• 대한기계학회논문집A
• /
• 제34권6호
• /
• pp.717-723
• /
• 2010

많은 연구자들이 평직 탄소섬유강화플라스틱에 대해서 연구해왔지만 피로 균열 진전에 관한 연구는 아직도 미지한 상태이다. 그리고 하중과 섬유 배열 각도에 따라 균열 진전 양상이 다름을 알 수 있다. 본 연구에서는 서로 다른 두 개의 섬유 배열각도($0^{\circ}$, $45^{\circ}$)에서 평직 탄소섬유강화플라스틱의 피로 균열 진전에 대해 연구하였다. 평직 탄소섬유강화플라스틱의 피로 균열 진전 테스를 하중비 0.1에 10Hz로 수행하였다. 그 시험 결과로써, 피로 균열 진전 속도(da/dN)와 에너지해방률(${\Delta}G$)과의 그래프를 도출하였고, 섬유 배열 각도에 따른 균열 진전 양상을 $0^{\circ}$의 경우에는 Mode I를 적용하였고, $45^{\circ}$의 경우에는 Mixed Mode를 적용하였다.

• 한국정밀공학회지
• /
• 제30권1호
• /
• pp.39-46
• /
• 2013

Smart material such as SMA (Shape Memory Alloy) has been studied in various ways because it can perform continuous, flexible, and complex actuation in simple structure. Smart soft composite (SSC) was developed to achieve large deformation of smart material. In this paper, a shell actuator using woven type SSC was developed to enhance stiffness of the structure while keeping its deformation capacity. The fabricated actuator consisted of a flexible polymer and woven structure which contains SMA wires and glass fibers. The actuator showed various actuation motions by controlling a pattern of applied electricity because the SMA wires are embedded in the structure as fibers. To verify the actuation ability, we measured its maximum end-edge bending angle, twisting angle, and actuating force, which were $103^{\circ}$, $10^{\circ}$, and 0.15 N, respectively.

• 대한소아치과학회지
• /
• 제26권1호
• /
• pp.62-68
• /
• 1999

One of the many dilemmas that the clinical restorative dentist must face is treating young adolescent patient who prematurely loses his permanent teeth. Temporary prosthetic replacement can be achieved with removable denture, orthodontic band-wire fixed denture, adhesion bridge, composite resin splint with reinforcing material until the patients go through growth and development. But, all of these have limitations. Advances in restorative materials and reinforcement materials have made possible new techniques which are as much esthetic, conservative and more economic and stronger than adhesion brides. Two cases are being presented where gas-plasma treated, woven polyethylene fabric to reinforce composite resin was used to fabricate a temporary prosthetic restoration to replace a missing maxillary central incisor. This relatively noninvasive and basically reversible procedure allows the patient to decide the final restoration as he or she goes thorough maturation of the hard and soft tissues.

• Structural Engineering and Mechanics
• /
• 제80권5호
• /
• pp.503-522
• /
• 2021

This paper investigates experimentally and numerically the influence of drilling process on the mechanical and thermomechanical behaviors of woven glass fiber reinforced polymer (GFRP) composite plate. Through the experimental analysis, a CNC machine with cemented carbide drill (point angles 𝜙=118° and 6 mm diameter) was used to drill a woven GFRP laminated squared plate with a length of 36.6 mm and different thicknesses. A produced temperature during drilling "heat affected zone (HAZ)" was measured by two different procedures using thermal IR camera and thermocouples. A thrust force and cutting torque were measured by a Kistler 9272 dynamometer. The delamination factors were evaluated by the image processing technique. Finite element model (FEM) has been developed by using LS-Dyna to simulate the drilling processing and validate the thrust force and torque with those obtained by experimental technique. It is found that, the present finite element model has the capability to predict the force and torque efficiently at various drilling conditions. Numerical parametric analysis is presented to illustrate the influences of the speeding up, coefficient of friction, element type, and mass scaling effects on the calculated thrust force, torque and calculation's cost. It is found that, the cutting time can be adjusted by drilling parameters (feed, speed, and specimen thickness) to control the induced temperature and thus, the force, torque and delamination factor in drilling GFRP composites. The delamination of woven GFRP is accompanied with edge chipping, spalling, and uncut fibers.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 춘계학술발표대회 논문집
• /
• pp.85-88
• /
• 2000

• Composites Research
• /
• 제18권4호
• /
• pp.44-51
• /
• 2005

본 논문에서는 3차원 직교 직물 복합재료의 구성성분인 얀(Yarn)의 기하학적인 형상을 고려하여 직접수치모사(DNS) 모델을 개발하고 이를 이용하여 직교 직물 복합재료 평판의 저속충격 현상을 모사하였다. 미시구조를 보다 상세하고 정확하게 고려하기 위하여 토우 간격과 굴곡 등을 고려한 단위 구조를 제시하고 이를 이용하여 DNS 기반의 평판모델을 구현하였다. 정적 가상 실험을 통하여 얻은 DNS 모델의 거시적 등가 물성치를 바탕으로 한 거시기계학적 해석과의 비교하였고, DNS 모델을 이용하여 기존의 거시기계학적 모델에서 구현이 어려운 기하학적인 형상 차이에 따른 저속충격 현상의 영향을 고찰하였다. 그리고 보다 실제 실험에 가까운 가상 시편의 크기를 고려하고 해석의 효율성을 높이기 위하여 DNS개념에 기반한 멀티스케일 모델을 개발하여 거시/미시 해석 결과 특성을 함께 고찰하였다.

• Advanced Composite Materials
• /
• 제17권3호
• /
• pp.247-258
• /
• 2008

This paper is concerned with the long-term performance of geo-textile (GT) composites in terms of creep deformation and frictional properties. Composites of PVA GT and HDPE GM were made to investigate the advanced properties of long-term performance related to waste landfill applications. The same experiments were also performed for typical polypropylene and polyester GT and compared to PVA GT/HDPE GM composites. We also develop high performance GT composites with GM by using PVA GT, which is capable of improving the frictional properties and thus enhances long-term performance of GT composites. Experimental study reveals that the friction coefficient of GT composites is relatively large compared with those of polyester and polypropylene non-woven GT as long as the friction media has similar size to the particles of domestic standard earth. In addition, the geo-composites bonded with geo-grid by a chemical process were investigated experimentally in terms of strain evaluation and creep response values. Geo-grid plays an important role as a reinforcing material. Three kinds of geo-grid were prepared as strong yarn polyester and they were woven type, non-woven type, and wrap knitted type. The sample geo-grids were then coated with PVC. The rib tensile strength tests were conducted to evaluate geo-grid products in terms of tensile strength with regard to single rib. The test was performed according to GRI-GGI. It was concluded again from the experiments that the tensile and creep strains of the geo-grid showed such stable values that the geo-grid prepared in this study could protect geo-textile partially in practical structures.

• Composites Research
• /
• 제30권1호
• /
• pp.26-34
• /
• 2017

본 연구에서는 직물섬유 복합재의 열전도를 구하는데 있어 기존의 연구보다 개선된 방법을 제시하고, 직물섬유의 기하학적 구조가 복합재의 열전도도 향상에 미치는 영향, 그리고 유전 알고리즘(Genetic algorithm)을 이용하여 복합재의 열전도도 향상을 위한 최적구조 설계에 관한 연구를 하였다. 직물섬유의 구조를 토우의 물결무늬와 너비 및 두께를 이용하여 구현하였고, 열전도도는 열전기유사법(Thermal-electrical analogy)을 이용하여 구하였다. 유전 알고리즘에서 염색체 문자열은 fill과 warp tow의 두께와 너비로 하였고 복합재의 열전도도를 향상 시키는 방향으로 목적함수를 정하였다. 연구결과 직물섬유 복합재의 열전도도를 예측을 위한 향상된 방법이 제시되었고, 섬유토우 사이의 간격(inter-tow gap)이 넓어 질수록 복합재의 열전도도가 감소하는 것으로 나타났다. 직물섬유 복합재의 구조 최적화에서는 이론적 수치해석 결과가 제시되었는데, 전체적으로 섬유토우(tow)의 축의 수직방향보다는 축 방향의 열전도도 성분이 복합재의 전체 열전도도 향상에 크게 기여를 하는 것으로 나타났다.

• 대한기계학회논문집A
• /
• 제33권4호
• /
• pp.360-365
• /
• 2009

In the manufacture of CFRP(Carbon Fiber Reinforced Polymer Composite) composite structures, various independent components join by bolts and pins. Holes for bolts and pins have an effect on the failure strength of such structures, because those act as notches in structures. The failure characteristic of such structures are different from those of plain plate subject to remote load. In this paper, tensile properties of woven CFRP composite plates with laminates of $0^{\circ}$, $30^{\circ}$ and $45^{\circ}$ were obtained according to ASTM D 3039. By using obtained tensile failure strength and Tan-Cheng failure criterion, tensile failure strength of CFRP laminate with arbitrary fiber angle were evaluated. Also, the degradation of tensile properties by center hole(${\phi}10mm$) with a remote load was evaluated and the failure strengths were applied to Tan's failure criterion, similarly.

• Steel and Composite Structures
• /
• 제22권4호
• /
• pp.777-796
• /
• 2016

In this paper, the behavior of woven E-glass fabric composite laminate was experimentally investigated under quasi-static indentation and high velocity impact by flat-ended, hemispherical, conical (cone angle of $37^{\circ}$ and $90^{\circ}$) and ogival (CRH of 1.5 and 2.5) cylindrical perforators. Moreover, the results are compared in order to explore the possibility of extending quasi-static indentation test results to high velocity impact test results in different characteristics such as perforation mechanisms, performance of perforators, energy absorption, friction force, etc. The effects of perforator nose shape, nose length and nose-shank connection shapes were investigated. The results showed that the quasi-static indentation test has a great ability to predict the high velocity impact behavior of the composite laminates especially in several characteristics such as perforation mechanisms, perforator performance. In both experiments, the highest performance occurs for 2.5 CRH projectile and the lowest is related to blunt projectiles. The results show that sharp perforators indicate lower values of dynamic enhancement factor and the flat-ended perforator represents the maximum dynamic enhancement factor among other perforators. Moreover, damage propagation far more occurred in high velocity impact tests then quasi-static tests. The highest damage area is mostly observed in ballistic limit of each projectile which projectile deviation strongly increases this area.