• Safety and Health at Work
• /
• v.14 no.3
• /
• pp.287-294
• /
• 2023

Background: Fruit and vegetable market is an abundant source of bioaerosols. Exposure to organic and inorganic waste and long-term inhalation of bioaerosols during working hours leads to chronic respiratory symptoms. Hence, this study aimed to determine the prevalence of chronic respiratory symptoms and related factors among fruit and vegetable workers compared with the control group in Addis Ababa, Ethiopia. Methods and materials: A comparative cross-sectional study was conducted from 2020 to 2021. Data were entered in EpiData 3.1 and exported to Statistical Package for the Social Sciences (SPSS) version 25. Logistic regressions were computed to depict the data and related factors. The culture method was done to count and compare bacterial and fungal concentrations between fruit and vegetable workers and office workers. Results: In this study, the prevalence of chronic respiratory symptoms (PR = 2.87, 95% confidence interval [CI]: 1.772-4.66) was significantly higher among fruit and vegetable workers (46.7%) than controls (23.4%). Sex (adjusted odds ratio [AOR] = 2.11, 95% CI = 1.12-3.98), educational status (AOR = 1.34, 95% CI = 0.78-2.32), working hours per day (AOR = 3.91, 95% CI = 1.586-9.65), and working department (AOR = 3.20, 95% CI = 0.90-11.40) were associated with chronic respiratory symptoms. Bacterial and fungal concentrations were significantly higher in the air of the vegetable market (276 colony-forming unit) than the air in the workplace of controls (7 colony-forming unit). Conclusion: The fruit and vegetable market workers (greengrocers) had a higher prevalence of chronic respiratory symptoms relative to office workers. Respiratory protective devices should be given to deliver preventive measures.

• Safety and Health at Work
• /
• v.14 no.4
• /
• pp.398-405
• /
• 2023

Background: Starting from March 2020 until December 2021, different phases of Covid-19 pandemic have been identified in Italy, with several containing/lifting measures progressively enforced by the National government. In the present study, we investigate the change in occupational risk during the subsequent pandemic phases and we propose an estimate of the incidence of the cases by economic sector, based on the analysis of insurance claims for compensation for Covid-19. Methods: Covid-19 epidemiological data available for the general population and injury claims of workers covered by the Italian public insurance system in 2020-2021 were analyzed. Monthly Incidence Rate of Covid-19 compensation claims per 100,000 workers (MIRw) was calculated by the economic sector and compared with the same indicator for general population in different pandemic periods. Results: The distribution of Covid-19 MIRw by sector significantly changed during the pandemic related to both the strength of different waves and the mitigation/lifting strategies enforced. The level of occupational fraction was very high at the beginning phase of the pandemic, decreasing to 5% at the end of 2021. Healthcare and related services were continuously hit but the incidence was significantly decreasing in 2021 in all sectors, except for postal and courier activities in transportation and storage enterprises. Conclusion: The analysis of compensation claim data allowed to identify time trends for infection risk in different working sectors. The claim rates were highest for human health and social work activities but the distribution of risk among sectors was clearly influenced by the different stages of the pandemic.

• Safety and Health at Work
• /
• v.15 no.3
• /
• pp.255-262
• /
• 2024

Background: Nearly half of patients diagnosed with cancer are in the middle of their traditional working age. The return to work after cancer entails challenges because of the cancer or treatments and associated with the workplace. The study aimed at providing more insight into the occupational outcomes encountered by workers with cancer and to provide interventions, programs, and practices to support their return to work. Methods: A scoping review was conducted using the Arksey and O'Malley framework and the Preferred Reporting Items for Systematic Reviews and Meta-Analyses for scoping review guidelines. Relevant studies were systematically searched in PubMed/MEDLINE, SCOPUS and Grey literature from 01 January 2000 to 22 February 2024. Results: The literature search generated 3,017 articles; 53 studies were considered eligible for this review. Most of the studies were longitudinal and conducted in Europe. Three macroarea were identified: studies on the impact of cancer on workers in terms of sick leave, employment, return to work, etc.; studies reporting wider issues that may affect workers, such as the compatibility of treatment and work and employment; studies reporting interventions or policies aiming to promote the return to work. Conclusion: There is a lack in the literature in defining multidisciplinary interventions combining physical, psycho-behavioural, educational, and vocational components that could increase the return-to-work rates. Future studies should focus on interdisciplinary return to work efforts with multiple stakeholders with the involvement of an interdisciplinary teamwork (healthcare workers and employers) to combine these multidisciplinary interventions at the beginning of sick leave period.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.8
• /
• pp.342-347
• /
• 2020

Recently, as the collaborative robot has been introduced into the domestic industrial robot market, it is installed mainly in the manufacturing industry. Collaborative robots are subject to the safety regulations of industrial robots by Article 93 of the Safety Inspection of the Industrial Safety and Health Act. The sites where collaborative robots are to be installed must perform risk assessments for robots-humans, work environments, and work methods and reduce the risks according to ISO 10218-2 and ISO 12100. On the other hand, because it is early in the introduction of collaborative robots, new risks for collaborative robots have not been issued, and risk assessments are unfamiliar and difficult to apply in the workplace. The risk assessment of collaborative robots aims to identify and reduce the risk of a high probability of occurrence by focusing on the abnormal behavior of humans, human errors, equipment defects, and interlock functions. In this study, a risk assessment was applied to a domestic automobile parts production plant, and improvement measures were drawn. This risk assessment is expected to be useful for improving the safety of small businesses by continuously discovering risk assessment examples of collaborative robots.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.26 no.2
• /
• pp.147-158
• /
• 2016

Objectives: The objective of this study was to evaluate the assessment of exposure to welding fume and heavy metals among construction welders. Methods: Activity-specific personal air samplings(n=206) were carried out at construction sites of three apartment, two office buildings, and two plant buildings using PVC(poly vinyl chloride) filters with personal air samplers. The concentration of fumes and heavy metals were evaluated for five different types of construction welding jobs: general building pipefitter, chemical plant pipefitter, boiler maker, ironworker, metal finishing welder. Results: The concentration of welding fumes was highest among general building pipefitters($4.753mg/m^3$) followed by ironworkers($3.765mg/m^3$), boilermakers($1.384mg/m^3$), metal finishing welders($0.783mg/m^3$), chemical pipefitters($0.710mg/m^3$). Among the different types of welding methods, the concentration of welding fumes was highest with the $CO_2$ welding method($2.08mg/m^3$) followed by SMAW(shield metal arc welding, $1.54mg/m^3$) and TIG(tungsten inert gas, $0.70mg/m^3$). Among the different types of workplace, the concentration of welding fumes was highest in underground workplaces($1.97mg/m^3$) followed by outdoor($0.93mg/m^3$) and indoor(wall opening as $0.87mg/m^3$). Specifically comparing the workplaces of general building welders, the concentration of welding fumes was highest in underground workplaces($7.75mg/m^3$) followed by indoor(wall opening as $2.15mg/m^3$). Conclusions: It was found that construction welders experience a risk of expose to welding hazards at a level exceeding the exposure limits. In particular, for high-risk welding jobs such as general building pipefitters and ironworkers, underground welding work and $CO_2$ welding operations require special occupational health management regarding the use of air supply and exhaust equipment and special safety and health education and fume mask are necessary. In addition, there is a need to establish construction work monitoring systems, health planning and management practices.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.9
• /
• pp.5865-5874
• /
• 2015

Large accidents such as the recent to the ringing years Pat disaster they become apparent in the human resources, the cause of the accident is also the site corresponding manual member and management blind spots, are aggregated such as safety frigidity. Big problem is safe frigidity of workplace than accident. It is also a reason to introduce a punitive damages system in offices and business owners that caused the direct safety accident from this point. Punitive damages agent and compensation for mental damage, by so as to compensate for far more money than the actual damages, which carry a punishment nature to prevent a situation where the tort is repeated. Currently, it admits "compensatory damages system" corresponding to the damage that gave basically damage by law, but are subject to criticism that not properly relief victims. However, there is a need for the introduction of punitive damages system for safety accident prevention. This is, this system, while to prevent the recurrence of the reverse safety accident, strive to investment and management for safety, healthy companies can operate in the direction of giving more opportunities, national companies that are ignoring and threatening the safety, but to leave because the match also to social justice.

• The Journal of the Korea Contents Association
• /
• v.18 no.11
• /
• pp.540-549
• /
• 2018

This study was conducted on 238 dental hygienists working in Daegu and Gyeongbuk area. In order to understand the status of harmful transmission of dental materials by type of work, we compared the differences in exposure time and work environment characteristics of hospital types and investigated the difference in the degree of recognition of material safety data. The results of the study were as follows: In case of hospitals, the exposure time of dust generated from chemicals was the longest. Resin filling, contact with disinfectant. 37 workers (29.4%) and 14 workers (12.5%) answered that they perceive the question about whether they are aware of the material safety data sheet (MSDS) for dental materials. There were 18 hospital workers and 6 clinic workers who had experience reading MSDS before using dental materials. The respondents who answered that they provided the material safety data of the dental materials used had a 2.39 times MSDS in hospital workers. Therefore, by recognizing the health hazards of chemical substances in accordance with the characteristics of each type of hospital and continuing to conduct health and safety education, the work environment should be improved by establishing proper recognition of MSDS information. It suggests the necessity of a system that can strengthen the management of chemical information provision and guarantee the strategic approach and workers' right to know.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.31 no.1
• /
• pp.83-93
• /
• 2021

Objectives: 'Confined space' was only defined in the Safety and Health Regulations as a place where oxygen deficiency and hydrogen sulfide must be dealt with at the time of the initial enactment (1982). The danger of fire and explosion were added in 2003. We will compare and review the regulations related to confined space work under the current safety and health rules alongside regulations in other countries and prepare a plan to improve the system through enhanced clarity and execution. Methods: In a comparison of systems for the prevention of suffocation in confined spaces in major countries (Germany, United States, Japan) different concepts of the definition of confined spaces in different countries apparently due to differences in each country's legal implementation system, accident analysis methods, the status of safety and health implementation in workplaces, the precautions against actual confined space work, and the definition of confined spaces were found to be not much different between Korea and the other foreign countries. Results: In the case of Germany and the United States, a confined space is defined as a contextual concept rather than a place, so more careful attention is needed from operators or enclosed space managers as it is often necessary to judge the actual workplace. In the case of Korea and Japan, the interior of the place is mainly defined as a place, especially in the case of Japan, which concentrates on oxygen deficiency and hydrogen sulfide poisoning. Conclusions: For measures to improve regulations on the prevention of suffocation accidents in Korea, I would like to propose three major measures to improve the system in the rules on domestic industrial safety and health standards. It is necessary to prepare and provide a guide to ensure that the 18 types of confined spaces currently defined as confined spaces are clearly understood by field management supervisors or workers.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.4 no.1
• /
• pp.33-42
• /
• 1994

This study was carried out to assess worker exposure to vinyl chloride monomer (VCM) and to present control measures in the factories processing and producing polyvinyl chloride (PVC) resin. The conclusion remarks are as follows. Only two personal samples in the factory ("E") processing polyvinyl chloride resin were analysed to be 27.6 ppm and 12.6 ppm, respectively. But, these concentration exceed 1 ppm, Permissible Exposure Limits (PEL) of OSHA. So, worker's exposure to VCM at "E" factory should be reevaluated. In "A", "B" and "C" factory producing polyvinyl chloride resin, the average worker's exposures to VCM were 0.12 ppm, 0.86 ppm and 1.23 ppm, respectivery. Worker exposure to VCM at distillation and dry process was higer than other processes at "A" factory. The average exposure concentration of worker at polymerization process of "B" and "C" factory was 1.23 ppm, and 1.46 ppm respcetively. These concentration exceed 1 ppm, Permissible Exposure Limits of OSHA. Control room of "B" and "C" factory had 0.91 ppm and 0.65 ppm of worker's exposure concentration respectively. "A" factory was evaluated to be "acceptable", but "B" and "C" factories were evaluated to be "not acceptable", by the workplace exposure assessment program of AIHA. Process other than bagging and control room of "A" factory was evaluated to "not acceptable". Immediate correction measures for preventing workers from exposure to VCM should be performed in the factories or process that were evaluated to be "not acceptable". After these control measures are taken, worker exposure to VCM must be reevaluated through personal air monitoring. Control measures presented by this study are complete sealing of connecting pipe lines, flanging, packing, bolting and nutting. Periodic leak test for leak parts is also required. And positive pressure facility should be constructed at control room of "B" and "C" factory. Fresh air through cleaner such as HEPA filter should be supplied to control room. In addition to these control measures, periodic personal monitoring for evaluating worker exposure to VCM should be performed.

• Journal of the Korean Institute of Gas
• /
• v.25 no.3
• /
• pp.1-8
• /
• 2021

Among the flare systems that handle discharged substances from safety valves, the knockout drum was a key facility for safety, but the installation standards were not clear, so it was necessary to review the standards acceptable to the workplace and regulatory agencies. After investigating the domestic and foreign technical standards of knockout drums and the deficiencies of previous studies, research was first conducted on the degree of mass discharge, the installation location of the intermediate knockout drum, and the effect of changes in the composition of the discharged material. As a result of the study under the process simulation conditions, the gas-liquid separation of the knockout drum was completed in a small amount of less than 7,500kg/hr. However, when more than that was released, the gas-liquid separation effect was small even with the addition of an intermediate knockout drum. In addition, when the composition ratio of the material easily condensed was increased (molar fraction 10%), the gas-liquid separation effect of the knockout drum increased in the case of mass release. The gas-liquid separation effect was analyzed to be greater when the knockout drum was installed adjacent to the stack than the knockout drum was installed adjacent to the process equipment.