• 제목/요약/키워드: X-ray grid

검색결과 103건 처리시간 0.027초

Transmission Electron Microscopy Specimen Preparation for Layer-area Graphene by a Direct Transfer Method

  • Cho, Youngji;Yang, Jun-Mo;Lam, Do Van;Lee, Seung-Mo;Kim, Jae-Hyun;Han, Kwan-Young;Chang, Jiho
    • Applied Microscopy
    • /
    • 제44권4호
    • /
    • pp.133-137
    • /
    • 2014
  • We suggest a facile transmission electron microscopy (TEM) specimen preparation method for the direct (polymer-free) transfer of layer-area graphene from Cu substrates to a TEM grid. The standard (polymer-based) method and direct transfer method were by TEM, high-resolution TEM, and energy dispersive X-ray spectroscopy (EDS). The folds and crystalline particles were formed in a graphene specimen by the standard method, while the graphene specimen by the direct method with a new etchant solution exhibited clean and full coverage of the graphene surface, which reduced several wet chemical steps and accompanying mechanical stresses and avoided formation of the oxide metal.

심장혈관조영촬영(心臟血管造影撮影)의 촬영조건(撮影條件)에 대(對)한 검토(檢討) (A Study on Optimum Technics in Angiocardiography)

  • 안봉선
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제4권1호
    • /
    • pp.37-44
    • /
    • 1981
  • It is a experimental report to investigate optimum exposure technics in angiocardiography. Because of x-ray absorption and rapid voluntary motion in the heart region, it bound that discrimination ability of the exposed film is being decreased in ACG To circumvent these disadvantage it must be necessary to use short time exposure technics and also high capacity equipment in ACG. But in the case of using the low tube voltage to improve contrast on the exposed film, it will be result in a many difficulties in interpretation of the image due to increased contrast in vertebral images. Therefore the ranges 80 kVp to 90 kVp of could be suitable for the purpose of good contrast and an excellent discrimination ability and under this circumstance the optimum grid ratio for ACG was 8:1 to 12:1.

  • PDF

Extensions of Streaming Rays Method for Streaming Dominant Neutron Transport Problems

  • Hong, Ser-Gi;Cho, Nam-Zin
    • Nuclear Engineering and Technology
    • /
    • 제28권3호
    • /
    • pp.320-330
    • /
    • 1996
  • The streaming rays(SR) method is improved and extended to multigroup, anisotropic scattering, and three-dimensional angular space(x-y-z(infinite))problems. This method is applied to the shielding problems in which the ray effect occurs seriously. For verification, the results of MORSE-CG code are used as reference solution and the results of TWODANT code are compared. The results show that solutions of the SR method are much better than those of the TWODANT code and are in good agreement with those of the MORSE-CG code. Also, to reduce computing time, two acceleration algorithms are implemented in the SR method : the standard coarse-mesh rebalance and a new angular two-grid acceleration.

  • PDF

Spray pyrolysis 방법에 의한 넓은 면적의 $Cu_2$S/CdS 태양전지의 제작 (Fabrication of large scale $Cu_2$S/CdS solar cells prepared by spray pyrolysis)

  • 차덕준;고정곤;정상조;남승재;김광윤;전용기
    • 한국진공학회지
    • /
    • 제5권4호
    • /
    • pp.341-347
    • /
    • 1996
  • Spray pyrolysis 방법으로 넓은 면적의 $Cu_2S$/CdS 태양전지를 제작하였다. 제작과정에서 전극형성, CdS spray 온도조건, $Cu_2S$층의 접합 조건등 태양전지의 효율에 영향을 주는 요인을 조사하였다. CdS 박막의 조건은 주사 전자현미경, X-선 회절기, 온도변화에 따른 광흡수 및 관전도 특성등을 통해 결정하였다. 1$\textrm{cm}^2$의 면적의 전지에 air mass 2(AM2)인 75mW/$\textrm{cm}^2$로 빛을 조사했을 때 3.15%의 효율을 얻었다.

  • PDF

저에너지 고출력 이온빔을 이용한 polyvinylidene fluoride 표면의 초친수성화 (Superhydrophilic Surface Modification of Polyvinylidene Fluoride by Low Energy and High Flux ion Beam Irradiation)

  • 박종용;정연식;최원국
    • 한국재료학회지
    • /
    • 제15권6호
    • /
    • pp.382-387
    • /
    • 2005
  • Polyvinylidene fluoride (PVDF) surface was irradiated and became superhydrophilic by low energy (180 eV) and high flux $(\~10^{15}/cm{\cdot}s)$ ion beam. As an ion source, a closed electron Hall drift thruster of $\phi=70mm$ outer channel size without grid was adopted. Ar, $O_2$ and $N_2O$ were used for source gases. When $N_2O^+$ and $O_2^+$ reactive gas ion beam were irradiated with the ion fluence of $5\times10^{15}/cm^2$, the wetting angle for deionized water was drastically dropped from $61^{\circ}\;to\;4^{\circ}\;and\;2^{\circ}$, respectively. Surface energy was also increased up to from 44 mN/m to 81 mN/m. Change of chemical component in PVDF surface was analyzed by x-ray photoelectron spectroscopy. Such a great increase of the surface energy was intimately related with the increase of hydrophilic group component in reactive ion irradiated PVDF surfaces. By using an atomic force microscopy, the root-mean-square of surface roughness of ion irradiated PVDF was not much altered compared to that of pristine PVDF.

A X-ray Tube Using Field Emitter Made by Multi-walled Carbon Nanotube Yarns

  • Kim, Hyun-Suk;Castro, Edward Joseph D.;Kwak, Seung-Im;Ju, Jin-Young;Hwang, Yong-Gyoo;Lee, Choong-Hun
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
    • /
    • pp.392-392
    • /
    • 2011
  • Carbon nanotubes (CNT) emitter has widely become an attractive mechanism that draws growing interests for cold cathode field emission.$^{1,2}$ CNT yarns have demonstrated its potential as excellent field emitters.$^3$ Extensive simulations were carried out in designing a CNT yarn-based cathode assembly. The focal spot size dependence on the anode surface of the geometric parameters such as axial distance of the electrostatic focus lens from the cathode and the applied bias voltages at the cathode, grid mesh and electrostatic focus lens were studied. The detailed computer simulations using Opera 3D electromagnetic software$^4$ had revealed that a remarkable size of focal spot under a focusing lens triode type set-up design was achieved. The result of this optimization simulation would then be applied for the construction of the CNT yarn based micro-focus x-ray tube with its field emission characteristics evaluated.

  • PDF

휴대용 XRF와 GIS를 이용한 폐광산 지역의 토양오염에 관한 연구 (A Study on the Soil Contamination(Maps) Using the Handheld XRF and GIS in Abandoned Mining Areas)

  • 이현규;최요순
    • 한국지리정보학회지
    • /
    • 제17권3호
    • /
    • pp.195-206
    • /
    • 2014
  • 본 연구에서는 휴대용 X-선 형광 분석기(X-Ray Fluorescence, XRF)와 지리정보시스템(Geographic Information Systems, GIS)을 이용하여 부산 폐광산 지역의 구리와 납에 관한 토양오염지도를 작성하였다. 연구지역의 수치표고모델(Digital Elevation Model, DEM)을 이용한 수문 분석을 통해 오염원으로부터 오염 물질이 확산될 수 있는 빗물의 흐름방향을 분석하였으며, 이를 고려하여 토양오염도 측정 지점을 24곳 선정하였다. 휴대용 X-선 형광 분석기를 이용하여 24곳 토양에서 구리와 납의 농도를 측정한 결과, 구리는 최대 8,255ppm, 납은 최대 2,146ppm가 검출되었다. 휴대용 X-선 형광 분석기로 측정한 구리와 납의 농도 자료를 ArcGIS 소프트웨어에 입력하였으며, 정규크리깅(ordinary kriging) 기법을 이용하여 공간보간(spatial interpolation)을 수행한 후 구리와 납에 관한 5m 해상도의 토양오염지도를 작성하였다. 그 결과 부산 폐광산 지역에서는 갱구들 주변에 적치되어 있는 폐석 및 광미를 중심으로 고농도의 구리와 납이 토양 내에 존재하는 것을 작성된 토양오염지도로부터 확인할 수 있었다. 본 연구를 통해 휴대용 X-선 형광 분석기와 GIS를 이용한 구리와 납의 토양오염지도 작성방법이 현장에서 효과적으로 사용될 수 있음을 알 수 있었다.

보건소(保健所)의 방사선과(放射線科) 업무(業務)에 관한 조사연구(調査硏究) (Survery on Business of the Departments of Radiology in Health Centers)

  • 최종학;전만진;허준;박성옥
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제8권2호
    • /
    • pp.21-28
    • /
    • 1985
  • We serveyed the actual condition of business of the departments of radiology of 45 health conters (except 3) in the area of Seoul, Kyungki and Inchon from March, 1984 to November, 1984. The results are summarized as follows : 1. T.O. of the radiologic technologist is three persons in each health center of Seoul area, and one person in each one of Kyungki and Inchon area. P.O. is 2-5 persons in Seoul area, 1-2 persons in Kyungki or Inchon area. 2. The number of all the radiologic technologists employed now is 75 persons, and among all of them, when analized by position class 7th is 54.7%, class 8th 28.0%, class 9th is 13.3%, and class 6th is 2.7%, and by sex, female is 68.0%, male is 32.0%, by educational background, for the most part, junior college graduates come to 73.3%, by age group 60% of them is in their twenties, 16.0% is in their thirties and forties, 8.0% is in their fifties, and by career after certificate 60% have the career of 1-5 years, 13.3% have the one of 6-7 years or mor than 21 years, and 6.7% have the one of 11-15 years of 16-20 years. 3. All the diagnostic x-ray equipment being kept is 62, and among them flxing equipment is 71.0%, portable equipment is 29.0% and by rating of X-ray equipment, maximum tube current 100 mA is 46.8%, maximum KV 100KVP is 72.6%, the most part. 4. Photofluorographic camera and hood are equipped in every health center. While, as to the radiographic cassettes, $14{\times}14"$ cassetts are equipped in every health center, but cassettes of other sizes are in half of them. 5. Bucky's table is equipped in 11.9% health centers, the automatic processor is in 21.4%, the photofluorographic film changer is 9.5%, the grid is 73.8%, the protective apron is in 88.1%, and the protective glove is in 57.1% health centers. 6. The number of the people who got the x-ray examination for one year (by the year 1989) is the most, 1,000-6,000 in direct radiography of the chest, or 15,0001-45,000 in the health centers of Seoul area, 5,000-20,000 in Kyungki and Inchon area in photofluorography of the chest. Moreover, other radiographies are being taken extremely limitedly in all health centers. 7. In processing types of x-ray film, automatic processing is used in 9 health centers (21.4%), manual tank processing is in 30 (71.4%), and manual tray processing in 3 (7.2%). 8. As for collimation of x-ray exposure field, "continual using restricted by a subject size" has the most part, 78.6% "restricted using at every radiography" has 19%, and the case of "never considered" has 2.4% response. 9. As for the dosimeter used for radiation control, film badge (35.7%) and pocket dosimeter (26.2%) are used, and in 38.1% health centers the dosimeter is not equipped at all. Consideration of the previous radiation exposure is being done in only one health center. 10. Reading of radiographs is mainly depended on the radiologists electively (45.2%) or on the genral practitioners(45.2%).

  • PDF

디지털 평판형 검출기에서 Control Panel의 Density Display와 Sensitivity 설정이 조사선량(mAs)과 획득영상에 미치는 영향에 관한 연구 (Study on the Exposure Dose(mAs) and acquisition Image set up Density Display and Sensitivity of control Panel for the Digital Flat-Panel-Detector)

  • 김병기;김상건;차선화;최준구;이준;이민우;김순배;김경수
    • 대한디지털의료영상학회논문지
    • /
    • 제9권2호
    • /
    • pp.17-21
    • /
    • 2007
  • The purpose to recognize change of average pixel value of acquisition image by control panel's density and right set up method of speed (sensitivity) and exposure dose(mAs) change that dose in purpose digital flatpanel-detector. X -ray generator DHF-158H2(Hitachi, Japan). Detector CXDI 4OG(Canon, Japan), 12 : 1 grid and exposure ray 135 kVp, 250 mA, 10 ms. focus-detector distance 180 cm and used AEC mode. DICOM reflex analysis program used image J that is digital reflex analysis program that offer in United States America National Health Center(National Institutes of Health : NlH) phantom used chest phantom(Anthromorphic : Flukebrome.medicaI USA). An experiment chest phantom that consist by formation equivalence material use because density value( -3${\sim}$+3) in X-ray control panel and seep that is speed step(slow, medium, fast) each control experimentalize. image analysis reflex neted through an experiment using image j each image compare. These was change in dose according to slow, medium, fast and density's change in an experiment result. According to detector sensitivity and density condition set, dose was relationship dissimilarity 500% from 200%. The dose came highest when is density +3 to slow. and dose more increases gray scale's extent could know that rise. Could know whether how equipment set is important through this experiment. cause of disease which change by digital radiography system forward is thought to increase more, it is considered that suitable education by this and continuous interest about equipment need absolutely.

  • PDF

디지털방사선시스템에서 IEC표준을 이용한 방사선 영상 품질의 평가 (Evaluation of Image Quality for Radiographic Positioning using IEC Radiation Quality in the Digital Radiography System)

  • 안현;김창수;김정훈
    • 한국콘텐츠학회논문지
    • /
    • 제15권7호
    • /
    • pp.289-299
    • /
    • 2015
  • 본 연구의 목적은 디지털방사선시스템의 영상 품질을 비교하고 평가함에 있다. 영상의 정량적인 분해능을 나타내는 변조전달함수, 노이즈 특성을 나타내는 잡음력 스펙트럼을 이용하여 영상 품질평가를 하였다. IEC61267 선질을 사용하여 IEC62220-1에서 제시하는 기하학적인 조건과 실제 임상에서 사용되어지는 기하학적인 조건을 사용하여 부가필터 및 그리드, 임상선량을 이용하여 edge 팬텀을 사용하여 MTF값을 측정하였다. Grid, Filter, SID, kVp, mAs에 따른 MTF 결과는 임상조건 100, 180cm 와 IEC62220-1 기하학적인 조건 150cm에서 MTF 공간주파수 측정값은 비슷하게 나타났으며, 오히려 임상조건 100, 180cm에서 공간주파수가 높은 경우도 있었다. NPS 결과는 선량이 증가함에 따라 감소함을 나타내었다. IEC61267 선질을 이용한 영상품질평가에서는 IEC62220-1기하학적인 조건을 이용한 품질평가보다 임상조건 기하학적인 조건을 사용한 영상의 품질이 좋았다. IEC 와 임상조건에서의 MTF와 NPS는 크게 차이가 나지 않았음을 알 수 있었다. 그러므로 향후 IEC 표준에서 제시하는 영상품질 평가보다는 임상 조건을 적용한 영상품질 평가방법을 적용하기 위해서 부가필터사용 유 무, 그리드사용 유 무, SID변화, 선질, 선량 등의 파라메터를 적절히 이용하여 가장 적은 선량으로 공간분해능이 좋고, NPS가 감소하는 방법들을 찾는다면 향후 실제 임상에서 사용되고 있는 디지털방사선시스템을 최적의 품질로 유지할 수 있는 참고 자료로 활용될 수 있을 것으로 사료된다.