• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1990년도 제12회 학술강연회초록집
• /
• pp.46-57
• /
• 1990

It is known that the effects of oil supply conditions on the characteristics of plain journal bearings are significant and especially the dynamic characteristics are affected by cavity region. For various shapes (axial groove, spiral groove, X-shape groove) and positions of oil grooves, the pressure distribution and the static performance of plain journal bearings are obtained with numerical methods. Elrods algorithm which implements JFO oil rupture/reformation boundary condition is used in order to take into account the effect of cavity region. It is shown that in the cases of axial groove or X-shape groove the load capacity and the attitude angle are affected by the groove position but the effect of spiral groove position is less significant.

• Tribology and Lubricants
• /
• 제6권2호
• /
• pp.76-87
• /
• 1990

It is known that the effects of oil supply conditions on the characteristics of plain journal bearings are significant and especially the dynamic characteristics are affected by cavity region. For various shapes (axial groove, spiral groove, X-shape groove) and positions of oil grooves, the pressure distribution and the static performance of plain journal bearings are obtained with numerical methods. Elrods algorithm which implements JFO oil rupture/reformation boundary condition is used in order to take into account the effect of cavity region. It is shown that in the cases of axial groove or X-shape groove the load capacity and the attitude angle are affected by the groove position but the effect of spiral groove position is less significant.

• 한국기계가공학회지
• /
• 제17권4호
• /
• pp.169-176
• /
• 2018

Removal of angular deformation induced during the welding of butt joints in thick steel plates needs expert skill and is costly. To reduce deformation, proper joint designs are studied with a prediction of deformation prior to welding. However, as the thickness of a plate increases, a predictive analysis of the welding process is more difficult, especially if there is an increase in the number of welding passes in the joint. In this study, a numerical model with the finite element method (FEM) was developed to analyze the angular deformation in the multi-pass welding of butt joints of plates made of AH32 steel that had a thickness of up to 100 mm. A series of numerical simulations were then performed based on the developed model to predict the deformations for thick plates. With the results obtained by the analyses, this study suggested optimal X-shape grooves for the butt joints of thick plates to minimize the angular deformation. As the thickness of the plate increased to 100 mm, the ratio of the depth of the front-side groove to that of the back-side groove should be gradually increased to nearly 1:3.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.121-122
• /
• 2002

This paper presents contact behavior of an Polyperfluoroalkoxyethylene(PTFE) ring seals by a non-linear finite element method using the thermomechanical analysis. PTFE elastomer was assumed as odgen model for numerical analysis in FEM commercial code because elastomer has nonlinear behaviour character. The shape effects are investigated for sealing performance of ring seal in boundary conditions which as gas pressure, groove temperature and various O-ring seal models. Also contact stress and equivalent total strain are investicated. An O-ring seals was modeled four shape which are circle, two sunflower and X. The highest contact stress occurs at sunflower-ring seal with groove deapth of 0.35mm. the equivalent total strain of sunflower-ring seal is lower than that of the others under low gas pressure condition but under gas pressure condition over 4Mpa, that of sunflower-ring seal is higher. The calculated FEM results shows that the Sunflower-ring seal with groove depth of 0.35mm has excellent performance compared with other seal models.

• 대한기계학회논문집A
• /
• 제32권9호
• /
• pp.733-739
• /
• 2008

The X-ring is a elastomer with X-shaped cross-section used as a mechanical seal or gasket. Such a X-ring was equipped in a groove and compressed between two or more parts, acts as a seal on the interface. This study aims to detect contact stress and deformed shape of a X-shaped ring shell under various compressive contact conditions. A contact stress analysis was carried out by finite element analysis. The effect of compression rates and thickness design variable was analyzed. X-ring kept up the double seal until a compression rate of 20%. The maximum stresses of the X-ring was occurred at the top and bottom corner. The maximum contact stress of X-ring was rapidly increased according with the compression rate. The X-rings with thickness design variable from 1.3 mm to 1.5 mm had comparative low stress levels.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제11권1호
• /
• pp.294-306
• /
• 2019

On the basis of the Computational Fluid Dynamics technique (CFD) combined with the overlap grid method, this paper establishes a numerical simulation method to study the problem of ice-propeller interaction in viscous flow and carries out a simulation forecast of the hydrodynamic performance of an ice-class propeller and flow characteristics when in the proximity of milling-shape ice (i.e., an ice block with a groove cut by a high-speed revolving propeller). We use a trimmed mesh in the entire calculation domain and use the overlap grid method to transfer information between the domains of propeller rotation calculation and ice-surface computing. The grid is refined in the narrow gap between the ice and propeller to ensure the accuracy of the flow field. Comparison with the results of the experiment reveals that the error of the hydrodynamic performance is within 5%. This confirms the feasibility of the calculation method. In this paper, we calculate the exciting force of the propeller, analyze the time domain of the exciting force, and obtain the curve of the frequency domain using a Fourier transform of the time-domain curve of the exciting force. The existence of milling-shape ice before the propeller can greatly disturb the wake flow field. Unlike in open water, the propeller bearing capacity shows a downward trend in three stages, and fluctuating pressure is more disordered near the ice.

• 한국정보통신학회논문지
• /
• 제6권8호
• /
• pp.1374-1380
• /
• 2002

용접을 하는데 있어서 보다 균일한 용접상태를 유지하고, 용접품질의 향상 및 동일시간에 보다 많은 용접을 함으로써 생산성 향상을 위해 로봇의 이용이 점차로 증가하고 있다. 로봇용접의 과정 중 실제 용접을 실시하기 위해 로봇을 움직이기 이전에 용접할 부위의 검출이 선행되어야 하고, 그 검출방법에 있어서 크게 접촉식과 비접촉식의 센서가 활용이 되고 있다. 본 논문에서는 비접촉식 중 비전센서인 레이저 다이오드와 CCD 카메라를 이용하여 CCD 카메라를 거친 영상을 처리하여 용접선을 추적하고 용접을 하도록 하고 있다. 레이저 다이오드를 용접모재와 일정 각도를 가지도록 조사하게 되면 모재표면의 형상에 따라 반사되는 굴곡면이 달라지게 되는데 이 형상이 CCD 카메라를 통해 입력되고, 이 입력된 화상을 이미지 보드와 프로그램을 통하여 분석을 하고, 얻어진 용접선의 화상의 좌표 값을 토대로 로봇을 이동시킴으로써 용접을 하도록 하고 있다. 용접은 실시간으로 이루어짐으로써 생산성 향상에 크게 기여할 수 있다. 또한 모재에 따라 굴곡이 다른 1차원 평면의 용접인 경우는 약간의 프로그램 수정으로 대부분 추적 가능하다는 것을 확인할 수 있었다.

• 보존과학연구
• /
• 통권19호
• /
• pp.61-74
• /
• 1998

Conservation Treatment Process 1. Inlaying is observed at the back and head of a sword to grasp the inner structure of relics by photographing X-ray. 2. After removing rust of surface, inlaying emerge. 3. After hardening, inlaying emerge to magnetite layer by standing Scapel and Vibrotool throught microscope. Charcterization 1. Most of domestic inlaying become designed to the head of a sword but this inlaying become designed to gold inlaying to the back of a sword. 2. Inlaying is the technique to groove V-shape on the surface of relice and to put gold thread in.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2001년도 춘계종합학술대회
• /
• pp.460-464
• /
• 2001

최근, 아크용접을 하는데 있어서 보다 균일한 용접상태와 용접품질의 향상 및 동일시간에 보다 많은 용접을 함으로써 생산성 향상을 위해 로봇의 이용이 점차로 증가하고 있다. 로봇용접의 과정 중 실제 용접을 실시하기 위해 로봇을 움직이기 이전에 용접할 부위의 검출이 선행되어야 하고, 그 검출방법에 있어서 크게 접촉식과 비접촉식으로 대별된다. 본 논문에서는 비접촉식 중 영상처리센서인 레이저 다이오드와 CCD 카메라를 이용하여 CCD 카메라를 거친 영상을 처리하여 용접선을 추적하고 용접을 하도록 하고 있다. 레이저 다이오드를 용접모재와 어떤 각도를 가지도록 조사하게 되면 모재표면의 형상에 따라 반사되는 굴곡면이 달라지게 되는데 이 형상이 CCD 카메라를 통해 입력되고, 이 입력된 화상을 이미지 보드와 프로그램을 통하여 분석을 하고, 얻어진 용접선의 화상의 좌표 값을 토대로 로봇을 이동시킴으로써 용접을 하도록 하고 있다. 용접은 실시간으로 이루어짐으로써 생산성 향상에 크게 기여할 수 있다. 또한 모재에 따라 굴곡이 다른 1차원 평면의 용접인 경우는 약간의 프로그램 수정으로 대부분 추적 가능하다.

• 박물관보존과학
• /
• 제17권
• /
• pp.55-68
• /
• 2016

국립중앙박물관은 일제강점기 조선총독부박물관에서 발굴되었던 석암리 9호분 출토유물의 보존처리 및 연구를 진행하고 있다. 본 연구에서는 출토된 유물 가운데 청동 및 금동단추의 과학적 조사를 실시하여 제작방법을 유추하였다. 관찰 결과 청동 및 금동 단추는 반구형으로 외형적 특징이 비슷하나 걸이의 단면 형태 및 크기에서 차이점이 보인다. 걸이의 단면형태는 원형과 사각형이며 두 그룹으로 분류되고 이 그룹 내에서 길이를 기준으로 세분화를 하였다. 원형 걸이의 경우, 걸이의 형태 및 설치 위치가 다양하며 두께가 일정하지 않으며 몸체와 걸이의 경계부가 고르지 못하다. 사각형 걸이는 걸이의 형태 및 위치가 일정하며 몸체의 바닥면에 걸이가 연결되었으며 표시선으로 보이는 홈이 존재한다. 또한 X-ray 조사결과, 원형 걸이의 경계부분은 두꺼우며 이는 흙이나 이물질이 아닌 금속물질로 확인된다. 제작기법은 밀랍법으로 추측되며 걸이의 단면형태에 따라 몸체와 접합과정이 차이가 있다.