• 제목/요약/키워드: X4M03

검색결과 111건 처리시간 0.032초

Effects of Aspergillus Oryzae Culture and 2-Hydroxy-4-(Methylthio)-Butanoic Acid on In vitro Rumen Fermentation and Microbial Populations between Different Roughage Sources

  • Sun, H.;Wu, Y.M.;Wang, Y.M.;Liu, J.X.;Myung, K.H.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제27권9호
    • /
    • pp.1285-1292
    • /
    • 2014
  • An in vitro experiment was conducted to evaluate the effects of Aspergillus oryzae culture (AOC) and 2-hydroxy-4-(methylthio)-butanoic acid (HMB) on rumen fermentation and microbial populations between different roughage sources. Two roughage sources (Chinese wild rye [CWR] vs corn silage [CS]) were assigned in a $2{\times}3$ factorial arrangement with HMB (0 or 15 mg) and AOC (0, 3, or 6 mg). Gas production (GP), microbial protein (MCP) and total volatile fatty acid (VFA) were increased in response to addition of HMB and AOC (p<0.01) for the two roughages. The HMB and AOC showed inconsistent effects on ammonia-N with different substrates. For CWR, neither HMB nor AOC had significant effect on molar proportion of individual VFA. For CS, acetate was increased (p = 0.02) and butyrate was decreased (p<0.01) by adding HMB and AOC. Increase of propionate was only occurred with AOC (p<0.01). Populations of protozoa ($p{\leq}0.03$) and fungi ($p{\leq}0.02$) of CWR were differently influenced by HMB and AOC. Percentages of F. succinogenes, R. albus, and R. flavefaciens (p<0.01) increased when AOC was added to CWR. For CS, HMB decreased the protozoa population (p = 0.01) and increased the populations of F. succinogenes and R. albus ($p{\leq}0.03$). Populations of fungi, F. succinogenes (p = 0.02) and R. flavefacien (p = 0.03) were increased by adding AOC. The HMB${\times}$AOC interactions were noted in MCP, fungi and R. flavefacien for CWR and GP, ammonia-N, MCP, total VFA, propionate, acetate/propionate (A/P) and R. albus for CS. It is inferred that addition of HMB and AOC could influence rumen fermentation of forages by increasing the number of rumen microbes.

동해 실시간 해양관측 부이로부터 관측한 태풍 매미에 대한 연안해양의 반응 고찰 (Observations on the Coastal Ocean Response to Typhoon Maemi at the East Sea Real-time Ocean Buoy)

  • 남성현;윤재열;김구
    • 한국해양학회지:바다
    • /
    • 제9권3호
    • /
    • pp.111-118
    • /
    • 2004
  • 한국 동해시에서 약 10 km떨어진 수심 130 m해역에 실시간 동해 해양관측 부이를 계류하여 기상(기온, 기압, 풍속, 순간최대풍속, 풍향, 상대습도) 및 해양(파랑, 해수물성, 전층해류) 자료를 실시간으로 수집하였다. 2003년 9월 13일 03:00에 태풍 매미의 눈이 한국 울진시 부근을 통과할 때, 순간최대풍속은 25 m/s(10분 평균풍속은 최대 20 m/s) 그리고 최저기압은 980 hPa로 기록되었다. 파고는 이로부터 한 시간 뒤인 04:00에 최대가 되었으며 유의파고는 4 m 그리고 최대파고는 9 m에 이르렀다. 표층부근에서 측정된 유속은 태풍의 눈이 통과한 뒤 점차 증가하여 약10시간 뒤인 13:00에는 약 100 cm/s에 달하였고 그 방향은 남남동이었다. 강한 남남동향류를 동반한 표층혼합층은 고온저염의 특성을 유지하였으며, 그 두께는 같은 10시간동안 20 m에서 40 m로 서서히 증가하였다. 일정경사면의 해저지형을 가지는 해양에서 해안선방향의 순간 바람에 대한 이층유체의 반응을 알아보기 위해 Csanady(1984)가 제안한 간단한 해석모형을 적용하였다. 그 결과 실시간 해양관측부이의 계류 위치(x=8.15 km)에서 태풍의 눈 통과 후 10시간동안 전개된 해안선 방향과 이에 수직한 방향의 유속구조와 상하층의 경계에 대한 적절한 추정치를 얻을 수 있었고, 태풍 매미 통과 후 동해시 연안해양의 특징적인 반응을 부분적으로 설명할 수 있었다.

PET/CT 3D 영상에서 감쇠보정 위치 변화 방법을 이용한 영상 재구성법의 평가 (The Evaluation of Reconstruction Method Using Attenuation Correction Position Shifting in 3D PET/CT)

  • 홍건철;박선명;정은경;최춘기;석재동
    • 핵의학기술
    • /
    • 제14권2호
    • /
    • pp.172-176
    • /
    • 2010
  • PET/CT 검사에서 발생하는 환자의 움직임은 감쇠보정의 불일치를 초래하여 정량평가에 영향을 주게 되어 결과의 정확도를 저하시키게 된다. 본 연구에서는 PET/CT 3D 영상촬영에서 투과촬영 후 방출촬영의 위치변화에 따른 감쇠보정 불일치 시 감쇠보정 위치 변화 방법을 이용한 영상재구성법의 유용성에 대하여 평가하였다. GE Discovery STE16 장비에 스티로폼($20{\times}20{\times}10$ cm)의 중심점을 기준으로 x, y축 방향으로 ${\pm}2$, 6, 10 cm까지 1 mL 주사기 삽입 공간을 제작하였다. $^{18}F$-FDG 5 kBq/mL의 주사기를 중심점에서 투과촬영한 후 위치를 변화하여 방출촬영하고 위치 변화에 따른 감쇠보정 방법을 사용하여 영상을 얻었다. 재구성 방법은 반복영상 재구성법으로 반복횟수 2회, 부분집합 수 20을 적용하였으며 모든 방출촬영 데이터는 시간경과에 따른 붕괴보정을 적용하였다. 또한 주사기 위치에 관심영역을 설정한 후 방사능 값(kBq/mL)과 중심점에 대한 각 위치에서의 백분율 오차를 비교하였다. 방출영상의 중심점의 방사능 값은 2.30 kBq/mL이며, +x축 1.95, 1.82, 1.75 kBq/mL, -x축 2.07, 1.75, 1.65 kBq/mL, +y축 2.07, 1.87, 1.90 kBq/mL, -y축 2.17, 1.85, 1.67 kBq/mL로 나타났고, 백분율 오차는 +x축 15, 20, 23%, -x축 9, 23, 28%, +y축 12, 21, 20%, -y축 8, 22, 29%로 산출 되었다. 그리고 방출 영상에서 감쇠보정 위치변화 방법을 사용 하였을 경우 +x축 2.00, 1.95, 1.80 kBq/mL, -x축 2.25, 2.15, 1.90 kBq/mL, +y축 2.07, 1.90, 1.90 kBq/mL, -y축 2.10, 2.02, 1.72 kBq/mL로 나타났으며, 백분율 오차는 +x축 13, 15, 21%, -x축 2, 6, 17%, +y축 9, 17, 17%, -y축 8, 12, 25%로 산출 되었다. 감쇠보정 불일치 시 감쇠보정 위치변화 방법을 사용한 경우의 방사능 농도 값은 x, y축에서 평균 0.14, 0.03 kBq/mL 증가 하였고, 백분율 오차는 6.1, 4.2% 향상되었다. 또한 중심으로부터 멀어질수록 공간분해능이 저하되는 특성상 중심에서 먼 위치일수록 방사능 값의 저하현상은 커짐을 알 수 있었다. 그러나 실제 임상에서는 감약 정도가 더 커지기 때문에 이러한 불일치 시 그 오차는 더 클 것으로 사료된다. 따라서 감쇠보정이 일치하지 않는 부분의 병변에서는 감쇠보정 위치변화 방법을 적용하여 방사능 값의 오차를 감소시킬수 있을 것이다.

  • PDF

레이더 센서와 표준편차를 이용한 거리 측정 방법 (Distance measurement using a radar sensor and standard deviation)

  • 정동훈;장시웅
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2018년도 춘계학술대회
    • /
    • pp.220-223
    • /
    • 2018
  • 스마트폰의 GPS 기능으로 위치 정보를 수집하여 사용자에게 서비스를 제공하는 시스템이 많아지고 있다. 이러한 GPS 기능은 위성에서 송신된 신호로 위도와 경도를 측정하여 위치를 계산한다. 하지만, 이러한 기능은 사용자가 실외에 있을 경우에만 사용이 가능한 것으로, 실내에서는 사용이 불가능하다는 단점이 있다. 최근 상용화 되고 있는 UWB 레이더 센서는 실내외에서 사용이 가능하고, 객체 탐지 및 거리측정이 간단함과 동시에 저렴하다는 장점이 있다. 본 논문에서는 UWB 레이더 센서와 표준편차를 이용하여 거리 측정 방법을 제시하고자 한다. 제시하고 있는 방법은 레이더 센서에서 나오는 raw data를 그래프화 하여 최대 탐지 거리가 몇 m 인지 파악하고, 파악된 최대 감지 거리를 일정 구간으로 나누어 구간별 거리를 측정한다. 그 후 표준편차 공식을 이용하여 객체의 유무를 판단한다. 실험 결과에서는 제시하는 방법으로 최대 거리 9.7m에서 최대 오차 0.27m 이내로 측정되는 것을 확인하였다.

  • PDF

Microwave Sol-Gel Process for Microcystalline Ho3+/Yb3+/Tm3+ Tri-Doped NaY(WO4)2 Phosphors and Their Upconversion Photoluminescence Properties

  • Lim, Chang Sung
    • 한국재료학회지
    • /
    • 제26권12호
    • /
    • pp.757-763
    • /
    • 2016
  • $Ho^{3+}/Yb^{3+}/Tm^{3+}$ tri-doped $NaY_{1-x}(WO_4)_2$ phosphors with proper doping concentrations of $Ho^{3+}$, $Yb^{3+}$ and $Tm^{3+}$ ($x=Ho^{3+}+Yb^{3+}+Tm^{3+}$, $Ho^{3+}$=0.04, 0.03, 0.02, 0.01, $Yb^{3+}$=0.35, 0.40, 0.45, 0.50 and $Tm^{3+}$=0.01, 0.02, 0.03, 0.04) were successfully synthesized via the microwave sol-gel route, and their upconversion properties were investigated. Well-crystallized microcrystalline particles showed fine and homogeneous microcrystalline morphology with particle sizes of $1-2{\mu}m$. The optical properties were comparatively examined using photoluminescence emission and Raman spectroscopy. Under excitation at 980 nm, the doped particles exhibited white emissions based on blue, green and red emission bands, which correspond to the $^1G_4{\rightarrow}^3H_6$ transitions of $Tm^{3+}$ in the blue region, the $^5S_2/^5F_4{\rightarrow}^5I_8$ transitions of $Ho^{3+}$ in the green region, the $^5F_5{\rightarrow}^5I_8$ transitions of $Ho^{3+}$, and the $^1G_4{\rightarrow}^3F_4$ and $^3H_4{\rightarrow}^3H_6$ transitions of $Tm^{3+}$ in the red region. The pump power dependence of the upconversion emission intensity and the Commission Internationale de L'Eclairage chromaticity coordinates of the phosphors were evaluated in detail.

졸참나무 지재(枝材) 섬유(纖維)에 관한 연구(硏究) (A Study on Branchwood Fiber of Quercus serrata Thunb.)

  • 이필우;엄영근
    • 한국산림과학회지
    • /
    • 제60권1호
    • /
    • pp.45-50
    • /
    • 1983
  • 1970년(年) 이래(以來) 원자재(原資材)의 감소(減少)와 목재(木材)의 수요(需要)가 증가(增加)함에 따라 원료재(原料材)의 효율적(效率的) 이용(利用)이 국내외적(國內外的)으로 요청(要請)되고 있다. 따라서 본고(本稿)에서는 전수체(全樹體)를 이용(利用)한다는 면(面)에서 졸참나무(Quercus serrata Thunb.) 지재(枝材)에 관(關)한 특성(特性) 연구(硏究)의 한 방안(方案)으로 주요구성요소(主要構成要素)인 fiber의 dimension에 관한 것을 다루었으며, 수체내(樹體內)에서 지재개체(枝材個體), 부분(部分) 및 위치(位置)에 따라서 섬유장(纖維長), 폭(幅) 그리고 막후(膜厚)를 측정(測定)하고 분석(分析)하였다. 본(本) 연구(硏究)에서 얻은 결과(結果)는 다음과 같다. 1) 지재개체(枝材個體)의 높이가 지상(地上)에서 수고방향(樹高方向)으로 증가(增加)함에 따라 섬유장(纖維長), 폭(幅) 그리고 막후(膜厚)는 직선적(直線的)으로 감소(減少)함을 나타냈으며 이들의 회귀식(回歸式)은 각기 Y=770.03-22.643X, Y=27.444-0.71385X 및 Y=12.308-0.57320X였다. 2) 지재내(枝材內)에서 수간(樹幹)에 인접한 부위(部位)로부터 가지의 끝으로 이행(移行)하여 감에 따라 섬유장(纖維長), 폭(幅) 그리고 막후(膜厚)는 일차적(一次的)인 직선관계(直線關係)로 감소(減少)함을 보였으며 이들의 회귀식(回歸式)은 각각(各各) Y=752.70-0.6724X, Y=26.152-0.0084867X 및 Y=11.258-0.006205X 였다. 3) 연령(年齡)에 따라, 즉 수(髓)로부터 수피방향(樹皮方向)으로, 섬유장(纖維長), 폭(幅) 그리고 막후(膜厚)의 변이(變異)는 점차로 증가(增加)함이 직선(直線)으로 나타났으며 그 회귀식(回歸式)은 각각 Y=679.73+11.231X, Y=25.382+0.0925X 및 Y=10.521+0.11787X 였다. 4) 각(各) 기재개체간(技材個體間)의 섬유장(纖維長), 폭(幅) 그리고 막후(膜厚)는 각각 $625{\sim}765{\mu}m$, $26{\mu}m$$11{\mu}m$ 에서 가장 많은 분포량(分布量)을 나타냈다.

  • PDF

Digital Radiography(DR)에서 검출기의 X선 조건에 따른 흡수선량 및 영상화질 변화에 관한 연구 (Study on the Change of Absorbed Dose and Image Quality according to X-ray Condition of Detector in Digital Radiography(DR))

  • 황준호;정재호;김현수;이경배
    • 한국콘텐츠학회논문지
    • /
    • 제17권9호
    • /
    • pp.99-106
    • /
    • 2017
  • 본 연구는 진단용 검출기가 결함이 발생하는 경우 환자의 방사선 피폭과 영상의 화질에 영향을 줄 수 있다는 점에 착안하여 실험을 진행하였고 선량분석을 통해 검출기 성능을 신호 대 잡음비와 대조도 대 잡음비로 평가하였다. 선량계, 조직등가팬텀을 이용해 흡수선량과 신호 대 잡음비, 대조도 대 잡음비를 측정하였다. 실험방법은 팬텀 후면에 부착하여 나온 선량 값과 검출기 뒤에 부착한 선량 값이 일치하는지를 비교하였고 두개부 흉부 복부의 조건을 각각 75 kVp 25 mAs, 110 kVp에 8 mAs, 80 kVp에 20mAs로 설정하고 검사하였다. 그 결과 검출기의 뒤쪽에 부착한 선량값은 0.004 mGy, 0.006 mGy, 0.003 mGy로 나타났고, 팬텀 후면은 0.006 mGy, 0.016 mGy, 0.017 mGy로 차이가 있었다. 두 값을 일치시키기 위해서 조건이 증가하였고 신호 대 잡음비와 대조도 대 잡음비는 88.32, 88.10, 4.09, 1.63, 87.94, 79.97에서 93.87, 93.75, 4.91, 4.03, 92.02, 84.92로 증가하였다. 본 연구를 통해 검출기가 노후화 되는 경우 기기의 수명단축과 환자의 선량증가의 원인이 되었으며 또한 영상화질의 개선효과도 미비하다는 것을 알 수 있었다.

A design of transmission-type multi-target X-ray tube based on electric field modulation

  • Zhao, Lei;Jia, Wenbao;Jin, Limin;Shan, Qing;Cheng, Can;Zhu, Hongkui;Hei, Daqian
    • Nuclear Engineering and Technology
    • /
    • 제53권9호
    • /
    • pp.3026-3034
    • /
    • 2021
  • Multi-target X-ray tube is a new type X-ray source, and can be applied in many fields such as sensitive X-ray fluorescence analysis and medical imaging. In this work, we report an electric field modulation multi-target X-ray tube, which contains four targets (Cr, Ni, Au, Mo) coated on a Beryllium (Be) window. A four-valve electric field deflector was developed to deflect the electron beam to bombard the corresponding targets. Particle dynamics analysis software was employed to simulate the particle tracking of electron beam. The results show that the 30 keV electron beam could get a 6.7 mm displacement on the target plane by 105 V/m electric field. The focus areas are about 2 mm × 5 mm and 4 mm × 2.5 mm after deflection in two directions. Thermal behavior calculated by ANSYS shows that the designed target assembly could withstand a 10 W continuous power. The optimum target thicknesses and emission spectra were obtained by Geant4 when the thickness of Be window was 300 mm and the electron beam incident angle was 0.141 rad. The results indicate that this multi-target X-ray tube could provide different X-ray sources effectively.

조피볼락, Sebastes schlegeli의 초기성장에 관한 연구 (Studies on the Early Growth of Rockfish, Sebastes schlegeli)

  • 현충훈;노섬
    • 한국양식학회지
    • /
    • 제9권1호
    • /
    • pp.25-42
    • /
    • 1996
  • 조피볼락, Sebastes schlegeli의 초기성장에 적합한 먹이계열과 사육밀도에 따른 성장을 파악하기 위한 초기의 지수식에 있어서의 먹이계열 시험과 폐쇄순환여과식 사육장치에서 4단계의 밀도(A시험구 : 1.8 $kg/m^3$, B : 4.0 $kg/m^3$, C : 5.0 $kg/m^3$, D : 6.2 $kg/m^3$) 로 조정된 사육시험 결과는 다음과 같다. 1) 3가지 먹이계열 A (rotifer+$3\~18$ Artemia+13 diet), B (rotifer+$6\~18$ Artemia+egg+18 diet), C (rotifer+$6\~30$ Artemia+ 18 diet)로 사육한 자치어의 성장(전장, 체중)은 B ($27.52{\pm}2.50\;mm,\;0.26{\pm}0.06\;g$), A ($25.21{\pm}3.76\;mm,\;0.23{\pm}0.07\;g$), C ($23.22{\pm}3.44\;mm,\;0.15{\pm}0.05\;g$)시험구의 순위였고, 생존율은 B($66.4\%$), A ($57.6\%$), C ($44.4\%$) 시험구의 순위였다. 각 시험구별 자치어의 사육일수에 따른 전장과의 성장관계식은, A 시험구 Y=4.350+0.116X+$1.887X^2$ (r=0.993) B 시험구 Y=4.500+8.931X+$2.221X^2$ (r=0.994) C 시험구 Y=4.478+5.734X+$1.881X^2$ (r=0.990)이었다. 2) 자어의 크기에 따른 개체당 Artemia nauplius의 평균 포식량은 전장5.65 mm일때 9개체, 6.81 mm, 212개체, 9.45 mm, 242개체, 14.96 mm, 750개체, 24.52 mm일때 1,171개체로 전장 $9.45\~24.52$ mm (일령 $15\~20$일) 사이에 급격한 포식량의 증가를 보였다. 3) 폐쇄순환여과 시스템에서 4단계의 밀도별 시험구의 치어성장(평균전장과 체중)은 A ($13.75{\pm}0.76\;cm,\;48.37{\pm}10.61\;g$), B ($13.56{\pm}1.12\;cm,\;44.70{\pm}11.37\;g$), C ($13.22{\pm}1.11\;cm,\;44.03{\pm}10.12\;g$), D ($13.10{\pm}1.12\;cm,\;42.63{\pm}12.91\;g$)시험구의 순으로 저밀도구에서 양호하였고, 최종 생존율은 A $92.9\%,\;C\;91.5%\;B\;89.0\%,D\;88.2\%$ 순위였다. 최종 사육밀도별 단위면적당 총생산량($kg/m^3$)은, D (30.45$kg/m^3$), C (25.89 $kg/m^3$), B(20.75 $kg/m^3$), A (10.48 $kg/m^3$)의 순위로서 개체의 성장과 생존율의 차이는 근소한데 비하여 총생산량에서 큰 차이를 나타내어 동 시험조건에서 경제적인 면을 고려한다aus 고밀도구의 결과가 양호하였다.

  • PDF

참전복 치패의 최적사육 기술현황 (State of Optimal Rearing Technique on the Abalone (Haliotis discus hannai) Juvenile)

  • 손맹현;이정의;박민우;임한규;김대중;황형규
    • 한국수산과학회지
    • /
    • 제42권6호
    • /
    • pp.621-627
    • /
    • 2009
  • In order to standardize the juvenile abalone rearing technique, we selected sample farms by region in East, West and South coasts of Korea and Jeju island. We also have reviewed previous literature and visited farms to survey on the management of abalone juvenile production, spawning, hatching and so forth. Results of investigation are as follows: The light colors of tanks for larvae breeding are good for a frequent examination of larvae behaviour changes during the breeding period. The tank for the abalone juvenile production is a rectangular form in general and its size should amount to 3.5 m in length and 1.2 m width. It also should be built with proper drainage. The best age and size of adult for juvenile production are 3-6 years old individuals, with 9-12 cm separate burial and 125-150 g average weight. To induce spawning, the use of the exposure on air and ultraviolet ray together was the most effective. The density of larvae by plate should be 150-300 individuals and the proper stocking density was est imated and amount to 10-30 individuals. It has been shown that a correlation between water surface size($X_1$) and number of plates ($Y_1$), when producing abalone juveniles, is quite high and it is described by equation $Y_1=138.88X_1-5,736.8\;(R^2=0.9028)$. In addition, it has also been shown that a correlation between production of abalone juveniles ($Y_2$) and number of plates ($X_2$) is high and it is described by equation $Y_2=4.554X_2+12,493\;(R^2=0.8818)$. In Jindo region where a mass production of juveniles abalone has been done, it was shown, that a correlation between rearing water surface size ($X_3$) and production of juveniles abalone ($Y_3$) is very high and this relationship was described by the equation $Y_3=747.03X_2+94,359(R^2=0.9809)$. It has also been shown that a correlation between water surface size ($X_4$) and production of abalone juveniles ($Y_4$) in nationwide is high and the relationship between this variables was described by equation $Y_4=635.85X_4+99,923\;(R^2=0.9020)$.