• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.1
• /
• pp.91-96
• /
• 2010

Many studies have shown that there is a strong relationship between the congenitally missing primary teeth and their succedaneous permanent teeth. However, especially in case of lower anterior region, we can observe the existence of permanent teeth even though their precedent primary teeth were missed at times. The purpose of this study was to reveal the relationship between the congenitally missing primary lower anterior teeth and their succedaneous permanent teeth in Korean children. Total of 14,307 children, under 6 years of age, who attended the department of pediatric dentistry, Seoul National University Dental Hospital, Seoul, Korea from January 1st 2005 to September 5th 2008 were radiologically examined using the panoramic x-ray in order to analyze the relationship between the congenitally missing primary lower anterior teeth and their succedaneous permanent teeth. The results were as follows : 1. The prevalence of congenitally missing lower anterior teeth in primary dentition was 0.24%. The odds ratio of both the primary and permanent anterior teeth being present was 7163.5 and only the permanent anterior teeth being present was 0.79. 2. The percentage of all succedaneous permanent teeth being present was 44.12% in cases of missing lower primary anteriors. The odds ratio of at least one succedaneous permanent teeth being present in cases of bilateral primary anterior teeth missing was 1.57 times more common than in cases of unilateral primary teeth missing. 3. The odds ratio of primary missing teeth being unilateral was 2.2 times higher in females. Moreover, the odds ratio of succedaneous permanent teeth being present in cases of primary teeth missing was 2.22 times higher in males.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.24 no.4
• /
• pp.325-335
• /
• 2008

The junction between resilient denture liner and the denture base is difficult to finish and polish due to difference of the physical property of the materials. Gaps tend to be formed during finishing and polishing procedures. The purpose of this study was measuring the width of junctional gap between $Molloplast-B^{(R)}$ and denture base material after finishing and polishing procedure, and evaluating the effect of method and direction on gap width. $Molloplast-B^{(R)}$ was processed (according to the manufacturer's instruction) against Lucitone $199^{(R)}$ acrylic resin. 50 specimens were fabricated with a raised center section. All of specimens were examined and photographed with a stereoscopic microscope(x120), and the largest gap along the junction of $Molloplast-B^{(R)}$ and acrylic resin on each specimen was measured. One-way analysis of variance(ANOVA) and independent t-test at 95% confidence level were used to analyze the data and to compare groups. The results of this study were as follows. In comparison with finishing tools, the gap width was the largest in $Molloplast^{(R)}$-Cutter and the smallest in FSQ-cross cut bur. There was statistically significant difference between FSQ-cross cut bur and $Molloplast^{(R)}$-Cutter(p<0.05). There was no significant difference in gap width between the direction of polishing. The mean value of gap width was the smallest in case of no polishing, and the largest in case of polishing with pumice & tin oxide. There was statistically significant difference between pumice and pumice & tin oxide. From the results, it is concluded that the use of $Molloplast^{(R)}$-Cutter in clinic need serious consideration even though it has good cutting ability. Further careful study is needed for finishing and polishing methods for decreasing gap width in junction of two materials.

• Korea journal of population studies
• /
• v.4 no.1
• /
• pp.105-130
• /
• 1981

This study was conducted to compare the characteristics of high performane areas for family planning with that of low performance areas and to find factors which strongly affected contraceptive practice behavior. For the study, eight areas were selected from 274 rural family planning canvassing areas of Korean Population Policy and Program Evaluation Study, which was an action study operated in all areas of Cheju Island from July 1, 1976 until December 31,1979. As a first step of the action study, Cheju Island was devided up 318 family planning canvasser areas Each area was consisted of 200 households in rural district and 300 households in urhan one Duriog the period of project, each canvassing area had been managed by a female family planning canvasser, selected by director of health center considering several individual conditions needed for family planning activities Basic activities of canvassers were to counsell all the eligihie couples in own charged area about family planning methods and also to distribute contraceptives such as condoms and oral pills. In case couples desire to accept sterilization including vasectomy and tubal-ligation, the canvassers played a linking role connecting potential client with family planning field workers. Canvassng areas shows significant differentce in performance for family planning, nevertheless they are supposed to have almost the same conditions regarding family planning distribution channel. Because the purpose of the Cheju project was to eliminate all the problems that existed in governmental distribution system, that is to remove geographic, economic, cognitive and administrative barriers Accumulated performances of family planning methods accepted by residents in each area were calculated by eligible women aged 14-49. And then canvassing areas were ranked according to performance score. Consequently, 4 areas in extremely high and low family planning performance areas were selected respectively. Major results were obtained by comparing characteristics of high performance area with that of low performance areas, which are as follows: 1. The mean number of living children was about the same both in high and low performance areas for family planning. But respondents' mean age (38.5) in high performance areas was higher than that (37.0) in low performance areas 2. Respondents' perception in the expectant educational level of others' children in high performance areas was higher than that in low performance areas, although respondents educational level, monthly expenditure and ratio of children in high school and above was not different. 3. Ratio of ownerships of TV and newspaper in high performance areas was highen than that in low performance areas 4. The duration of canvasser' charge in high performance areas was longer than that of low performance areas, showing the fact that canvassers didn't move cut in high performance areas 5. In high performance areas, canvassers' houses were relatively located in the center part of the village. And so villagers resided in near distances from the anvasser's house 6. 4H clubs' activities in high performance areas were more active than those in low performance areas Therefore it was assumed that cohesiveness of community in high performance areas were stronger than that in low areas. 7. Canvassers' family planning practice rate was higher than that in low performance areas, and also canvassers' human relationship was more sociable than that of canvassers in low performance areas. 8. Fourteen variables which showed relatively high significance level in $X^2$ and F test were selected as independent variables for stepwise regression analysis. According to the results of regression analysis. five of 14 variables-distributors education level ($R^2$=.4439), duration of distributor's charge ($R^2$=.6166), 4H club activities ($R^2$=.6697), canvasser's contraceptive practice ($R^2$=.7377) and location of distributions house ($R^2$=.8010) explained 80.1 percent of total variance.

• Korea journal of population studies
• /
• v.19 no.2
• /
• pp.175-205
• /
• 1996

The purpose of this study was to find the distribution of the variables on the quality of life and the determinants of the sexual attitude and behavior of the unmarried female workers. This study was surveyed to the 306 unmarried women who worked in the small and medium scale industries in Kyungin area and analyzed the respondent's knowledge of sex, sexual behavior, health behavior, health status, satisfaction of working condition and recognition of working environment. The result of this study could be summarized as follows: The respondent's age are mostly early of twenties and their education level are high school and more. They recognize that their health condition is not so good but they hardly try to improve health condition. They think that their working condition are mostly unsatisfied and they also believe that they expose themselves to the toxic working environment. Although their knowledge of sex are low they have few chances for the education of sex and family planning. Their attitude of premarital sex are conservertive but the rate of approval of living together before marriage are high and the rate of premarital sex is around 15 percent. The premarital sex behavior are positively related with family size, living condition, knowledge of sex and working period but the sex experiences are negatively related with working period and knowledge of sex. As a result we suggest that the sex education and consultative program are necessary for improving the quality of life of the unmarried working women in small and medium scale industries.

• Journal of the Korean Geophysical Society
• /
• v.2 no.1
• /
• pp.39-44
• /
• 1999

High-resolution images are drawn from existing seismic data which were originally obtained by Korea Ocean Research & Development Institute (KORDI) during 1994-1997 for deep seismic studies on the East Sea of Korea. These images are analyzed for mapping Quaternary faults and near-bottom gas pockets. First 12 channels are selected from shot gathers for reprocessing. The processing sequence adopted for high-resolution seismic images comprises data copy, trace editing, true amplitude recovery, common-midpoint sorting, initial muting, prestack deconvolution, bandpass filtering, stacking, highpass filtering, poststack deconvolution, f-x migration, and automatic gain control (AGC). Among these processing steps, predictive deconvolution, highpass filtering, and short window AGC are the most significant in enhancement of resolution. More than 200 Quaternanry faults are interpreted on the migrated sections in the shallow depths beneath the seafloor. Although numerous faults are found mostly at the western continental slope and boundaries of the Ulleung Basin, significant amount of the faults are also indicated within the basin. Many of these faults are believed to be formed with reactivation of basement, from geotectonic activities including volcanism, and often originated in Tertiary, indicating that the tectonic regime of the East Sea might be unstable. Existence of shallow gas pockets casts real hazardous warnings to deep-sea drillings and/or to underwater constructions such as inter-island cables and gas pipelines. On the other hand, discovery of these gas pockets heightens the interests in developing natural resources in the East Sea. Reprocessed seismic sections, however, show no typical seismic characteristics for gas hydrates such as bottom-simulating reflectors in the western continental slope and ocean floor.

• Journal of the Korean Vacuum Society
• /
• v.17 no.6
• /
• pp.528-537
• /
• 2008

60 nm and 20 nm thick hydrogenated amorphous silicon(a-Si:H) layers were deposited on 200 nm $SiO_2$/single-Si substrates by inductively coupled plasma chemical vapor deposition(ICP-CVD). Subsequently, 30 nm-Ni layers were deposited by an e-beam evaporator. Finally, 30 nm-Ni/(60 nm and 20 nm) a-Si:H/200 nm-$SiO_2$/single-Si structures were prepared. The prepared samples were annealed by rapid thermal annealing(RTA) from $200^{\circ}C$ to $500^{\circ}C$ in $50^{\circ}C$ increments for 40 sec. A four-point tester, high resolution X-ray diffraction(HRXRD), field emission scanning electron microscopy(FE-SEM), transmission electron microscopy(TEM), and scanning probe microscopy(SPM) were used to examine the sheet resistance, phase transformation, in-plane microstructure, cross-sectional microstructure, and surface roughness, respectively. The nickel silicide from the 60 nm a-Si:H substrate showed low sheet resistance from $400^{\circ}C$ which is compatible for low temperature processing. The nickel silicide from 20 nm a-Si:H substrate showed low resistance from $300^{\circ}C$. Through HRXRD analysis, the phase transformation occurred with silicidation temperature without a-Si:H layer thickness dependence. With the result of FE-SEM and TEM, the nickel silicides from 60 nm a-Si:H substrate showed the microstructure of 60 nm-thick silicide layers with the residual silicon regime, while the ones from 20 nm a-Si:H formed 20 nm-thick uniform silicide layers. In case of SPM, the RMS value of nickel silicide layers increased as the silicidation temperature increased. Especially, the nickel silicide from 20 nm a-Si:H substrate showed the lowest RMS value of 0.75 at $300^{\circ}C$.

• Journal of the Korean Vacuum Society
• /
• v.17 no.4
• /
• pp.359-364
• /
• 2008

We have investigated optical and structural properties of $Al_{0.3}Ga_{0.7}N$/GaN and $Al_{0.3}Ga_{0.7}N/GaN/Al_{0.15}Ga_{0.85}N/GaN$ heterostructures (HSs) grown by metal-organic chemical vapor deposition, by means of Hall measurement, high-resolution X-ray diffraction, and temperature- and excitation power-dependent photoluminescence (PL) spectroscopy. A strong GaN band edge emission and its longitudinal optical phonon replicas were observed for all the samples. At 10 K, a 2DEG-related PL peak located at ${\sim}\;3.445\;eV$ was observed for $Al_{0.3}Ga_{0.7}N$/GaN HS, while two 2DEG peaks at ${\sim}\;3.42$ and ${\sim}\;3.445\;eV$ were observed for $Al_{0.3}Ga_{0.7}N/GaN/Al_{0.15}Ga_{0.85}N/GaN$ HS due to the additional $Al_{0.15}Ga_{0.85}N$ layers. Moreover, the emission intensity of the 2DEG peak was higher in $Al_{0.3}Ga_{0.7}N/GaN/Al_{0.15}Ga_{0.85}N/GaN$ HS than in $Al_{0.3}Ga_{0.7}N$/GaN HS probably due to an effective confinement of the photo-excited holes by the additional $Al_{0.15}Ga_{0.85}N$ layers. The 2DEG-related emission intensity decreased with increasing temperature and disappeared at temperatures above 150 K. To investigate the origin of the new 2DEG peaks, the energy-band structure for multiple AlGaN/GaN HSs were simulated and compared with the experimental data. As a result, the observed high- and low-energy peaks of 2DEG can be attributed to the spatially-separated 2DEG emissions formed at different AlGaN/GaN heterointerfaces.

• Journal of Wetlands Research
• /
• v.7 no.3
• /
• pp.87-95
• /
• 2005

Vegetation structure of the vascular plants was investigated from March 2003 to October 2003 in Haepyeong wetland, Gumi-si, Gyeongsangbuk-do, Korea. Actual vegetation of Haepyeong wetland largely can be classified by floristic composition and physiognomy into 18 communities; Xanthium strumarium-Digitaria sanguinalis, Humulus japonicus, Persicaria perfoliata-Humulus japonicus, Phragmites japonica-Miscanthus sacchariflorus, Persicaria hydropiper-Phragmites communis, Persicaria hydropiper, Phragmites japonica-Persicaria hydropiper, Miscanthus sacchariflorus- Phragmites japonica, Persicaria hydropiper-Phragmites japonica, Miscanthus sacchariflorus-Salix glandulosa, Salix nipponica-Salix glandulosa, Salix nipponica-Salix koreensis, Salix nipponica, Miscanthus sacchariflorus-Salix nipponica, Phalaris arundinacea-Salix nipponica, Salix glandulosa-Salix nipponica, Trapa japonica, and Ceratophyllum demersum-Trapa japonica. Among them, the area of the Salix nipponica-Salix koreensis community was the largest as 122.2ha(9.23%). The dominant vegetation type was Miscanthus sacchariflorus-Persicaria hydropiper community based on phytosociological method, and it was was classified into three subcommunities; Salix glandulosa-Salix nipponica subcommunity, Digitaria sanguinalis subcommunity, and Cyperus amuricus subcommunity. Differential species of Salix glandulosa-Salix nipponica subcommunity were Salix nipponica, S. glandulosa, S. koreensis, Scirpus radicans, Persicaria maackiana, and Achyranthes japonica; differential species of Digitaria sanguinalis subcommunity were D. sanguinalis, Setaria viridis, Ambrosia artemisiifolia var. elatior, and Cyperus orthostachyus; differential species of Xanthium strumarium subcommunity were X. strumarium, Acalypha australis, Erigeron canadensis, Echinochloa crus-galli, and Vicia tetrasperma. Zonation of vascular hydrophytes and hygrophytes was as followers: Salix glandulosa, S. koreensis, S. nipponica were distributed in the region of land which water table is low, and Persicaria maackiana, Persicaria hydropiper, Scirpus radicans were distributed in the understory. And emergent plants such as Phragmites communis and Scirpus karuizawensis, floating-leaved plant such as Trapa japonica, submersed plant such as Ceratophyllum demersum, and free floating plant such as Spirodela polyrhiza formed the zonation from shoreline to water. The specified wild plants designated by the Korean Association for Conservation of Nature, Ministry of Forest, and Ministry of Environment were not distributed in the study area. It was expected that Haepyeong Wetland worthy of conservation contributed purifying water pollution, giving habitats of many lifes, and providing beautiful scenes of the river.

• Journal of Cadastre & Land InformatiX
• /
• v.50 no.1
• /
• pp.107-123
• /
• 2020

With stabilization of the recent multi-GNSS infrastructure, and as multi-GNSS has been proven to be effective in improving the accuracy of the positioning performance in various industrial sectors. In this study, in view that SF(Single frequency) GNSS receivers are widely used due to the low costs, evaluate effectiveness of SF Real Time Point Positioning(SF-RT-PP) based on four multi-GNSS surveying methods with RTCM-SSR correction streams in static and kinematic modes, and also derive response challenges. Results of applying SSR correction streams, CNES presented good results compared to other SSR streams in 2D coordinate. Looking at the results of the SF-RT-PP surveying using SF signals from multi-GNSS, were able to identify the common cause of large deviations in the altitude components, as well as confirm the importance of signal bias correction according to combinations of different types of satellite signals and ionospheric delay compensation algorithm using undifferenced and uncombined observations. In addition, confirmed that the improvement of the infrastructure of Multi-GNSS allows SF-RT-SPP surveying with only one of the four GNSS satellites. In particular, in the case of code-based SF-RT-SPP measurements using SF signals from GPS satellites only, the difference in the application effect between broadcast ephemeris and SSR correction for satellite orbits/clocks was small, but in the case of ionospheric delay compensation, the use of SBAS correction information provided more than twice the accuracy compared to result of the Klobuchar model. With GPS and GLONASS, both the BDS and GALILEO constellations will be fully deployed in the end of 2020, and the greater benefits from the multi-GNSS integration can be expected. Specially, If RT-ionospheric correction services reflecting regional characteristics and SSR correction information reflecting atmospheric characteristics are carried out in real-time, expected that the utilization of SF-RT-PPP survey technology by multi-GNSS and various demands will be created in various industrial sectors.

• Korean Journal of Food Science and Technology
• /
• v.36 no.2
• /
• pp.268-275
• /
• 2004

Effects of soaking time and particle size on physicochemical properties of nonwaxy rice flour were investigated. Nonwaxy rice grains were soaked at $4^{\circ}C$ for 0, 1, 12, and 24 hr, dried at room temperature, and milled, Resulting flours were passed through 45-mesh ($<355{\mu}m,\;IL45$) and 100-mesh ($<150{\mu}m\;IL100$) sieves and separated into $<40{\mu}m\;and\;40-100{\mu}m$ series. IL45 series showed higher amount of large particles ($40-100{\mu}m$) than IL100 series. As the soaking time increased, protein and ash contents decreased, and amylose content, water-binding capacity, swelling power, and solubity of nonwaxy rice flours increased. Swelling power and solibility of nonwaxy rice flours also increased between $65-85^{\circ}C$. Water-binding capacity, swelling power, and solubility of IL100 series were higher than those of IL45 series. 12 hr-soaked nonwaxy rice flour pastes showed higher peak viscosity and breakdown but lower setback and visicosity at $95\;and\;50^{\circ}C$ than 1 hr-soaked ones. X-Ray diffractograms of nonwaxy rice flours were not affected, whereas surface appearance was affected, by soaking time and particle size.