• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.132-132
• /
• 2011

The sheet resistance (Rs) of undoped GaN films on AlN/c-plane sapphire substrate was investigated in which the AlN films were grown by R. F. magetron sputtering method. The Rs was strongly dependent on the AlN layer thickness and semi-insulating behavior was observed. To clarify the effect of crystalline property on Rs, the crystal structure of the GaN films has been studied using x-ray scattering and transmission electron microscopy. A compressive strain was introduced by the presence of AlN nucleation layer (NL) and was gradually relaxed as increasing AlN NL thickness. This relaxation produced more threading dislocations (TD) of edge-type. Moreover, the surface morphology of the GaN film was changed at thicker AlN layer condition, which was originated by the crossover from planar to island grains of AlN. Thus, rough surface might produce more dislocations. The edge and mixed dislocations propagating from the interface between the GaN film and the AlN buffer layer affected the electric resistance of GaN film.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.61-62
• /
• 2000

We have studied the molecular orientation by the phase transitions of the chiral smectic liquid crystals, 4-(1-Trifluoromethyl-6-ethoxy-hexyloxycarbonlphenyl)-4-nonyloxybiphenyl-4-carbo-xylate (R-TFMEOHPNBC) to seek the original solution of the zig-zag defect using two different experimental techniques; optical system and x-ray scattering. The phase sequence is gamma ferroelectric $(SmC{\gamma}\;^*)$ ${\rightarrow}$ smectic A (SmA) ${\rightarrow}$ isotropic (I). Existence of two layer spacing at chiral smectic phase gives a possibility of the molecular orientation in two different tilt angles, ${\theta}\;_1$ and ${\theta}\;_2$, which are separated each other to the layer normal at a given temperature. The gamma ferroelectric-like phase is, first, discovered in the single compound.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.399-402
• /
• 2005

We have studied the Pixel Isolated Phase Separated Composite Organic Film (PI-PSCOF). The PI-PSCOF can be made by the anisotropic phase separation between Ferroelectric Liquid Crystals and Pre-polymer materials by irradiating the UV with optimizing its intensity and time. In the technology, the FLC molecules are isolated in pixels where FLCs are surrounded by the inter-pixel vertical polymer walls and the horizontal polymer films on the upper substrate. The good merits of this technology are fast response time, and good mechanical and thermal stability against external high pressure and temperature. We will compare the results obtained from FLC, PSCOF, and PI-PSCOF modes by using the electro-optic measurement and x-ray scattering, and mechanical method. We believe that the PI-PSCOF technology can be a best candidate for future Flexible Display Applications.

• Macromolecular Research
• /
• v.13 no.6
• /
• pp.499-505
• /
• 2005

Ordered mesoporous materials with a hydrothermally-stable, protozeolitic framework were prepared by exploring the direct conversion of inorganic species based on co-surfactant templating systems. To confer hydrothermal stability on the mesoporous aterials, the organic-inorganic hybrids were heat-treated in strongly basic media. Co-surfactant templating systems of cetyltrimethylammonium bromide [$C_{16}H_{13}(CH_{3})_{3}$NBr, CTAB] with 1,3,5-trim­ethylbenzene (TMB) or a nonionic block copolymer of poly(ethylene oxide )-b-poly(propylene oxide )-b-poly(ethyl­ene oxide) ($EO_{20}PO_{70}EO_{20}$) were employed to improve the hydrothermal stability of the organic-inorganic self-assembly during the solid rearrangement process of the inorganic species. The mesoscopic ordering of the pore structure and geometry was identified by X-ray diffraction, small angle neutron scattering and electron microscopy.

• Journal of the Semiconductor & Display Technology
• /
• v.3 no.4
• /
• pp.5-11
• /
• 2004

Optical properties of PET(Polyethylene terephthalate), PC(Polycarbonate), Acrylic resin and PE(Polyethylene) sheets were studied as a function of heat treating temperature of $60^{\circ}C$ to $150^{\circ}C$. By the heat treatment, optical properties of transmittance, absorbance, and reflectance showed a considerable change with different ways according to the materials. To understand the reason of optical property change, X-ray diffraction and surface morphology were also investigated. It was observed that small crystallite and pore that can cause scattering largely affect the transmittance. It was suggested that change of surface chemical bond induce the reflectance variation.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.459-459
• /
• 2013

Si (111) 기판 위에 plasma assisted molecular beam epitaxy 법으로 Si과 Mg doping된 GaN 나노막대를 각 각 성장하고 나노막대의 모양과 광학적 특성을 조사하였다. Si이 doping된 GaN 나노막대는 biaxial m-plane 방향의 변화로 별 모양을 갖는 것을 관찰하였고 Mg doping된 GaN 나노막대의 지름은 줄어드는 것을 scanning electron microscopy로 확인하였다. 본 연구에서는 이러한 변화의 원인을 stress 때문으로 보고 x-ray diffraction과 raman scattering 측정을 통하여 구조적 변화를 조사하였다. 또한, stress에 의한 GaN 나노막대의광학적 특성 변화를 photoluminescence을 통하여 조사하였다. Doping한 GaN 나노막대의 특성조사를 통해 GaN 나노막대 성장 시 발생되는 stress의 영향을 이해하는데 중요한 정보를 제공할 것이다.

• Korean Membrane Journal
• /
• v.1 no.1
• /
• pp.8-24
• /
• 1999

free volume in polymers is defined as the difference of the specific volume and the volume which is not available for the particular molecular motion which is responsible or the process that is considered . Relations between free volume and viscosity free volume and diffusion coefficient are pre-sented both in the case of simple low molecular weight liquids and in the case of polymers. Molecular models and free volume models are reminded starting from the equilibrium state equation of Simha and Somcynski. The non equilibrium situations of specific volume of glass polymers below Tg are shown introducing different relaxation volume equations which involve different material's parameters and con-cept of the fictitious temperature. The diffusivity equations of Vrentas and Duda are introduced both for the glassy and rubbery states. The possibility of introducing time relaxation functions is also suggested. The importance of finding experimental evidences of the free volume is stressed. highlights of the free volume measurement methods are given in particular as to dilatometry photocromy fluorescence electron spin resonance small angle X-ray scattering positron annihilation spectroscopy.

• Journal of the Korean Vacuum Society
• /
• v.8 no.2
• /
• pp.111-115
• /
• 1999

The structural characteristics of an epitaxial $BaTiO_3$ film on MgO(001) grown by sputtering were studied as a function of temperature using in-situ, real time synchrotron x-ray scattering experiments. We found that the as-grown film was single c-domain but strained at room temperature and tetragonally distorted with the c-axis normal to the film surface. Interestingly, its lattice parameters were found to be expanded in both the in-plane and the out-of -plane directions, i.e. biaxially, comparing with those of a bulk $BaTiO_3$ . More importantly, as it was heated up to $600^{\circ}C$, the tetragonal structure was kept up through without and any phase transition, which is usually observed in other epitaxial ferroelectric thin films.

• Journal of the Korean Ceramic Society
• /
• v.29 no.10
• /
• pp.779-784
• /
• 1992

In producing cordierite glass-ceramics by sintering, following experiments were conducted in order to determine the optimum heat-treatment schedule for high-crystallinity and dense sintered body. The glass composition of 11.67MgO-29.46Al2O3-52.88SiO2-5P2O5-1B2O3 (wt%) was selected on the basis of the early experiment. The 3-step heat treatment schedule was determined by the results of DTA, Dilatometric measurement and high-temperature XRD, where the particle-size-controlled glass powder was used. The degree of densification and the crystallinity were evaluated by the measurement of the bulk density and X-ray scattering intensity. The specimen fired with the optimum conditions showed ${\alpha}$-cordierite phase, relative density ∼98%, crystallinity ∼92%, thermal expansion coefficient ∼30${\times}$10-7/$^{\circ}C$, dielectric constant ∼5.5 and resistivity ∼1.0${\times}$1012 {{{{ OMEGA }}cm, respectively.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.05a
• /
• pp.112-113
• /
• 2019

Recently, supplementary cementitious materials such as blast-furnace slag, fly ash and silica fume have been widely used as substitutes for cementitious materials. In this study, the deformation behavior of compressive loading of C₃S paste with 50% fly ash was analyzed by X-ray scattering data and pair distribution function analysis. The obtained results were compared with 131-day-old pure C₃S paste. The Ca(OH)₂ of the C₃S-FA paste showed almost complete elastic behavior, consistent with the deformation behavior of the r-range of 20 to 40, and the C-S-H phase contributed to the range of PDF r-range of less than 20. In addition, C-S-H of C₃S-FA showed greater deformation resistance than C₃S paste.