• 한국중재학회지:중재연구
• /
• 제14권2호
• /
• pp.73-106
• /
• 2004

The UNCITRAL Arbitration Working Group began its deliberations on the topic of interim measures of protection at its thirty-second session (Vienna, 21-30 March 2000), when the Working Group expressed general support for a legal regime governing enforcement of interim measures of protection ordered by the arbitral tribunal. Also the Working Group took a preliminary analysis of whether there was a need for a uniform rule on court-ordered interim measures of protection in support of arbitration. The Working Group agreed, at its thirty-third session (Vienna, 20 November-1 December 2000), that the proposed new article to the UNCITRAL Model Law on International Commercial Arbitration on enforcement of interim measures of protection (tentatively numbered article 17 bis) should include an obligation on courts to enforce interim measures if prescribed conditions were met. At its thirty-fourth session (New York, 21 May-1 Jun 2001), in addition to continuing its review of draft article 17 bis, the Working Group proceeded to consider a text revising article 17 of the UNCITRAL Model Law, which defined the scope of an arbitral tribunal's power to order interim measures and included an additional provision on the granting of interim measures on an ex parte basis. Discussions in relation to revised drafts of article 17 and 17 bis of the UNCITRAL Model Law have continued at the fortieth session ( New York, 23-27 February 2004). Article 17 of the UNCITRAL Model Law provides that the arbitral tribunal may order any party to take such interim measure of protection as the arbitral tribunal may consider necessary in respect to the subject matter of the dispute. However it may be noted that the article does not deal with enforcement of such measures.

• 건축역사연구
• /
• 제13권2호
• /
• pp.21-38
• /
• 2004

This study provides a descriptive and analytical account of major aspects of urban development and transformation of housing types of Italian Firenze from the 13th century to the 19th century. It is a typo-morphological depiction of urban spatial structure of the extraordinary city, Firenze, the center of Italian Renaissance. And this study has proceeded on the assumption that the evolving form of the urban structure and housing types cannot be understood without reference to the larger context of political, economic, and social life. Based on these backgrounds, the purpose of this study is threefold: to provide a comprehensive discussion of general characteristics of urban spatial structure of Firenze, and to explain the process of formation of working-class neighborhoods by constructing new city wall in later 13th century, and to discuss transformation of housing types of the working-class neighborhood with understanding the mechanism of existence of housing in the newly formed residential neighborhoods. The development of residential neighborhoods was pursued by 'planned' manner through forming square-shaped blocks, and characterized by the subdivision of larger properties into standardized building lots for the construction of houses. On the bases of documentary evidences, several ecclesiastical institutions are identified as the agents of a distinctive type of development. While the institutions did the major role for developing lands, the construction of houses was done by small scale construction agents with moderate amount of properties. The major housing type of working-class neighborhoods of Firenze has been the 'casa a schiera' characterized by the form of narrow front and long depth. The type was generalized by the newly formed middle and working-class of Firenze which grew their body very rapidly, Even though the type assumed very uniform in its fen there were many variations. And through passing time, the casa a schiera developed to be multi-family housing, and the level of variation became deepen. Eventually, transformation of housing type of Firenze was ended by appearance of the 'casa in linea', which was very similar to modern apartment in its spatial organization.

• Transactions on Electrical and Electronic Materials
• /
• 제18권2호
• /
• pp.93-96
• /
• 2017

The structural, electrical and optical properties of Ti thin films fabricated by dual magnetron sputtering were investigated under various film thicknesses. The fabricated Ti thin films exhibited uniform surfaces, crystallinity, various grain sizes, and with various film thicknesses. Also, the crystallinity and grain size of the Ti thin films increased with the increase of film thickness. The electrical properties of Ti thin films improved with the increase of film thickness. The results showed that the performance of TCO-less DSSC critically depended on the film thickness of the Ti working electrodes, due to the conductivity of Ti thin film. However, the maximum conversion efficiency of TCO-less DSSC was exhibited at the condition of 100 nm thickness due to the surface scattering of photons caused by the variation of grain size.

• 한국공작기계학회논문집
• /
• 제17권6호
• /
• pp.111-117
• /
• 2008

An automation process of filter unit is presented for the application of the assembling procedure and dry furnace work. By that automation procedure, it is expected to enhance working environment such as reducing laboring load, harmful gas, and burning scald. Furthermore, this automation process also minimizes via standardization of manufacturing process so that it may increase productivity and reliability. An automation process of filter unit is presented for the application of the assembling procedure and dry furnace work. Filter automation process also gives a good quality and productivity by simplifying to only one line from the complicated process such as filter cutting$\rightarrow$ adhering$\rightarrow$fabricating in a very small space. It is found that a new conceptual design of dry furnace shows the better quality like uniform heat distribution compared to the conventional design. It is also found that the present design gives a better working environment by adding cooling system.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 1995년도 춘계학술발표회 초록집
• /
• pp.223-229
• /
• 1995

Heat transfer phenomena during freezing process of the water in a vertical cylinder were experimentally studied. Purified water was inserted into the vertical cylinder Experiment was performed with two conditions ; the inlet temperature of the working fluid was maintained to be -1$0^{\circ}C$ and the direction of the working fluid was to be upward or downward. Both the mean temperature of the liquid and temperature difference of cylinder tube wall in the upward were lower than those in the downward. In addition, shape of ice layer in the upward was more uniform than that in the downward. Finally, time-varying total heat energy stored in the water in the upward was higher than that in the downward.

• Architectural research
• /
• 제2권1호
• /
• pp.41-46
• /
• 2000

The sawtooth skylight is an excellent daylighting concept for the uniform interior illuminance over large working areas. In computer simulation, it is difficult for an architect to get accurate daylight illuminances for the spaces where sawtooth apertures are applied. In this study, daylight prediction algorithms for sawtooth apertures are developed. The flux transfer method is applied for this study to predict daylight illuminances. The simplified equations from this study can be used effectively for preliminary prediction of daylight in sawtooth spaces.

• 한국분말재료학회지
• /
• 제19권4호
• /
• pp.317-321
• /
• 2012

In this study, Cu-5Ni-10Sn(wt%) spinodal alloy was manufactured by gas atomization spray forming, and the microstructural features and mechanical properties of Cu-5Ni-10Sn alloy have been investigated during homogenization, cold working and age-hardening. The spray formed Cu-5Ni-10Sn alloy consisted of an equiaxed microstructure with a mixture of solid solution ${\alpha}$-(CuNiSn) grains and lamellar-structure grains. Homogenization at $800^{\circ}C$ and subsequent rapid quenching formed a uniform solid solution ${\alpha}$-(CuNiSn) phase. Direct aging at $350^{\circ}C$ from the homogenized Cu-5Ni-10Sn alloy promoted the precipitation of finely distributed ${\gamma}$' or ${\gamma}-(Cu,Ni)_3Sn$ phase throughout the matrix, resulting in a significant increase in microhardness and tensile strength. Cold working prior to aging was effective in strengthening Cu-5Ni-10Sn alloy, which gave rise to a maximum tensile strength of 1165 MPa. Subsequent aging treatment slightly reduced the tensile strength to 1000-1100 MPa due to annealing effects.

• 한국의류학회지
• /
• 제29권3_4호
• /
• pp.462-469
• /
• 2005

This study was inquiry into wearing condition and satisfaction of Saenghwal Hanbok uniform for Korean restaurant's employees. For this Purpose to be fulfilled survey was carried out to the managers and employees who are working in Korean traditional restaurants located in Seoul, and the reality of wearing Saenghwal Hanbok uniforms and the employees's satisfaction were considered. It taken into consideration when designing Hanbok uniforms for Korean traditional restaurants. The analysis was executed involving Simple Analysis, Correlation Analysis, Independent Samples T-test, Paired Comparison, ANOVA, and Duncun Test using SPSS. The report shows that buyers get two pieces style of skirt ($74\%$) and they are buying from Hanbok shops ($58\%$), or from uniform shops ($21\%$). It is almost impossible to see that employees' opinion is reflected in the uniform design since the decisions are made by either Senior manager or General Manager. Based on the result of this survey, followings should be taken into consideration when designing Hanbok uniforms for Korean traditional restaurants. Firstly, a design should reflect a sphere and a radiuses of action throughout a grasp of the type of restaurant, such as the type of sitting and whether there are stairs or not, and the type of service in charge, and so on. Secondly, considerations on the fabrics in terms of sweat absorption, tactility, weight and so on should be prioritized emphasizing a functional aspect. Thirdly, a sleeve should be narrower and shorter, and the skirt should be less wide and not crease easily. Lastly, a Geogori should be knot-button on with care in order not to be opened and a skirt should be zipped up.

• 한국의상디자인학회지
• /
• 제14권1호
• /
• pp.31-42
• /
• 2012

This study focuses on the establishment of the medical practitioners' brand image through uniforms design developments and the need for recognition, which follows the globalization and evolution of the medical industry. It also embodies public healthcare management services, as well as works to develop a unified design for nurse uniforms at the Gyeonggi provincial medical center in order to place it as a foothold hospital in the region. The results of the study are as follows: First, the symbols of nurse uniforms were divided into external and internal definitions. However, when comparing the uniforms of university hospitals and Gyeonggi provincial medical center, the nurses of the Gyeonggi provincial medical center preferred a uniform that had a strong symbolic meaning. Second, the functionality of nurse uniforms included management of uniforms, sewing, and measurements as important elements. Also, it was found that medical center nurses prefer materials with high functionality. Third, the aesthetics of nurse uniforms and decoration, which includes the external shape and popular influences, were displayed. Also, medical center nurses have a higher preference in external aesthetics than university hospital employees. The results of this study were used as the basis for the development of the design for the Gyeonggi provincial medical center nurse uniforms, which are as follows. First, in terms of symbolism, active application of the Gyeonggi provincial medical center's brand image and medical practitioners such as the Gyeonggi provincial medical center's logo were applied to establish a unified image. Second, in terms of functionality, consideration of the special working conditions and activities were taken into place through the use of functional materials and details to create superior application and efficient work performance. Third, in terms of beauty, bright and neat colors as well as pleasantries were emphasized to create a professional image that will reel in confidence from the patients.

• 한국융합학회논문지
• /
• 제5권2호
• /
• pp.13-18
• /
• 2014

본 연구에서는 굴착기에서의 리퍼의 형상에 따른 구조 및 진동, 피로해석을 하였다. 2가지의 모델들 모두, 작업장치의 바디와 이어지는 축에서 최대 응력이 발생하였고 최대 변형량은 직접작업부에서 발생하였다. Model 1이 Model 2 보다 내구성면에서 구조적으로 더 안정적이라고 사료된다. 불규칙 피로 하중들 중에서는 하중의 변화가 극심한 'SAE bracket history'의 경우가 대체적으로 가장 불안정한 경향을 보이고 있고, 비교적 하중의 변화가 완만한 'Sample history'의 경우가 가장 안정함을 보이고 있다. 본 연구의 결과를 종합하여 굴착기에서의 리퍼의 설계에 응용한다면, 그 파손 방지 및 내구성을 검토하여 그 설계에 유용하게 활용될 것으로 사료된다.