• Fibers and Polymers
• /
• 제6권2호
• /
• pp.156-161
• /
• 2005

The gray line-profile method is introduced to find fabric density. Some patterned fabrics like stripe design as well as solid fabrics of basic weave structures are used to verify the efficiency and accuracy of the method. The approach is compared with Fourier transform method. Although the gray line-profile method is concise, it shows good results in both solid and patterned fabrics. In addition, it does not require a pre-processing or filtering technique in space or frequency domain to enhance the image suitable for the analysis. However, the approach is slightly influenced by the filter size for finding the local minimums of profile graph.

• Advanced Composite Materials
• /
• 제17권2호
• /
• pp.111-124
• /
• 2008

The effect of temperature on natural frequency and damping is investigated in two different composite materials, Kevlar 29 fiber woven and polyethylene cloth, used especially to design ballistic armor. A damping monitoring method is used experimentally to measure the frequency response curve and it is also modeled numerically using a finite element program. The natural frequencies of a material, or a system, are a function of its elastic properties, dimensions and mass. This concept is used to calculate theoretical vibration modes of the composites. The damping properties in terms of the damping factor are determined by the half-power bandwidth technique. Numerically analyzed and experimentally measured time response curves are compared. It is seen that polymer matrix composites have temperature dependent mechanical properties. This relationship is functional and they have different effects against temperature.

• Geomechanics and Engineering
• /
• 제5권4호
• /
• pp.331-342
• /
• 2013

The major factors that control the performance of reinforced soil structures is the interaction between the soil and the reinforcement. Thus it is necessary to obtain the accurate bond parameters to be used in the design of these structures. To evaluate the behavior of flyash + clay soil reinforced with a woven geotextile, 36 Unconsolidated-Undrained (UU) and 12 reinforced Consolidated-Undrainrained (CU) triaxial compression tests were conducted. The moisture content of soil during remolding, confining pressures and arrangement of geotextile layers were all varied so that the behavior of the sample could be examined. The stress strain patterns, drainage, modulus of deformation, effect of confinement pressures, effects of moisture content have been evaluated. The impact of moisture content in flyash + clay backfills on critical shear parameters was also studied to recommend placement moisture for compaction to MDD. The results indicate that geotextile reinforced flyash + clay backfill might be a viable alternative in reinforced soil structures if good-quality granular backfill material is not readily available.

• Steel and Composite Structures
• /
• 제18권3호
• /
• pp.775-791
• /
• 2015

An analytical and experimental investigation is performed into the mechanical behavior of carbon-fiber/epoxy woven coned annular disk springs. An analytical approach is presented for predicting the deformation behavior of disk springs of specially orthotropic laminates with arbitrary geometric parameters. In addition, an analytical methodology is proposed for obtaining the deformation behavior of a stack of disk springs. The methodology is capable of accounting for parallel and series arrangements for uniform and irregular stacks. Element and assembly experimental results are used to validate the proposed method showing how to achieve flexible spring rates at various deflections ranges. This manuscript also provides guidelines for design and validation of disk spring assemblies.

• International Journal of Costume and Fashion
• /
• 제18권2호
• /
• pp.29-43
• /
• 2018

Service-learning is a form of experiential education in which students participate in organized activities and develop a sense of civic responsibility while acquiring content knowledge of the discipline. The purpose of this study was first, to examine the underlying theories and principles of service-learning, and second, to present a case of systemic implementation of problem-based service-learning into a Product Innovation and Management class in higher education. The New Product Development for an E-Commerce Small Business project was developed for a community partner, BevShots, reflecting the needs of the firm, and was tightly woven into the course content. Students' participation in the project had a significant effect on increasing their awareness of the needs in the community and identifying their roles as citizens as well as enhancing their content knowledge learning. The community partner also received benefits for his business by participating in the project. Through this study, we aim to inspire fashion design and merchandising educators to implement service-learning projects/classes in the curriculum.

• Journal of Information Processing Systems
• /
• 제15권6호
• /
• pp.1277-1295
• /
• 2019

With its technical development, digital printing is being universally introduced to the mass production of clothing factories. At the same time, many fashion platforms have been made for customers' participation using digital printing, and a tool is provided in platforms for customers to make designs. However, there is no sufficient solution in the production stage for automatically converting a customer's design into a file before printing other than designating a square area for the pattern designed by the customer. That is, if 30 different designs come in from customers for one shirt, designers have to do the work of reproducing the design on the clothing pattern in the same location and in the same angle, and this work requires a great deal of manpower. Therefore, it is necessary to develop a technology which can let the customer make the design and, at the same time, reflect it in the clothing pattern. This is defined in relation to the existing clothing pattern with digital printing. This study yields a clothing pattern for digital printing which reflects a customer's design in real time by matching the diagram area where a customer designs on a given clothing model and the area where a standard pattern reflects the customer's actual design information. Designers can substitute the complex mapping operation of programmers with a simple area-matching operation. As there is no limit to clothing designs, the variousfashion design creations of designers and the diverse customizing demands of customers can be satisfied at low cost with high efficiency. This is not restricted to T-shirts or eco-bags but can be applied to all woven wear, including men's, women's, and children's clothing, except knitwear.

• 패션비즈니스
• /
• 제23권1호
• /
• pp.145-162
• /
• 2019

This study reviewed photos of women's jackets shown at Milano Collections from 2013 S/S to 2017 F/W to identify the variations and trends in their structural components and design elements with respect to year and season. 576 photos, which consist of 276 S/S jackets and 300 F/W jackets by renowned Italian luxury fashion brands; Giorgio Armani, Gucci, Fendi, Max Mara and Jil Sander, were analyzed. Some of the highlighted findings are as follows; in the structural aspects, the H-line silhouette, below waist to hip line length, natural shoulder line and single button closure were the most frequently appearing components among all the jackets. For the design elements, the largest number of jackets was made of woven fabric in single color, while fur was mostly used in F/W seasons for its warmth, heaviness and bulky appearance. From the results, it was established that variations were made to the jacket components and design elements to the extent that they convey predominant jacket styles with a certain level of practicality and performance. However, the study also found that some of the jackets demonstrated design diversity and innovation by adopting daring styles, bold materials and colors. As the findings of this study identified the variations and trends in women's jacket components in recent years, they can be applied towards developing high end women's jackets to meet the demands and distinctive needs of luxury clothing buyers and distributors.

• 한국의류산업학회지
• /
• 제3권5호
• /
• pp.486-491
• /
• 2001

The purpose of this study was to examine the effects of chemical finishes on performance characteristics of microfiber blend fabrics. A 60% polyester microfiber/40% cotton blend woven fabric was finished by ten chemicals: three silicone softeners, one fluorochemical, and their mixtures. Performance characteristics examined were abrasion resistance, and oil/water repellency. Chemical finishes containing dimethylpolysiloxane silicone performed better in fabric abrasion resistance than other chemicals. The correlation between abrasion wear and instrumental measures of fabric hand indicated that the breaking strength loss by abrasion related negatively to the coefficient of friction. This implied that the finished fabrics with lower surface frictional coefficient (slipperier) had higher breaking strength loss by abrasion. The microfiber structure of polyester did not appear to help in oil/water repellency due to the larger surface areas of the microfibers. The fluorochemical finished fabric had the most significant improvement on oil/water repellency. The silicone-only finishes, however, did not improve oil/water repellency. When mixed with the fluorochemical, silicone finishes showed improved oil/water repellency.

• 복식
• /
• 제55권8호
• /
• pp.127-143
• /
• 2005

This study provides a classifying framework in the modern knit wears, helps to have better understandings of the comparative differences between hand-knit skill and machine-knit skill in terms of the intrinsically characteristic values, and grasps the tendency in their applied techniques based on the characteristics. The comparative characteristics in modern knit wears are produced according to the used skills. The work completeness with which the clothing can be sublimated into the level of artistic phase is given in craftmanship-knit techniques. This makes it possible to design a rare one, and therefore provides a wider range of availability in clothing. The technical traits in craftman-ship-knit are identified as disassembly, specialty, decorativeness and rarity, and the different skills are employed by the characteristics. On the other hand, the differences are not used in ma-chine-knit wears in the way the craftmanship-knit type utilizes by the trait and, instead, the ma-chine-woven fabrics with a machine tool are taken on the whole. In the flow of fashion modes, the characteristics of machine-knitted wears are found remarkably in the modernized contemporary designs seeking for activity and functionality with the use of materials, colors and details minimized. And those trails are characterized as formality, simplicity, functionality and popularity. The comparison in knitting techniques is made in such a way of disassembly and formality; specialty and simplicity; decorativeness and functionality; and rarity and popularity.

• 한국의류학회지
• /
• 제44권3호
• /
• pp.427-440
• /
• 2020

This study developed a vest prototype capable of monitoring body temperature using textile electrodes to prevent the sudden death of babies as well as to determine the quality of developed products by evaluating usability with commercial products. Based on the results of the 7th Size Korea Project, a basic pattern for a vest prototype was drafted by applying the average size of two-year-old Korean babies. Two prototypes were the detachable (VEST I) and integrated textile electrodes vest type (VEST II), which followed the same design. The materials were 100% cotton single jersey (SJ) and double jersey (DJ). Six experts evaluated the usability of the developed vests (VEST I & VEST II) and commercial product (VEST M). The single-layer woven textile electrode appeared to have a slightly higher conductivity than the double-layer one. There was no statistical difference in the body temperature sensing function between VEST I and VEST II. Finally, the superiority of the VEST I was verified through a comparison with commercial products (VEST M). The usability test suggested that a wearable smart clothing system of the integrated conductive textile could be further commercialized for bio-monitor applications in Ubiquitous-health care.