• 에너지공학
• /
• 제18권1호
• /
• pp.56-62
• /
• 2009

본 연구에서는 X65강의 용접부에 전기화학적 방법으로 수소를 장입한 이후에, 소형펀치시험편을 사용하여 기계적 강도를 평가하고 파면을 분석하였다. 모재부의 경우와는 다르게 용접부에서는 수소장입정도에 따라 강도저하가 민감하게 나타나는 거동을 보였다. 수소장입시 전류밀도, 온도, 장입시간의 변화에 따라 강도 및 연신율 등의 기계적 성질이 민감하게 변화하였다. 특히, 전류밀도가 높고 장입시간이 길어짐에 따라서 강도의 저하가 크게 나타났으나, 상대적으로 전해질 온도의 영향은 비교적 작게 나타났다. 또한 주사전자현미경을 통해 관찰한 시험편의 파면에서 수소침투된 표면근처의 재료에서 취성파면이 발견되었으며, 이는 강도의 저하 거동과 일치되는 경향이다. 수소취화 거동 평가 연구를 위해 본 연구에서 채택한 시험시스템은 재현성이 높게 나타나고 있으며, 이 방법을 이용한 재료의 강도평가 결과 매우 높은 신뢰성을 보이고 있다. 따라서 소형펀치시험과 전기분극법을 이용함으로써 X65강 용접부의 수소취화에 의한 강도변화를 민감하게 평가할 수 있었다. 산출된 데이터의 통계적인 처리를 통해 강도변화값을 예측할 수 있었음도 보였다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.401-407
• /
• 2004

This study is on the constant-current stress corrosion test related to the load stress in welded zone and non-welded zone of high tensile strength steel for natural gas transmission. The surface corrosion pattern of the welded zone of API 5L-X65 specimens for natural gas transmission showed global corrosion and narrow pitting, and the pitting was increased by increasing the load stress. Initially, the average relative electrode potential and the average relative current of the high tensile strength steel for natural gas transmission specimens was decreased suddenly, and the average relative electrode potential was higher and the average relative current was lower in welded zone than base metal. and the average relative electrode potential was decreased by increasing the load stress, and the average relative current was somewhat increased by increasing the load stress. The corrosion rate was less in welded zone than base metal, and the corrosion rate was decreased by increasing the load stress.

• 한국해양공학회지
• /
• 제18권5호
• /
• pp.50-56
• /
• 2004

This study is on the constant-current stress corrosion test, related to the load stress, in both the welded and non-welded zones of high tensile strength steel that is used for natural gas transmission. The surface corrosion pattern of the welded zone of API 5L-X65 specimens for natural gas transmission showed general corrosion and narrow pitting, and the pitting was increased with load stress. Initially, the average relative electrode potential and the average relative current of the high tensile strength steel, used for natural gas transmission specimens, were decreased rapidly, and the average relative electrode potential was higher and the average relative current was lower in welded zone, compared to base metal. The average relative electrode potential was decreased with load stress, and the average relative current was somewhat increased by increasing the load stress. The corrosion rate was less in welded zone, compared to base metal, and the corrosion rate was decreased by increasing the load stress.

• Corrosion Science and Technology
• /
• 제5권4호
• /
• pp.117-122
• /
• 2006

Hydrogen permeation measurements have been carried out on API X65 grade linepipe steel. In order to study the effect of steel microstructure on hydrogen diffusion behavior in linepipe steel, the accelerated cooling condition was applied and then three different kinds of microstructures were obtained. Hydrogen permeation measurement has been performed in reference to modified ISO17081 (2004) and ZIS Z3113 method. Hydrogen trapping parameters in these steels were evaluated in terms of the effective diffusivity ($D_{eff}$), permeability ($J_{ss}L$) and the amount of diffusible hydrogen. In this study, microstructures which affect both hydrogen trapping and diffusion were degenerated pearlite (DP), acicular ferrite (AF), bainite and martensite/austenite constituents (MA). The low $D_{eff}$ and $J_{ss}L$ mean that more hydrogen can be trapped reversibly or irreversibly and the corresponding steel microstructure is dominant hydrogen trapping site. The large amount of diffusible hydrogen means that corresponding steel microstructure is predominantly reversible. The results of this study suggest that the hydrogen trapping efficiency increases in the order of DP, bainite and AF, while AF is the most efficient reversible trap.

• Corrosion Science and Technology
• /
• 제19권2호
• /
• pp.57-65
• /
• 2020

As competition among global automakers intensifies, demand for materials that are better in price and performance is increasing. While steel and plastic materials compete for automotive fuel tanks, plastic materials have advantages such as light weight for automobiles. However, they have high prices. Accordingly, in this paper, four types of Zn-X plated steel sheets, electroplating (X = none, Sn) and galvannealed (X = Fe, Fe-Mg), were manufactured and their applicability as a fuel tank material was evaluated. Nano-composite coating solution with good conductivity was treated on the surface of plated steels using a roll coater and then cured through induction furnace to improve corrosion resistance. Quality characteristics such as corrosion resistance, fuel resistance to diverse gasoline and diesel fuels, and seam weldability were evaluated for the above plated steels. Their properties were compared and analyzed with conventional Zn-Ni electroplating steels. Among the above plated steels, Zn-Fe-Mg galvannealed steels coated with nano-composite coating exhibited better properties than other steels. Detailed experimental results suggest that evenly distributed Mg elements on the coating layer play a key role in the enhanced quality performance.

• 한국의학물리학회지:의학물리
• /
• 제9권3호
• /
• pp.137-141
• /
• 1998

납공 (lead ball)과 쇠공(steel ball)을 고에너지 광자선에 대한 차폐재로 이용하는 것이 가능한가를 평가하고 ,4～10MV 엑스선 차폐를 위한 납공과 쇠공의 물리자료를 구하는 것이 목적이다. 직경이 각각 2.0-2.5mm, 1.5-2.0mm 인 납공 및 쇠공을 폭이 균일한 아크릴 용기에 채워, 두께의 균일성 확인을 위해 MV 엑스선사진을 촬영하였으며, 금속공의 평균 밀도와 4～10MV 엑스선에 대한 선감쇠계수를 측정하였다. 선감쇠계수를 측정할 때 Farmer 이온함을 이용하였으며 산란선의 효과를 최소화하기 위해 70cm 거리에서 조사면크기는 5.5cm$\times$5.5cm로 하였다. 비교하기 위해 납판과 철판에 대해서도 같은 종류의 변수를 구하였다. 금속구를 용기에 채웠을 때 분포는 균일하였으며, 납 -공기 혼합물의 밀도는 6.93g/$cm^3$이었으며, 철-공기 혼합물의 밀도는 4.75g/$cm^3$ 이었다. 납의 밀도에 대한 납-공기 혼합물의 밀도의 비는 0.611, 철에 대한 철-공기 혼합물의 밀도의 비는 0.604이었다. 납-공기 혼합물의 반가층은 4MV, 6MV, 10MV 엑스선 각각에 대하여 1.89cm, 2.07cm, 2.16cm 이었으며 납판 반가층의 약 1.64배였다. 철-공기 혼합물의 반가층은 4MV, 6MV, 10MV 엑스선 각각에 대하여 3.24cm, 3.70cm, 4.15cm 이었으며 철판 반가 층의 약 1.65 배였다. 금속구는 용기속에 고르게 채워질 수 있기 때문에 차폐재료로 쓸 수 있다. 납공과 쇠공이 고르게 채워질 때 밀도는 각각 6.93g/$cm^3$, 4.75g/$cm^3$ 이었으며 각각의 반가층은 납 또는 철의 반가층의 1.65배였다. 밀도와 반가층을 곱한 값은 공이나 판에 대해 같은 값이었다.

• 한국가스학회지
• /
• 제5권3호
• /
• pp.15-22
• /
• 2001

세계적으로 천연가스의 사용은 높은 효율을 가진 청정에너지로서의 장점으로 인하여 꾸준히 증가하는 추세이며, 국내에서도 급격한 경제규모의 증대와 함께 사용량이 증가하고 있다. 천연가스 배관 용접부는 금속학적 및 역학적으로 파괴에 영향을 미치는 인자들을 다양하게 가지고 있는데, 이들 인자들에 의하여 파괴역학적 인성의 열화가 발생함과 동시에 파괴시험 결과의 해석에 많은 어려움이 유발된다. 본 연구에서는 우선 국내 천연가스의 주 배관으로 사용되고 있는 API 5L X65 등급의 고장력강 용접부의 파괴역학적 안전성을 평가하기 위한 목적으로, 실제 원주 용접부와 심 용접부의 파괴인성 시험을 수행하여 미세조직의 변화를 중심으로 미시적 혹은 거시적인 관점에서의 금속학적 인자가 파괴인성에 미치는 영향에 대해 평가하였다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2014년도 추계학술대회 논문집
• /
• pp.155-155
• /
• 2014

The oxide film was formed in hydrogen induced cracking (HIC) environment by potentio-dynamic method. Corrosion potentials and rates of the X-65 and X-80 line pipe steels were -0.3495 $V_{SHE}$, $2.833{\times}10^{-3}A/cm^2$ and 0.2716 $V_{SHE}$ and $2.533{\times}10^{-3}A/cm^2$, respectively. Surface composition analysis of the oxide film contained sulfur. Thermodynamic analysis of the HIC solution chemistry suggested that the oxide phase consisted of iron sulfate. Dynamic nano-indentation method applied to determine nano-hardnesses of the oxide film and base metal hardness.

• Corrosion Science and Technology
• /
• 제17권3호
• /
• pp.109-115
• /
• 2018

Electrical Resistance Welding (ERW) on a longitudinal seam-welded pipe has been extensively used in oil and gas pipelines. It is well known that the weld zone commonly suffers from grooving corrosion in ERW pipes. In this paper, the grooving corrosion performances of API X65 grade non-sour service (steel-A) and API X70 grade sour gas resistant (steel-B) steel electrical resistance welding pipelines were evaluated. The microstructure of the bondline is composed of coarse polygonal ferrite grains and several elongated pearlites. The elongated pattern is mainly concentrated in the center of the welded area. The grooving corrosion test and electrochemical polarization test were conducted to study the corrosion behavior of the given materials. A V-shaped corrosion groove was found at the center of the fusion zone in both the steel-A and steel-B ERW pipes, as the corrosion rate of the bondlines is higher than that of the base metal. Furthermore, the higher volume fraction of pearlite at the bondline was responsible for the higher corrosion rate at the bondline of both types of steel.

• Journal of Welding and Joining
• /
• 제30권6호
• /
• pp.6-9
• /
• 2012