• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.23 no.3
• /
• pp.223-230
• /
• 2011

The power cycle using ammonia-water mixture as a working fluid is a possible way to improve efficiency of the system of low-temperature source. In this work thermodynamic performance of the ammonia-water regenerative Rankine cycle with partial-boiling flow is analyzed for purpose of extracting maximum power from the source. Effects of the system parameters such as mass fraction of ammonia, turbine inlet pressure or ratio of partial-boiling flow on the system are parametrically investigated. Results show that the power output increases with the mass fraction of ammonia but has a maximum value with respect to the turbine inlet pressure, and is able to reach 22 kW per unit mass flow rate of source air at $180^{\circ}C$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.688-691
• /
• 1999

Light was of electric lamp was reflected by bulb reflector. In order to improve the efficiency of the electric lamp. it is inevitable that lamp, it is inevitable that improve the reflectance of bulb reflector. Important factors that affect the reflectance of bulb reflector is working pressure, distance between evaporation source to substrate, the situation of surface of glass. etch rate of glass, etc. In this paper. confirmed the effect of etching, working pressure etc. , and its effect for the reflectance of bulb reflector. Especially, concentration of HF in the etching solution and etching time is to be importnace for characteristic of bulb reflector.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.11a
• /
• pp.339-342
• /
• 1997

The optical properties of WO$_3$thin films deposited by RF magnetron reactive sputtering were studied. The substrate was an ITO(indium-tin-oxide) glass(100$\Omega$/ ). The optical properties are examined by different deposition conditions. RF power, substrate temperature, $O_2$concentraction. Ar flow rate, working pressure and thickness are 40~60W, 25~30$0^{\circ}C$, 10%, 54~72sccm, 5~20m7orr and 1200~2400$\AA$, respectively. All these films were colorless, light yellow and found to be amorphous in structure by X-ray diffraction analysis. When RF power, substrate temperature, $O_2$concentraction, Ar flow rate, working pressure and thickness are 40W, $25^{\circ}C$, 10%, 72sccm, 20mTorr and 2400$\AA$, respectively the values of transmittance of the WO$_3$thin films in visible region are about 80%.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1430-1432
• /
• 2003

Al doped Zinc Oxide(ZnO:Al) films, which is widely used as a transparent conductor in optoelectronic devices such as solar cell, plasma display panel, thermal heater, and other sensors, were prepared by using the capacitively coupled DC magnetron sputtering method. The influence of the substrate temperature, working gas pressure and deposition time on the electrical, optical and morphological properties were investigated experimentally. ZnO:Al films with the optimum growth conditions of working gas pressure and substrate temperature showed resistivity of $9.64{\times}10^{-4}\;{\Omega}$-cm and transmittance of 90.02% for a film 860nm thick in the wavelength range of the visible spectrum.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2007.11a
• /
• pp.136-137
• /
• 2007

Wear resistant TiAlN thin film has been widely deposited on the surface of cutting and forming tools by using Arc Ion Plating. TiAlN films are deposited by the processes designed by the Taguchi L18 experimental design. The L18 experimental design is applied to achieve surface properties and adhesion. The deposition parameters are working pressure, substrate temperature, bias voltage, arc power and pre-sputtering bias voltage and time. The most influential parameters on surface properties and adhesion are substrate bias voltage, working nitrogen pressure and arc power. The optimal coating processes are obtained for surface properties and adhesion.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.176-179
• /
• 2003

ITO films on PET substrate were prepared by DC magnetron sputtering method using powdery target with different deposition conditions. In addition, the electrical and optical properties were investigated. As the sputtering power and working pressure were higher, the resistvity of ITO films increased. The optical transmittance deteriorated with increasing sputtering power and thickness. As the working pressure increased, however, the optical transmittance improved at visible region of light. From these results, we could deposited ITO films with $8{\times}10^{-3}\;{\Omega}-cm$ of resistivity and 80% of transmittance at optimal conditions.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07a
• /
• pp.203-206
• /
• 2004

In this study the ITO thin films were prepared by using FTS(Facing Targets Sputtering) system. The electric characteristics, transmittance, surface roughness of ITO thin films were investigated as a function of varying input current and working gas pressure at room temperature. As a result, the ITO thin film was fabricated with resistivity $6{\times}10^{-4}[\Omega{\cdot}cm]$, carrier mobility $52.11[cm^2/V{\cdot}sec]$, carrier concentration $1.72{\times}10^{20}[cm^{-3}]$ of ITO thin film at working pressure 1mTorr and input current 0.6A.

• Journal of the Korean Vacuum Society
• /
• v.8 no.3A
• /
• pp.249-255
• /
• 1999

Deposition characteristics of Cu thin films using Ar carrier gas and $H_2$ processing gas at various working pressures and substrate temperatures were investigated. Also, effects of $H_2$ pretreatment using plasma at $200^{\circ}C$ of substrate temperature and 0.6 Torr of chamber pressure were stdied. Cu thin films were deposited on TiN/Si substrate at working pressure of 0.5~1.5 Torr, substrate temperatures of 140~$240^{\circ}C$ with (hface)Cu(tmvs). Substrates were pretreated by $H_2$ plasma, and Cu films deposited in situ using twofold shower head. The purity, electrical resistivity, thickness, surface morphology, optical properties of the deposited Cu films were measured b the AES, four point probe, stylus profiler, SEM,. and the uv-visible spectrophotometer. This study suggests that $H_2$ plasma is an effective method for enhancing deposition rate and for producing high quality copper thin films.

• KSTLE International Journal
• /
• v.6 no.2
• /
• pp.58-64
• /
• 2005

An OEM driven working group started in January 2004 to elaborate the philosophies, concepts and test procedures for testing piston ring and cylinder liner materials as well as engine oils outside the engine using the $SRV^{(R)}$ test equipment. The different $SRV^{(R)}$ test philosophies in use by OEMs are compiled. The working group focuses on a.) ASTM sequence VIB (Fuel economy by aging oils), b.) friction and wear in the top dead region under mixed/boundary lubrication, c.) extreme pressure load under mixed/boundary lubrication and d.) hydrodynamic friction. Tribological test result and precision data are presented.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2005.09a
• /
• pp.89-92
• /
• 2005

The AIN/AI thin films were prepared at various conditions, such as $N_2$ gas flow rate [$N_2(N_2+Ar)$] from 0.6 to 0.9, a substrate temperature ranging from room temperature to $300^{\circ}C$ and working pressure 1mTorr. We estimated crystallographic characteristics and c-axis preferred orientations of AIN/AI thin films as function of AI electrode surface roughness. The optimal processing conditions for AI electrode were found at substrate temperature of $300^{\circ}C$ sputtering power of 100W and a working pressure of 2mTorr. In these conditions, we obtained the c-axis preferred orientation of $AIN/AI/SiO_2/Si$ thin film about 4 degree.