• Tuberculosis and Respiratory Diseases
• /
• v.41 no.6
• /
• pp.624-631
• /
• 1994

Background: Genus of Aspergilli are ubiquitous saprophytic molds in nature, but its change from a saprophytic fungus to a pathogenic organism has occurred since the use of various antibiotics. The fungus affects the chronically ill and debilitated population. Recently frequency of the fungal infection is increasing in Korea with abuse of antibiotics and glucocorticoids. Method: We analyzed medical records of 52 patients with pulmonary aspergillosis seen at Hanyang University Hospital from 1980 to 1994. The results were as follows; Results: 1) Ages ranged between second to eighth decades with majority(50%) in the fourth to fifth decades. The male to female ratio was 1.1:1. 2) Hemoptysis and productive cough, the leading symptoms, occurred in 42.3% and 25% respectively. 3) On chest X-ray fingings, the characteristic "fungus ball" pattern were observed in 53.8% of the 52cases. 4) Sputum culture for aspergilli were positive in 21.6% of the cases. We performed fine needle aspiration in 22 patients and the diagnostic yield was 100%. 5) Thirty-six patients had history of treatment with antituberculous drugs under diagnosis of pulmonary tuberculosis for an average of 27.3 months. But sputum analysis for acid-fast bacilli were positive in 5.6%(2cases of 36cases), and postoperative pathologic findings showed that 38.9%(12 cases of 28cases) were combined with tuberculosis. 6) Right upper and left upper lobes were predominantly involved(34.6% and 19.2% respectively) and lobectomies were performed in 21 cases. 7) Underlying diseases were present in 47 cases and 48.9% of them were pulmonary tuberculosis. Conclusion: These results showed that pulmonary aspergillosis usually develops in patients with open cavitary pulmonary tuberculosis. And we must consider the possibility of pulmonary aspergillosis in a patient with hemoptysis and cavitary lung lesion.

• The KIPS Transactions:PartC
• /
• v.13C no.1 s.104
• /
• pp.83-94
• /
• 2006

This paper describes ATM cell encipherment method using Rijndael Algorithm adopted as an AES(Advanced Encryption Standard) by NIST in 2001. ISO 9160 describes the requirement of physical layer data processing in encryption/decryption. For the description of ATM cell encipherment method, we implemented ATM data encipherment equipment which satisfies the requirements of ISO 9160, and verified the encipherment/decipherment processing at ATM STM-1 rate(155.52Mbps). The DES algorithm can process data in the block size of 64 bits and its key length is 64 bits, but the Rijndael algorithm can process data in the block size of 128 bits and the key length of 128, 192, or 256 bits selectively. So it is more flexible in high bit rate data processing and stronger in encription strength than DES. For tile real time encryption of high bit rate data stream. Rijndael algorithm was implemented in FPGA in this experiment. The boundary of serial UNI cell was detected by the CRC method, and in the case of user data cell the payload of 48 octets (384 bits) is converted in parallel and transferred to 3 Rijndael encipherment module in the block size of 128 bits individually. After completion of encryption, the header stored in buffer is attached to the enciphered payload and retransmitted in the format of cell. At the receiving end, the boundary of ceil is detected by the CRC method and the payload type is decided. n the payload type is the user data cell, the payload of the cell is transferred to the 3-Rijndael decryption module in the block sire of 128 bits for decryption of data. And in the case of maintenance cell, the payload is extracted without decryption processing.

• Korean Chemical Engineering Research
• /
• v.51 no.5
• /
• pp.609-614
• /
• 2013

This study investigated the spontaneous combustion behavior of solvent-treated low rank coals. Indonesian lignite (a KBB and SM coal) and sub-bituminous (a Roto coal) were mixed with non-polar 1-methyl naphthalene (1MN) either by mechanical agitation or ultrasonication. The property change associated with 1MN treatment was then analyzed using proximate analysis, calorific value analysis, Fourier transform infrared (FT-IR), X-ray photoelectron spectroscopy and moisture re-adsorption test. Susceptibility to spontaneous combustion was evaluated using crossingpoint temperature (CPT) measurement along with gas analysis by GC. A FT-IR profile showed that oxygen functional groups and C-H bonding became weaker when treated by 1 MN. XPS results also indicated a decrease of the oxygen groups (C-O-, C=O and COO-). Increased hydrophobicity was found in the 1MN treated coals during moisture readsorption test. A CPT of the treated coals was ${\sim}20^{\circ}C$ higher than that of the corresponding raw coals and the ultrasonication was more effective way to enhance the stability against spontaneous combustion than the agitation. In the gas analysis less CO and $CO_2$ were emitted from 1MN treated coals, also indicating inhibition of pyrophoric behavior. The surface functional groups participating in the oxidation reaction seemed to be removed by the ultrasonication more effectively than by the simple mechanical agitation.

• Resources Recycling
• /
• v.2 no.2
• /
• pp.27-38
• /
• 1993

In this study, we investigated the grinding and sedimentation(elutriation) process of the dusts for the effective separation of high purity iron and iron oxides. For characterization of the dust, particle size distribution and chemical composition, were examined. The results obtained in this study may be summarized as follows : 1. The converter CF(clarifier) dust of the Pohang 1st, 2nd steel making factory and EC(Evaporation Cooler), EP(Eltrostatic precititator) dust of the Kwangyang 2nd steel making factory are composed $\alpha$-Fe(21~50%), FeO(wustite)$Fe_3$$O_4$(magnetite), $Fe_2$$O_3$, CaO, $Al_2$$O_3$, $SiO_2$, and etc. 2. Pure iron has ductile characteristic in nature, particle size of the pure iron increase by increasing the grinding time. On the other hand, it is conformed that bo고 particles of hematite and magnetite become less than 325 mesh after 10 minutes grinding. 3. By applying the elutriation technique for the EC dust of the Kwangyang 2nd steel making factory, the iron powder of high content more than 99.17% of pure Fe was recovered with 37.8% yield at grinding time for 40 minutes. 4. By applying the elutriation technique for the CF dust of the Pohang 2nd steel making factory, the iron powder of high content more than 98.38% of pure Fe was recovered with 44.42% yield at grinding time for 40 minutes. 5. When magnetic separation was performed using plastic bonding magnet of 70 gauss, more than 98% Fe grade of iron powder was recovered in the size range +65 -200 mesh but the recovery of it was low.

• Clean Technology
• /
• v.21 no.1
• /
• pp.68-75
• /
• 2015

In this study, we investigated the structure and properties of a highly heat conductive metal-ceramic core-shell CoAl₂O₄@Al micro-composite for heterogeneous catalysts support. The CoAl₂O₄@Al was prepared by hydrothermal surface oxidation of Al metal powder, which resulted in the structure with a high heat conductive Al metal core encapsulated by a high surface area CoAl₂O₄ shell. For comparison, CoAl₂O₄ was also prepared by co-precipitation method and also utilized for a catalyst support. Rh catalysts supported on CoAl₂O₄@Al and CoAl₂O₄ were prepared by incipient wetness impregnation and characterized by N₂ adsorption, X-ray diffraction (XRD), scanning electron microscopy (SEM), CO chemisorption, and temperature-programmed reduction (TPR). The properties of catalysts were investigated for glycerol steam reforming reaction for hydrogen production at 550 ℃. Rh/CoAl₂O₄@Al exhibited about 2.8 times higher glycerol conversion turnover frequency (TOF) than Rh/CoAl₂O₄ due to facilitated heat transport through the core-shell structure. The CoAl₂O₄@Al and CoAl₂O₄ also showed some catalytic activities due to a partial reduction of Co on the support, and a higher catalytic activity was also found on the CoAl₂O₄@Al core-shell than CoAl₂O₄. These catalysts, however, displayed deactivation on the reaction stream due to carbon deposition on the catalysts surface.

• The Korean Journal of Malacology
• /
• v.32 no.4
• /
• pp.263-268
• /
• 2016

Metallothionein (MT) family of metal-binding proteins are involved in maintaining homeostasis and heavy metal poisoning. Recently, MT has been considered as a biomarker that can identify a particular species, very similar to the use of cytochrome oxidase I (COI) gene. Satsuma myomphala species of land snails have been reported from North-East Asia, including South Korea and Japan. In particular, the land snail species have been known from only a limited area of Geoje Island, Gyeongsangnam-do province of South Korea. Genetic studies of S. myomphala has been limited with only 6 nucleotide, 2 protein registered on the NCBI server. For elucidating the genetic information of S. myomphala, we conducted RNA sequencing analysis using Illumina HiSeq 2500 next-generation platform. We screened the MT gene from the RNA-Seq database to confirm the molecular phylogenetic relationship. After sequencing, the de novo analysis and clustering generated 103,774 unigenes. After annotation against PANM database using BLAST program, we obtained MT sequence of 74 amino acid residues containing the coding region of 222 bp. Based on this sequence, we found about 53 sequences using the BLAST program in NCBI nr database. Using ClustalX alignment, Maximum-Likehood Tree of MEGA program, we confirmed the molecular phylogenetic relationships that showed similarity with mollusks such as Helix pomatia and H. aspersa, Megathura crenulata.

• Progress in Medical Physics
• /
• v.23 no.4
• /
• pp.317-325
• /
• 2012

The Varian PORTALVISION (Varian Medical Systems, US) shows significant overresponses as the off-center distance increases compared to the predicted dose. In order to correct the dose discrepancy, the off-axis correction is applied to VARIAN iX linear accelerators. The portal dose for $38{\times}28cm^2$ open field is acquired for 6 MV, 15 MV photon beams and also are predicted by PDIP algorithm under the same condition of the portal dose acquisition. The off-axis correction is applied by modifying the $40{\times}40cm^2$ diagonal beam profile data which is used for the beam profile calibration. The ratios between predicted dose and measured dose is modeled as a function of off-axis distance with the $4^{th}$ polynomial and is applied to the $40{\times}40cm^2$ diagonal beam profile data as the weight to correct measured dose by EPID detector. The discrepancy between measured dose and predicted dose is reduced from $4.17{\pm}2.76$ CU to $0.18{\pm}0.8$ CU for 6 MV photon beam and from $3.23{\pm}2.59$ CU to $0.04{\pm}0.85$ CU for 15 MV photon beam. The passing rate of gamma analysis for the pyramid fluence patten with the 4%, 4 mm criteria is improved from 98.7% to 99.1% for 6 MV photon beam, from 99.8% to 99.9% for 15 MV photon beam. IMRT QA is also performed for randomly selected Head and Neck and Prostate IMRT plans after applying the off-axis correction. The gamma passing rare is improved by 3% on average, for Head and Neck cases: $94.7{\pm}3.2%$ to $98.2{\pm}1.4%$, for Prostate cases: $95.5{\pm}2.6%$, $98.4{\pm}1.8%$. The gamma analysis criteria is 3%, 3 mm with 10% threshold. It is considered that the off-axis correction might be an effective and easily adaptable means for correcting the discrepancy between measured dose and predicted dose for IMRT QA using EPID in clinic.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.26 no.12
• /
• pp.605-619
• /
• 2014

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2013. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of fluid machinery, pipes and relative parts including orifices, dampers and ducts, fuel cells and power plants, cooling and air-conditioning, heat and mass transfer, two phase flow, and the flow around buildings and structures. Research issues dealing with home appliances, flows around buildings, nuclear power plant, and manufacturing processes are newly added in thermal and fluid engineering research area. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results for general analytical model for desiccant wheels, the effects of water absorption on the thermal conductivity of insulation materials, thermal properties of Octadecane/xGnP shape-stabilized phase change materials and $CO_2$ and $CO_2$-Hydrate mixture, effect of ground source heat pump system, the heat flux meter location for the performance test of a refrigerator vacuum insulation panel, a parallel flow evaporator for a heat pump dryer, the condensation risk assessment of vacuum multi-layer glass and triple glass, optimization of a forced convection type PCM refrigeration module, surface temperature sensor using fluorescent nanoporous thin film. In the area of pool boiling and condensing heat transfer, researches on ammonia inside horizontal smooth small tube, R1234yf on various enhanced surfaces, HFC32/HFC152a on a plain surface, spray cooling up to critical heat flux on a low-fin enhanced surface were actively carried out. In the area of industrial heat exchangers, researches on a fin tube type adsorber, the mass-transfer kinetics of a fin-tube-type adsorption bed, fin-and-tube heat exchangers having sine wave fins and oval tubes, louvered fin heat exchanger were performed. (3) In the field of refrigeration, studies are categorized into three groups namely refrigeration cycle, refrigerant and modeling and control. In the category of refrigeration cycle, studies were focused on the enhancement or optimization of experimental or commercial systems including a R410a VRF(Various Refrigerant Flow) heat pump, a R134a 2-stage screw heat pump and a R134a double-heat source automotive air-conditioner system. In the category of refrigerant, studies were carried out for the application of alternative refrigerants or refrigeration technologies including $CO_2$ water heaters, a R1234yf automotive air-conditioner, a R436b water cooler and a thermoelectric refrigerator. In the category of modeling and control, theoretical and experimental studies were carried out to predict the performance of various thermal and control systems including the long-term energy analysis of a geo-thermal heat pump system coupled to cast-in-place energy piles, the dynamic simulation of a water heater-coupled hybrid heat pump and the numerical simulation of an integral optimum regulating controller for a system heat pump. (4) In building mechanical system research fields, twenty one studies were conducted to achieve effective design of the mechanical systems, and also to maximize the energy efficiency of buildings. The topics of the studies included heating and cooling, HVAC system, ventilation, and renewable energies in the buildings. Proposed designs, performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment is mostly focused on indoor environment and building energy. The main researches of indoor environment are related to infiltration, ventilation, leak flow and airtightness performance in residential building. The subjects of building energy are worked on energy saving, operation method and optimum operation of building energy systems. The remained studies are related to the special facility such as cleanroom, internet data center and biosafety laboratory. water supply and drain system, defining standard input variables of BIM (Building Information Modeling) for facility management system, estimating capability and providing operation guidelines of subway station as shelter for refuge and evaluation of pollutant emissions from furniture-like products.

• Journal of Acupuncture Research
• /
• v.17 no.2
• /
• pp.41-51
• /
• 2000

Clinical observation was made on 44 cases of stable thoracolumbar compression fracture that were confirmed through simple x-ray and neurological examination. They were hospitalized and treated by acupuncture and moxibustion, bed rest, herb medicine and physical therapy. If necessary, patient was given an enema. The results obtained are as follows. 1. The patient distribution ratio, in regard to sex, was shown to be 1: 13.7 for males to females. In regard to age, it was shown that people in their 60's was the most predominant case, followed by people in their 70's, 80's, 50's and 40's, respectively. 2. In regard to contributing factors, it was observed that accidental falls were most frequent, followed by reasons unknown, repetitive lifting of heavy objects, overlaboring and bruise in that order. 3. In regard to duration of illness before treatment, it was found that treatment within 1 week was most predominant, followed by over 4 weeks, and 1-2 weeks, respectively. 4. With regard to the duration of hospitalization, hospitalization within 2 weeks was found to be most predominant, followed by 2-4 weeks. 5. In regard to the level of the affected vertebral body; The affected vertebral bodies distributed between T3 to L5 except for T7; T12 was found to be most predominant, followed in turn by L1 and L5. 6. In regard to the number of affected vertebral bodies, 2 was the most frequent followed by 1 and 3, in that order. The average of the number of affected vertebral bodies was observed to be 2.8 and single vertebral body compression fracture was shown to have no clinical and statistical difference as compared with multiple vertebral body compression fractures. 7. In regard to the grade of the seriousness of symptoms, it was found that Grade IV was most predominant, followed by Grade III. 8. With regard to signs at the first medical examination, low back pain was seen in the highest number, and followed in order by gait disturbance, flank pain, flexion-extension disturbance, disturbance of rotation to right or left, and bowel dysfunction. 9. Concerning the effect of treatment, good results were most predominantly seen, and 95.5% of total patients showed fair results. 10. The duration of admission treatment due to the grade of clinical symptoms was as follows; In the case of the Grade IV, it was observed that within 2 weeks was most predominant and for Grade III was 2-4 weeks. It was also found that the grade of clinical symptoms was not in proportion to the duration of admission treatment. 11. In regard to the result of treatment due to the grade of clinical symptoms; It was found that in the case of Grade IV, within 2 weeks was most predominant, and for Grade III, it was found to be 2-4 weeks. 12. Intestinal obstruction was shown in 50% of total patients; In the case of duration of constipation, more than 1 week was found to be most predominant, followed by 2 and 4 days respectively. 13. With regard to the treatment of intestinal obstruction, using acupuncture and moxibustion, herb - medicine and enema together were found to be most effective. 14. Intestinal obstruction was mostly seen in the case of Grade IV.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.7 no.1
• /
• pp.29-50
• /
• 2001

This research have been made to define how the IADL (Instrumental Activity of Daily Living) performance and the subjective health index of the Aged are affected by their residential circumstance, gender and age, and how deeply these two factors are related and interact. For the period of June 1 to July 31, 2000, we had conducted a questionnaire and direct interview with 693 persons over age sixty-five (65) in Daejon and in other adjacent area, grouping into three different residential types The Aged living at home, The Aged living at welfare facilities and The Aged living alone, and studied on how the IADL performance and the subjective health index of the Aged are influenced and interact as per their characteristics, daily activity and mentality. We had analyzed all the data obtained through this research by the method of : - analysis of frequency as per specific factors by SPSS 1O.0/PC+, - $x^2$ test, - t-test, - ANOVA, - multiple regression analysis by factors. The research concludes followings : a. It appears that the three (3) factors such as gender, age and residential circumstance of the Aged deeply affect the IADL performance and subjective health index of the Aged. (p<0.01) b. With regard to IADL performance of the Aged by the gender, it was analyzed that the female-Aged gains 23.8 point on average, which shows the performance of the female-Aged is less independent. (p<0.01). In addition, it was also found that the IADL performance is becoming less and less independent following their age increasing. In analyzing IADL performance by the residential type, it appears that the Aged living at welfare facilities gains the lowest 21.5 points and is least independent. It was also found that the Aged living at welfare facilities need some assistances from others for their performing IADL. (20-24 point) (p<0.001) c. With regard to the subjective health index of the all-Aged participated in this research, the analysis indicates 8.8 point and this is considered as a point of general standard (7-10 point). In analyzing this index by the gender, the female-Aged gains only 8.6 point which explains a lot of female-Aged consider they are not really healthy. (p<0.001) In analyzing this index by the residential type, the Aged living at welfare facilities and the Aged living alone gain the comparatively lower point, - respectively 8.4 point for the Aged living at welfare facilities and 8.8 point for the Aged living alone. The Aged living at these two residential types express they are obviously in a bad situation of health. (p<0.001) d. With regard to the factors affecting the IADL performance and the subjective health index of the Aged, it was analyzed that the IADL performance can largely be affected by the factors such as depression, frequency of going-out and age rising, and that the subject health index can also deeply be affected by depression, pain and by how much they are satisfied with their current living conditions. e. It was analyzed that the interacting between the IADL performance and the subjective health index is not that strong but even weak. As a result, we were able to conclude that the IADL performance is less independent in case of the female-Aged, the Aged living at welfare facilities, and following the age rising. As for the subjective health state the Aged themselves are aware of, we concluded that the female-Aged, the Aged living at welfare facilities and the Aged living alone, are more critical about their health. From this research, we were able to realize that, when the OMT (Orthopedic Manual Therapy) needed, the physical therapists are really required to have a correct and cautious understanding of the situation in which the aged persons are, and take care of them with more concerns and more improved treatment.