• 제목/요약/키워드: Worst case

검색결과 794건 처리시간 0.034초

생사정리가 재조검사성적에 미치는 영향 (Relationship winding test with silk finishing)

  • 최병희;유기성
    • 한국잠사곤충학회지
    • /
    • 제5권
    • /
    • pp.47-51
    • /
    • 1965
  • 생사정리방법이 재소검사성적에 미치는 영향을 조사하기 위하여 본 실험을 하였으며 얻어진 결과는 다음과 같다. 1. 단이 배이보다 절단경향이 적었다. 2. 타래의 표부보다 그 이부검사성적이 약배 나뻤다. 3. 시료 채취부위별 검사결과는 괄각부의 단절이 가장 많고 표부 내부의 순위로 되었다. 4. 검사시간이 경과함에 따라 단절이 감소하는 경향이었다. 5. 생사정리 부주의로 인한 재조절단발생률은 단이보다 배이에서 더욱 크게 나타난다. 6. 생사정리상 적합한 수분률은 10∼11%이다.

  • PDF

대나무를 이용한 각종 화학펄프 제조에 관한 연구 (Studies on the production of Various Chemical Pulps from Bamboo)

  • 강진하;박성종
    • 펄프종이기술
    • /
    • 제32권3호
    • /
    • pp.57-64
    • /
    • 2000
  • This study was carried out to acquire basic data necessary for the use of non-wood pulp. It investigated various chemical pulping methods using bamboo to achieve higher yield lower kappa no. and then the physical properties of various pulps were tested. The results of this study were as follows. When various chemical pulps(Soda, Soda-AQ, Soda-AQ-H2O2, Soda-urea, AS, AS-AQ, Kraft) were produced with bamboo. the pulps with the higher yield and lower kappa no. were AS-AQ and Kraft. In the case of the breaking length Soda pulps(5.77∼6.46 km) showed the greatest and Soda-urea pulps(3.81∼4.522km) showed the lower value. Similarly for the burst index Soda pulps (3.28∼3.50 kPa$.$m2/g) were the best and Soda-urea pulps(2.29∼2.39 kPa$.$m2/g) were worst. On the other hand the tearing indexes of AS-AQ pulps(73.6∼89.7mN$.$m2/g) showed the tendency which was higher then those of other pulps.

  • PDF

Erythrosine과 수종(數種) 젤라틴간의 상호작용(相互作用) (Interaction of Erythrosine with Several Pharmaceutical Gelatins)

  • 민신홍;권종원;정엽
    • Journal of Pharmaceutical Investigation
    • /
    • 제14권4호
    • /
    • pp.183-188
    • /
    • 1984
  • The interactions of FD & C Red No.3 (erythrosine) in 1 or 2% concentrations with various types of pharmaceutical gelatins were studied. In visible region spectroscopy type A gelatin showed 6 nm bathochromic shift in ${\lambda}_{max}$ of erythrosine, but no shifts were observed in other gelatins. Various results were obtained in the decrease of absorbance from 0.06 to 0.25. In dissolution study, the gelatin that showed the greatest spectral change exhibited the worst profile. From above results, it is concluded that erythrosine interacted to the greatest extent with type A gelatin and in the case of type B gelatin the degree of the interaction in different according to their specifications.

  • PDF

Enhancement of VECTOR Method by Adapting OCTAVE for Risk Analysis in Legacy System Migration

  • Hakemi, Aida;Jeong, Seung Ryul;Ghani, Imran;Sanaei, Mojtaba Ghanaatpisheh
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제8권6호
    • /
    • pp.2118-2138
    • /
    • 2014
  • Risks are involved in all phases of the software life cycle, and due to these risks, software can face various problems that can cause different negative outcomes and sometimes, in extreme cases, the failure of the software. Most of these risks lie in the legacy software migration process. These risks can create many problems, and in the worst case they can lead to the failure of the migration project. This paper explores different types of risk analysis methods such as CRAMM, CORAS, OCTAVE and VECTOR. After comparing these methods, the two suitable methods were chosen, namely, OCTAVE and VECTOR. Based on the use of these two methods, the project suggests an enhanced EOV method for risk analysis in the migration of legacy software.

4-위상 신호 방식에 알맞은 직접수열 부호분할 다중접속 서명수열 (DS/CDMA Signature Sequences for 4-phase Signaling)

  • 박소령;송익호
    • 한국통신학회논문지
    • /
    • 제30권5C호
    • /
    • pp.313-319
    • /
    • 2005
  • 이 논문에서는, 상관 (correlation) 성질이 비동기 (asynchronous) 4-위상 신호 방식에 알맞은 다상 (polyphase)수열 집합을 제안한다. 제안한 수열과 이진 의사잡음 (pseudo-noise: PN) 수열을 서명수열로 (signature sequence)쓸 때 직접수열 부호분할 다중접속 (direct sequence code division multiple access: DS/CDMA) 시스템의 성능을 견주어 본다. 최대 절대 상관값으로 (maximum magnitude of correlations) 분석한 최악 성능과 모의 실험으로 얻은 평균 비트오류율 성능 모두에서 제안한 수열을 쓰면 이진 의사잡음 수열을 쓸 때보다 시스템 성능이 더 나음을 보인다.

고성능 내장형 마이크로프로세서를 위한 SIMD-DSP/FPU의 설계 (Design of SIMD-DSP/PPU for a High-Performance Embedded Microprocessor)

  • 정우경;홍인표;이용주;이용석
    • 한국통신학회논문지
    • /
    • 제27권4C호
    • /
    • pp.388-397
    • /
    • 2002
  • 본 논문에서는 고성능 내장형 프로세서에서 멀티미디어 성능을 효과적으로 향상시킬 수 있는 SIMD-DSP/FPU를 설계하였다. 하드웨어 증가를 최소화하기 위해 기존 연산기의 분할 구조를 제시하였고 면적이 작은 연산기를 제안하였다. 연산기의 공유를 통해 FPU의 하드웨어 면적을 크게 줄였다. 제안된 구조는 HDL로 모델링되고 0.35 $\mu\textrm{m}$ 표준 셀 공정으로 합성되어, 약 십만 등가 게이트의 면적을 갖는 것으로 보고되었으며 최악조건에서 코어 주파수인 50MHz 이상으로 동작하는 것이 예상된다.

Limited Feedback Designs for Two-Way Relaying Systems with Physical Network Coding

  • Kim, Young-Tae;Lee, Kwangwon;Jeon, Youngil;Lee, Inkyu
    • Journal of Communications and Networks
    • /
    • 제17권5호
    • /
    • pp.463-472
    • /
    • 2015
  • This paper considers a limited feedback system for two-way wireless relaying channels with physical network coding (PNC). For full feedback systems, the optimal structure with the PNC has already been studied where a modulo operation is employed. In this case, phase and power of two end node channels are adjusted to maximize the minimum distance. Based on this result, we design new quantization methods for the phase and the power in the limited feedback system. By investigating the minimum distance of the received constellation, we present a code-book design to maximize the worst minimum distance. Especially, for quantization of the power for 16-QAM, a new power quantization scheme is proposed to maximize the performance. Also, utilizing the characteristics of the minimum distance observed in our codebook design, we present a power allocation method which does not require any feedback information. Simulation results confirm that our proposed scheme outperforms conventional systems with reduced complexity.

부정 내적 공간에서의 준최적 분산 $H^{\infty}$ 상태 추정기 설계 (Design of Decentralized $H^{\infty}$ State Estimator in Indefinite Inner Product Spaces)

  • 나원상;진승희;박진배;윤태성;최윤호
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1998년도 하계학술대회 논문집 B
    • /
    • pp.436-439
    • /
    • 1998
  • In this paper, we propose a centralized $H^{\infty}$ state estimator for the multi state estimation problem using the result suboptimal $H^{\infty}$ filter is a special form of Ka filter whose state equations are defined in md inner product spaces. Con- ventional decentr filters are based on Kalman filter assumes precesses and measurements noises are w Gaussian noise. Therefore, Kalman based decent filter design hasn't robust performance in situation. Simulation results show that decent $H^{\infty}$ filter has robust perfotmance in worst case sensor fault situation.

  • PDF

다중 이슈 프로세서를 위한 최악 실행시간 분석 기법 (A Worst Case Execution Timing Analysis Technique for Multiple-Issue Processors)

  • 임성수;한정희;김지홍;민상렬
    • 한국정보과학회논문지:시스템및이론
    • /
    • 제27권10호
    • /
    • pp.848-860
    • /
    • 2000
  • 본 논문에서는 한 번에 여러 개의 명령어를 이슈할 수 있는 다중 이슈 프로세서(in-order, multiple-issue processors)에 대해 최악 실행시간을 분석하는 기법을 제시한다. 명령어들의 이슈 형태를 분석하기 위해서 명령어들 사이의 의존성 간계를 표현하는 IDG(Instruction Dependence Graph)라고 하는 자료구조를 사용한다. 이 자료구조로부터 각 명령어들의 이슈간 거리 범위를 구하고, 프로그램의 계층적인 분석 과정에서 점차로 더 정확한 이슈간 거리 범위로 갱신한다. 프로그램의 최악 실행시간은 최종적으로 얻어진 프로그램 전체에 대한 IDG를 분석하여 얻은 명령어들의 이슈간 거리 범위로부터 계산한다. 제안하는 기법을 구현한 시간 분석기를 사용하여 실험한 결과, 논문에서 사용한 다중 이슈 프로세서 모델에 대해서 정확하게 다중 이슈 형태를 분석할 수 있었다.

  • PDF

환경에너지시설의 화재 및 피난 안전성 평가에 관한 연구 (A Study on Assessment of Fire and Evacuation Safety in Environmental Energy Facilities)

  • 전용한;한상필
    • 대한안전경영과학회지
    • /
    • 제21권4호
    • /
    • pp.39-44
    • /
    • 2019
  • In this study, fire and evacuation safety of environmental energy facilities using fire and evacuation simulation was examined as part of performance-oriented design. The worst-case fire scenarios in which fire-fighting facilities such as sprinkler fire extinguishing and smoke control systems are not working, and the FDS analyzes the visibility, temperature distribution, and carbon monoxide concentration distribution through FDS. The safety was examined. As a result, it was proved that evacuation could limit the visibility, temperature, and carbon monoxide concentration in a smooth range, based on the safety standards set by relevant laws. In other words, it was possible to verify the safety of fire and evacuation for environmental energy facilities where a large amount of combustibles and fires coexist.