• 제목/요약/키워드: Wrinkle Analysis

검색결과 155건 처리시간 0.021초

주름이 있는 삼각형 태양돛의 동적해석 (Dynamic Response of Triangular Solar Sail with Wrinkles)

  • 배홍수;우경식
    • 한국항공우주학회지
    • /
    • 제43권3호
    • /
    • pp.195-203
    • /
    • 2015
  • 본 논문에서는 유한요소해석을 통하여 삼각형 태양돛에 대하여 동적거동을 연구하였다. 동적해석은 삼각형 태양돛 멤브레인에 인장하중이 가해졌을 때 발생되는 주름해석을 수행한 후, 이 상태에서 인장하중을 고정하고 모달해석을 수행하였다. 해석에서 주름 알고리즘을 채용한 멤브레인 요소법과 쉘 요소법의 두 가지 방법을 사용하였으며, 그 결과들을 수방법론적 관점에서 비교분석하였다. 주름을 고려하지 않은 경우에 대해서도 해석을 수행하여 동적특성 결과를 주름을 고려한 경우와 비교하였으며, 케이블 각도에 따른 영향에 대하여 체계적으로 조사하였다.

850 nm 파장대 근적외선과 갈바닉 전류기반의 눈가 주름 치료기 개발 및 영상 분석을 통한 치료성능 검증 (Design of 850 nm Near Infrared and Galvanic Current Based Eyeglass-Type Device for Periorbital Wrinkle Treatment and Verification of Treatment Performance through Image Analysis)

  • 안성수;권기진
    • 한국멀티미디어학회논문지
    • /
    • 제21권12호
    • /
    • pp.1379-1386
    • /
    • 2018
  • In this paper, we proposed eyeglass type periorbital wrinkle treatment device for reducing and improving periorbital wrinkles using near infrared LED of 850nm wavelength and galvanic current. The proposed periorbital wrinkle treatment device is equipped with a control system based on F-PCB. It consists of eight near-infrared LEDs and four indicator LEDs for treatment of right and left periorbital wrinkles. The eyeglass frame is coated with conductive material, so galvanic current can flow to the skin of periorbital wrinkle contacted to it. One male adult in the mid-40s was allowed to use the device for 10 minutes every day for 4 weeks. After 4 weeks, image analysis using optical equipment for measuring wrinkles indicated that wrinkle indexes were reduced.

두시 추출물을 함유한 한방화장품의 주름개선 효과에 대한 예비 임상연구 (Pilot Study on Anti-wrinkle Effect of Herbal Cosmetic Containing the Extracts of Douchi (fermented Glycine max Merr.))

  • 김희연;차호열;하기태;최준용;천진홍;김기봉
    • 동의생리병리학회지
    • /
    • 제31권6호
    • /
    • pp.380-384
    • /
    • 2017
  • From March 1, 2017 to May 31, 2017, subjects were allowed to apply a wrinkle-improving herbal cosmetic product containing the extract of Douchi for 8 weeks. The effectiveness of herbal cosmetics was evaluated through wrinkle improvement efficacy parameter analysis, subjective wrinkle improvement through questionnaires, and adverse reaction. The herbal cosmetic products containing the extract of Douchi showed a significant decrease in the wrinkle improvement efficacy parameter analysis result. The results of the subjective satisfaction analysis after use were also evaluated positively. We could confirm the possibility of wrinkle improvement effect of Douchi extract, and it will be possible to contribute to the expansion of korean medicine field through more studies in the future.

얇은 막재료의 주름해석 기법 (Analysis Methods of Wrinkle Prediction for Thin Membrane)

  • 배홍수;우경식
    • 한국항공우주학회지
    • /
    • 제41권11호
    • /
    • pp.865-873
    • /
    • 2013
  • 본 논문에서는 유한요소해석에 의한 막재료의 주름 해석 기법에 관하여 연구하였다. 삼각형 세일 형상에 대해 멤브레인 요소와 쉘 요소를 사용하여 주름해석을 수행하였다. 멤브레인 요소를 이용한 기법에서는 주름을 벌칙매개변수에 의한 물성치를 수정하는 알고리즘을 상용프로그램 내 사용자 서브루틴을 통하여 구현하였다. 쉘 요소에 의한 기하학적 비선형 후좌굴 기법에서는 면외방향의 좌굴을 발생시키기 위하여 모델의 메쉬에 작은 크기의 기하학적 결함을 심는 방법을 사용하였다. 쉘 방법에서는 내연 및 외연해석 기법을 고려하였다. 요소수의 증가에 따른 수렴성과 결과의 정확도의 관점에서 멤브레인 요소법과 쉘 요소법의 효율성을 비교하였다.

공형압연에서 소재 주름흠 발생 해석 - 유한요소해석 (Analysis of wrinkle Initiation on Workpiece in Groove Rolling - Finite Element Analysis)

  • 나두현;조오영;이종호;이용희;이영석
    • 한국소성가공학회:학술대회논문집
    • /
    • 한국소성가공학회 2008년도 춘계학술대회 논문집
    • /
    • pp.415-418
    • /
    • 2008
  • We propose a criterion which predicts wrinkle initiation on workpiece in groove rolling process based on finite element analysis. Fundamental idea introduced in the criterion is to examine the difference between flat rolling which don't' cause wrinkling at all and groove rolling which usually accompanies it. The proposed criterion assumes that irregular distribution of shear strain on workpiece during groove rolling is attributable to the initiation of wrinkling. The proposed criterion has been applied to roughing train in the rod and bar mill of SEAH BESTEEL Inc. A new design for 2nd pass (square roll groove) was suggested, machined and applied. Results reveal that the proposed criterion in this study could point out the location of wrinkle initiation during groove rolling and could reduce onset of wrinkle on final products.

  • PDF

Efficacy Evaluation of Anti-wrinkle Products in Japan

  • Masaki Hitoshi
    • 대한화장품학회지
    • /
    • 제29권2호
    • /
    • pp.67-77
    • /
    • 2003
  • Two categories of cosmetic products, cosmetics and quasi-drugs, have been established by the Ministry of Health, Labor and Welfare (MHLW) in Japan. Japanese pharmaceutical law has defined that products categorized as cosmetics do not exhibit any effects on human skin. In fact, cosmetic products are not permitted to claim any efficacy. On the other hand, products in the quasi-drug category can claim several efficacies such as anti-inflammatory effects, whitening/lightning effects, hair growth effects and so on. Unfortunately, the Japanese MHLW has not yet approved the efficacy of anti-aging/anti-wrinkle effects as a claim point. However, the population is aging, and the demand for anti-aging/anti-wrinkle products is increasing year by year. Japanese cosmetic companies have proposed to the MHLW that anti-aging/anti-wrinkle agents be approved as a claim concept of a quasi-drug. However, unified evaluation methods for anti-aging/anti-wrinkle effects have not been established. Currently, each company evaluates the efficacy of products/materials using their own original methods. Thus, to request approval of the MHLW, the establishment of a unified evaluation method is needed. Consequently, the Japan Cosmetic Industry Association (JCIA) has established a task force to develop guidelines for evaluating anti-wrinkle effects in 1998. In conclusion, the JCIA would like to adopt visual and image analysis scales to evaluate the anti-wrinkle effects objectively. Generally, wrinkles are roughly classified into three groups as fine wrinkles, linear deep wrinkles and crow's feet. However, academic societies of dermatology or cosmetics have not yet established a definition of wrinkles in Japan. Thus, in advance of setting up an evaluation method, the definition of wrinkles f3r evaluation must be decided. Wrinkles are defined by the task force of the JCIA as follows; furrows that people can recognize visually and that appear on the forehead, the corners of the eyes and the backs of the neck with aging. In addition, furrows are emphasized by exposure to solar light and by dry conditions. Visual evaluation is the most sensitive method and can be applied to most types of wrinkles. However, visual evaluation is hard to express digitally as results. Besides, in the case of image analysis, comparisons of data obtained from distinct examinations can not be done, because data from image analysis are relative values. Thus, to enhance the reliability of the evaluations, the adoption of an objective scale was required. The principle of the evaluation method is to analyze images taken from silicone replicas of wrinkle areas using several parameters, such as the proportion of the wrinkle $area({\%})$, the mean depth of the wrinkles (mm), the mean depth of the deepest wrinkle (m) and the deepest point on the deepest wrinkle. Lights are shown on the skin replica from an orthogonal direction of the main orientation of the wrinkle, and the resulting shadow images are quantified by the image analysis method. To increase the precision of the data or to allow comparisons of independent examinations, a scale with furrows of several depths, 200, 400, 600, 800, and $1000{\mu}m$, is adapted in the evaluation system. I will explain the guidelines established by the JCIA in the presentation.

가변편광과 광학배율을 기반으로 한 피부 확대경을 이용한 피부주름 측정 (Skin Wrinkle Detection Using Dermatologic Magnifier Based on Variable Polarization and Optical Magnification)

  • 배영우;정병조
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2006년 학술대회 논문집 정보 및 제어부문
    • /
    • pp.190-192
    • /
    • 2006
  • The clinical characteristics of photodamaged skin, such as coarse and fine wrinkle are not accurately evaluable with previous methods. Public awareness for wrinkle treatment and prevention which rely on proper assessment and evaluation of the underlying skin changes has been increased as the population ages. In this paper, we suggest an in-vivo method and instrument that allow us to acquire a wrinkle-enhanced image to improve the accuracy of quantitative and qualitative analysis for skin wrinkle. The method used involved white LED illumination and photography through polarizing filters. Finally, the polarized light photography yields an accurate and evaluable parameter of photodamaged skin, especially fine and coarse wrinkle.

  • PDF

선재공형이 주름흠에 미치는 영향 (The influence of roll caliber design on the wire rod's Wrinkle defect)

  • 김준영;조용근;김용호;임규환;이영석
    • 한국소성가공학회:학술대회논문집
    • /
    • 한국소성가공학회 1999년도 제3회 압연심포지엄 논문집 압연기술의 미래개척 (Exploitation of Future Rolling Technologies)
    • /
    • pp.180-187
    • /
    • 1999
  • This document illustrates the relationship between the wire rod wrinkle defect and the roll caliber design. The wrinkle defect is caused by the incongruent rolling conditions of the roll caliber design, the roll adjustment, and the extracting temperature. In this document, we restrict the study scope to the roll caliber design's effect on wrinkle defect at the base of real condition of the No.2 Wire Rod mill, POSCO. There has been wrinkle defect problem in the No.2 Wire Rod Mill, POSCO for many years. The engineers of the wire rod mill have been making efforts to solve the problem. As one of the efforts, we take the samples of the wire rod in the each stands of the 2'nd wire rod mill and then analyze the samples. Through the analysis, we find out the problem of the roll caliber design. So, we suggest the roll caliber design method to be more effective to weaken the wrinkle defect.

  • PDF

공형압연에서 소재 주름흠 발생 감소를 위한 유한요소해석 (Finite Element Analysis to Reduce the Wrinkle Initiation of Workpiece in Groove Rolling)

  • 나두현;조오영;이종호;이용희;이영석
    • 소성∙가공
    • /
    • 제17권5호
    • /
    • pp.328-336
    • /
    • 2008
  • A criterion which predicts wrinkle initiation on workpiece in groove rolling process based on finite element analysis is proposed. Fundamental idea considered in the criterion is using the difference between flat rolling which don't cause wrinkling at all and groove rolling which usually accompanies it. The proposed criterion assumes that irregular distribution of shear strain on workpiece during groove rolling is attributable to the initiation of wrinkling. The proposed criterion has been applied to roughing train in the rod mill of SEAH BESTEEL Inc. A new design of 2nd pass (square roll groove) was suggested, machined and applied. Results reveal that the proposed criterion could point out the location of wrinkle initiation and could reduce onset of wrinkle.

Styrene-Butadiene-Styrene Block Copolymer 위 이온빔 조사를 이용한 주름 구조 생성 메커니즘 연구 (Mechanism of Wrinkle Formation on Styrene-Butadiene-Styrene Block Copolymer via Ion-Beam Irradiation)

  • 이주환;김대현
    • 한국전기전자재료학회논문지
    • /
    • 제34권2호
    • /
    • pp.130-135
    • /
    • 2021
  • Wrinkle patterns were fabricated on styrene-butadiene-styrene (SBS) block copolymer substrates using ion-beam (IB) irradiation with various intensities. The wavelength of the wrinkle pattern increased as the IB intensity was increased from 800 to 1,600 eV. IB irradiation-induced changes in the surface properties that were confirmed via physicochemical surface analyses. X-ray photoelectron spectroscopy analysis revealed chemical surface reformation due to the IB irradiation, resulting in C-O/C=O bonds after IB irradiation that were not reported before. These results indicate that the surface chemical modification caused by IB irradiation is strongly related to the surface modulus, which is important when fabricating wrinkle patterns. Furthermore, a strong IB irradiation induced a strong compressive strain; thus the size of the wrinkle pattern was increased.