant production was a growth-associated phase. The main outputs of the mathematical model for biomass yield were Yx/s (1.18), and µ_max (0.0306) for biosurfactant yield was Y_p/s (1.87) and Y_p/x (2.51); for waste frying oil consumption the So was 55 g/l, and Ke was 2.56. To verify the model's accuracy, percentage errors between biomass and biosurfactant yields were determined by experimental work and calculated using model equations. The average error of biomass yield was 2.68%, and the average error percentage of biosurfactant yield was 3.39%.

• Journal of the Korean Society of Radiology
• /
• v.83 no.1
• /
• pp.70-83
• /
• 2022

Acute coronary syndrome (ACS) is mainly caused by atherosclerotic coronary artery disease (CAD); however, it can also occur in patients with non-atherosclerotic CAD. Conventional coronary angiography only shows the lumen of arteries, indicating the presence of stenosis or dilatation. Thus, it has limited value in evaluating the coronary artery wall and offers low specificity for diagnosing CAD. Coronary CT angiography provides additional information, including the depiction of the concerned vessel and the aorta, as well as the pulmonary artery, which permits the diagnosis of non-atherosclerotic CAD and the differentiation of various causes of the disease. In this review, we present the pathophysiology and CT imaging features of non-atherosclerotic CAD.

• Journal of Preventive Medicine and Public Health
• /
• v.57 no.3
• /
• pp.223-233
• /
• 2024

Objectives: The coronavirus disease 2019 pandemic has exacerbated the rate of tuberculosis (TB) infection among close contacts of TB patients in remote regions. However, research on preventive behaviors, guided by the Health Belief Model (HBM), among household contacts of TB cases is scarce. This study aimed to employ the HBM as a framework to predict TB preventive behaviors among household contacts of TB patients in the border areas of Northern Thailand. Methods: A cross-sectional study with multi-stage random sampling was conducted in Chiang Rai Province. The study included 422 TB patients' household contacts aged 18 years or older who had available chest X-ray (CXR) results. A self-administered questionnaire was used to conduct the survey. Results: The participants' mean age was 42.93 years. Pearson correlation analysis showed that TB preventive behavior scores were significantly correlated with TB knowledge (r=0.397), perceived susceptibility (r=0.565), perceived severity (r=0.452), perceived benefits (r=0.581), self-efficacy (r=0.526), and cues to action (r=0.179). Binary logistic regression revealed that the modeled odds of having an abnormal CXR decreased by 30.0% for each 1-point score increase in preventive behavior (odds ratio, 0.70; 95% confidence interval, 0.61 to 0.79). Conclusions: HBM constructs were able to explain preventive behaviors among TB patients' household contacts. The HBM could be used in health promotion programs to improve TB preventive behaviors and avoid negative outcomes.

• Horticultural Science & Technology
• /
• v.34 no.2
• /
• pp.305-313
• /
• 2016

Brassica juncea (2n = 4x = 36, AABB genome, 1,068 Mb) is a U's triangle species and an amphidiploid derivative of B. rapa and B. nigra. Fifteen varieties were used to study the ITS (internal transcribed spacer) regions of ribosomal DNA and MITEs (miniature inverted-repeat transposable elements) with a view of developing specific molecular markers. ITSs and MITEs are an excellent resource for developing DNA markers for genomics and evolutionary studies because most of them are stably inherited and present in high copy numbers. The ITS (ITS1 and ITS2) sequence was compared with the consensus sequence of B. rapa and B. nigra. Variation in ITS1 created two separate groups among 15 varieties, with 10 varieties in one group and 5 in the other. Phylogenetic analysis revealed two major clusters for those 10 and 5 varieties. Among the 160 different MITE primers used to evaluate the selected 15 varieties of B. juncea, 70 were related to the Stowaway, 79 to the Tourist, 6 to the hAT, and 5 to the Mutator super-families of MITEs. Of 160 markers examined, 32 were found to be polymorphic when fifteen different varieties of B. juncea were evaluated. The variety 'Blackgat' was different from the other mustard varieties with respect to both phenotype and genotype. The diversity of 47 additional accessions could be verified using eight selected molecular markers derived from MITE family sequences. The polymorphic markers identified in this study can be used for varietal classification, variety protection, and other breeding purposes.