• Title/Summary/Keyword: X5R

검색결과 2,388건 처리시간 0.034초

임신 중 체중변화와 임부 및 신생아 상태에 관한 연구 (The studies about the weight-changes during pregnancy and the condition of mother and infant)

  • 박광희
    • 부모자녀건강학회지
    • /
    • 제4권1호
    • /
    • pp.68-81
    • /
    • 2001
  • This research is to study about the weight-change of a pregnant woman, conditions of the woman and an infant. The weight-change of a mother during pregnancy was observed and that was expressed as the basis on the body mass index of a mother before pregnancy. The effects of weight-changes on both the discomfort, complications of pregnant mother and the condition of an infant were also investigated. Thus we set a purpose that this study would help pregnant woman and an infant to maintain and enhance their health conditions by proper weight control through nursing mediation. This study was performed in a certain hospital of university in seoul from Feb. 1. 2000 to Mar. 31. 2000. We explained the purpose of this study to the hospital institution and obtained consent of investigation. 152 inpatients who were in condition from PA 37 weeks to PA 42 weeks were the subject of this study. The research materials were made through of question paper that inpatients make answer by themselves and investigation paper. The question paper was about general background, weight and height before pregnancy and discomfort of the physical degree. And the investigation paper was about parity, maternal weight(late pregnancy), high pregnancy, delivery method, hemoglobin level, Apgar score, fetal weight. Physical discomfort was measured using the implement made by Kim hae won(1996) (chronbach's ${\alpha}=0.85$). SPSS was used to do statistics for managing and analyzing data. The results of this study were like followings. 1. The mean value of gained weight during pregnancy was about 13.8kg within from 3 kg to 26 kg. Among 152 research candidates, the gained weight of 80(52.6%) candidates remained within an ideal range. But that of 37 candidates(24.3%) became less than the ideal range. Also that of 35 candidates(23.0%) became over than the ideal range. 2. In the investigation of the relation between the weight change of a pregnant woman and her condition, the scores to represent physical discomfort were middle in all candidates. And the physical discomfort of over weight-gained group was more than that of low weight-gained group, but there was no difference in statistics(F=0.234, p=0.791). The weight-changes of pregnant woman didn't have an influence with the high risk of pregnancy(F=0.509, p=0.477). Also, the weight-changes didn't have an influence on delivery method($x^2=3.825$, p=0.148). However, in the investigation of the relation between weight-change and hemoglobin level, the change of hemoglobin level was highest in over weight gained group(F=3.062, p=0.05). 3. In the investigation of the weight-change of pregnant woman and the condition of infant. the weight changes didn't have an influence on both 1 min Apgar score(F=0.157, p=0.855) and 5 min Apgar score(F=0.030, p=0.970) of infant. Also, in the investigation of weight-change of a pregnant woman and weight difference of a infant with Pearson Correlation Coefficient, the weight-change of a pregnant woman affected vastly the weight of a infant. It was also found that the more pregnant woman gained in weight, the more did gain weighty infants. This relation was in net proportion(r=0.256, p=0.001). In conclusion, these results suggest that the weight-changes during pregnancy in Korea women of these days are more increased than that of the past days and individual variation in weight-changes is very high. Also, these results suggest that the changed hemoglobin level of a mother and weight of an infant were meaningfully affected by the weight-changes of a pregnant woman during pregnancy. However, the physical discomfort of a pregnant woman, the high risks of pregnancy, the delivery method and Apgar score of an infant were not affected by the weight-changes during pregnancy. Because the recommendation suggesting the ideal weight-change, used this study, is basis on the subject of American women, therefore, these results also suggest the necessity of such recommendation which is subject to Korean women.

  • PDF

Stellite bearings for liquid Zn-/Al-Systems with advanced chemical and physical properties by Mechanical Alloying and Standard-PM-Route

  • Zoz, H.;Benz, H.U.;Huettebraeucker, K.;Furken, L.;Ren, H.;Reichardt, R.
    • 한국분말야금학회:학술대회논문집
    • /
    • 한국분말야금학회 2000년도 춘계학술강연 및 발표대회 강연 및 발표논문 초록집
    • /
    • pp.9-10
    • /
    • 2000
  • An important business-field of world-wide steel-industry is the coating of thin metal-sheets with zinc, zinc-aluminum and aluminum based materials. These products mostly go into automotive industry. in particular for the car-body. into building and construction industry as well as household appliances. Due to mass-production, the processing is done in large continuously operating plants where the mostly cold-rolled metal-strip as the substrate is handled in coils up to 40 tons unwind before and rolled up again after passing the processing plant which includes cleaning, annealing, hot-dip galvanizing / aluminizing and chemical treatment. In the liquid Zn, Zn-AI, AI-Zn and AI-Si bathes a combined action of corrosion and wear under high temperature and high stress onto the transfer components (rolls) accounts for major economic losses. Most critical here are the bearing systems of these rolls operating in the liquid system. Rolls in liquid system can not be avoided as they are needed to transfer the steel-strip into and out of the crucible. Since several years, ceramic roller bearings are tested here [1.2], however, in particular due to uncontrollable Slag-impurities within the hot bath [3], slide bearings are still expected to be of a higher potential [4]. The today's state of the art is the application of slide bearings based on Stellite\ulcorneragainst Stellite which is in general a 50-60 wt% Co-matrix with incorporated Cr- and W-carbides and other composites. Indeed Stellite is used as the bearing-material as of it's chemical properties (does not go into solution), the physical properties in particular with poor lubricating properties are not satisfying at all. To increase the Sliding behavior in the bearing system, about 0.15-0.2 wt% of lead has been added into the hot-bath in the past. Due to environmental regulations. this had to be reduced dramatically_ This together with the heavily increasing production rates expressed by increased velocity of the substrate-steel-band up to 200 m/min and increased tractate power up to 10 tons in modern plants. leads to life times of the bearings of a few up to several days only. To improve this situation. the Mechanical Alloying (MA) TeChnique [5.6.7.8] is used to prOduce advanced Stellite-based bearing materials. A lubricating phase is introduced into Stellite-powder-material by MA, the composite-powder-particles are coated by High Energy Milling (HEM) in order to produce bearing-bushes of approximately 12 kg by Sintering, Liquid Phase Sintering (LPS) and Hot Isostatic Pressing (HIP). The chemical and physical behavior of samples as well as the bearing systems in the hot galvanizing / aluminizing plant are discussed. DependenCies like lubricant material and composite, LPS-binder and composite, particle shape and PM-route with respect to achievable density. (temperature--) shock-reSistibility and corrosive-wear behavior will be described. The materials are characterized by particle size analysis (laser diffraction), scanning electron microscopy and X-ray diffraction. corrosive-wear behavior is determined using a special cylinder-in-bush apparatus (CIBA) as well as field-test in real production condition. Part I of this work describes the initial testing phase where different sample materials are produced, characterized, consolidated and tested in the CIBA under a common AI-Zn-system. The results are discussed and the material-system for the large components to be produced for the field test in real production condition is decided. Outlook: Part II of this work will describe the field test in a hot-dip-galvanizing/aluminizing plant of the mechanically alloyed bearing bushes under aluminum-rich liquid metal. Alter testing, the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed. Part III of this project will describe a second initial testing phase where the won results of part 1+11 will be transferred to the AI-Si system. Part IV of this project will describe the field test in a hot-dip-aluminizing plant of the mechanically alloyed bearing bushes under aluminum liquid metal. After testing. the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed.

  • PDF

벼와 잡초(雜草)의 건물생산(乾物生産) 및 종자생산(鐘子生産) 특성(特性)에 따른 환경적응(環境適應) 전략(戰略) (Adaptation Strategy in Dry Matter and Seed Production of Rice and Weed Species)

  • 김순철
    • 한국잡초학회지
    • /
    • 제9권3호
    • /
    • pp.183-200
    • /
    • 1989
  • 1987년(年) 국제(國際) 미작연구소(米作硏究所)(IRRI)에서 벼와 잡초(雜草)의 건물생산(乾物生産) 및 종자(鐘子) 생산특성(生産特性)을 조사(調査)하여 이들 특성(特性)이 환경적응(環境適應) 전략(戰略)과의 관계(關係)를 구명(究明)하기 위해 벼 2품종(品種)과 논잡초(雜草) 7종(種)을 공시(供試)하여 시험(試驗)하였던 결과(結果)를 요약(要約)하면 다음과 같다. 환경적응(環境適應) 전략(戰略)은 잡초(雜草)에 따라 다르게 나타났으며, 대체(大體)로 종자생산(鐘子生産) 전략(戰略)이 가장 중요(重要)한 적응(適應) 전략(戰略)이었다. 방동산이 과(科) 잡초(雜草)인 바람하늘직이와 알방동산이는 높은 재생력(再生力)(Ratooning ability))과 낮은 상대개화(相對開花) 건물중(乾物重)(첫 개화시(開花時) 건물중(乾物重)/일생중(一生中) 최대(最大) 건물중(乾物重)${\times}$100))으로 대단(大斷)히 많은 종자(種子)를 효율적(效率的)으로 생산(生産)하였으며, 광엽잡초(廣葉雜草)인 물달개비와 여뀌바늘의 경우 높은 조형력((造形力)(Plasticity))과 낮은 상대개화건물중(相對開花乾物重)(물달개비), 또는 매우 높은 광합성(光合成) 효율(效率)(여뀌바늘)을 통(通)하여 많은 종자(種子)를 효율적(效率的)으로 생산(生産)하였고, 화본과(禾本科) 잡초(雜草)인 피 종류(種類)는 효율적(效率的)인 생장(生長)(순동화율(純同化率), 상대생장율(相對生長率))과 높은 Ratooning ability(Echinochloa glabrescens, 강피일종 및 Echinochloa colona, 돌피 일종) 또는 낮은 상대개화건물중(相對開花乾物重)(E. glabrescens)을 통(通)하여 효율적(效率的)인 종자생산(鐘子生産)을 하였다. 수확지수(收種指數)(Harvest index)는 벼에 비(比)해 잡초(雜草)가 전반적(全般的)으로 낮았고, 재생력(再生力)(Ratooning ability)은 바람하늘직이가 가장 높았고, 다음으로는 알방동산이, E. colona, E. glabrescens 순(順)이였다. 종자생산력(種子生産力)은 알방동산이(주당(株當) 약(約)279,000개(個))와 여뀌바늘(268,000개(個)/주(株)이 가장 높았고, 벼는 가장 낮은 종자생산력(種子生産力)을 보였다(1,300~6,100개(個)/주(株)). 그러나 종자(種子)무게는 종자수(種子數)와는 부(負)의 상관관계(相關關係)를 보였다(대수관계식(對數關係式)).

  • PDF

토모테라피를 이용한 뇌척수조사의 선량적 비교와 자세 재현성에 대한 고찰 (A study on dosimetric comparison of craniospinal irradiation using tomotherpy and reproducibility of position)

  • 이희정;김주호;이상규;윤종원;조정희
    • 대한방사선치료학회지
    • /
    • 제29권1호
    • /
    • pp.69-76
    • /
    • 2017
  • 목 적: 토모테라피를 이용한 뇌척수조사가 시행된 환자를 대상으로 선량적 비교와 자세 재현성 검증을 통하여 뇌척수 조사 시 토모테라피의 유용성을 확인하고자 하였다. 대상 및 방법: 뇌척수 조사가 시행된 환자 중 토모테라피를 이용한 환자 10명을 대상으로 분석하였다. 모든 환자에 대하여 치료 전 정도 관리를 시행하였고, 매 치료 전 두경부와 치료 후 골반부에서의 Megavoltage Computed Tomography(MVCT)를 촬영하여 자세 재현성을 확인하였다. 또한 체부 측정을 시행하여 두피 선량을 확인하였으며, 토모테라피 치료계획(CT 그룹, CSI-Tomo) 외에 동일 환자를 대상으로 기존 전형적인 뇌척수 조사기법(CC 그룹, CSI-Convention)을 계획하여 선량적 차이를 비교하였다. 결 과: 전뇌에 대한 V107, V95는 CT그룹에서 0 %, 97.2 %, CC 그룹에서는 0.3 %, 95.1 %를 나타내었다. 척수부위에서는 CT그룹에서 0.2 %, 89.6 %, CC그룹에서 18.6 %, 69.9 %로 조사되었다. 정상 장기의 경우 모든 장기에서 CT그룹이 낮은 선량을 유지하였으나, 폐와 신장에서는 낮은 선량이 조사되는 체적이 증가했다. 치료 자세에 대한 검증 결과 치료 후 촬영된 MVCT 영상에서 오차는 X축에서 최대 10.2 mm, Y축에서 -8.9 mm, Z축에서 -11.9 mm을 나타내었다. 두피 선량 측정 결과 처방선량 대비 평균 67.8 %의 선량이 측정되었으며 환자 별 정도 관리 결과는 점선량(<5 %)과 감마 분석(90 %> (r<1 3 %, 3 mm))의 모든 경우에서 만족하였다. 결 론: 토모테라피를 이용한 뇌척수조사는 전신에 낮은 선량이 조사되는 체적이 증가하면서 폐와 같은 장기에서의 위해도는 다소 증가하였으나 기존의 전형적인 치료 방법에 비해 종양부위에 충분한 선량을 주는 반면 주변 정상 장기에 높은 위해를 줄 수 있는 고선량을 낮게 조사하였다. 또한 자세 재현성의 결과 치료계획 시 산정했던 여유체적을 초과하지 않아 비교적 정확한 재현성을 유지하는 한편, 두피 선량 또한 낮게 조사되는 것으로 보아 토모테라피를 이용한 뇌척수 조사는 기존의 전형적인 치료 기법의 한계를 보완할 수 있는 방법으로 유용하리라 사료된다.

  • PDF

Mtwo 전동 파일을 사용한 single length technique과 crown-down technique의 근관성형 효율 비교 (Comparison of shaping ability between single length technique and crown-down technique using Mtwo rotary file)

  • 임유경;박정길;허복;김현철
    • Restorative Dentistry and Endodontics
    • /
    • 제32권4호
    • /
    • pp.385-396
    • /
    • 2007
  • 이 연구의 목적은 Mtwo 전동 파일의 사용에 있어서 제조사가 제안한 single length technique과 crown-down technique의 근관성형효율과 안전성을 비교하고 Mtwo 전동 파일의 변형된 사용방법을 제안하고자 하는 것이다. 기구의 종류와 사용방법에 따라 60개의 레진 블록 근관 모형 (Endo Training Bloc; Benstply Maillefer, Ballaigues, Switzerland)을 세 군으로 나누어 20개씩 표본을 성형하였다. MT군은 Mtwo 파일 (VDW, Munich, Germany)을 제조사의 추천방법인 single length technique으로, MC군은 Mtwo 파일을 crown-down technique으로 형성하였고, 대조군인 PT군은 ProTaper (Denstply Maillefer, Ballaigues, Switzerland)를 사용하였다. 모든 기구는 250 r.p.m., torque 2.2 N로 고정한 전동 모터 (X-smart; Denstply Maillefer, Ballaigues, Switzerland)로 사용하였다. 근관 성형 후, 스캐너로 근관 형성 전후의 이미지를 채득하여 중첩 비교함으로써 근단부로부터 1, 2, 3, 4, 5, 6, 7, 8 mm 높이에서의 중심변위율을 산출하였다. 순수 기구조작 시간 및 기구조작 동안의 binding빈도를 기록하였다. 근관 성형 후, 레진 블록의 무게 감소를 측정하였고 근관 성형에 사용된 파일의 파절이나 변형 및 근관 성형 후 형태의 이상을 조사하였다. 세 실험군의 측정 및 산출된 자료를 일원배치 분산분석 및 Duncan's Multiple Range Test로 사후 검정을 시행하여 비교하였으며, Fisher's exact test으로 근관의 이형성, 기구의 변형 그리고 기구 binding 등 발생 빈도를 유의 확률 95%에서 통계 검정하였다. 그 결과는 다음과 같다. 1. 근관의 만곡도 감소, 중심변위율, 레진 블록의 무게 감소, 기구 변형 등은 세 군간에 유의한 차이가 없었다 (p > 0.05). 2. 기구 조작 시간은 보면 MT군과 MC군이 PT군보다 짧았다 (p < 0.05). 3. Elbow는 MT군이 MC군에서 PT군보다 더 많이 형성되었다 (p < 0.05). Ledge는 세 군 모두에서 나타나지 않았다. 4. 파일 binding 횟수는 MC군이 가장 적고 PT군이 가장 많았다 (p < 0.05). 이상의 결과를 볼 때, Mtwo 전동 파일을 crown-down technique으로 사용하는 것이 single length technique과 유사한 성형 효율을 보이면서도 더 안전할 것으로 추정된다.

적조생물의 구제 -2. 황토에 의한 적조생물의 응집제거- (Removal of Red Tide Organisms -2. Flocculation of Red Tide Organisms by Using Loess-)

  • 김성재
    • 한국수산과학회지
    • /
    • 제33권5호
    • /
    • pp.455-462
    • /
    • 2000
  • 점증하는 적조로부터 수산피해를 줄이는 것은 시급한 문제이다. 황토를 살포하여 적조생물입자를 응집 제거하는 것이 하나의 방법이 되고 있다. 황토를 이용하여 적조생물입자에 대한 응집실험을 한 결과는 다음과 같다. 본 실험에 사용한 황토입자의 입도 분포는 정규분포를 보여주는 하나의 peak로 나타났으며, 입자의 평균 지름은 $25.0 {\mu}m$이고, 약$84.5{\%}$의 황토입자가 $9.8-55.0{\mu}m$의 범위에 속하며 변동계수는 $65.1{\%}$이었다. 황토의 금속성분을 분석한 결과는 규소 (Si)가 $48{\%}$, 알루미늄 (Al)이 $35{\%}$, 철 (Fe)이 $11{\%}$로서 $94{\%}$를 차지하며 나머지 $48{\%}$는 칼릅 (K), 구리 (Cu), 아연 (Zn), 티타늄 (Ti) 등으로 구성되어 있었다. 전자현미경 사진에 나타난 황토입자의 표면은 거칠고 다공질이며 부정형의 입자로 되어 있었다. 황토입자는 $10^(-3)M$ NaCl의 수용액 중에서 pH가 증가함에 따라 negative zeta potential 값이 증가하여 pH 9.36에서 -71.3mV를 나타내고 이후 거의 일정한 값을 나타내었으며, pH 1.98에서 +1.8 mV를 나타내어 amphoteric surface charge를 가지는 물질의 성질을 나타내었다. 전하결정이온은 $H^+, OH^-$ 이온이고, pH 2 부근에서 PZPC를 나타내었다. 용액의 전해질이 NaCl일 경우 $10^(-2)M (pNa=2)$ 이상의 농도에서는 $Na^+$ 이온의 농도가 증가함에 따라서 황토입자의 negative zeta potential 값은 일률적으로 감소하다가 $Na^+$ 이온의 농도가 1M (pNa=0)이 되었을 때 zeta potential은 0에 근접하였다. 용액의 전해질이 2 :l electrolyte ($CaCl_2$$MgCl_2$)의 경우 $Ca^(+2)$ 이온의 농도가 증가함에 따라서 황토입자의 negative zeta potential 값이 일률적으로 감소하다가 약 $10^(-3)M (pCa=3)$의 농도에서 등전점을 나타내고 전하역전이 일어났다. 해수중의 황토와 적조생물 입자는 비슷한 negative zeta potential을 나타내었고, 점토 중에서 해사가 가장 큰 negative zeta potential을 나타내었다. 해수중에서 황토입자와 적조생물입자의 EDL은 해수에 포함된 고농도의 염류 농도로 인하여 극히 얇게 압축되고, 이런 상태에서 두 입자가 상호 접근할 경우 모든 간격에서 LVDW attractive force의 절대값이 EDL repulsive force의 절대값보다 항상 큰 값을 나타낸다. 해수중에서 황토입자와 적조생물입자는 모든 간격에서 negative total interaction energy 값 (attractive force)을 나타내어 항상 용이하게 floe을 형성할 수밖에 없는 조건에 있다. 적조생물입자의 응집제거 효율은 황토의 농도가 증가함에 따라서 지수함수적 ($Y=36.04{\times}X^(0.11); R^2=0.9906$)으로 증가하였으며, 황토의 농도 800mg/l까지 급격한 증가를 보이다가 황토의 농도가 계속 증가함에 따라서 완만한 증가를 나타내었다. 적조생물은 황토 6,400mg/l에서 거의 $100{\%}$ 응집제거 되었다. 황토 800 mg/l을 사용하고 G-value를 $1, 6, 29, 139 sec^(-1)$로 단계적으로 증가시킴에 따라 응집제거 효율은 지수함수적으로 증가하였다. 이는 응집반응의 효율을 높이기 위해서는 황토입자와 적조생물입자 사이에 충분한 충돌이 일어날 수 있도록 교반하는 것이 매우 중요함을 나타내 주는 것이다. $800mg/l$의 농도에서 황토는 철을 함유하지 않은 다른 점토보다 $28.8{\~}60.3{\%}$ 더 높은 처리효율을 나타내었다. 황토에는 >SiOH의 음전하단과 수중의 phenolphthalein alkalinity를 소모하는 수화금속화합물의 양전하단이 공존하며, 이 수화금속화합물에 의하여 황토가 나머지 점토 특히 해사와 다른 응집특성을 보여주는 것으로 생각된다.

  • PDF

섬유용양마의 육종에 관한 연구 -단일반응성과 섬유종의 유전 및 연소 (Studies on the Breeding of the Response to short photoperiod, Fiber weight, and Qualitative characters and of the Associations Among these characters in Kenaf)

  • 박종문
    • 한국작물학회지
    • /
    • 제4권1호
    • /
    • pp.115-124
    • /
    • 1968
  • 1. 양마의 섬유중 단일반응성 엽형 경색 엽병색 삭과색에 관한 제형질에 대하여 개개의 질적형질의 유전 및 그들의 연소를 연구하였다. 량적형질의 유전은 통계유전학적방법을 이용하여 유전인자분석을 하였다. 또 이들 양적형질의 질적형질과의 연소 및 양적형질상호간의 연소를 조사하여 얻어진 지견을 응용하여 선발의 효과를 높이려고 하였다. 2. 본실험에는 양마의 품종 Dashkent, G38F-1의 1교잡을 사용하였다. Dshkent는 우리나라 재래품종으로 경색은 녹색이고 열핵엽형 녹색엽병색 개화일수는 10시간 단일처리하에서 106.9222일이고 호외 포장조건에서 105.8234일이었고 개체당 섬유중은 26.4922 gr였다. G38F-1은 Guatemala에서 도입하여 계통선발된 품종로서 적색경 수원엽형 적색엽병색 개화일수는 10시간단일처리하에서 62.3784일이고 호외포장조건에서 148.8921일였고 개체당 섬유중은 37.1591 gr.였다. 본교잡에 사용된 실험재료는 P, $P_2$, $F_2$, $F_2$, $BC_1$,($F_2$ ${\times}$ Dashkent), $BC_2$($F_2$ ${\times}$ G38F-1)의 각집단이며 1965년 수원작물시험장 포장에 재식하였다. 3. 엽형 엽병색 경색 삭과색 등 제형질의 유전은 수원엽형 녹색엽병 녹색경 녹색삭과등의 제인자가 단인자로서 그의 대립형질인 열각엽형 적색엽병 적색경 황색삭과에 대하여 각각 열성으로서 3:1의 Mendel성단순분리비를 나타내었다. 또 $F_1$과 열성형질과의 여교잡은 각각 1:1의 분리비가 인정되었다. 엽병색(G)과 엽형유전자(L)와의 조환가는 11.9565의 상인연소현상을 보였다. 삭과색(Y) 경색(R) 유전자간에는 어느것이나 연소현상이 보이지 않았다. 4. 단일반응성의 변이는 연소적이며 우성은 거의 인정되지 않았고 인자간의 상호작용도 인정되지 않았으며 상가적 유전을 보였다. 광의와 협의의 유전력은 각각 89.50%로서 실용적으로 대단히 높은 것으로 생각되었으며 단일반응성에 관여하는 유전자수는 2대의 인자로 추정하였고 다시 양친의 유전자형을 aabb AABB라고 측정하여 각인자의 작용가는 11.136일로 산출되었고 분해법에 의한 유전분석결과 유전자형의 관찰빈도분포와 이론빈도분포는 서로 잘 적합되었다. 단일반응성에 있어서 유전력이 대단히 높았으므로 비교적 초기세대에서 본 형질의 선발이 가능할 것 같았다. 5. 단일반응성과 엽형 및 엽병색 유전자와의 사이에 $F_2$, $BC_1$$BC_2$에서 각각 유의적인 상관관계를 볼 수 있었으므로 이들 형질간에 연소가 있는 것으로 인정되었다. 더욱 엽형과 엽병색과의 연소가 있는 것으로 인정되는 이상단일반응성 유전자와의 사이에 연소군이 인정된다. 6. 섬유중 유전자와 엽병색 및 엽형유전자와의 사이에 $F_2$$BC_1$$BC_2$에서 각각 유의적 상관관계를 볼 수 있었으므로 이를 형질간에 연소가 있는 것으로 인정되었다. 더욱 엽형과 엽병색과의 연소가 있는 것으로 인정되는 이상 섬유중 유전자와의 사이에 연소군이 인정된다. 7. 경장 경경 개화일수와 주당섬유중의 유전상관과 표현형상관에 있어서 전반적으로 표현형상관보다도 유전상관의 절대치가 크게되는 경향을 나타내었으며 식물체의 크기에 가장 밀접한 관계가 있는 경장 개화일수와 섬유중 형질상호간의 상관이 높은 치를 보였다. 8. 이상의 유전분석 결과 엽형 및 엽병색과 단일반응성경장 섬유중 형질간에는 연소 혹은 다면발현(pleiotropic effect)이 관여하는 것으로 이해하드라도 대과없는 것으로 생각되었고 양마에 있어서 고섬유중을 위한 선발은 엽병색 및 경장의 선발과 엽형 및 개화일수로서 선발을 함께 하면 그 효율이 높아질 것으로 믿어졌다.

  • PDF

산욕초기 초산모의 간호목표달성방번 합의가 어머니 역할수행에 대한 자신감 및 만족도에 미치는 영향에 관한 실험적 연구 (An experimental study on the impact of an agreement on the means to achieve nursing goals in the early postpartum period of primiparous mothers and enhance their self-confidence and satisfaction in maternal role performance)

  • 이영은
    • 대한간호학회지
    • /
    • 제22권1호
    • /
    • pp.81-115
    • /
    • 1992
  • The problem addressed by this study was to determine the effect of nurse - patient agreement on the means to achieve nursing goals in the early postpartum period of primiparous mothers. It was hypothesized that the experimental treatment would result in hegher self-confidence and satisfaction in maternal role performance. This purpose was to contribute to the planning of nursing care to enhance self- confidence and satisfaction in maternal role performance and to the development of relevant nursing theory. Especially, the early postpartum period is crucial toward in recovery from childbirth and attainment of the maternal role. Maternal role attaintment is a complex social and cognitive process of stimulus -response accomplished by learning. Most women attain the maternal role sucessfully. But, some primiparous mothers experience difficultites in attainment of the maternal role due to lack of experience and knowledge. Self-confidence and satisfaction in maternal role performance are important factors in attainment and adjustment to the maternal role (Mercer, 1981a, 1981b ; Lederman, Weigarten, and Lederman, 1981 :Bobak and Jensen, 1985). Nursing is defined as behaviors of nurses add patients that attain nursing goals through action, reaction, interaction, and transaction. For attainment of nursing goals, active participating transactions must occur by agreement on the means to achieve those goals through nurse -patient mutual goal setting and establishment of their active relationships(King, 1981, Ha, 1977). Based on King's theory of goal attainment (1981), this stuy was planned as a non-equivalent control group, non -synchronized quasi -experimental design using agreement on the means to achieve nursing goals in early postpartum as the experimental treatment. The data were collected from July 20 to Sep. 1, 1991 by questionnaires with 60 primiparous mothers planing to breast feed after normal deliveries at W hospital in Pusan, Korea. The subjects were divided into a control group(conventional group) -those admitted from July 20 to Aug. 12, and an experimental group(agreement group) - those admitted from Aug. 13 to Sep. 1. The instument for agreement on the means to nursing goals in the early postpartum period included five steps - identification of disturbances of problems through action, reaction, and interaction with primiparous mothers : mutual early postpartal nursing goal setting : exploration of the means to achieve goals ; agreement on the means (self- care, ealry maternal -infant contact, performance of mothering behavior, and communicating about the infant's behavior and health condition) : implementation of the means. This instrument was developed on the basis of King's elements that lead to transactions in nurse-patient interactions. Lederman et al's (1981) scale for Confidence in ability to cope with tasks of motherhood and Lederman et al's(1981) scale for Mother's satisfaction with motherhood and infant care were used to measure self-confidence and satisfaction in maternal role performance ·with the subjects immediately after admission and on the day of discharge. Self-care performance in the experimental group was measured by self -evaluation tool developed by the investigator from the literature concerned. The tools to measure Pelf-confidence and satisfaction in maternal role performance, and the tool to measure self-evaluation of self-care performance were tested for internal reliability. Cronbach's Alphas were 0.94, 0.94, and 0.63. The data were analysed by using in S.P.S.S. computerized program and included percentage, x²-test, t-test, ANOVA, and Pearson Correlation Coefficient. The conclusions obtained from this study are summerized as follows : 1. The degree of self-confidence in maternal role performance of the total subjects group measured before the experimental treatment was above average with a mean score of 2.77(range 2.14-3.64). Out of 14 items, those with relatively high mean scores were ‘I would like to be a better mother than I am’(3.95), and ‘I have my doubts about whether I am a good mother’(2.87). Those with low mean scores were ‘I know that my baby wants most of the times’(2.28), ‘When the baby cries, I can tell what she /he wants’(2.37), and ‘I have confidence in my ability to care for the baby’(2;50). That is, the self - confidence of Primiparous mothers was considerably high in mothering, but rather low in activities concerning the infant care and understanding of the infant behavior. The degree of satisfaction in maternal role performance of the total subjects group measured before the experimental treatment was high with a mean score of 3.18(range 1.92-3.92). Out of 13 items, those with relatively high mean scores were ‘I am glad 1 had this baby now’(3.75), ‘I play with the baby between feedings when s/he is awake and quiet’(3.67), and ‘I enjoy being a mother’(3.27). Those with low mean scores were ‘I am upset about having too many responsibilities as a mother’(2.78), ‘It bothers me to get up for the baby at night’(2.82), and ‘I get annoyed if the baby frequently interrupts my activities’.(2.82), That is, the satisfaction of primiparous mothers was considerably high in mothering and infant care, but rather low in restraints in time or on the mother's self accomplishment and development. 2. Agreement on the means to achieve nursing goals in the early postpartum period included process of mutual goal setting, exploration of the means to achieve goals, and ahreement in concert means to achieve goals based on the mothers' condition, concerns, self-perception of the nurse - patient interactions. In the process of agreement, there was agreement that the means to achieve goals should be through trust and establishment of active relationships with the nurse through identification of problems according to planned nursing goals and active interaction, such as explanations, teaching, changing of opinions, acceptance or rejection of explanations, and proposing of questions. Therefore agreement on the means to achieve nursing goals in the early postpartum period appears to be an effective nursing intervention for primiparous mothers. 3. The degree of self- confidence in maternal role performance of the exprimental group was higher than that of the control group(t=3.95, p<0.01). Out of 14 items, those with higher score in the experimental group were ‘I would like to be a better mother than I am’(t=1.93, p<0.05), ‘I know that my baby wants most of the times’(t=2.75, p<0.01), ‘When the baby cries, 1 can tell what she/he wants’(t=2.10, p<0.05), ‘I have confidence in my ability to care for the baby’(t=3.72, p<0.01), ‘I trust my own judement in deciding how to care for the baby’(t=1.96, p<0.05), ‘I feel that I know my baby and what to do for him /her’(t=2.44, p<0.01), ‘I am concerned about being able to meet the baby's needs’(t=2.87, p<0.01), ‘I know what my baby likes and dislikes’(t=3.26, p<0.01), ‘I don't know to care for the baby as well as I should’(t=2.07, p<0.05), and ‘I am unsure about whether I give enough attention to the baby’(t=3.04, p<0.01), That is, the degree of self-confidence in mothering, activities concerning infant care, and understanding of infant behavior of the experimental group was higher than that of the control group. Therefore, the first hypothesis, that the degree of self-confidence in maternal role performance of the experimental group would be higher than that of the control group, was supported(t=3.95, p<0.01). 4. The degree of satisfaction in the maternal role performance of the exprimental group was higer than that or the control group(t=2.31, p<0.05). Out of 13 items, those with higher score in the experimental group were ‘I am glad I had this baby now’(t=2.29, p<0.05), ‘I enjoy taking care of the baby’(t=2.4g, p<0.01), ‘It is boring for me to care for the baby and do the same thing over and over’(t=2.87, P<0.01), ‘I am unhappy with the amount of time I have for activities other than childcare’(t=2.51, p<0.01), and ‘When bathing and diapering the baby, I would like to be doing something else’(t=2.43, p<0.01). That is, the degree of satisfaction in mothering, infant care, and restraints in time of on the mother's self accomplishment and development in the experimental group was higher than that of the control group. Therefore, the second hypothesis, that the degree of satisfaction in maternal role performance of the experimental group would be higher than that of the control group, was supported(t=2.31, p<0.05). 5. The third hypothesis, that the higher the degree of satisfaction in materenal role performance, the higher the degree of self-confidence in materenal role performance in the experimental group, was supported (r=0.57, p<0.01)

  • PDF