• 제목/요약/키워드: Woven fabric

Search Result 501, Processing Time 0.024 seconds

The Restoration Effect of Deltacon Method in Coastal Erosion (Deltacon공법을 통한 해안 침식지의 복구 효과 연구)

  • Han, Bong-Ho;Park, Seok-Cheol;Lee, Poong
    • Journal of the Korean Society of Environmental Restoration Technology
    • /
    • v.20 no.6
    • /
    • pp.35-50
    • /
    • 2017
  • This study is to see the recovery effect of the Deltacon method by investigating the amount of sand deposition, the topographical cross section and the vegetation structure; and to derive the effective recovery method of coastal erosion area. The target areas of this study include Jinri coastal dune, Bajireum coastal dune and Seopori coastal dune in Deokjeok-do Island, Ongjin-gun, Incheon. In order to assess the current status of the coastal erosion area recovery, the soil profile structure map was prepared on the site and then the amount of sand deposition within 1m was calculated indoors. The vegetation recovery status of the costal erosion area was assessed via the analyses of the topographical profile structure and the plant community structure, and we aim to derive the effective recovery plan of the Deltacon method with the results. With the Deltacon method, structures with ductile material, special non-woven fabric bags filled with soil and vegetation can be performed therefore the structuralstability and prevention of sand erosion can be achieved. The amounts of sand deposition of Bajireum coastal dune, Seopori costal dune and Jinri costal dune were calculated $0.98{\sim}2.54m^3$, $1.02{\sim}2.96m^3$, and $0.27{\sim}0.75m^3$, respectively, and it is considered that the costal erosion recovery is actively performed for Bajireum costal dune and Seopori costal dune. The analysis results of vegetation structures by topography show that the installation of the send collecting net in steep areas has been highly effective and the Deltacon-constructed target areas have been restored to vegetation and the costal dune, which is similar to the natural dune. The investigation of the plant community structure in Deokjeok-do Island costal dune, Incheon displayed similar research results of the existing costal dune flora and confirmed the emergence of Lathyrus japonicus, Carex kobomugi, Elymus mollis, Vitex rotundifolia, and Calystegia soldanella and others. In order to carry out further effective recovery with the Deltacon method, improvements to rootage of herbaceous vegetation are needed in areas without foredune herbaceous vegetation, and continuos maintenance & management monitoring of connected windbreak forest to costal dunes are also necessary.

A Study on the Merchandising Conditions for Local Infants' Wear Brands (국내(國內) 유아복(幼兒服) 브랜드 상품기획(商品企劃) 실태조사(實態調査) 연구(硏究))

  • Park, Eun-Mi;Sohn, Hee-Soon
    • Journal of Fashion Business
    • /
    • v.3 no.1
    • /
    • pp.113-124
    • /
    • 1999
  • The purpose of this study is to provide for the basic data useful to designing a scientific and systematic merchandising program for infants' wear brands. For this purpose, designer and MD working for 8 local infants' wear brands were surveyed to analyze the conditions of their designing and merchandising of infants' wears. The results of this study can be summarized as follows; 1. Only 3 brands employed MD for their merchandising departments. The average number of clothing designers employed by the subject brands was 3-5, while that of colorists was 1-2, and that of accessory designers was 2-3. On the other hand, the average number of patternmakers employed was about 1, while that of sewer was 4. 2. Many of the sample infants' wear brands tended to collect and analyze the information for merchandising, while most of them relied less on outside planned data. The information source upon which they relied most was 'local and foreign fashion magazine', followed by 'data surveyed by local and foreign department stores' and 'data surveyed for local fabric markets' in their order. Meanwhile, the main color represented 70-90% of the total colors, while the pastel groups accounted for 30-40% and vivid color groups for 40-50%. On the other hand, knit accounted for about 60% of their materials, while woven and sweater accounted for 30% and 10%, respectively. 3. In overall terms, most of brands felt that their brands were preferred as much as or less than their competitive brands, while consumers felt expensive for infants' wears. Namely, most consumers were dissatisfied with the price levels of infants' wears. On the other hand, consumers were found to favor the pastel color groups a little more, while being aware of each brand's sizes more or less precisely. 4. The medium upon which the infants' wear brands depended most for their advertisement was 'magazine', followed by 'radio' and 'catalogue' in their order. Most of them were analyzing the results of their sale turnover monthly or frequently in order to review their sales performances in comparison with their competitors. Most of brands bothered to program a sale strategy 4 times a year, primarily to dispose the stocks or find a breakthrough for their sales activities.

  • PDF

Development of a flower support for real flower decoration Automatic Production System (생화 장식 꽃받침 자동 생산 시스템 개발)

  • Song, Myung-Seok;Kim, Man-Joong;Kim, Seon-Bong;Ji, Peng;Ryuh, Beom-Sahng
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.19 no.7
    • /
    • pp.63-71
    • /
    • 2018
  • A flower support was developed for real flower decoration automation production system using an ultrasonic wave sealer to automatically produce a system. Because a flower support for real flower decoration that was produced manually could not meet the needs of the consumers, this study developed an automated manufacturing system to increase productivity. A flower support for real flower decoration was constructed using a cap consisting of plastic and plate made from non-woven fabric. The guide was designed to transport the cap to the ultrasonic wave sealer and optimal guide was developed from the test according to the material and shape. To produce the entire system, the guides and accessories were weighed and appropriate motors and pulleys were calculated. Control of the automation production system was based on a PCB board, which increased the reliability and security, and a remote controller with manual and automatic modes was prepared. After development, tests of the transfer precision and repetition accuracy revealed an X-axis of 2.7mm, a Y-axis of 1 mm, and a repetition of 0 mm. The productivity was also checked. The automated machine worked 8 hours/day to make 35 supports and 70 Therefore, the automatic system produces 200% more output than manual work

Art and Collectivity (미술과 집단성)

  • Kwok, Kian-Chow
    • The Journal of Art Theory & Practice
    • /
    • no.4
    • /
    • pp.181-202
    • /
    • 2006
  • "When it comes to art, nationalism is a goodticket to ride with", says the title of a report in the Indian Express (Mumbai, 29 Oct 2000). The newspaper report goes on to say that since Indian art was kept "ethnic" by colonialism, national liberation meant opening up to the world on India's own terms. Advocacy, at the tail end of the 20th century, would contrast dramatically with the call by Rabindranath Tagore, the founder of the academy at Santiniketan in 1901, to guard against the fetish of nationalism. "The colourless vagueness of cosmopolitanism," Tagore pronounced, "nor thefierce self-idolatry of nation-worship, is the goal of human history" (Nationalism, 1917). This contrast is significant on two counts. First is the positive aspect of "nation" as a frame in art production or circulation, at the current point of globalization when massive expansion of cultural consumers may be realized through prevailing communication networks and technology. The organization of the information market, most vividly demonstrated through the recent FIFA World Cup when one out of every five living human beings on earth watched the finals, is predicated on nations as categories. An extension of the Indian Express argument would be that tagging of artworks along the category of nation would help ensure greatest reception, and would in turn open up the reified category of "art," so as to consider new impetus from aesthetic traditions from all parts of the world many of which hereto fore regarded as "ethnic," so as to liberate art from any hegemony of "international standards." Secondly, the critique of nationalism points to a transnational civic sphere, be it Tagore's notion of people-not-nation, or the much mo re recent "transnational constellation" of Jurgen Habermas (2001), a vision for the European Union w here civil sphere beyond confines of nation opens up new possibilities, and may serve as a model for a liberated sphere on global scale. There are other levels of collectivity which art may address, for instance the Indonesian example of local communities headed by Ketua Rukun Tetangga, the neighbourhood headmen, in which community matters of culture and the arts are organically woven into the communal fabric. Art and collectivity at the national-transnational level yield a contrasting situation of, on the idealized end, the dual inputs of local culture and tradition through "nation" as necessary frame, and the concurrent development of a transnational, culturally and aesthetically vibrant civic sphere that will ensure a cosmopolitanism that is not a "colourless vagueness." In art historical studies, this is seen, for instance, in the recent discussion on "cosmopolitan modernisms." Conversely, we may see a dual tyranny of a nationalism that is a closure (sometimes stated as "ethno-nationalism" which is disputable), and an internationalism that is evolved through restrictive understanding of historical development within privileged expressions. In art historical terms, where there is a lack of investigation into the reality of multiple modernisms, the possibility of a democratic cosmopolitanism in art is severely curtailed. The advocacy of a liberal cosmopolitanism without a democratic foundation returns art to dominance of historical privileged category. A local community with lack of transnational inputs may sometimes place emphasis on neo-traditionalism which is also a double edged sword, as re kindling with traditions is both liberating and restrictive, which in turn interplays with the push and pull of the collective matrix.

  • PDF

Sustainability Indices (=Green Star) for Microbial Fuel Cell (미생물 연료전지 영속발전 지표개발)

  • Song, Ha-Geun;KOO, Ja-Kong
    • Journal of the Korea Organic Resources Recycling Association
    • /
    • v.23 no.2
    • /
    • pp.47-52
    • /
    • 2015
  • A microbial fuel cell (MFC) is a device that can be obtained electricity from a variety of organic through the catalytic reaction of the microorganism. The MFC can be applied to various fields, and research is required to promote the performance of the microbial fuel cell for commercialization. The lower performance of an MFC is due to oxygen reduction at the cathode and the longer time of microbial degradation at anode. The MFC amount of power is sufficient but, in consideration of many factors, as a renewable energy, now commonly power density as compared to Nafion117 it is an ion exchange membrane used is PP (Poly Propylene) from 80 to about 11 fold higher, while reducing the cost to process wastewater is changed to a microporous non-woven fabric of a low cost, it may be energy-friendly environment to generate electricity. All waste, in that it can act as a bait for microorganisms, sustainability of the microbial fuel cell is limitless. The latest research on the optimization and performance of the operating parameters are surveyed and through the SSaM-GG(Smart, Shared, and Mutual- Green Growth) or GG-SSaM(Green Growth - Smart, Shared, and Mutual) as the concept of sustainable development in MFC, the middle indices are developed in this study.

An Evaluation on the Growth Rates of Magnolia denudata and Albizzia julibrissin Produced in Containers (컨테이너에서 재배된 백목련과 자귀나무의 이식전후 생장률 평가)

  • 김태진;김학범
    • Journal of the Korean Institute of Landscape Architecture
    • /
    • v.29 no.5
    • /
    • pp.92-100
    • /
    • 2001
  • This study was conducted to evaluate the growth rate of landscape trees produced in containers for three year, and the growth rate of the establishment period during sixth month~twelve months after transplanting. Two types of container such as plastic pot(pot) and fabric growing bag(bag) were adopted to restrict tree roots. Each type of container was divided into seven sub-types. One traditional production method was included as comparison. Two landscape woody plant species (Magnolia denudata, Albizzia julibrissin) were planted in the seven sub-types of container. After one or two growing season in the container, the trees of each container type were transplanted. Half of the trees were transplanted in the mild spring season, and the other half were transplanted in the improper summer season. The data was collected on the diameter of root cellar and the tree height in each year. The research results are as follows; 1. Container production method was lower than the traditional production methods by 1.3 times ~ 2 times in the growth rates. 2. The Geocell bag and Root control bag revealed higher growth rates than pp-woven bag. And pot- in-pot(double pot)system revealed higher growth rates than the ether container pot system in A denudata. There were no differences in the growth rates between container production system in Albizzia julibrissin. 3, The growth rates of improper transplanting trees was high in the \"pot\" type - \"bag\" type - \"control\" in descending order. Especially, the growth rates of \"pot\" type revealed higher than \"control\" by 4 times. 4. From the results of ANOVA and Ad hoc test, the variable of growth factors of each container types in improper transplanting experiment was not significant for a range of 5% or 1% level. And the growth rates of traditional production method was lower than the container production method. 5. There was no differences in growth rate between the containerized and the traditional production system in the case of proper transplanting experiment. The growth rates of diameter of root collar was higher in the \"control\". The growth rates of tree height was higher in the \"bag\" type. Finally, based upon the results of this study, subsequent research on the development of container materials and maintaining methods that focused on the growth rates would be required.aintaining methods that focused on the growth rates would be required.

  • PDF

Effect of Covering Method of Ventilating Non-Woven Fabric and $\textrm{GA}_3$ Treatment on the Growth and Yield of Leaf Lettuce during Low Temperature Season (통기성 부직포의 피복방법 및 $\textrm{GA}_3$ 처리가 저온기에 잎상추의 생육 및 수량에 미치는 영향)

  • 최영환;손병구;강점순;안종길
    • Journal of Bio-Environment Control
    • /
    • v.12 no.2
    • /
    • pp.72-76
    • /
    • 2003
  • This study was conducted to estimate stimulation of plant growth of green and red leafy lettuces (Lactuca sutiva L. cv. Chungchima and Jugchima) at affected by covering method and time with protected film materials containing concentrated PO film and GA$_3$ foliar spray. Plants were covered with ‘Pasraido’ material from October 26 to November 31 (direct 1), from November 5 to November 31 (direct 2), or with a tunnel, or direct 2+ tunnel. Mean air temperature and relative humidity under the covering were higher in direct and tunnel, direct and non-covering, in that order. The fresh weight and dry weight of red and green lettuces increased in direct and tunnel followed by direct 1, direct 2, tunnel and the control. GA$_3$ treatment promoted the growth in all covering methods, but decreased the chlorophyll contents. Fresh weight and dry weight were higher in red lettuce than in green lettuce in the control.

A Study on Dynamic Moisture Transfer in Textiles Using Cobaltous Chloride Method (염화코발트법을 이용한 직물의 동적 수분전달에 대한 연구)

  • Hong Kyunghi;Kim Eunsook
    • Journal of the Korean Society of Clothing and Textiles
    • /
    • v.13 no.4
    • /
    • pp.400-411
    • /
    • 1989
  • Moisture related properties of fabrics in dynamic modes are considered to be important in the judgement of the subjective comfort characteristics of clothing fabrics. In the current study, an attempt to improve the cobaltous chloride test method was made which has been known as a convenient screening test for dynamic surface wetness. The color changes of cobaltous chloride treated fabrics on the simulated sweating skin were calibrated against standard color strips. The standard color strips were made of all typs of test fabrics and installed inside of the test tubes containing a series of saturated salt solutions, which gives more quantitative informations on dynamic moisture transfer Influences of fiber types and finishes on dynamic moisture transfer in textiles were studied using a single layer of fabric samples. Fiber types included $100\%$ cotton, C/P 50/50, C/P 35/65. Durable press and soil release finished cotton and C/P 50/50 fabrics were also included. There were significant fiber effects on the dynamic moisture transfer. The order of time taken to reach to the specified $\%$ RH was C/P 35/65$100\%$ cotton fabrics. It was possible to detect significant finish effects by increasing the concentrations of cobaltous chloride solutions. The order of time taken to reach to the specified $\%$ R.H was durable press$100\%$ cotton, C/P 50/50, C/P 35/65 and $100\%$ PET were placed at the inner side of the outer layer and tested. It was shown that cobaltous chloride treated $100\%$ cotton fabirc was easier to detect color changes than C/P blend fabic in the double layer experiments. By placing test sample under the cobaltous chloride treated cotton fabrics, it was able to detect the differences among the test samples, some of which were known to be difficult in padding with cobaltous chloride solutions. Besides, the double layer method would provide with the broader application of the cobaltous chloride method in !uture, since it is possible to test the dynamic moisture transfer of clothing as worn.

  • PDF

Expression Methods of Peony Patterns in Korean Textiles (한국 직물 모란무늬의 표현방법에 관한 연구)

  • Qiao, Dan;Jeong, Youngok;Lee, Eunjin
    • Journal of the Korean Society of Costume
    • /
    • v.62 no.7
    • /
    • pp.13-28
    • /
    • 2012
  • This study examines history of Korean peony patterns and characteristics of peony patterns on the fabric. It is classified according to expression methods, and it analyzes the characteristics of 71 kinds of peony woven on 66 Korean fabrics. First, it was observed that 38 of the 66 studied fabrics (57.6%) were relics from the 17th century, and from this it can be deduced that the peony patterns began to appear regularly around the latter half of the 16th century and were used habitually in the 17th century. Second, 71 kinds on 66 fabrics can be divided into Real Type, Design Type, and Abstraction Type according to expression methods. Among these types, 49 kinds of them are Real Types (69.0%), forming the greatest part and 19 kinds belonging to the Design Type (26.8%), and lastly, 3 kinds were under the Abstraction Type (4.2%). In particular, peony patterns of Design Types and Abstraction Types from the 17th century and from the 19th century to the 20th century were more prevalent, compared with those before the 16th century or the 18th century. Third, Real Types shown on the Korean fabrics are subdivided into 9 types, and the Real Type A among them, which describes to be as real as possible, is 12 kinds, the largest number of them. Therefore, real and natural pattern of peony is the favorite type in Korea, while rather emphasized pattern of peony is the more preferred pattern in China. And also Design Types are subdivided into 6 types again; There are 6 kinds of design type A, the largest part of Design Types. Patterns of Design Type A are most similar to real peony flowers, but more simplified than the Real Type A. This result also contrasted with the trend in China, where the Design Type C, expressed petals in detail was the favored pattern. Fourth, 9 kinds of unique types are found in Korean fabrics, especially Real Type M has not been shown on Chinese fabrics. Real type M, consisting of two parts, inner and outer, where two curve lines between two parts appear as antennas of a butterfly.

Analysis on Heating Effects of the Vertical Type Geothermal Heat Pump System

  • Kang, Youn Ku;Ryou, Young Sun;Jang, Jae Kyung;Kim, Young Hwa
    • Journal of Biosystems Engineering
    • /
    • v.39 no.2
    • /
    • pp.69-75
    • /
    • 2014
  • Purpose: This paper is aimed at analyzing the heating performance of the vertical closed loop type Geothermal Heat Pump System (GHPS) distributing the farm site and providing basic data of the GHPS. Method: Seedling greenhouse heating was made from October 2012 to May 2013. The seedling greenhouse was divided into 4 sectors (A, B, C and D zone, total $3,300m^2$) with different temperatures. It was heated from 5PM to 8AM, and during the night the greenhouse was covered by non-woven fabric thermal curtains along the upper 2m of the greenhouse for temperature maintenance. In order to analyze the heating performance of the GHPS, power consumption and operating time of the GHPS, inlet and outlet water temperature of the condenser, temperatures of each zone of the greenhouse, and ambient temperature were measured. Results: When operating only one heat pump unit, heat generated in the condenser decreased as the experiment progressed and power consumption increased correspondingly. However, the heating coefficient of performance decreased from 3.3 to 2.0 rapidly. Also, when operating two heat pump units, heat generated in the condenser decreased and power consumption increased. Heating coefficient of performance decreased from 4.5 to 3.7 rapidly. When the set temperature of the greenhouse was $13.7{\sim}20.1^{\circ}C$ and minimum ambient temperature was $-20.8{\sim}4.8^{\circ}C$, the annually accumulated heat and power consumption were 520,623 kW, 142,304 kW, respectively. Conclusion: When the set temperature of the greenhouse was $13.7{\sim}20.1^{\circ}C$ and the minimum ambient temperature was $20.8{\sim}4.8^{\circ}C$, the annually accumulated heat and power consumption were 520,623 kW, 142,304 kW, respectively. When operating only one heat pump unit, the heating COP was 2.0~3.3, and when operating 2 heat pump units, it was 3.7~4.5. If several heat pumps are installed in one GHPS, it is suggested that all heat pumps be operated except in special cases. Because the scale of the water pumps are set to the scale of when all heat pump units are operating, if even one unit is not operating, the power consumption will increase. That becomes the cause of COP decrease.