• Title/Summary/Keyword: Worm Model

Search Result 90, Processing Time 0.03 seconds

Modeling the Spread of Internet Worms on High-speed Networks (고성능 네트워크에서 인터넷 웜 확산 모델링)

  • Shin Weon
    • The KIPS Transactions:PartC
    • /
    • v.12C no.6 s.102
    • /
    • pp.839-846
    • /
    • 2005
  • Recently broadband convergence network technology is emerging as an integrated network of telecommunication, broadcasting and Internet. But there are various threats as side effects against the growth of information technology, and malicious codes such af Internet worms may bring about confusions to upset a national backbone network. In this paper, we survey the traditional spreading models and propose a new worm spreading model on Internet environment. We also analyze the spreading effects due to tile spread period and the response period of Internet worms. The proposed model leads to a better prediction of the scale and speed of worm spreading. It can be applied to high-speed network such as broadband convergence network.

A Piezoelectric Lens Actuator for Mobile Information Devices (모바일 기기용 렌즈 구동 압전형 액츄에이터 개발)

  • Lee, Hun-Tae;Lee, Seung-Yop;Park, Young-Phil
    • Proceedings of the Korean Society for Noise and Vibration Engineering Conference
    • /
    • 2005.11a
    • /
    • pp.744-749
    • /
    • 2005
  • In this paper, a lens actuator for mobile devices is proposed using stack type piezoelectric materials. In general, the deformation of PZT actuators is not enough for lens motion when the allowed voltage is applied. The small stroke problem can be solved by accumulating a lot of small displacements in high frequency. In this paper, a new inch-worm type model for focusing actuator is suggested based on the interaction of inertial and frictional forces. Theoretical analysis and simulation using ANSYS are performed to verify the feasibility of the inch-worm PZT actuator model. Various types of clamps are considered to determine the effect of frictional force on the motion, and appropriate clamp-actuator models are proposed. The proposed models are experimentally verified and the experimental results show high correspondence with theoretical and simulated values. The inch-worm type focusing actuator enable a large stroke with 7.79 mm/sec with 10kHz and 10V.

  • PDF

Design and Implementation of an E-mail Worm-Virus Filtering System on MS Windows (MS 윈도우즈에서 E-메일 웜-바이러스 차단 시스템의 설계 및 구현)

  • Choi Jong-Cheon;Chang Hye-Young;Cho Seong-Je
    • Journal of the Korea Institute of Information Security & Cryptology
    • /
    • v.15 no.6
    • /
    • pp.37-47
    • /
    • 2005
  • Recently, the malicious e-mail worm-viruses have been widely spreaded over the Internet. If the recipient opens the e-mail attachment or an e-mail itself that contains the worm-virus, the worm-virus can be activated and then cause a tremendous damage to the system by propagating itself to everyone on the mailing list in the user's e-mail package. In this paper, we have designed and implemented two methods blocking e-mail worm-viruses. In the fist method, each e-mail is transmitted only by sender activity such as the click of button on a mail client application. In the second one, we insert the two modules into the sender side, where the one module transforms a recipient's address depending on a predefined rule only in time of pushing button and the other converts the address reversely with the former module whenever an e-mail is sent. The lader method also supports a polymorphism model in order to cope with the new types of e-mail worm-virus attacks. The two methods are designed not to work for the e-mail viruses. There is no additional fraction on the receiver's side of the e-mail system. Experimental results show that the proposed methods can screen the e-mail worm-viruses efficiently with a low overhead.

A study for improving database recovery ratio of Disaster Recovery System in financial industry (금융권 재해복구 시스템의 DB 데이터 복구율 향상을 위한 연구)

  • Kim, Jin-Ho;Seo, Dong-Kyun;Lee, Kyung-Ho
    • Journal of the Korea Institute of Information Security & Cryptology
    • /
    • v.24 no.4
    • /
    • pp.655-667
    • /
    • 2014
  • A disaster is the time-excess case that computerized service can tolerate a failure and financial industry is being set up the disaster recovery system based on the disaster recovery plan and the business continuity plan for preparing these disasters. However, existing system can not guarantee the business continuity when it comes to cyber terror. This paper analyzes the building type and building technology of disaster recovery system for the financial fields. Also this paper explain the type of data backup using online redo log and type of archive log backup using WORM storage. And this paper proposes the model of improved data recovery combining above two types. Lastly this paper confirm the effectiveness and reliability for proposal rocovery model through the implementation of the test environment.

Antioxidant Activity of Ethyl acetate Fraction of Berberis koreana Palibin in Caenorhabditis elegans (매자나무 Ethyl acetate 분획물의 예쁜 꼬마선충 내의 항산화 효과)

  • Ji Woo Choi;Jun Hyeong Kim;Jae Hyeok Lee;Dae Keun Kim
    • Korean Journal of Pharmacognosy
    • /
    • v.54 no.2
    • /
    • pp.66-71
    • /
    • 2023
  • Ethyl acetate (EA) soluble fraction of the Berberis amurensis (Berberidaceae) methanol extract showed the potent DPPH radical scavenging activity through Caenorhabditis elegans model system. The EA fraction was measured for the activity of superoxide dismutase (SOD), catalase, and oxidative stress tolerance by using C. elegans along with reactive oxygen species (ROS) level. In addition, SOD-3 expression was conducted using a transgenic strain (CF1553) to confirm that the regulation of the stress response gene is responsible for the increased stress tolerance of C. elegans treated by the EA fraction. As a result, the EA soluble fraction of B. amurensis increased SOD and catalase activity, and decreased ROS accumulation in a dose-dependent manner. Furthermore, the EA fraction-treated CF1553 worm showed higher SOD-3::GFP intensity than the control worm.

Epidemiological Studies on Ascaris lumbricoides Reinfection in Rural Communities in Korea 1. The Relationship between Prevalence and Monthly Reinfection Rate (한국 농촌지역의 회충재감염에 대한 역학적 조사연구 I. 현재감염률과 월재감염률의 상관관계)

  • 채종일
    • Parasites, Hosts and Diseases
    • /
    • v.21 no.2
    • /
    • pp.135-141
    • /
    • 1983
  • The epidemiological relationship between the current prevalence and monthly reinfection rate of Ascaris lumbricoides was observed in rural communities in Korea by means of blanket mass chemotherapy and worm collection for measurement of the prevalence and reinfection rates. During the period from 1975 to 1980, a total of 4,466 inhabitants in 10 different localities were treated with 10 mg/kg of pyrantel pamoate and 2 days' whole stools were collected from 2,547 inhabitants. The stools were examined for the presence of expelled adult and/or young worms, which represent the prevalence and reinfection rates for past 2 months respectively. After then, the obtained rates were correlated each other applying the timeprevalence curve proposed by Hayashi. It was observed that the prevalence (overall worm positive rate) and worm burden per individual ranged by areas from 13. 6 to 72. 3% and 1.4~10. 2 respectively. The calculated monthly reinfection rates (X) (from young worm positive rates) according to areas were in the range, 2.6~16.2%, and clearly correlated with the current prevalence (Y) under the equation, $Y=1-(l-X)^{7.2}$ where 7.2 is time in month. The equation means that after one time mass chemotherapy the period needed to attain equilibrium of prevalence again would be about 7~8 months. And it is inferred that the majority of reinfected worms in human host turn over every 7~8 months.

  • PDF

Image segmentation using fuzzy worm searching and adaptive MIN-MAX clustering based on genetic algorithm (유전 알고리즘에 기반한 퍼지 벌레 검색과 자율 적응 최소-최대 군집화를 이용한 영상 영역화)

  • Ha, Seong-Wook;Kang, Dae-Seong;Kim, Dai-Jin
    • Journal of the Korean Institute of Telematics and Electronics S
    • /
    • v.35S no.12
    • /
    • pp.109-120
    • /
    • 1998
  • An image segmentation approach based on the fuzzy worm searching and MIN-MAX clustering algorithm is proposed in this paper. This algorithm deals with fuzzy worm value and min-max node at a gross scene level, which investigates the edge information including fuzzy worm action and spatial relationship of the pixels as the parameters of its objective function. But the conventional segmentation methods for edge extraction generally need the mask information for the algebraic model, and take long run times at mask operation, whereas the proposed algorithm has single operation according to active searching of fuzzy worms. In addition, we also propose both genetic fuzzy worm searching and genetic min-max clustering using genetic algorithm to complete clustering and fuzzy searching on grey-histogram of image for the optimum solution, which can automatically determine the size of ranges and has both strong robust and speedy calculation. The simulation results showed that the proposed algorithm adaptively divided the quantized images in histogram region and performed single searching methods, significantly alleviating the increase of the computational load and the memory requirements.

  • PDF

A Probabilistic Model of Damage Propagation based on the Markov Process (마코프 프로세스에 기반한 확률적 피해 파급 모델)

  • Kim Young-Gab;Baek Young-Kyo;In Hoh-Peter;Baik Doo-Kwon
    • Journal of KIISE:Computer Systems and Theory
    • /
    • v.33 no.8
    • /
    • pp.524-535
    • /
    • 2006
  • With rapid development of Internet technology, business management in an organization or an enterprise depends on Internet-based technology for the most part. Furthermore, as dependency and cohesiveness of network in the communication facilities are increasing, cyber attacks have been increased against vulnerable resource in the information system. Hence, to protect private information and computer resource, research for damage propagation is required in this situation. However the proposed traditional models present just mechanism for risk management, or are able to be applied to the specified threats such as virus or worm. Therefore, we propose the probabilistic model of damage propagation based on the Markov process, which can be applied to diverse threats in the information systems. Using the proposed model in this paper, we can predict the occurrence probability and occurrence frequency for each threats in the entire system.

Development of a Functional External Fixator System for Bone Deformity near Joints in Legs (족관절 근위부 골교정용 기능성 체외고정장치 개발)

  • Lee Ho-Jung;Chun Keyoung-Jin
    • Journal of the Korean Society for Precision Engineering
    • /
    • v.22 no.3 s.168
    • /
    • pp.162-169
    • /
    • 2005
  • The functional external fixator system fur bone deformity near joints in legs using the worm gear was developed for curing the difference angles in fracture bone and the lengthening bar for curing the difference length in fracture bone. Both experiments and FE analysis were performed to compare the elastic stiffness in several loading modes and to improve the functional external fixator system for the bone deformity. The FE model using the compressive and bending FE analysis was applied to the FE analysis due to the angle differences. The results show that the compressive stiffness value in experiment was 175.43N/mm; the bending stiffness value in experiment was 259.74N/mm; compressive stiffness value in FEM was 188.67N/mm; bending stiffness value in FEA was 285.71N/mm. The errors between experiments and FEA were less than 10%. The maximum stress (157MPa) to the angle of clamp was lower than the yield stress (176.4MPa) of SUS316L. The stiffnesses in both axial compressive and bending of the new fixator are about 2 times higher than other products except EBI (2003).

Development of a Functional External Fixator System for Bone Deformity near Joints in Legs (족관절 근위부 골교정용 기능성 체외고정장치 개발)

  • 전경진;이호중
    • Proceedings of the Korean Society of Precision Engineering Conference
    • /
    • 2004.10a
    • /
    • pp.1248-1251
    • /
    • 2004
  • The functional external fixator system for bone deformity near joints in legs using the worm gear was developed for curing the difference angles in fracture bone and the lengthening bar for curing the difference length in fracture bone. Both experiments and FE analysis were performed to compare the elastic stiffness in several loading modes and to improve the functional external fixator system for bone deformity near joints in legs. The FE model using the compressive and bending FE analysis was applied the FE analysis due to the angle differences. The results show that the compressive stiffness value in experiment was 175.43N/mm, the bending stiffness value in experiment was 259.74N/mm, compressive stiffness value in FEM was 188.67N/mm, bending stiffness value in FEA was 285.71N/mm. The errors between experiments and FEA were less than 10%. The maximum stress (157MPa) to the angle of clamp was lower than the yield stress (176.4MPa) of SUS316L. The stiffnesses in both axial compressive and bending of the new fixator are about 2 times higher than other products except EBI (2003).

  • PDF