• 한국주조공학회지
• /
• 제8권4호
• /
• pp.446-452
• /
• 1988

To obtain detailed information on the metastable and the equilibrium phases in rapidly solidified Al-(Fe,Ce) alloys, analysis of X-ray diffraction pattern has been carried out. It has been found that the metastable phase formed in Al-Fe alloys including up to 6wt%Fe is $Al_6Fe$ and the equilibrium phase is $Al_3Fe$. Any X-ray diffraction peak corresponding to the equilibrium phase $Al_{13}Fe_4$ has not been observed during aging. In Al-4wt%Fe alloy, which is ribbon shape with thickness less than $70\;{\mu}m$, aged at $400^{\circ}C$ for 1h after rapid solidification, unidentified phase has been found. In Al-4wt%Ce alloy, only X-ray diffraction peak corresponding to the equilibrium phase, $Al_4Ce$ has been observed. It has been found that the metastable phase Formed in Al-Fe-Ce alloys including up to 6wt% Fe and 4wt% Ce is $Al_6Fe$ and the equilibrium phases are $Al_3Fe$ and $Al_{10}CeFe_2$.

• 분석과학
• /
• 제20권6호
• /
• pp.502-507
• /
• 2007

X 선 회절법은 물질 내부에 원자의 배열 상태를 연구하는데 널리 사용되는 실험 방법으로써 넓은 응용 범위를 가지고 있다. 특히 분말 X 선 회절법은 비파괴적으로 다양한 형태의 시료에 대한 측정이 가능하기 때문에 결정의 배향성, 결정의 크기, 결정 내부의 응력 측정 등에 널리 이용되고 있다. 분말 X 선 회절 방법을 이용하여 혼합물의 성분을 정량적으로 측정하기 위해서는 시료를 구성하고 있는 source 스펙트럼을 도출하고 혼합된 시료의 XRD 스펙트럼에 회귀식을 적합시켜 혼합물 구성비를 얻는 방법이 제안된 바 있다. 그러나 구성성분의 특성상 스펙트럼의 피이크가 폭이 좁고 민감한 경우에는 노이즈의 영향을 받아 도출된 source 스펙트럼이 원래의 순수성분의 형태와 달리 나타날 수 있다. 특히 순수성분 시료를 구할 수 없거나 측정이 불가능한 경우 혼합물 구성비 측정에 어려움이 있다. 본 연구에서는 노이즈 간섭에 의한 source 스펙트럼 도출의 문제를 해결하는 방안으로 비음독립성분분석을 이용하여 혼합된 미지시료로부터 순수한 성분에 해당하는 스펙트럼을 분리해내는 방법을 제안하고자 한다.

• 대한기계학회논문집B
• /
• 제29권11호
• /
• pp.1182-1188
• /
• 2005

An x-ray PIV (Particle Image Velocimetry) technique was developed to measure quantitative information on flows inside opaque conduits and on opaque-fluid flows. At first, the developed x-ray PIV technique was applied to flow in an opaque Teflon tube. To acquire x-ray images suitable for PIV velocity field measurements, refraction-based edge enhancement mechanism was employed using detectable tracer particles. The optimal distance between with the sample and detector was experimentally determined. The resulting amassed velocity field data were in reasonable agreement with the theoretical prediction. The x-ray PIV technique was also applied to blood flow in a microchannel. The flow pattern of blood was visualifed by enhancing the diffraction/interference -bas ed characteristic s of blood cells on synchrotron x-rays without any contrast agent or tracer particles. That is, the flow-pattern image of blood was achieved by optimizing the sample (blood) to detector distance and the sample thickness. Quantitative velocity field information was obtained by applying PIV algorithm to the enhanced x-ray flow images. The measured velocity field data show a typical flow structure of flow in a macro-scale channel.

• Applied Microscopy
• /
• 제35권4호
• /
• pp.1-9
• /
• 2005

이 논문에서 Al-Cu-Mg 합금의 미세 석출 입자의 S-상 ($Al_2CuMg$) 결정구조에 대해 전자회절실험에 의한 포괄적인 연구 결과가 보고 되어 있다. 이 실험에는 한 S-상 입자를 포함하는 최소 영역의 일정 zone축의 회절패턴(SAED) 관찰과 이에 대응되는 운동학적 이론을 기초로 한 패턴의 시물레이션과의 비교 분석, 그리고 관측된 회절 패턴 필름으로부터 각 Bragg회절 점의 강도의 정량적 데이터 추출과 운동학적 및 동역학적 회절 강도 계산과의 비교 검토의 과정을 포함하고 있다. 이러한 연구의 한 결과 S-상의 결정구조는 일찍이 X-ray 방법으로부터 얻은 PW 모델결정(Perlitz and Westgren, 1943)과 일치함을 보여주고 있고, HREM 방법에 의해 새로이 구한 RaVel (Radmilovic et al., 1999) 모델과는 전혀 맞지않음이 판명되었다.

• 한국수소및신에너지학회논문집
• /
• 제13권3호
• /
• pp.197-203
• /
• 2002

The main emphasis of this study was to find an new hydrogen absorbing alloy such as Mg-Ti-Ni-H systems, and to investigate their hydrogenation properties. ($Mg_9Ti_x$)-10, 20wt%Ni-Hx systems were prepared by hydrogen induced mechanical alloying(HIMA) using Mg and Ni chips and sponge Ti. The particles synthesized were characterized by X-ray diffraction, and their morphologies were observed by means of scanning electron microscopy(SEM) with energy dispersive spectrometry (EDS). In addition, the crystal structures were analyzed in terms of their bright-/ dark field images and the selected area diffraction pattern(SADP) of transmission electron microscopy(TEM).

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 The Korea-Japan Joint Symposium
• /
• pp.67-68
• /
• 2003

Native corn starch and montmorillonite caly nanocomposites were prepared using the glycerol as the plasticizer. These were characterized by mechanical analysis, X-ray diffraction, infrared spectroscopy, differential scanning calorimetry, and scanning electron microscopy. The tensile strength increased with the clay content to a maximum point and then decreased due to gapping between the two phases. Dispersion of the layered silicate within the starch was verified using X-ray diffraction pattern. Examination of these materials by scanning electron showed that intercalates have good wetting to the starch surface.

• The Korean Journal of Ceramics
• /
• 제6권3호
• /
• pp.236-239
• /
• 2000

Both the X-ray diffraction data of the normal direction in the sample orientation and the pole figure data of three reflections, (111), (200) and (220), were used to do the Rietveld refinement for the copper sheet prepared by a cold rolling process. The agreement between calculated and observed patterns was not satisfactory, which was attributed to the preferred orientation effect of the copper sheet. The Rietveld refinement for the copper sheet could be done successfully by applying the pole density of each reflection obtained from the corresponding inverse pole figure to the X-ray diffraction data of the normal direction. The R-weighted pattern, $R_{wp}$ was 12.99% and the goodness-of-fit indicator, S, was 3.68.

• Bulletin of the Korean Chemical Society
• /
• 제8권1호
• /
• pp.6-9
• /
• 1987

The study of the $Na_3YSi_3O_9$ structure, by x-ray diffraction and infrared spectrum, showed that $Na_3YSi_3O_9$ is similar to $Na_4CaSi_3O_9$ except for its being pseudo-cubic instead of cubic. The peaks in the x-ray diffraction pattern of $Na_3YSi_3O_9$ could therefore be indexed on the basis of the $Na_4CaSi_3O_9$ cell. Also, modified $Na_3MSi_3O_9$ (M = Lu, Yb, Tm, Er, Y, Ho, Dy, Gd, Eu, and Sm) type compounds were synthesized by introducing excess sodium, decreasing M(III) concentration, and substituting small amount of phosphorus for silicon. The unit cell parameters of the composition $Na_{3.2}M_{0.7}Si_{2.9}P_{0.1}O_{8.7}$ were estimated from x-ray powder diffraction patterns using the Cohen method.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2008년도 동계학술발표회 논문집
• /
• pp.429-430
• /
• 2008

We demonstrate coherent x-ray diffraction imaging using table-top x-ray laser at a wavelength of 13.9nm driven by 10-Hz ti:Sapphire laser system at the Advanced Photonics Research Institute in Korea. Since the flux of x-ray photons reaches as high as $10^9$ photons/pulse in a $20{\times}20{\mu}m^2$ field of view, we measured a ingle-pulse diffraction pattern of a micrometer-scale object with high dynamic range of diffraction intensities and successfully reconstructed to the image using phase retrieval algorithm with an oversampling ratio of 1:6. the imaging resolution is $^{\sim}150$ nm, while that is much improved by stacking the many diffraction patterns. This demonstration can be extended to the biological sample with the diffraction limited resolution.

• 한국광물학회지
• /
• 제26권1호
• /
• pp.27-34
• /
• 2013

X-선회절 분석은 결정질 물질의 정량과 정성분석을 위한 가장 효과적인 분석기술이며, 따라서 회절자료를 이용한 매우 다양한 광물조성 정량분석법이 존재한다. 본 연구에서는 비정질 실리카, 석영, 뮬라이트, 강옥으로 제조한 인공광물혼합시료를 대상으로 리트벨트법과 PONKCS (partial or no known crystal structure) 방법을 적용하여 정량 X-선회절 분석을 수행하였다. 100% 비정질 실리카와 내부표준시료 첨가 시료의 회절자료를 이용하여 PONKCS 방법으로 비정질 실리카의 결정 모형을 성공적으로 구축하였다. 비정질 실리카의 경우, 원 중량 대비 치우침의 절대값 평균은 1.85 wt%였다. 비정질 실리카의 함량이 작은 경우 상대적으로 높은 치우침을 보이는데, 이는 배경 회절패턴의 강도가 낮음에 기인하는 것으로 판단된다. 그밖에 석영, 뮬라이트, 강옥의 경우, 치우침의 절대값 평균은 각각 0.53 wt%, 0.87 wt%, 0.57 wt%였다. 내부표준물질 혼합법을 적용한 전통적인 리트벨트 정량분석 결과와 비교할 때 PONKCS 방법이 비정질 실리카를 포함한 인공광물혼합시료에 대하여 신뢰도 높고 성공적인 정량 분석법임을 확인해 주었다.