• 제목/요약/키워드: X-band frequency

검색결과 360건 처리시간 0.025초

고조파 제어 회로를 이용한 X-대역 전력 증폭기의 효율 개선에 관한 연구 (A Study on Efficiency Improvement of X-Band Power Amplifier Using Harmonic Control Circuit)

  • 김형종;최진주;김동윤;나형기
    • 한국전자파학회논문지
    • /
    • 제21권9호
    • /
    • pp.987-994
    • /
    • 2010
  • 본 논문에서는 간단하면서도 효과적인 능동적인 로드 풀(active load-pull) 방법을 제시하고, 고조파의 임피던스 성분을 제어하는 회로를 사용하여, X-대역 전력 증폭기의 효율을 개선시킬 수 있는 방법에 관하여 연구하였다. 제안된 능동적인 로드 풀 시스템은 크게 방향성 결합기와 위상 변위기, 단락 회로, 그리고 전력 증폭기로 구성되어 있으며, 전통적인 능동적인 로드 풀 방법에 비해 반사 계수가 1인 지점까지 임피던스를 쉽게 가져다 놓을 수 있다. 본 논문에서 사용된 소자는 Mitsubishi사의 GaAs FET인 MGF1801이며, 9 GHz의 동작 주파수에서 class-A일 때, 21.65 dBm의 출력 전력과 24.9 %의 드레인 효율을 얻었고, class-AB일 때, 21.46 dBm의 출력 전력과 53.3%의 드레인 효율을 얻었다. 고조파 제어 회로는 실험에 사용된 초고주파 부품의 주파수 대역폭의 한계로 인해, 2차와 3차 항 성분까지만 고려하여 설계하였으며, class-AB에서, 6.4 %의 효율이 증가된 것을 확인하였다.

동향분석ITS 무선통신을 위한 EBG 구조를 적용한 자동차용 WAVE 안테나 시스템 성능향상연구 (A Study on Improving Performance of the Vehicular WAVE Antenna System using the EBG structure for ITS wireless communications)

  • 연규봉;이두호;황진규;양태훈
    • 한국ITS학회 논문지
    • /
    • 제16권1호
    • /
    • pp.176-185
    • /
    • 2017
  • 본 논문은 지능형교통시스템(ITS: Intelligent Transport System)을 위한 V2X 간의 무선통신시스템에 적용되는 WAVE(Wireless Access in Vehicle Environments) 안테나 시스템에 대한 연구이다. 5.825~5.9GHz 주파수대역의 WAVE 통신은 차량이 주행하면서 도로 인프라에 설치되어 있는 기지국과 다른 차량에 장착되어 있는 단말기간의 무선통신에 사용할 수 있도록 하는 표준화된 프로토콜이다. 최근의 WAVE 통신시스템 연구에서는 통신거리에 따른 통신성능을 향상시키기 위해서 기지국과 차량 단말기 기술개발 위주로 연구되고 있으나, 본 논문에서는 시스템 성능 개선 가능성을 검토하고자 차량 루프에 장착가능한 자동차용 안테나 시스템의 설계구조 개선에 대한 연구를 진행하였다. WAVE 안테나 베이스 구조에 EBG(Electro Band-Gap) 구조를 적용하여 비교시뮬레이션을 통해 반사손실이 저감되어 성능이 향상되는 것을 확인하였다.

위 이형성 상피 병변의 클론성에 대한 분자병리학적 연구 (Clonality Assay of Dysplastic Epithelial Lesions of the Stomach)

  • 최호수;김미숙;박재우;박창수;김영진;정상우
    • Journal of Gastric Cancer
    • /
    • 제1권3호
    • /
    • pp.129-135
    • /
    • 2001
  • Purpose: Dysplasia or flat adenoma of the stomach is regarded as a precancerous lesion. However, the frequency and the evolutionary process of malignant transformation of gastric dysplasia are still debated. In order to see whether the lesion was a monoclonal or a polyclonal proliferation, clonality was assayed by X-linked HUMARA polymorphism. Materials and Methods: DNA was extracted from the paraffin-embedded tissue of 16 consecutive cases of endoscopic biopsy, eight of which supplied both dysplastic and nondysplastic tissue for comparison. HUMARA was amplified by PCR with or without pretreatment with methylationsensitive restriction enzyme, HpaII. The amplification products were electrophoresed on polyacrylamide gel and silver-stained. Results: Among the 16 cases, 13 cases were informative and 3 cases noninformative. Of the 13 cases, one case showed skewed lyonization, rendering 12 cases to be analyzed further. A monoclonal band pattern was noted in 2 cases, and a polyclonal band pattern in 10 cases. A review of the histopathologies of the monoclonal and the polyclonal cases did not reveal features discriminating the two groups. Conclusion: These results suggest that gastric dysplasia is a disease entity heterogeneous in the genetic level, and many cases may be non-neoplastic.

  • PDF

전파천문관측용 400MHz 광-대역 상관기 보드의 설계 및 제작 (Development of 400MHz Wide-Band Correlation Board for Radio Astronomy Spectrometer)

  • Lee, Chang-hoon;Park, Han-Kyu;Kim, Kwang-Dong;Koo, Bon-Chul;Byun, Do-Young;Han, Seog-Tae;Kim, Tae-Sung
    • 전자공학회논문지SC
    • /
    • 제41권2호
    • /
    • pp.37-44
    • /
    • 2004
  • 본 논문에서는 전파천문 분야에서 특이한 전파원의 서베이 연구나, 외부은하의 스펙트럴 선 관측연구에 필요한 자기상관분광기 형태의 광-대역 전파분광기 제작에 있어서 가장 핵심적인 역할을 하는 상관기 보드를 설계, 제작하였다. 본 연구에서는 미국 국립천문대(NRAO)에서 개발된 QUAINT 상관기 칩을 사용하여 최대 100 ㎒의 동작 속도로 최대 400 ㎒ 대역폭을 갖는 중간주파수 신호를 분광할 수 있는 상관기 보드를 설계, 제작하였다. 제작된 상관기 보드의 성능시험을 위해 1.67 ㎒와 0.5 ㎒의 구형파를 인가하여 자기상관계수를 구하고, FFT를 취한 결과 이론적인 상관결과와 거의 같은 결과를 얻었다.

Isolation 특성이 좋은 Orthogonal Mode Transducer 설계와 제작 (Design and Fabrication of a Simple Orthogonal Mode Transduce with Good Iolation)

  • 오이석;이진원;홍진영
    • 한국전자파학회논문지
    • /
    • 제11권6호
    • /
    • pp.914-919
    • /
    • 2000
  • 이 논문에서는 Z-밴드용 간단한 구조의 OMT (orthogonal mode transducer)가 소개되다. 이 OMT는 몇 개의 가는 유도 봉을 이용하여 한 편파를 주어진 방향으로 유도하고. 또한 다른 직각 편파를 유도 봉을 이용하여 다른 방향으로 유도하도록 설계되었다. 이 OMT는 유도 봉들이 있는 T자 형태의 도파관 부분과 두 도파관 연결부분으로 구성되어 있고, 한 안테나와 두 개의 어댑터들과 연결되도록 세 플랜지를 갖고 있다. 유도 봉의 최적개수와 최적 위치는 CAD인 HFSS를 이용하여 수치적으로 얻었다. 제작된 OMT에서 두 폄파간의 isolation은 9.5GHz와 10.5GHz 주파수 밴드에서 42.8dB보다 높았으며, 반사계수는 -17.5dB보다 낮았다. 이 OMT는 polarimetric scatterometer 시스템에 사용되는 polarimetric 안테나에 사용되어질 수 있다.

  • PDF

마이크로스트립 선로의 실효 유전률에 관한 실험적인 연구 (An Experiment Study on the Effective Dielectric Constant of Microsrtip Line)

  • 홍강지;하천주
    • 대한전자공학회논문지
    • /
    • 제19권3호
    • /
    • pp.13-18
    • /
    • 1982
  • 본 논문은 마이크로스트립 선로의 실효 유전률에 관한 실험적인 연구이다. 자유 공간 파장대 관내 파장비의 2승으로 주어지는 실효 유전률을 테프론 유전체판으로 만든 공진기의 공진 현상을 이용하여서 측정하고 이것과 마이로스트립 선로상의 전류 분포를 Fourier 변환하여서 얻은 이론 계산치와를 비교 고찰하여 제작된 원형및 타원형 공진기로 부터 얻어진 실험치와 이론치가 8∼12GHz범위의 X-Band에서 # =1일때 거의 일치하는 결과를 얻을 수 있었다.

  • PDF

볼락의 형태학적 특징과 음향반사강도 특성 (Morphological Properties and Target Strength Characteristics for dark banded rockfish (Sebastes inermis))

  • 황보규
    • 수산해양기술연구
    • /
    • 제51권1호
    • /
    • pp.120-127
    • /
    • 2015
  • Morphological properties of dark banded rockfish (Sebastes inermis) were analysed to investigate its acoustic scattering characteristics. Total of 18 live samples was prepared for X-ray photos and collected morphological coordinates of their body and swim bladder shapes. Kirchhoff-ray mode model was used to calculate acoustic scattering pattern for broad-band frequency range. Inclination of swim bladder ranged from 17 to 30 and the averaged value was about $25.2^{\circ}$ (S.D.(standard deviation)=3.15). There were no any tendency of increase or decrease in volume and area ratio of swim bladder to fish body and ranged from 2.2 % to 4.43 % and 14.85 % to 21.31 %, respectively. The averaged value of volume and area ratio was 3.13 % (S.D.=0.52) and 17.6 % (S.D.=1.5). $b_{20}$ values were -69.01 for 38 kHz, -69.83 for 70 kHz, -70.17 for 120 kHz and -70.93 for 200 kHz, recpectively. Broadband acoustic patterns of dark banded rockfish for 20 ~ 200 kHz were similar among samples and they reflected size and morphological properties of fish species.

OH PLIF를 이용한 부분 예혼합 화염의 화염구조에 관한 실험적 연구 (An Experimental Study on the Flame Structure of Partially Premixed Flame using OH PLIF)

  • 이승영;이종호;전충환;장영준
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2001년도 춘계학술대회논문집D
    • /
    • pp.54-59
    • /
    • 2001
  • OH radical concentration have been measured in a methane-air partially premixed flames using PLIF. Excitation lines were selected $Q_{1}(6)$ branch, (1,0) band. The system is consisted of Nd:YAG laser, dye laser and frequency doubler to make pump beam for OH radical. On the direct photographs, flame height increases as fuel flow rate and equivalence ratio increase. And on the PLIF images, OH radical is distributed from premixed flame front to nonpremixed flame front through the flame structure with all equivalence ratio. OH overall concentrations increase with equivalence ratio. At the stoichiometric equivalence ratio, the peak of OH radical concentration exists strongly near the inner cone. As equivalence ratio is changed to richer, OH radical distribution goes thinly and the peak is increased as longitudinal direction. As the flow goes to the downstream, OH radical concentration decreases and broadens, because OH radical reacts with another species after OH formation at the initial oxidization. This phenomenon resembles radial distribution. At the l00cc fuel flowrate, the radial peak of OH radical exists from x/R=l.0 to 1.5.

  • PDF

유압 브레이커의 구조 소음.진동 저감을 위한 브래킷 하우징의 구조 개선에 관한 연구 (A Study on the Structure Improvement of Bracket Housing for Structural Noise and Vibration Reduction in Hydraulic Breaker)

  • 김봉석;김민기;변동우;이성민;이수훈
    • 한국정밀공학회지
    • /
    • 제23권11호
    • /
    • pp.108-115
    • /
    • 2006
  • A hydraulic breaker is widely utilized for many civil engineering areas for the purpose of destroying objects such as rocks, concrete, or road. However, since the high-level noise and vibration by a hydraulic breaker is one of the major sources of environmental noise and recently the environmental regulations on construction equipments are also getting more strengthened, in order to solve such problems, it is certainly necessary to design and develop a hydraulic breaker with low noise and low vibration. This research is to understand the noise characteristics through the noise test and acoustic analysis of the bracket housing in a hydraulic breaker and to identify the element part to be modified based on the result of the element contribution analysis. An improved breaker model including X-typed rib shows the result of low-noise level within target frequency band compared with a commercial breaker model.

고에너지 음향환경시험 튜브 개발 (Development of High Intensity Progressive Wave Tube)

  • 김영기;김홍배;문상무;우성현;임종민
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2005년도 춘계학술대회논문집
    • /
    • pp.962-965
    • /
    • 2005
  • A high intensity progressive wave tube is installed at Korea Aerospace Research Institute (KARI) for acoustic environmental tests. The test facility has 700 mm x 800 mm cross-sectional area, and provides acoustic environment of 165 dB over the frequency range of $25Hz{\sim}10,000Hz$. The facility consists of a 6 m long acoustic wave tube, acoustic power generation systems, gases nitrogen supply systems, and acoustic control systems. This paper describes how the basic parameters of the facility and power generation systems are controlled to meet the requirement of the test. The shape and length of the tube has been designed by using the size of test objects and the wave propagation characteristics of the tube. The capacity of acoustic power generation systems is determined by the energy conversion of acoustic wave and the efficiency of acoustic modulators. Moreover, the paper introduces test run results of the tube. Overall of 163dB has been generated by using the test facility.

  • PDF