• 한국항해학회지
• /
• 제25권1호
• /
• pp.33-44
• /
• 2001

유조선은 보통 상선과는 다른 선체구조와 작업환경을 가지고 있다. 유조선에서 사고가 발생하면, 보통 상선에서는 선박과 화물에 제한되지만 유조선 사고에 따른 피해는 선박과 화물에 추가하여 유류유출에 따른 엄청난 제3자에 대한 배상책임을 져야한다. 따라서 유조선 운항에 따른 위험요소, 사전/사후손실통제, 해상 보험과 관련된 법규정을 이해하고, 기대하지 않은 사고가 발생할 때 피해를 최소화해야 할 것이다. 이러한 피해를 줄이기 위해서는 사전에 유류오염방지 시스템구축 및 유류오염 피해보상에 대한 준비를 해야만 한다. 이러한 준비에도 불구하고, 유조선 사고는 빈번히 발생하고 있다. 이에 본 논문에서는 유조선 운항에 따른 근본적이면서 전반적인 위험관리 방안에 대해 연구하였다.

• 수산해양교육연구
• /
• 제27권3호
• /
• pp.725-734
• /
• 2015

In contemporary society, many fishery industries face a serious problem of having an insufficient number of junior ship officers and engineers. Even though many fishery high schools in Korea made significant effort to produce many talented junior officers and engineers, but after graduation, the students are reluctant to get a job on the fishing vessels. Furthermore, Korean government also invested a large amount of money to train students for ocean-going and costal & near-ocean fishing vessels. However, despite the government's great effort on the training program and education, only a few students wish to work on the fishing vessels. In this article, the author tried to find answers for various questions such as what are the factors that the student prefer, where the student to want to get a job in fishery industries, and how student feel about working at fishing vessels. Furthermore, the author also analyzed the differences between high school student group and Korea Institute of Maritime and Fisheries Technology(KIMFT) student group about occupational orientation by utilizing SPSS statistical program. Additionally, the author surveyed the current onboard status of job position of the high school and KIMFT alumni. This study's results and data will be used for aiding further stimulation and advertisement of job position in fishing vessels and continued daily lives on board.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권3호
• /
• pp.737-748
• /
• 2014

Increasing amounts of ships exhaust gases emitted worldwide forced the International Maritime Organization to issue some restricted maritime legislation for reducing the adverse environmental impacts arising from such emissions. Consequently, ships emission reduction became one of the technical and economical challenges that facing the ships, operators. The present paper addresses the different strategies that can be used to reduce those emissions, especially nitrogen oxides and sulfur oxides. The strategies included: applying reduction technologies onboard, using of alternative fuels, and follows one of fuel saving strategies. Using of selective catalytic reduction and sea water scrubbing appeared as the best reduction technologies onboard ships. Moreover, among the various proposed alternative fuels, natural gas, in its liquid state; has the priority to be used instead of conventional fuels. Applying one of those strategies is the matter of ship type and working area. As a numerical example, the proposed methods were investigated at a high-speed craft operating in the Red Sea area between Egypt and the Kingdom of Saudi Arabia. The results obtained are very satisfactory from the point of view of environment and economic issues, and reflected the importance of applying those strategies.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권2호
• /
• pp.219-226
• /
• 2017

These days, the great part of design processes in the field of ship or offshore manufacturing are planned and implemented using the CAD system customized for shipbuilding companies. It means that all information for design and production could be extracted and reused at the other useful fields which need cost considerable time and efforts. The typical example is the field of welding material quantity evaluation which is demanded during the construction of ship or offshore structures. The proper evaluation of welding material to be used and the usage of them at the stage of schedule planning are mostly important to achieve the seamless process of production and costing in advance. This study is related to the calculation of welding length and needed welding material quantity at the stage of design completion utilizing the customized CAD system. The calculated welding material quantity would be classified according to welding posture, assembly stage, block, bevel and welding type so as to improve the accuracy of total cost evaluation. Moreover it is possible to predict the working time for welding operation and could be used efficiently for the cost management using the results of this research.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2018년도 추계학술발표대회
• /
• pp.346-349
• /
• 2018

In North-East asian countries, laver cultivation has been an important marine industry in coastal areas as well as fishery because laver (Porphyra) is nutrient-rich food and has been used in many Asian cuisines. Laver is characterized by high concentrations of fiber and minerals, a low fat content, and, in some cases, relatively high protein levels. In this paper we inplimented design of fully automatic laver harvesting, nowdays most peoples are used to collect a laver harvesting by human, it is very defficult working, due to wind, waves, and the weather conditions which is hard to stand on the ship and holding the seaweed nets it can be injurced human, this is the reason to we are developed automatic harvesting method, in this project we proposed automatic harvesting collect method which is operated without human. Mainly we design and developed automated ship, This ship is devided in to three parts frist part is supporting roller, second part is drum screener, thried part is lifting mechanism. Thise are operated with hydro pnumatic equimpment, this divice are control with micro controller. The system prototype has implemented and satisfied by the performance to realize the further level.

• 수산해양교육연구
• /
• 제14권1호
• /
• pp.79-94
• /
• 2002

In the Korean fishing boats, the abuse of Japanese term is intense. It becomes a reason of preventing the free communications between the crews who have been working for long time in the ship and crews who start new life in the ship as beginner. Also the former cannot feel and understand easily the contents of the textbook and manual which are explained with Korean or English terminology. It is reasonable that Japanese terms are no longer use in the vessel if possible. We searched and classified 170 or more Japanese terms which are used popularly in the fishing boats. So, we expect this paper is a basic research for the eradication of the Japanese terms in the Korean fishing boats.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.512-517
• /
• 2008

The brake system is very important part of the machine working. If the machine can't be stopped, it would be serious accident. It is the same as the ship. The mooring winch brake hold the ship in harbor. But sometimes it appeared the excessive stress and brake lining would be broken. So it is necessary to change the shape of brake system with improve the braking power. This study carried out research on optimum design like as moved the position of link pin or modified the thickness of brake band and lining.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 전기학술대회논문집
• /
• pp.1108-1112
• /
• 2005

Recently, the fuel charge is accounted for very high in the navigation cost. Therefore Shipowner is tried to find method for reducing oil consumption. ERCS(Energy Reduced Cooling System) is one of the method. The ERCS algorithm operates to decrease a power consumption of main sea water cooling pump through inverter control. We have developed ERCS controller with algorithm. The ERCS controller consists of CPU board, Digital I/O board, A/D board, D/A board and LCD/SW board. We tested with dummy signal to confirm the algorithm working correctly and achieved the good results. Before soon we will test under real condition in the ship and expect to get the result as forecasted.

• 한국항해항만학회지
• /
• 제35권2호
• /
• pp.137-147
• /
• 2011

The prime objective set for paper is to identify what are the women seafarers' problems and concerns regarding employment on cargo ships. From the cargo ship point of view, the question then is how to provide sufficient solutions for women seafarers in the male-dominated workplace of the ship through Corporate Social Responsibility(CSR) activities. The methodologies of study combine qualitative and quantitative research methods. The progress of research is to conduct a survey by asking a consistent set of key opinion leaders from the Republic of Korea. Moreover, to evaluate the elements of the result, the research explores the way in which we should consider giving priority to aspects of the problem. Finally, based on the terms of CSR, the author recommends measures to support the needs of women when they are employed onboard the world's merchant vessels.

• 해양환경안전학회지
• /
• 제29권4호
• /
• pp.363-371
• /
• 2023

한 척의 선박을 건조하기 위해서는 다양한 크기의 블록(block)들을 이동 및 탑재해야 한다. 이러한 과정에서 블록의 체결 방법 및 각 조선소 설비 특성에 맞는 다양한 기능에 부합하는 러그를 사용하고 있다. 블록 구조의 중량 및 형태에 따라서 러그의 크기와 형상이 다양하며, 샤클(shackle)이 체결되는 홀 주변에 부족한 강성을 보완하기 위하여 덧판(doubling pad)을 용접하여 구조를 보강한다. 리프팅(lifting) 조건별 러그의 설계를 하는 방법은 보 이론(beam theory)에 의한 수계산 방법과 유한요소해석 모델링을 이용한 구조해석을 수행하고 있다. 해석적 방법의 경우, 요소의 종류와 모델링 방법에 따라서 결과 차이가 발생하여 표준화된 평가법의 정립이 필요한 상황이다. 이러한 모호한 방법론 적용 시 블록의 이동 및 반전(turn-over) 과정 중에서 심각한 안전 문제를 유발할 가능성이 있다. 본 연구에서는 러그의 실제 탑재공정에 따른 구조 응답을 평가할 수 있는 모델링 조건, 평가법을 확정하고자 다양한 변수의 영향을 수치 구조해석을 통하여 비교 및 분석하였다. 러그 홀(hole) 주변 덧판부와 용접 비드(bead)를 표현한 모델링 기법이 가장 실제적인 거동 결과를 주고 있다. 실제 러그와 동일한 조건(용접부 비드만 주재료와 연결)의 모델링에 등가하중을 적용한 결과는 MPC 하중 적용 결과보다 낮은 최종강도를 나타낸다. 더불어 해석 시간 단축을 위해서 2차원 쉘(shell) 요소를 적용한 경우, 덧판 두께를 85% 수준으로 감소시켜서 안전사용하중을 예측할 수 있음을 확인하였다. 논문에서 검토한 다양한 변수의 영향들 결과는 러그 설계 및 안전사용하중 예측에 근거 자료로 활용될 것으로 기대된다.