• Journal of Navigation and Port Research
• /
• v.26 no.1
• /
• pp.120-126
• /
• 2002

ZnS thin films were prepared on glass substrate at various deposition conditions by a HW apparatus and were systematically investigated the growth characteristics, in terms of deposition edges by a double beam spectro- photometer, and structural analysis by a x-ray diffraction rates were increased with incresing the cell temperature and vapor pressure of sulfur, but were decreased with increasing substrate temperature. The optical characteristics of thin films depends on the deposition rates. The band gap energies of 3.46∼3.52eV measured at room temperature are smaller than the theoretical value of 3.54eV, indicating that impurities exist in the crystal. All ZnS thin films are oriented in the (III) principal direction of a zincblende structure. By introducing the S vapor, optical and crystalline properties have been improved.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.466.2-466.2
• /
• 2014

The Quantum dot (QD) solar cells have been under active research due to their high light harvesting efficiencies and low fabrication cost. In spite of these advantages, there have been some problems on the charge collection due to the limitation of the diffusion length. The modification of advanced nanostructure is capable of solving the charge collection problem by increasing diffusion length of electron. One dimensional nanomaterials such as nanorods, nanowires, and nanotubes may enhance charge collection efficiency in QD solar cells. In this study, we synthesized $TiO_2$ anatase nanorod arrays with length of 200 nm by two-step sol-gel method. The morphology and crystal structure for the nanorod were characterized by using scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray diffraction (XRD). The anatase nanorods are single-crystalline and possess preferred orientation along with (001) direction. The photovoltaic properties for the heterojunction structure QD solar cells based on the anatase nanorod were also characterized. Compared with conventional $TiO_2$ nanoparticle based QD solar cells, these nanostructure solar cells exhibited better charge collection properties due to long life time measured by transient open circuit studies. Our findings demonstrate that the single crystalline anatase nanorod arrays are promising charge transport semiconductors for heterojunction QD solar cells.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.5
• /
• pp.467-475
• /
• 2004

ZnO epilayer were synthesized by the pulsed laser deposition(PLD) process on $Al_2$ $O_3$substrate after irradiating the surface of the ZnO sintered pellet by the ArF(193 nm) excimer laser. The epilayers of ZnO were achieved on sapphire(A $l_2$ $O_3$) substrate at a temperature of 400 $^{\circ}C$. The crystalline structure of epilayer was investigated by the photoluminescence and double crystal X-ray diffraction(DCXD). The carrier density and mobility of ZnO epilayer measured with Hall effect by van der Pauw method are 8.27${\times}$$10^{16}$$cm^{-3}$ and 299 $\textrm{cm}^2$/Vㆍs at 293 K, respectively. The temperature dependence of the energy band gap of the ZnO obtained from the absorption spectra was well described by the Varshni's relation, $E_{g}$(T)= 3.3973 eV - (2.69 ${\times}$ 10$_{-4}$ eV/K) $T^2$(T＋463k). After the as-grown ZnO epilayer was annealed in Zn atmospheres, oxygen and vaccum the origin of point defects of ZnO atmospheres has been investigated by the photoluminescence(PL) at 10 K. The native defects of $V_{Zn}$ , $V_{o}$ , Z $n_{int}$, and $O_{int}$ obtained by PL measurements were classified as a donors or accepters type. In addition, we concluded that the heat-treatment in the oxygen atmosphere converted ZnO thin films to an optical p-type. Also, we confirmed that vacuum in ZnO/A $l_2$ $O_3$did not form the native defects because vacuum in ZnO thin films existed in the form of stable bonds.s.s.s.

• Progress in Superconductivity
• /
• v.3 no.2
• /
• pp.135-139
• /
• 2002

We have fabricated high-quality c-axis-oriented $MgB_2$ thin films by using a pulsed laser deposition technique. The thin films grown on (1 1 0 2) $Al_2$$O_3$ substrates show an onset transition temperature of 39.2 K with a sharp transition width of ~0.15 K. X-ray diffraction patterns indicate a c-axis-oriented crystal structure perpendicular to the substrate surface. We observed high critical current densities ($J_{c}$) of ~ 16 $MA/\textrm{cm}^2$ at 15 K and under self-field, which is comparable to or exceeds those of cuprate high-temperature superconductors. The extrapolation $J_{c}$ at 5 K was estimated to be ~ 40 MA/$\textrm{cm}^2$, which is the highest record for $MgB_2$ compounds. At a magnetic field of 5 T, the $J_{c}$ of~ 0.1 $MA/\textrm{cm}^2$ was detected at 15 K, suggesting that this compound is very promising candidate for the practical applications at high temperature with lower power consumption. As a possible explanation for the high current-carving capability, the vortex-glass phase will be discussed.d.d.d.

• Progress in Superconductivity
• /
• v.8 no.1
• /
• pp.93-97
• /
• 2006

YBCO films were deposited on a moving substrate by a spray pyrolysis method using nitrate aqueous solution as precursors. Deposition was made on $LaAlO_3$(100) single crystal substrate by spraying precursor droplets generated by a concentric nozzle. The cation ratio of precursor solution was Y:Ba:Cu=1:2.65:4.5. The distance between nozzle and substrate was 15 cm. Substrate was transported with a speed ranging from 0.23 cm/min to 0.5 cm/min. Films were deposited at the pressure ranging from 10 Torr to 20 Torr and the deposition temperature was ranged from $740^{\circ}C\;to\;790^{\circ}C$. Oxygen partial pressure was controlled between 1 Tow and S Torr. Superconducting YBCO films were obtained from $740^{\circ}C\;to\;790^{\circ}C$ with an oxygen partial pressure of 3 Torr. Scanning electron microscope(SEM) and X-ray diffraction(XRD) observation revealed that films are smooth and highly texture with(001) plans parallel to substrate plane. Highest Jc was 0.72 $MA/cm^2$ at 77K and self-field for the film with a thickness of 0.15 m prepared at a substrate temperature of $740^{\circ}C$ and $PO_2$=3 Torr.

• Korean Journal of Materials Research
• /
• v.23 no.12
• /
• pp.695-701
• /
• 2013

To understand how reactivity between reinforcing nanoparticles and aqueous solution affects electrodeposited Cu thin films, two types of commercialized cerium oxide (ceria, $CeO_2$) nanoparticles were used with copper sulfate electrolyte to form in-situ nanocomposite films. During this process, we observed variation in colors and pH of the electrolyte depending on the manufacturer. Ceria aqueous solution and nickel sulfate ($NiSO_4$) aqueous solutions were also used for comparison. We checked several parameters which could be key factors contributing to the changes, such as the oxidation number of Cu, chemical impurities of ceria nanoparticles, and so on. Oxidation number was checked by salt formation by chemical reaction between $CuSO_4$ solution and sodium hydroxide (NaOH) solution. We observed that the color changed when $H_2SO_4$ was added to the $CuSO_4$ solution. The same effect was obtained when $H_2SO_4$ was mixed with ceria solution; the color of ceria solution changed from white to yellow. However, the color of $NiSO_4$ solution did not show any significant changes. We did observe slight changes in the pH of the solutions in this study. We did not obtain firm evidence to explain the changes observed in this study, but changes in the color of the electrolyte might be caused by interaction of Cu ion and the by-product of ceria. The mechanical properties of the films were examined by nanoindentation, and reaction between ceria and electrolyte presumably affect the mechanical properties of electrodeposited copper films. We also examined their crystal structures and optical properties by X-ray diffraction (XRD) and UV-Vis spectroscopy.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.169-169
• /
• 2012

현재 디스플레이 시장은 LCD (Liquid Crystal Display), PDP (Plasma Display Panel) 등과 같이 평판 디스플레이가 주류를 이루고 있으며 현재에는 기존의 디스플레이와는 달리 잘 휘어지고 높은 투과성을 가지는 플렉시블 디스플레이에 대한 연구가 활발히 진행 중이다. 하지만 이러한 플렉시블 디스플레이에 사용되는 플라스틱 기판의 경우 용제에 대한 화학적 저항성 및 기계적인 안정성이 취약한 점과 대기중의 수분이나 산소가 플라스틱 기판을 통하여 소자내로 침투하게 되어 금속전극을 산화시키거나 기포 또는 흑점 등과 같은 비 발광 영역이 확산되어 소자의 수명을 단축시키는 치명적인 단점을 가진다. 이에 본 실험에서는 고밀도 플라즈마 형성이 가능하고 저온공정이 가능한 FTS (Facing Target Sputtering) 장비를 이용하여 Polyethylene terephthalate (PET) 기판위에 낮은 수분 투과율 또는 산소 투과율을 갖는 양질의 무기 산화막을 적층하기 위해 저 투습도 및 기계적인 경도 향상을 위한 비 반응성 박막으로 $Al_20_3$층을 Ar분위기에서 증착하였고 그 위에 박막의 stress 감소, 유연성 향상을 위한 반응성 박막으로 Al을 Ar과 $O_2$를 비율별로 증착하여 비교 실험하였다. 이와 같이 제작된 무기산화막들을 Uv- spectrophotometer를 이용하여 광학적 특성을 조사한 결과 가시광 영역에서 모두 80% 이상의 높은 투과율을 나타내었으며, 그 외 XRD (X-ray Diffraction)를 사용하여 결정성을 확인, SEM (Scanning Electron Microscope), AFM (Atomic Force Microscope)을 이용하여 박막의 구조와 표면향상 및 표면조도를 측정한 결과 모든 박막에서 밀집도가 좋으며 거칠기가 작은 것으로 확인되었다. 마지막으로 수분 투과율(WVTR)을 알아보기 위해 Mocon (Permatran W3/31)장비를 이용하여 측정한 결과 $1.0{\sim}3.0{\times}10^{-3}g/m{\cdot}day$의 낮은 수분 투과율을 볼 수 있었다. 이러한 측정 결과로 볼 때 향후 FTS 장비를 이용하여 양질의 플라즈마를 형성하여 알루미늄 무기산화막을 이용한 고밀도 다층막을 형성하면 더욱 낮은 수분투과율을 갖는 가스차단막을 제작할 수 있을 것으로 보여지며 반도체 소자 및 디바이스의 Pachaging으로도 사용가능 할 것이라 사료된다. 본 연구는 한국산업기술진흥원에서 지원하는 2011년도 지역산업기술개발사업의 연구수행으로 인한 결과물임을 밝힙니다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.314-314
• /
• 2012

The dilute magnetic semiconductors (DMS) have been developed to multi-functional electro-magnetic devices. Specially, the Si based DMS formed by ion implantation have strong advantages to improve magnetic properties because of the controllable effects of carrier concentration on ferromagnetism. In this study, we investigated the deep level states of Fe- and Co-ions implanted Si wafer during rapid thermal annealing (RTA) process. The p-type Si (100) wafers with hole concentration of $1{\times}10^{16}cm^{-3}$ were uniformly implanted by Fe and Co ions at a dose of $1{\times}10^{16}cm^{-2}$ with an energy of 60 keV. After RTA process at temperature ranges of $500{\sim}900^{\circ}C$ for 5 min in nitrogen ambient, the Au electrodes with thickness of 100 nm were deposited to fabricate a Schottky contact by thermal evaporator. The surface morphology, the crystal structure, and the defect state for Fe- and Co- ion implanted p-type Si wafers were investigated by an atomic force microscopy, a x-ray diffraction, and a deep level transient spectroscopy, respectively. Finally, we will discuss the physical relationship between the electrical properties and the variation of defect states for Fe- and Co-ions implanted Si wafer after RTA.

• Korean Journal of Medicinal Crop Science
• /
• v.26 no.5
• /
• pp.417-429
• /
• 2018

Background: The objective of this study was to make colloidal dispersions of the active compounds of radix of Angelica gigas Nakai that could be charaterized as nano-composites using hot melt extrusion (HME). Food grade hydrophilic polymer matrices were used to disperse these compound in aqueous media. Methods and Results: Extrudate solid formulations (ESFs) mediated by various HPMCs (hydroxypropyl methylcelluloses) and Na-Alg polymers made from ultrafine powder of the radix of Angelica gigas Nakai were developed through a physical crosslink method (HME) using an ionization agent (treatment with acetic acid) and different food grade polymers [HPMCs, such as HP55, CN40H, AN6 and sodium alignate (Na-Alg)]. X-ray powder diffraction (XRD) analysis confirmed the amorphization of crystal compounds in the HP55-mediated extrudate solid formulation (HP55-ESF). Differential scanning calorimetry (DSC) analysis indicated a lower enthalpy (${\Delta}H=10.62J/g$) of glass transition temperature (Tg) in the HP55-ESF than in the other formulations. Infrared fourier transform spectroscopy (FT-IR) revealed that new functional groups were produced in the HP55-ESF. The content of phenolic compounds, flavonoid (including decursin and decursinol angelate) content, and antioxidant activity increased by 5, 10, and 2 times in the HP55-ESF, respectively. The production of water soluble (61.5%) nano-sized (323 nm) particles was achieved in the HP55-ESF. Conclusions: Nano-composites were developed herein utilizing melt-extruded solid dispersion technology, including food grade polymer enhanced nano dispersion (< 500 nm) of active compounds from the radix of Angelica gigas Nakai with enhanced solubility and bioavailability. These nano-composites of the radix of Angelica gigas Nakai can be developed and marketed as products with high therapeutic performance.

• Journal of the Mineralogical Society of Korea
• /
• v.2 no.1
• /
• pp.26-36
• /
• 1989

Clinopyroxene in the Geodo mine belongs to diopside-hedenbergite series. It is widely distributed throughout the mine area together with garnet and is also closely related with Fe-mineralization. Clinopyroxenes in the Geodo mine including two samples from the sangdong and Ulchin Mines are studied using polarized microscope, EPMA, XRD, and IR spectroscopy for occurrence, chemistry, structure, and crystal chemistry. Especially, variations in unit-cell parameters are examined in relation with the substitution scheme between Fe and Mg cations. Clinopyroxenes in the Geodo mine occur in both endoskarn and exoskarn zone. It is mostly anhedral to subhedral with fine- to medium-grained in texture, but some have bigger crystals of short prismatic or columnar habits. Clinopyroxene occurs as monomineralic or is associated with mostly garnet and sometimes with actinolite, magnetite, epidote, and chlorite. Chemical analysis reveals that the Geodo clinopyroxene is diopsidic in composition (Di: 65-96%). This fact is in good contrast with garnet chemistry showing mostly andraditic (An: 41-82%). Especially, clinopyroxene coexisting with magnetite belongs to nearly end member diopside (Di: 97-99%). Thus, diopside-andradite pair indicates that Geodo skarns were formed under the reduced environment. X-ray diffraction analysis shows unit-cell parameters vary with increase of Fe contents: a = 9.765-9.838$\AA$, b = 8.943-9.020$\AA$, c= 5.240-5.253$\AA$.$\beta$ = 105.70-104.83$^{\circ}$, and V =440.64-448.19$\AA$3. It is noted from the least square regression that a, b and V increase linearly with increase of Fe content, while $\beta$ slightly decreases and c remains nearly unchanged as change in Fe content. These trends are to difference between synthetic and natural clinopyroxenes. This fact is also recognized in IR spectra which show a slight shift of several absorption bands toward lower wavenumber region with increasing Fe content.