• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.321-326
• /
• 2008

Light weight of vehicles by composite materials makes possible high speed, energy saving, and low repair cost. As Bimodal Tram and Tilting Train eXpress(TTX) use carbon composite material for their bodies, safety for passengers and electrical devices against unexpected failures has been issued more than ever. Lightning strike which generates high voltages and large currents is the worst case for the safety of passengers and devices. With this background, we experimentally investigated the insulation breakdown phenomena on carbon composite materials by the application of lightning surge voltage and current. From the experimental results, we could estimate whether the composite body is safe or not for the inside passengers and devices against lightning strikes.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.5
• /
• pp.411-416
• /
• 2014

In this research we present design optimization methods for a vehicle-mounted satellite antenna positioner. Our initial antenna positioner was conservatively designed to satisfy a worst case scenario where wind blew across the positioner at the speed of 120 km/h. Investigating stresses and safety based on Finite Element Methods (FEM), we find reflector support frames can be optimized to significantly reduce the weight of the positioner system. Thus, we optimize the reflector support frame from the given initial design while considering weight, maximum stress, maximum allowable deflection, cross section, and thickness. As a result, Shape C and the thickness of 2 mm are determined for the cross section of the reflector support frame. Applying this result, the weight of the new antenna positioner is 57.343 kg, which is decreased by 10.74% compared to the initial conservative design.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.25 no.1
• /
• pp.27-36
• /
• 2000

We perform a computational complexity analysis of a heuristic algotithm proposed in the literature for the combinatorial optimization problems extended with a single side-constraint. This algorithm, although such a view was not given in the original work, is a disguised version of an optimal Lagrangian dual solution technique. It also has been observed to be a very efficient heuristic producing near-optimal solutions for the primal problems in some experiments. Especially, the number of iterations grows sublinearly in terms of the network node size so that the heuristic seems to be particularly suitable for the applicatons such as routing with semi-real time requirements. The goal of this paper is to establish a polynomal worst-case complexity of the algorithm. In particular, the obtained complexity bound suports the sublinear growth of the required iterations.

• Journal of the Korean Professional Engineers Association
• /
• v.42 no.6
• /
• pp.42-46
• /
• 2009

Every year influenza contributes to the death of 72 people in the South korea, 20,000 in the U.S. and perhaps millions worldwide. The swine fever so-called the noble flu A H1N1, a strain of the flu virus, which jumped species and burst into the human population in March and April of this year. The outbreak of 2009 novel H1N1 was the fourth in 100 years. Fortunately, it led to today's comparatively tame swine flu than the vicious 1918, which was original H1N1 pandemic flu virus, killed at least 40 million worldwide in an ongoing pandemic era. Although the 2009 H1N1 which is still in full swing, this global flu epidemic is already teaching scientists valuable lessons about pandemics. Evidence accumulated these days indicates that the 2009 H1N1 was not entirely new to all human immune systems. This article introduces only an outline for our better understanding the basic mechanisms of influenza and the vaccination about longstanding fears of that worst-case scenario engendered pandemic that are paying off today.

• Journal of the Korea Society for Simulation
• /
• v.12 no.4
• /
• pp.51-59
• /
• 2003

Real-Time applications on Grid environment have several problems in terms of resource management addressed as follows; (1) dynamic resource allocation to provide QoS objectives, (2) heterogeneous resources that is different scale, or capacity in same unit, and (3) resource availability, and resource needs. This paper describes the techniques of resource manager (RM) handling above problems to support QoS of dynamic real-time applications on Grid. The contributions of this paper to solve problems are as follows: unification of dynamic resource requirements among heterogeneous hosts, control of resources in heterogeneous environments, and dynamic load balancing/sharing. Our heuristic allocation scheme works not only 257% better than random, 142% better than round robin, and 36.4% better than least load in QoS sensitivity, but also 38.6% better than random, 28.5% better than round robin, and 31.6% better than least load in QoS.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.10
• /
• pp.879-885
• /
• 2013

By performing interval analysis on the system transfer function, we propose an improved method of control loop design for a DC/DC converter. In conventional design methods, the effect of system parameter change due to the specified range of operating conditions and production tolerances in power components should be checked a posteriori, because this may result in a transfer function shift and performance degradation. In the proposed method, a possible parameter change is considered a priori in the design step in order that the desired crossover frequency and sufficient phase margin can be achieved even in the worst case condition. As an illustrative example, a buck dc/dc converter is designed by two different methods and performance comparisons are performed to verify the feasibility of the proposed scheme.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.34C no.2
• /
• pp.50-60
• /
• 1997

Reconfiguration of a memory array using spare rows and columns has been known to be a useful technique to improve the yield. When the numbers of spare rows and scolumns are limited, respectively, the repair problem is known to be NP-complete. In this paper, we propose the reconfiguration algorithm for an array of memory cells using faulty cel clustering, which removes rows and columns algrithm is the simplest reconfiguration method with the time complexity of $O(n^2)$, where n is the number of faulty cells, however the repair rate is very low. Whereas the exhaustive search algorithm has a high repair rate, but the time complexity is $O(2^n)$. The proposed algorithm provides the same repair rate as the exhaustive search algorithm for almost all cases and runs as fast as the greedy method. It has the time complexity of $O(n^3)$ in the worst case. We show that the propsed algorithm provides more efficient solutions than other algorithms using simulations.

• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.15-19
• /
• 2003

In this paper, the bit error rate (BER) performance of the fast frequency hopping/M-ary frequency shift keying system using the clipper receiver is analyzed by using the characteristic function (CF) technique in the presence of n=1 band multitone jamming and additive white Gaussian noise environment. The CFs of the clipper receiver outputs are derived as a infinite series representation using Gamma function and Marcum's Q -function. The analytical results are validated with various simulation results. Performance comparisons with linear combining receiver are shown that the BER performance of the clipper receiver is much better than that of the linear combining receiver In addition, as the clipping level approaches to infinity, it is shown that the clipper receiver simply performs a linear combining without clipping and there exists an optimum value of diversity level (the number of hops per symbol) that maximizes the worst case BER performance of the clipper receiver.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.3
• /
• pp.617-626
• /
• 1999

For the purpose of high speed and reliable data transmission through the frequency response variation channel by load fluctuation, we present CSK signal transmission characteristics by computer simulation. Also using the simple structure of Roll-off filter at the CSK receiving system, the exact synchronization tracking and data detection without error at the worst case of S/I=2 and S/N=2 were achieved.

• IE interfaces
• /
• v.16 no.spc
• /
• pp.39-44
• /
• 2003

As one of many design variables, the role of dimension tolerances is to restrict the amount of size variation in a manufactured feature while ensuring functionality. In this study, a nonlinear integer model has been modeled to allocate the optimal tolerance to each individual feature at a minimum manufacturing cost. While a normal distribution determines statistically worst tolerances with its symmetrical property in many previous tolerance allocation studies, a asymmetrical distribution is more realistic because its mean is not always coincident with a process center. A nonlinear integer model is modeled to allocate the optimal tolerance to a feature based on a beta distribution at a minimum total cost. The total cost as a function of tolerances is defined by machining cost and quality loss. After the convexity of manufacturing cost is checked by the Hessian matrix, the model is solved by the Complex Method. Finally, a numerical example is presented demonstrating successful model implementation for a nonlinear design case.