• Imaging Science in Dentistry
• /
• 제37권3호
• /
• pp.133-138
• /
• 2007

Purpose: The purpose of this study was to evaluate the morphologic features of posterior edentulous mandible for Korean patients using cross-sectional CT images. Materials and Methods: Computed tomographic cross-sectional views taken in 2004 and 2005 at Seoul National University Dental Hospital were analyzed by an oral and maxillofacial radiologist. Four indices were measured to meet the purpose of this study: 1) the horizontal distance between the alveolar crest and mandibular canal (Type), 2) the angle of the mandibular long axis (Angle), 3) the bucco-lingual location of mandibular canal, and 4) the depth of the submandibular fossa. The averages and standard deviations of the measurements were compared according to the location (the first and second molar area) and sex of the patients. Results: Statistically significant difference was found in Type, Angle, and submandibular fossa depth between the first and second molar area (p<0.05). However, there was no significant difference between men and women in any of the measured indices. Most of the mandibular canals were located in lingual side of posterior mandible. Conclusion: More care should be taken when an implant is installed on the mandibular second molar area.

• Restorative Dentistry and Endodontics
• /
• 제46권1호
• /
• pp.2.1-2.8
• /
• 2021

Objectives: New premixed bioceramic root repair materials require moisture for setting. Using micro-computed tomography (micro-CT), this study evaluated the filling ability and volumetric changes of calcium silicate-based repair materials (mineral trioxide aggregate repair high-plasticity [MTA HP] and Bio-C Repair, Angelus), in comparison with a zinc oxide and eugenol-based material (intermediate restorative material [IRM]; Dentsply DeTrey). Materials and Methods: Gypsum models with cavities 3 mm deep and 1 mm in diameter were manufactured and scanned using micro-CT (SkyScan 1272. Bruker). The cavities were filled with the cements and scanned again to evaluate their filling capacity. Another scan was performed after immersing the samples in distilled water for 7 days to assess the volumetric changes of the cements. The statistical significance of differences in the data was evaluated using analysis of variance and the Tukey test with a 5% significance level. Results: Bio-C Repair had a greater filling ability than MTA HP (p < 0.05). IRM was similar to Bio-C and MTA HP (p > 0.05). MTA HP presented the largest volumetric change (p < 0.05), showing more volume loss than Bio-C and IRM, which were similar (p > 0.05). Conclusions: Bio-C Repair is a new endodontic material with excellent filling capacity and low volumetric change. The gypsum model proposed for evaluating filling ability and volumetric changes by micro-CT had appropriate and reproducible results. This model may enhance the physicochemical evaluation of premixed bioceramic materials, which need moisture for setting.

• Journal of Periodontal and Implant Science
• /
• 제53권4호
• /
• pp.248-258
• /
• 2023

Purpose: This study aimed to characterize the early stages of periodontal disease and determine the optimal period for its evaluation in a mouse model. The association between the duration of ligation and its effect on the dentogingival area in mice was evaluated using micro-computed tomography (CT) and histological analysis. Methods: Ninety mice were allocated to an untreated control group or a ligation group in which periodontitis was induced by a 6-0 silk ligation around the left second maxillary molar. Mice were sacrificed at 1, 2, 3, 4, 5, 8, 11, and 14 days after ligature placement. Alveolar bone destruction was evaluated using micro-CT. Histological analysis was performed to assess the immune-inflammatory processes in the periodontal tissue. Results: No significant difference in alveolar bone loss was found compared to the control group until day 3 after ligature placement, and a gradual increase in alveolar bone loss was observed from 4 to 8 days following ligature placement. No significant between-group differences were observed after 8 days. The histological analysis demonstrated that the inflammatory response was evident from day 4. Conclusions: Our findings in a mouse model provide experimental evidence that ligature-induced periodontitis models offer a consistent progression of disease with marginal attachment down-growth, inflammatory infiltration, and alveolar bone loss.

• 대한영상의학회지
• /
• 제83권3호
• /
• pp.669-679
• /
• 2022

목적 필터보정역투영(filtered back projection; 이하 FBP)법과 적절한 커널로 재구성된 소아 저선량 안면 컴퓨터단층촬영(이하 CT)의 시행 가능성을 평가하고자 한다. 대상과 방법 응급실에서 안면 CT를 촬영한 10세 이하 환자의 임상 및 영상 데이터를 후향적으로 검토하였다. 환자들을 두 그룹으로 나누었다: 고정된 80 kVp와 자동관전류변조기법을 사용하는 저선량 CT (low-dose CT, 그룹 A, n = 73), 고정된 120 kVp와 자동관전류변조기법을 사용하는 표준 선량 CT (standard-dose CT, 그룹 B, n = 40). 모든 영상은 FBP로 재구성되었다: 그룹 A는 뼈와 연조직 커널을, 그룹 B는 뼈 커널을 이용하였다. 두 그룹의 영상 잡음, 신호대잡음비(signal-to-noise ratio; 이하 SNR), 그리고 대조대잡음비(contrast-to-noise ratio; 이하 CNR)를 비교하였다. 두 명의 영상의학과 의사가 뼈와 연조직의 영상 품질에 대해 주관적으로 점수화하였다. 용적 CT 선량지수(CT dose index volume)와 선량길이곱(dose length product)을 기록하였다. 결과 영상 잡음은 그룹 A가 그룹 B보다 높았다(p < 0.001). 연조직 커널을 사용한 그룹 A 영상에서 가장 높은 SNR과 CNR을 보였다(p < 0.001). 뼈의 정성적 평가에서 뼈 커널 영상들을 비교하면 그룹 A가 그룹 B보다 비슷하거나 높은 점수를 보였다. 연조직의 정성적 평가에서 연조직 커널을 이용한 그룹 A와 뼈 커널에 연조직 창 설정을 이용한 그룹 B 사이에는 통계적으로 유의한 차이가 없었다(p > 0.05). 그룹 A는 그룹 B에 비해 방사선 선량이 76.9% 감소했다(3.2 ± 0.2 mGy vs. 13.9 ± 1.5 mGy, p < 0.001). 결론 연조직 커널 영상을 FBP로 재구성된 전통적인 CT에 추가함으로써 영상 품질을 유지하면서 소아 저선량 안면 CT 프로토콜을 사용할 수 있다.

• Radiation Oncology Journal
• /
• 제23권3호
• /
• pp.169-175
• /
• 2005

목적: 방사선 치료 시 3차원 영상 획득에 방사선치료 전용으로 개발된 모의 CT를 사용하고 있으나 아직까지도 많은 병원에서는 일반 진단용 CT를 이용하고 있다. 따라서 본 연구에서는 21명의 유방암 환자를 대상으로 모의치료, 진단용 CT기를 이용한 CT 스캔, 및 치료 과정 사이의 준비 오차를 분석하였다. 대상 및 방법: 준비 오차는 isocenter, SSD, CLD, 및 수술 시 삽입된 클립의 위치들의 변화를 계산하여 분석하였다. 모의조사에서 얻어진 x-ray 영상에 나타난 해부학적 구조물과 CT 스캔 시 isocenter를 표시하기 위해 환자의 몸에 부착된 marker를 기준으로 정해진 isocenter에서 얻은 DRR 영상상의 구조물을 비교하여 잘 일치하지 않을 경우 새로운 isocenter가 정해졌고 이러한 isocenter의 위치 변화를 계산하였다. 결과: 21명의 환자 중 7명의 경우 DRR상과 모의치료 필름상의 해부학적 구조물이 21명의 환자 중 7명이 일치하지 않았으므로 치료계획을 실행하기에 앞서 새로운 isocenter를 정하였다. Isocenter 이동을 근거로 계산된 진단용 CT와 모의 치료간에 발생되는 평균 준비오차의 표준편차는 횡측 방향으로 2.3 mm, longitudinal 방향으로 1.6 mm, 그리고 AP 방향으로 1.6 mm이다. 모의치료와 CT data의 AP 방향 및 tangential 방향에서 측정된 SSD 값의 평균오차 및 표준편차는 각각 $1.9{\pm}2.3\;mm$ 및 $2.8{\pm}3.7\;mm$이다. 모의치료와 DRR간의 CLD 오차의 변화범위는 0에서 6 mm 이고 모의치료와 portal 영상간의 오차범위는 0에서 5 mm이다. 클립을 기준으로 계산된 그룹의 systematic error는 횡측 방향으로 1.7 mm, AP 방향으로 2.1 mm, 그리고 SI 방향으로 1.7 mm이다. 결론: 연구 결과 SSD, CLD, 클립의 움직임 및 isocenter의 위치변화 측면에서 분석될 경우 그다지 큰 오차는 발생하지 않았음을 보여준다. 그러므로 본 연구결과 유방암 환자의 경우 진단용 CT를 사용한다 하더라도 준비오차는 모의 CT를 사용하는 경우와 비교하여 차이가 없음을 알 수 있다. 그러나 모의치료와 CT스캔 사이의 준비오차를 감소하기 위해서는 CT 영상 획득 시 환자 위치고정에 특별한 주의를 기울여야 한다.

• 대한영상의학회지
• /
• 제81권6호
• /
• pp.1436-1447
• /
• 2020

목적 간질부종성 췌장염으로 진단된 환자군에서 괴사성 췌장염으로의 진행을 예측할 수 있는 입원 당시 초기 임상소견 및 CT 소견을 알아보고자 한다. 대상과 방법 간질부종성 췌장염으로 진단되어 입원 당시 및 14일 이내 추적 조영증강 CT를 시행한 178명의 환자를 대상으로 하였다. 두 명의 영상의학 전문의가 추적 CT를 분석하여 간질부종성 또는 괴사성 췌장염을 결정하였다. 입원 당시 혈액검사 소견도 기록하였다. 간질부종성-간질부종성 췌장염 환자군과 간질부종성-괴사성 췌장염 환자군 간에 임상소견, CT 소견 및 혈액검사 소견들을 비교하였다. 다변량 분석도 시행하였다. 결과 간질부종성-간질부종성 췌장염 환자군은 112명, 간질부종성-괴사성 췌장염 환자군은 66명이었다. 알코올성 췌장염의 비율은 간질부종성-괴사성 췌장염 환자군이 더 높았다. 입원 당시 CT 소견 중 췌장주위 액체저류, 췌장실질의 비균질성은 간질부종성-괴사성 췌장염 환자군에서 더 흔하게 나타났다. 입원 당시 혈액검사 소견 중 혈청 C-반응성 단백 수치 및 백혈구수가 간질부종성-괴사성 췌장염 환자군에서 더 높게 나타났다. 다변량 분석을 시행했을 때 췌장주위 액체저류와 췌장실질의 비균질성 소견이 두 환자군을 구별하는데 유의한 인자로 나타났다. 결론 초기 CT상 간질부종성 췌장염으로 진단된 환자군에서 CT 소견 중 췌장주위 액체저류, 췌장실질의 비균질성은 괴사성 췌장염으로의 진행을 예측하는 데 도움이 된다.

• Tuberculosis and Respiratory Diseases
• /
• 제71권6호
• /
• pp.438-444
• /
• 2011

Background: Lung abscess is necrosis of the pulmonary parenchyma caused by microbial infection. At present, clinical outcomes after treatment are good. However, the pulmonary parenchymal changes on the chest computed tomography (CT) after treatment are not well known. We studied the changes of pulmonary parenchyma on plane chest radiography and chest CT in patients with lung abscess following the administration of antibiotics. Methods: We retrospectively reviewed 39 patients who had lung abscess with or without combined pneumonia from January 2006 to July 2010. We studied the therapeutic response in plane chest radiography of them at 1, 2, or more than 3 months following treatment. If any chest CT of them during the study period, we reviewed. Results: Mean age of the patients was about $61.3{\pm}11.2$. Mean duration of antibiotics administration was about $36.7{\pm}26.8$ days. After 3 months of following plane chest radiography, 10 patients (36%) showed without residual sequelae among 28 patients. Findings from other patients showed decrease in densities (11 patients, 39%), fibrostreaky sequelae (4 patients, 14%) and bullae (3 patients, 10%). After more than 2 months, chest CT was checked only in 7 patients. Among the 7 patients, 4 patients showed no residual lesion, 3 patients showed decreased densities on plane chest radiography. Chest CT revealed fibrostreaky densities in 2 patients, ground glass opacities in 3 patients, bullous formation in 1 patient, and cystic bronchiectasis in 1 patient. Conclusion: After more than 2 months following treatment for lung abscess even though there were no lesions on plane chest radiography, chest CT showed fibrostreaky or ground glass opacity.

• Asian Pacific Journal of Cancer Prevention
• /
• 제15권22호
• /
• pp.9879-9884
• /
• 2014

Aim: The purpose of the current study was to conduct a systematic review of the published literature to evaluate the diagnostic accuracy of FDG-PET, PTE/CT, MRI and scintigraphy for multiple myeloma related bone disease. Methods: Through a search of PubMed, EMBASE, and the Cochrane Library, two reviewers independently assessed the methodological quality of each study. We estimated pooled sensitivity, specificity, positive and negative likelihood ratios (PLR and NLR), and two sample Z-tests were conducted to evaluate for differences in sensitivity, specificity, area under the curve (AUC), and the $Q^*$ index between any two diagnostic modalities. Results: A total of 17 studies were reviewed. The MRI had a pooled sensitivity of 0.88, specificity of 0.68, AUC of 0.897, and $Q^*$ index of 0.828, whereas for MIBI, the corresponding values were 0.98, 0.90, 0.991, and 0.962, respectively, and for bone scan, they were 066, 0.83, 0.805, and 0.740, respectively. The corresponding values of MIBI were 0.98, 0.90, 0.991, and 0.962, respectively. For PET and PET/CT, the values were 0.91, 0.69, 0.927 and 0.861, respectively. Statistically significant differences were not found in the sensitivity, specificity, AUC, and $Q^*$ index between MRI, scintigraphy, FDG-PET and PET/CT. Conclusions: On the condition that X ray is taken as a reference in our study, we suggested that FDG-PET, PTE/CT, MRI and scintigraphy are all associated with high detection rate of bone disease in patients with MM. Thus, in clinical practice, it is recommended that we could choose these tests according to the condition of the patient.

• 자원환경지질
• /
• 제28권1호
• /
• pp.1-8
• /
• 1995

The smectite-rich clays were found locally in Paleozoic calcareous sedimentary rocks in the Samcheok area. Their occurrences were investigated in detail, and the physico-chemical properties of the clays were also determined by X-ray diffraction, chemical analysis, thermal analysis and cation exchanging experiment. The smectite clays occur as the fissure filling dyke developed in calcareous sedimentary rock and as alteration products of intrusive rhyolite. Most of clays occur at the contact between the sedimentary rock and the rhyolite, and the alteration zone was observed only in rhyolite body close to the contact. Judging from their occurrences, it is believed that the smectite-rich clays in this area were formed by the hydrothemal alteration. The smectite clays from the area are mainly composed of Ca-montmorillonite, and associated with small quantities of quartz, opal-CT and feldspar. The montmorillonites from this area are lower in Fe content, and higher in exchangeable Ca ion, compared to those of bentonite from the Yangnam-Yeongil area.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.360-360
• /
• 2011

In this work, SUS310S used for valve plate assembly was electron beam (EB) welded to determine the influence of the parametric conditions on the characteristics of the weld and to minimize porosity and micro-fissures among others. The evolution in the weld geometry and microstructure was examined as a function of the process conditions such as beam current and focusing current under a constant welding speed and accelerating voltage. The integrity of the EB welds in SUS310S was examined for defects (e.g. cracking, porosity, etc.), adequate penetration depth, and tolerable weld width deviation for the various welding conditions. Optical microscopy (OM), x-ray photoelectron spectroscopy analysis (XPS), scanning electron microscopy (SEM) and 3D micro-computed tomography (Micro-CT) for the cross section analysis of the electron beam welded SUS310S were utilized. The tensile strength and hardness were analyzed for the mechanical properties of the EB weld. At the 6 kV accelerating voltage, it was determined that a satisfactory penetration depth and desirable weld width deviation requires a beam current of 30 mA and a focusing current of 0.687 A at the welding speed of 25 mm/sec.