• Journal of the Mineralogical Society of Korea
• /
• v.19 no.4 s.50
• /
• pp.265-275
• /
• 2006

It is in its infancy to use bacteria as a novel biotechnology for leaching precious and heavy metals from raw materials. The objective of this study was to investigate biogeochemical processes of iron leaching from magnetite reduction by iron-reducing bacteria isolated from intertidal flat sediments, southwestern part of Korea. Microbial leaching experiments were performed using commercial magnetite, Aldrich magnetite, in well-defined mediums with and without bacteria. Water soluble Fe production was determined by ICP analysis of bioleached samples in comparison to uninoculated controls, and the resulting precipitated solids were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The extent of iron leaching from magnetite in the aerobic conditions (Fe = 107 ppm) was higher than that in the anaerobic environments (Fe = 94 ppm). In the anaerobic conditions, Fe(III) in commercial magnetite was also reduced to Fe(II), but no secondary mineral phases were observed. Amorphous iron oxides formed in the medium under aerobic conditions where there was sufficient supply of oxygen from the atmosphere. SEM observation suggests that the reduction process involves dissolution-precipitation mechanisms as opposed to solid state conversion of magnetite to amorphous iron oxides. The ability of bacteria to leach soluble iron and precipitate amorphous iron oxides from crystalline magnetite could have significant implications for biogeochemical processes in sediments where Fe(III) in magnetite plays an important role in the largest pool of electron acceptor as well as the tool as a novel biotechnology for leaching precious and heavy metals from raw materials.

• Journal of the Mineralogical Society of Korea
• /
• v.31 no.2
• /
• pp.113-121
• /
• 2018

Baekasan Acheon cave located in Hwasun-gun, Jeollanam-do is a natural limestone cave only found in this province. In this study, the mineralogical and geochemical characteristics of speleothems collected from Baekasan Acheon cave were identified and the capability of carbonate mineral formation by aerobic microorganisms enriched from the cave and the mineralogical and geochemical characteristics of carbonate minerals formed by the microorganisms were investigated. The samples of sediments (clay) and speleothems (shelfstone and cave coral) were collected at three sites in the cave. The samples of shelfstone and cave coral were identified mainly as carbonate mineral, Mg-rich calcite, and clay minerals were composed of quartz, muscovite, and vermiculite by X-ray diffraction (XRD) analysis. To cultivate the carbonate forming microorganisms, parts of the sediment and speleothems were placed in D-1 medium containing urea, respectively, and the growth of microorganisms was observed under the aerobic condition at room temperature. The capability of carbonate mineralization of the cultured Baekasan Acheon cave microorganisms was examined through adding 1% (v/v) of the cultured microorganisms and calcium sources, Ca-acetate or Ca-lactate, into the D-1 medium. XRD analysis showed that the microorganisms cultured in cave deposits formed calcium carbonate ($CaCO_3$) under all conditions, and these microbial carbonate minerals included calcite and vaterite. The morphological characteristics and chemical composition of biologically formed minerals were observed by SEM-EDS showed various crystal forms such as rhomboid, spherical, perforated surface with Ca, C, and O of major chemical components. The existence of such microorganisms in the cave can contribute the formation of carbonate minerals, and it is likely to affect the geochemical cycles of carbon and calcium in the cave.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.4
• /
• pp.117-125
• /
• 2020

This study was conducted to investigate differences in self-efficacy, self-esteem, and vitality related to physical exercise and health consciousness. A descriptive research design, x² test, and t test were used. Data were collected from May 1 to June 30, 2019, at K city. Participants were 220 nursing students of mean age 23.7 years; 187 (85.5%) were women, 99 (45.0%) exercised regularly; 138 (62.7%) were positive about their health Ed. Note: Please confirm that these edits convey your intended meaning. The scores Ed. Note: This is not clear. Here, do you mean "mean scores of all participants"? of self-efficacy of health and body were 2.93±0.35 and 3.16±0.37, respectively; self-esteem, 2.94±0.43; and vitality, 3.78±0.52. There were significant differences in self-efficacy of health (t=3.68, p=<.001), motor function (t=5.39, p<.001), psychological function (t=2.10, p=.037), nutritional function (t=2.50, p=.013), efficacy of health management (t=2.37, p=.019), and vitality (t=12.63, p=<.001) related to physical exercise. Self-efficacy of health (t=3.73, p=<.001), motor function (t=3.29, p=.001), psychological function (t=4.01, p<.001), nutritional function (t=2.62, p=.009), efficacy of health management (t=2.51, p=.013), self-efficacy of body (t=2.59, p=.010), self-esteem (t=3.91, p=<.001), and vitality (t=2.92, p=.004) were related to health consciousness. Physical exercise and previous experience of body weight loss contributed to enhanced self-efficacy of health and vitality and health consciousness contributed to enhanced self-efficacy of health and body, self-esteem, and vitality.

• The Journal of the Korea Contents Association
• /
• v.8 no.11
• /
• pp.210-216
• /
• 2008

In this study, image comparisons were carried out using a MRI contrast medium which was derived by mixing a polyaminocarboxylic ligand and a gadolinium (III) transition metal which is paramagnetic and has good neutron absorbing capabilities with Gd-DTPA which is currently being used widely in the clinical setting. By using a 1.0T (Harmony, SIEMENS) MR equipment, phantoms of which 100cc of saline was diluted with a diethylenetriaminetriacetic acid derivative and Gd-DTPA were imaged. The amount of diethylenetriaminetriacetic acid and Gd-DTPA which was diluted into the 100cc of saline was 0.05mmol/L, 0.1mmol/L, 0.15mmol/L, 0.2mmol/L, 0.3mmol/L, 0.5mmol/L, 1.0mmol/L, 2.0mmol/L, 3.0mmol/L and 4.9mmol/L respectively. Head coils were used and while fixing the SE pulse sequence and image variable (as TE is 14ms, 1NEX with a 256x201 matrix), the signal intensity and simple contrast ratios according to changing concentrations and TR were compared with various TR at 300ms, 400ms, 500ms, 600ms, 700ms, 800ms, 900ms, 1000ms, 1200ms, 1400ms and 1600ms. According to the comparison results of the signal intensity of the image based on changes in contrast medium concentrations and TR, the differences in signal intensity between the two contrast mediums were found to be small at $1.0{\sim}2.0mmol/L$ when the highest signal intensity was achieved. However, at concentrations of 1.0mmol/L or less, the signal intensity was markedly higher in the Diethylenetriaminetriacetic acid derivative than in the Gd-DTPA complex. It was also found that the differences in the signal intensities demonstrated by the concentrations of the contrast mediums were affected by the TR. Accordingly, the efficacy of the Diethylenetriaminetriacetic acid derivative was shown to be better than the Gd-DTPA and also possible to get the optimum image quality by the use of an appropriate TR with appropriate concentrations of contrast medium.

• The Journal of Pediatrics of Korean Medicine
• /
• v.25 no.1
• /
• pp.72-81
• /
• 2011

Backgrounds: Sticking warm and hot herbs to acupoint in Dog-Days where the strongest Yangqi takes place, Acupoint sticking in Dog-Days is one of Oriental medical treatment to cure winter diseases in the summer. This treatment is widespread in China and Taiwan, and is becoming popular in South Korea nowadays. Objectives: The research has been conducted to evaluate the influencial factors and efficacy in Acupoint sticking in Dog-Days. Methods: We visited one kindergarten in Dog-Days of 2010, and attached pills which are made of Sinapis Semen(白芥子), Corydalis Tuber(玄胡索), Asari Herba Cum Radix(細辛), Juice of Zingiber Officinale(薑汁) to BL-13(肺兪), BL-15(心兪), BL-17(膈兪) of 56 children for 4-6 hours(34 boys, 22 girls, $52.64{\pm}16.85$ months, 19-78 months). Exacerbating effect or non-significant changes in respiratory symptoms before and after the treatment were ified.. The influentialfactors of efficacy were analyzed by Pearson's $x^2$-test and Fisher's exact test. In addition, the efficacy and satisfaction among once, twice, and three times treatment groups were verified by ANOVA. Results: 27 children (48.2%) were effective, but efficacy felt by parents is 45 cases (80.4%). Sex, perspiration, stool, urine, sleep, cold of hands and feet, cold sensitivity, and frequency of Acupoint sticking in Dog-Days has no relation to efficacy(p>0.05). However, the efficacy is poor in 1 and 2 age(p=0.030). Difference among efficacy of once, twice, and three times treatment groups is not significant(p=0.069), whereas there are linear association in frequency of Acupoint sticking in Dog-Days and efficacy(p=0.030). 36 parents (64.3%) are satisfied with Acupoint sticking in Dog-Days, and we observed significant difference among once, twice, three times treatment groups(p=0.041). 19 parents (33.9%) had been known about Acupoint sticking in Dog-Days, but 53 parents (94.6%) wanted repetition, and 41 parents (73.2%) intended to recommend it to acquaintance. Side effects are minor itching in two cases. Twenty seven participants showed positive effect, and forty five people (80.4%) felt beneficial. Sex, perspiration, stool, urine, sleep, cold hands and feet, sensitivity in cold, and frequency of Acupoint sticking in Dog-Days has no relation to the efficacy(p>0.05). Though the efficacy was poor in one and two year old infants, it was linearly correlated with the frequency count and responses from the treatment (p=0.030). Thirty six participants (64.3%) satisfied with the treatment, and so did the first, second, and third participant groups (p=0.041). Even though, only nineteen participants (33.9%) were familiar with Acupoint sticking in Dog-Days, fifty three participants (94.6%) preferred to repeat the treatment, and 41 parents were preferable to recommend the treatment to others. Side effects of minor itching has been reported in a couple cases. Conclusions: Acupoint sticking in Dog-Days is effective in children older than three year old. The effect would be greater when going through the treatment three times. Based on significant satisfaction, intention of repetition and recommendation, strong promotion on Dog-Days are needed to make a better use of Acupoint sticking in Dog-Days for the effective treatment.

• Clinical and Experimental Pediatrics
• /
• v.45 no.11
• /
• pp.1389-1396
• /
• 2002

Purpose : This study was done to analyze the changes in the clinical conditions and the diagnosis of hypertrophic pyloric stenosis. Methods : We report a retrospective clinical analysis of 39 patients with hypertrophic pyloric stenosis from Jan. 1992 to Aug. 2001. The age and sex distribution, family and birth history, clinical symptoms, the ultrasonographic and the operative sizes of pyloric canals were compared. Results : The body weight was below the 3 percentile at admission in eight cases(20.5%). "Olive like mass" in right upper quadrant was palpated during physical examination in 23 cases(59%) and gastric peristaltic wave observed in six cases(15%). The ultrasonographic measurements showed that the pyloric muscle thickness to be $4.95{\pm}0.99mm$($mean{\pm}SD$), pyloric diameter $14.42{\pm}2.64mm$, and pyloric length $20.17{\pm}3.92mm$. Fredet-Ramstedt pyloromyotomy was employed in all cases. The operative measurements of the pyloric muscle thickness was $5.11{\pm}1.01mm$, pyloric diameter $15.01{\pm}2.47mm$, and pyloric length $22.32{\pm}3.43mm$. Conclusion : There was no significant difference between the ultrasonographic and operative measurements. Currently, the hypertrophic pyloric stenosis patients showed lesser clinical hallmarks of the disease. The earlier diagnosis using imaging studies before development of significant metabolic abnormalities is becoming an important factor that change the future outcomes of hypertrophic pyloric stenosis.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.3
• /
• pp.350-355
• /
• 2003

This study was carried out to clarify the effect of addition of perilla leaf powder (PLP) and carcass grade on the quality and palatability of pork sausage. The chemical composition, pH, calorie, water holding capacity, surface color, textural properties and amino acid composition of the samples were determined, and sensory characteristics were evaluated. Moisture and crude ash were not different among sausage of four type. Crude fat of grade B sausage was higher than that of grade E sausage, and grade B sausage added PLP was higher than grade B sausage without PLP. Crude Protein of grade E sausage was higher than that of grade B sausage. The pH of grade E sausage added PLP was highest, and calorie of grade B sausage without PLP was highest among sausage of four type. Water holding capacity of grade B added and free PLP was significantly higher than grade I sausage. The residual nitrite of sausage added PLP was significantly lower than sausage without PLP. In case of Hunter's $L^{*}$, grade B sausage and free PLP sausage were significantly higher than grade E sausage and sausage added PLP, respectively. In case of Hunter' $a^{*}$, grade E sausage and free PLP sausage were significantly higher than grade B sausage and sausage added PLP. Hunter's $b^{*}$ of sausage added PLP was higher than that of free PLP sausage. Textural properties, hardness, springiness, cohesiveness and chewiness were significantly different among sausage of four type, but gumminess of grade E added PLP was lowest among sausage of four type. Total amino acid was not significantly different among sausage of four type. Sensory color and texture of grade B sausage were superior to grade I sausage, palatability of free PLP sausage was superior.sage was superior.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.5
• /
• pp.643-650
• /
• 2007

It has been known that Samultang has positive effects on blood circulation and erythrocyte formation. Samultang was composed of four ingredients, Angelica gigas Nikai, Rahmanniae Radix Preparata, Paeonia lactiflora Pallas, and Cnidium officinale Makino. Five types of bread were prepared by replacing water with Samultang for dough proportionally. Control (C) did not have Samultang and the other four experimental bread contained Samultang: S-I (25% of water was substituted by Samultang), S-II (50% substituted), S-III (75% substituted), and S-IV (100% substituted). Moisture, protein, and ash contents of Samultang were $97.34{\pm}0.11%,\;0.42{\pm}0.04%,\;and\;1.40{\pm}0.16%$, respectively. Replacing water with Samultang decreased pH and increased significantly wet gluten content of the dough. Substitution of Samultang for water incremented redness and yellowness of the dough and bread and increased hardness. It also raised the contents of ash and protein. Although it was not significant, in addition, moisture loss of the bread during storage seemed to be lessened by replacing water with Samultang. However, total volume and specific loaf volume of the bread, baking loss rate, and the other textural characteristics except hardness were not affected by substituting water with Samultang. Due to the above results, sensory evaluation of volume and gumminess of the bread were improved significantly by substituting Samultang for water. The bread replaced 25% of the water with Samultang was ranked as the best by the test of sensory evaluation. These results imply that adding Samultang instead of water to dough for bread might bring positive effects on quality characteristics of the bread without any adverse influences. Therefore, it might be worth developing functional bread using Samultang.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2000.04a
• /
• pp.9-10
• /
• 2000

An important business-field of world-wide steel-industry is the coating of thin metal-sheets with zinc, zinc-aluminum and aluminum based materials. These products mostly go into automotive industry. in particular for the car-body. into building and construction industry as well as household appliances. Due to mass-production, the processing is done in large continuously operating plants where the mostly cold-rolled metal-strip as the substrate is handled in coils up to 40 tons unwind before and rolled up again after passing the processing plant which includes cleaning, annealing, hot-dip galvanizing / aluminizing and chemical treatment. In the liquid Zn, Zn-AI, AI-Zn and AI-Si bathes a combined action of corrosion and wear under high temperature and high stress onto the transfer components (rolls) accounts for major economic losses. Most critical here are the bearing systems of these rolls operating in the liquid system. Rolls in liquid system can not be avoided as they are needed to transfer the steel-strip into and out of the crucible. Since several years, ceramic roller bearings are tested here [1.2], however, in particular due to uncontrollable Slag-impurities within the hot bath [3], slide bearings are still expected to be of a higher potential [4]. The today's state of the art is the application of slide bearings based on Stellite\ulcorneragainst Stellite which is in general a 50-60 wt% Co-matrix with incorporated Cr- and W-carbides and other composites. Indeed Stellite is used as the bearing-material as of it's chemical properties (does not go into solution), the physical properties in particular with poor lubricating properties are not satisfying at all. To increase the Sliding behavior in the bearing system, about 0.15-0.2 wt% of lead has been added into the hot-bath in the past. Due to environmental regulations. this had to be reduced dramatically_ This together with the heavily increasing production rates expressed by increased velocity of the substrate-steel-band up to 200 m/min and increased tractate power up to 10 tons in modern plants. leads to life times of the bearings of a few up to several days only. To improve this situation. the Mechanical Alloying (MA) TeChnique [5.6.7.8] is used to prOduce advanced Stellite-based bearing materials. A lubricating phase is introduced into Stellite-powder-material by MA, the composite-powder-particles are coated by High Energy Milling (HEM) in order to produce bearing-bushes of approximately 12 kg by Sintering, Liquid Phase Sintering (LPS) and Hot Isostatic Pressing (HIP). The chemical and physical behavior of samples as well as the bearing systems in the hot galvanizing / aluminizing plant are discussed. DependenCies like lubricant material and composite, LPS-binder and composite, particle shape and PM-route with respect to achievable density. (temperature--) shock-reSistibility and corrosive-wear behavior will be described. The materials are characterized by particle size analysis (laser diffraction), scanning electron microscopy and X-ray diffraction. corrosive-wear behavior is determined using a special cylinder-in-bush apparatus (CIBA) as well as field-test in real production condition. Part I of this work describes the initial testing phase where different sample materials are produced, characterized, consolidated and tested in the CIBA under a common AI-Zn-system. The results are discussed and the material-system for the large components to be produced for the field test in real production condition is decided. Outlook: Part II of this work will describe the field test in a hot-dip-galvanizing/aluminizing plant of the mechanically alloyed bearing bushes under aluminum-rich liquid metal. Alter testing, the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed. Part III of this project will describe a second initial testing phase where the won results of part 1+11 will be transferred to the AI-Si system. Part IV of this project will describe the field test in a hot-dip-aluminizing plant of the mechanically alloyed bearing bushes under aluminum liquid metal. After testing. the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed.

• Journal of the Korean Applied Science and Technology
• /
• v.20 no.1
• /
• pp.33-43
• /
• 2003

$LiMn_2O_4$ catalyst for $CO_2$ decomposition was synthesized by oxidation method for 30 min at 600$^{\circ}C$ in an electric furnace under air condition using manganese(II) nitrate $(Mn(NO_3)_2{\cdot}6H_2O)$, Lithium nitrate ($LiNO_3$) and Urea $(CO(NH_2)_2)$. The synthesized catalyst was reduced by $H_2$ at various temperatures for 3 hr. The reduction degree of the reduced catalysts were measured using the TGA. And then $CO_2$ decomposition rate was measured using the reduced catalysts. Phase-transitions of the catalysts were observed after $CO_2$ decomposition reaction at an optimal decomposition temperature. As the result of X-ray powder diffraction analysis, the synthesized catalyst was confirmed that the catalyst has the spinel structure, and also confirmed that when it was reduced by $H_2$, the phase of $LiMn_2O_4$ catalyst was transformed into $Li_2MnO_3$ and $Li_{1-2{\delta}}Mn_{2-{\delta}}O_{4-3{\delta}-{\delta}'}$ of tetragonal spinel phase. After $CO_2$ decomposition reaction, it was confirmed that the peak of $LiMn_2O_4$ of spinel phase. The optimal reduction temperature of the catalyst with $H_2$ was confirmed to be 450$^{\circ}C$(maximum weight-increasing ratio 9.47%) in the case of $LiMn_2O_4$ through the TGA analysis. Decomposition rate(%) using the $LiMn_2O_4$ catalyst showed the 67%. The crystal structure of the synthesized $LiMn_2O_4$ observed with a scanning electron microscope(SEM) shows cubic form. After reduction, $LiMn_2O_4$ catalyst became condensed each other to form interface. It was confirmed that after $CO_2$ decomposition, crystal structure of $LiMn_2O_4$ catalyst showed that its particle grew up more than that of reduction. Phase-transition by reduction and $CO_2$ decomposition ; $Li_2MnO_3$ and $Li_{1-2{\delta}}Mn_{2-{\delta}}O_{4-3{\delta}-{\delta}'}$ of tetragonal spinel phase at the first time of $CO_2$ decomposition appear like the same as the above contents. Phase-transition at $2{\sim}5$ time ; $Li_2MnO_3$ and $Li_{1-2{\delta}}Mn_{2-{\delta}}O_{4-3{\delta}-{\delta}'}$ of tetragonal spinel phase by reduction and $LiMn_2O_4$ of spinel phase after $CO_2$ decomposition appear like the same as the first time case. The result of the TGA analysis by catalyst reduction ; The first time, weight of reduced catalyst increased by 9.47%, for 2${\sim}$5 times, weight of reduced catalyst increased by average 2.3% But, in any time, there is little difference in the decomposition ratio of $CO_2$. That is to say, at the first time, it showed 67% in $CO_2$ decomposition rate and after 5 times reaction of $CO_2$ decomposition, it showed 67% nearly the same as the first time.