• Journal of Bio-Environment Control
• /
• v.11 no.2
• /
• pp.88-92
• /
• 2002

The study was conducted to estimate stimulation of plant growth of blue and red leaf lettuce (Lactuca sativa L.) as affected by covering methods with vinyl materials containing concentrated PO film. Plants were grown in direct, direct and tunnel, and tunnel covering with 'Pasraido materials' from October 13 to 31. With the covering mean air temperature, soil temperature, leaf temperature and relative humidity remarkedly increased. Higher temperature was observed in the order of direct and tunnel, direct, tunnel covering and the control. Photosynthetic photon flux (PPF, $\mu$mol m$^{-2}$ . s$^{-1}$ ) was observed in reverse order of temperature. Concentration of $CO_2$ was higher during night than during day under the light. Accumulation of highest $CO_2$ at night was obtained from direct coverings followed by direct and tunnel, tunnel covering and the control. Plant height, leaf number and leaf area of blue and red lettuces were stimulated by direct covering. However, there was no significant difference.

• Journal of the Korean Society of Costume
• /
• v.36
• /
• pp.53-75
• /
• 1998

The kind, the structure, and the motif of the Chosun dynasty's fabrics found mainfy within the Buddhist statues were studied. The total of 62 pieces of fabrice can be classified chronologically as follows ; 27 pieces in the year of 1431, 20 pieces of 1550, 9 pieces of 1664, and 6 pieces of 1735. These 62 fabrics also categorized by the weaving method as follows; 27 plain weaved, 17 twill weaved, 10 pieces of satine weaved, 7 pieces of Leno weaved, and 1 piece of double weaved fabrics. Most of the studied fabrics were silk, the rest were 2 pieces of yam and 1 piece of cotton, Kyun, Chu, and Cho were the plain weaved silk as Nung and Ki were the twill weaved silk, Satine weaved silk was called as Dan and double weaved silk was called Chikum in the Chosun dynasty. 1. The antique fabrics were composed of mainly silk. This is believed due to the utmost devotion to the buddhist statue as an object of worship. 2. In the fabric's structural point of view, th ecrossed 4-ply threads of warp yarn which is one of Leno weaved can be observed fre-quently in the period of Korea dynasty's fabrics. But it started to disappear in the beginning of Chosun dynasty, since only one piece of Ra could be found in the 1431's fabrics. Keum, one of the double weaved structure is assumed to be extinct from the Korea dynasty. Satin weaved fabrics started to be woven from the latter period of Korea dynasty and was very popular in Chosun dynasty. 3. The widths of fabrics in the Chosun dynasty gradually decreased compared with those of Korea dynasty.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.10
• /
• pp.1261-1266
• /
• 2012

In this study, salt-water immersion tests were experimentally performed for up to 12 months to investigate the hygrothermal effect of salt-water environments on the mechanical properties of carbon/epoxy composites. The composites were manufactured by laminating prepregs composed of carbon plain-woven fabric and epoxy resin. The specimens were subjected to temperatures of 35, 55, and $75^{\circ}C$ while being exposed to the salt-water environments. Mechanical test results showed that the tensile modulus and tensile strength decreased at a small rate, and the compressive modulus and compressive strength decreased at a relatively larger rate, as the exposure temperature and time increased. The rate of decrease in compressive strength became larger as the exposure temperature became higher. This is because a higher environmental temperature accelerates the salt-water uptake; this, in turn, reduces the compressive strength more rapidly.

• Fashion & Textile Research Journal
• /
• v.18 no.4
• /
• pp.412-423
• /
• 2016

This paper explores the possibility, and suggests an experimental procedure, of industrial application of traditional textile design techniques, such as hand silkprinting and natural dyeing. Theoretical and traditional background of this study is William Morris and his followers' Arts and Crafts Movement from the late 19th century to the early 20th century, which laid the philosophical as well as technical foundations of modern textile design tradition. Based on the basic understanding of the design philosophy, and starting from the design techniques of Morris and his successors, I made some experimental and systematic color plans reflecting and exploiting the physical traits and structure of jacquard woven silk material fabrics. And I applied hand silkscreen printing techniques on the jacquard silk fabrics of my own making, while testing various color combinations of natural dyes. After finishing final processing of design samples, I could get textile design products which met the criteria of my original expectation, i.e., eco-friendly and aesthetic design samples that can also be produced in automatized mass production system of contemporary textile industry. The conclusion of this experimental study is that I can expect the natural dyeing techniques, jacquard silk fabrics design techniques, silkprinting techniques, and the basic processes used in this study to be safely applied for contemporary commercial textile industry utilizing automatized silkscreen printing system and digital printing devices.

• Journal of the Society of Naval Architects of Korea
• /
• v.57 no.2
• /
• pp.104-113
• /
• 2020

The study aims to improve the previous theory-based algorithm on the lightweight design of laminate structures of a composite ship based on the mechanical properties of fiber, resin, and laminates obtained from experiments. From a case study on using a hydrometer to measure the specific gravity of e-glass fiber woven roving fabric/polyester resin used as the raw material for the hull of a 52 ft composite ship, the equation for calculating the weight of laminate was redefined, and the relationship between decreasing mechanical properties and increasing glass content was determined from the results of material testing according to ASTM D5083 and ASTM D790. After applying these experimental data to the existing algorithm and improving it, a possible laminate design that maximizes the specific strength of the composite material was confirmed. In a case study that applied the existing algorithm based on rules, the optimal lightweight design of composite structures was achieved when the weight fraction of e-glass fiber was increased by 57.5% compared with that in the original design, but the improved algorithm allowed for an increase of only 17.5%.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.645-649
• /
• 2009

Liquid desiccant cooling technology can supply cooling by using waste heat and solar heat which are hard to use effectively. For compact and efficient design of a dehumidifier, it is important to sustain sufficient heat and mass transfer surface area for water vapor diffusion from air to liquid desiccant on heat exchanger. In this study, the plate type heat exchanger is adopted which has extended surface, and hydrophilic coating and porous layer coating are adopted to enhance surface wettedness. PP(polypropylene) plate is coated by porous layer and PET(polyethylene terephthalate) non-woven fabric is coated by hydrophilic polymer. These coated surfaces have porous structure, so that falling liquid film spreads widely on the coated surface foaming thin liquid film by capillary force. The temperature of liquid desiccant increases during dehumidification process by latent heat absorption, which leads to loss of dehumidification capacity. Liquid desiccant is cooled by cooling water flowing in plate heat exchanger. On the plate side, the liquid desiccant can be cooled by internal cooling. However the liquid desiccant on extended surface should be moved and cooled at heat exchanger surface. Optimal mixing and distribution of liquid desiccant between extended surface and plate heat exchanger surface is essential design parameter. The experiment has been conducted to verify effective surface treatment and distribution characteristics by measuring wall side flow rate and visualization test. It is observed that hydrophilic and porous layer coating have excellent wettedness, and the distribution can be regulated by adopting holes on extended surface.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.11
• /
• pp.1792-1801
• /
• 2008

This study was to develope the pesticide-proof clothes(PPC) for fruit-grower which has been well known over applied agricultural chemicals. The ergonomic evaluation of PPC were tested in two ways. Male adults volunteered the tests to evaluate the safety to pesticide in the field and the thermal comforts in the climate-chamber($30^{\circ}C$, 60%R.H.). PPC were made of 4 different fabrics. Two of them were on the market(coated non-woven and coated nylon). Others were water-repellent treatment and coated waterproof film by developed polyester. The field study was conducted for farmers growing apples to evaluate pesticide exposure. In this experiment, we collected data with patch test on the head, chest, back, right upperarm, right forearm, left thigh and left calf. From the results, the developed PPC showed the more excellent comfort than an existing PPC with nylon coated polyurethane. But the developed PPC of water-repellent fabric was penetrated into the PPC. Therefore, we designed the functional pesticide-proof clothes of 2 different developed polyester fabrics(water-repellent treatment in chest, abdomen, the lower of back, waist, and calf; coated waterproof film in head, shoulder, the upper of back, the crotch, hip, upper arm and thigh).

• Composites Research
• /
• v.23 no.1
• /
• pp.44-50
• /
• 2010

In this paper, two different experiments, namely, salt water spray and salt water immersion, were performed to reproduce the contact of composites with the seawater for three kinds of woven fabric composite material systems which would be used for the WIG(wing in ground effect)craft. After aging 140 days in the salt water environment, material properties of carbon/epoxy and glass/epoxy composite such as tensile, compressive and shear stiffness and strength, and inter-laminar shear strength (ILSS) were measured. By comparing baseline material properties with degraded ones, the effects of the salt water environment on the composite mechanical properties were evaluated. From the experiments, it was confirmed that the difference in aging conditions had very small influence on composite properties. And it was found that tensile strength of carbon/epoxy composites showed little degradation, but much more degradation was observed in glass/epoxy composites. And large degradations on matrix dominant properties were observed. The salt water could damage the fiber-matrix interface, matrix properties and the glass fiber.

• Science of Emotion and Sensibility
• /
• v.10 no.4
• /
• pp.623-629
• /
• 2007

Recently, the $"Optim"^{(R)}$ which is the wool fibre with high lustre developed by CSIRO in Australia is imported and commercialized as a high sensible fabrics for garment. But the price of this $"Optim"^{(R)}$ fibre is very high so material demand and supply is not smooth. This study is aiming to develop the drawing technology of the worsted yarn with washable function, lustre and low production cost. For this purpose, drawing yarns are made using developed drawing machine and high sensible fabrics are woven using this yarns, and various physical properties of the fabric specimen are measured and analysed with garment characteristics such as sewability and formability. The final objective of this study is seemed to be achieved by making the high sensible fabrics using drawing worsted yarns with high lustre such as $"Optim"^{(R)}$ fibre.

• Journal of the Korea Furniture Society
• /
• v.22 no.3
• /
• pp.151-159
• /
• 2011

This study is to suggest versatile chair designs that are organically shaped to take individual orientation. This study intends to provide design method to ensure the face of the chair that contacts the body of its user is transformed flexibly to support the body. The movement of human body is not just a behavior but the ways and tools that reflexively express against external stimuli that are sensed and identified by the person. The versatile chair whose users' sitting position is fixed is made by covering the lump form with a piece of cloth ensuring that the content is firmly fixed and by placing the beads-woven wood fabric according to the shape. And then, it is covered with the external cover. The proposed versatile chair designs assume specific forms as follows: First, it is a versatile chair whose user's sitting position can fix. The organically-shaped form that can accept varying postures is made as a mass, which changes into different shapes when human body touches the form so that users can lie down or sit. Due to such transformation, body posture is determined and individual differences in shape changing are all acceptable. Second, it is a versatile chair that reflects the user's position in a fixed chair, where a cloth-wrapper feature is applied to the form a sifit wrapped postures so that a variety of body postures can be accepted. Finally, a versatile chair that reflects the user's position by changing the shape of is covered with forms so that it will be transformed and used in accordance with situations and chair shapes and reflect multiple shapes including round or square ones.